Merge bk://ppc.bkbits.net/for-linus-ppc

into ppc970.osdl.org:/home/torvalds/v2.6/linux

arch/ppc/4xx_io/serial_sicc.c

@@ -763,7 +763,7 @@ static void siccuart_change_speed(struct SICC_info *info, struct termios *old_te
 
     cflag = info->tty->termios->c_cflag;
 
-#if DEBUG
+#ifdef DEBUG
     printk("siccuart_set_cflag(0x%x) called\n", cflag);
 #endif
     /* byte size and parity */
@@ -1027,7 +1027,7 @@ static void siccuart_flush_buffer(struct tty_struct *tty)
     struct SICC_info *info = tty->driver_data;
     unsigned long flags;
 
-#if DEBUG
+#ifdef DEBUG
     printk("siccuart_flush_buffer(%d) called\n", tty->index);
 #endif
     save_flags(flags); cli();
@@ -1433,7 +1433,7 @@ static void siccuart_close(struct tty_struct *tty, struct file *filp)
 
     state = info->state;
 
-#if DEBUG
+#ifdef DEBUG
     //printk("siccuart_close() called\n");
 #endif
 
@@ -1544,7 +1544,7 @@ static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout)
         timeout = 2 * info->timeout;
 
     expire = jiffies + timeout;
-#if DEBUG
+#ifdef DEBUG
     printk("siccuart_wait_until_sent(%d), jiff=%lu, expire=%lu  char_time=%lu...\n",
            tty->index, jiffies,
            expire, char_time);
@@ -1831,7 +1831,7 @@ static int siccuart_console_read(struct console *co, const char *s, u_int count)
     unsigned int status;
     char *w;
     int c;
-#if DEBUG
+#ifdef DEBUG
     printk("siccuart_console_read() called\n");
 #endif
 

arch/ppc/8260_io/uart.c

@@ -155,7 +155,7 @@ static unsigned long break_pressed; /* break, really ... */
 static struct serial_state rs_table[] = {
 	/* UART CLK   PORT          IRQ      FLAGS  NUM   */
 	{ 0,     0, PROFF_SMC1, SIU_INT_SMC1,   0,    0 },    /* SMC1 ttyS0 */
-#if USE_SMC2
+#ifdef USE_SMC2
 	{ 0,     0, PROFF_SMC2, SIU_INT_SMC2,   0,    1 },    /* SMC2 ttyS1 */
 #endif
 #ifndef CONFIG_SCC1_ENET
@@ -2565,7 +2565,7 @@ static int __init rs_8xx_init(void)
 	io->iop_pdird |= 0x00400000;
 	io->iop_pdird &= ~0x00800000;
 	io->iop_psord &= ~0x00c00000;
-#if USE_SMC2
+#ifdef USE_SMC2
 	io->iop_ppara |= 0x00c00000;
 	io->iop_pdira |= 0x00400000;
 	io->iop_pdira &= ~0x00800000;

arch/ppc/Kconfig

@@ -609,7 +609,7 @@ config PPC_OF
 
 config PPC_GEN550
 	bool
-	depends on SANDPOINT || MCPN765 || SPRUCE || PPLUS
+	depends on SANDPOINT || MCPN765 || SPRUCE || PPLUS || PCORE
 	default y
 
 config FORCE
@@ -627,9 +627,14 @@ config EPIC_SERIAL_MODE
 	depends on 6xx && (LOPEC || SANDPOINT)
 	default y
 
+config MPC10X_BRIDGE
+	bool
+	depends on PCORE || POWERPMC250 || LOPEC || SANDPOINT
+	default y
+
 config MPC10X_STORE_GATHERING
 	bool "Enable MPC10x store gathering"
-	depends on FORCE || SANDPOINT
+	depends on MPC10X_BRIDGE
 
 config CPC710_DATA_GATHERING
 	bool "Enable CPC710 data gathering"

arch/ppc/boot/images/Makefile

@@ -13,7 +13,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE
 $(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,gzip)
 
-quite_cmd_uimage = UIMAGE $@
+quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A ppc -O linux -T kernel \
                -C gzip -a 00000000 -e 00000000 -n 'Linux-$(KERNELRELEASE)' \
                -d $< $@

arch/ppc/boot/openfirmware/Makefile

@@ -75,7 +75,7 @@ $(obj)/image.initrd.o: $(obj)/image.o $(images)/ramdisk.image.gz FORCE
 	$(call if_changed,genimage-initrd)
 
 # Create the note section for New-World PowerMacs.
-quit_cmd_mknote  = MKNOTE  $@
+quiet_cmd_mknote = MKNOTE  $@
      cmd_mknote  = $(utils)/mknote > $@
 targets		+= note
 $(obj)/note: $(utils)/mknote FORCE

arch/ppc/boot/simple/misc-embedded.c

@@ -8,7 +8,6 @@
 
 #include <linux/config.h>
 #include <linux/types.h>
-#include <linux/elf.h>
 #include <linux/string.h>
 #include <asm/bootinfo.h>
 #include <asm/mmu.h>

arch/ppc/boot/simple/misc.c

@@ -17,7 +17,6 @@
  */
 
 #include <linux/types.h>
-#include <linux/elf.h>
 #include <linux/config.h>
 #include <linux/string.h>
 

arch/ppc/configs/mcpn765_defconfig

@@ -4,49 +4,65 @@
 CONFIG_MMU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_HAVE_DEC_LOCK=y
+CONFIG_PPC=y
+CONFIG_PPC32=y
+CONFIG_GENERIC_NVRAM=y
 
 #
 # Code maturity level options
 #
-CONFIG_EXPERIMENTAL=y
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_CLEAN_COMPILE=y
+CONFIG_STANDALONE=y
+CONFIG_BROKEN_ON_SMP=y
 
 #
 # General setup
 #
-CONFIG_SWAP=y
+# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_EMBEDDED is not set
+# CONFIG_HOTPLUG is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 
 #
 # Loadable module support
 #
-# CONFIG_MODULES is not set
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_KMOD is not set
 
 #
-# Platform support
+# Processor
 #
-CONFIG_PPC=y
-CONFIG_PPC32=y
 CONFIG_6xx=y
 # CONFIG_40x is not set
+# CONFIG_44x is not set
 # CONFIG_POWER3 is not set
+# CONFIG_POWER4 is not set
 # CONFIG_8xx is not set
+CONFIG_ALTIVEC=y
+# CONFIG_TAU is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_PPC_STD_MMU=y
 
 #
-# IBM 4xx options
+# Platform options
 #
-# CONFIG_8260 is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_STD_MMU=y
 # CONFIG_PPC_MULTIPLATFORM is not set
 # CONFIG_APUS is not set
-# CONFIG_WILLOW_2 is not set
+# CONFIG_WILLOW is not set
 # CONFIG_PCORE is not set
 # CONFIG_POWERPMC250 is not set
 # CONFIG_EV64260 is not set
@@ -62,33 +78,28 @@ CONFIG_MCPN765=y
 # CONFIG_K2 is not set
 # CONFIG_PAL4 is not set
 # CONFIG_GEMINI is not set
+# CONFIG_EST8260 is not set
+# CONFIG_SBS8260 is not set
+# CONFIG_RPX6 is not set
+# CONFIG_TQM8260 is not set
+CONFIG_PPC_GEN550=y
 # CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
 CONFIG_HIGHMEM=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_KCORE_ELF=y
 CONFIG_KERNEL_ELF=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-# CONFIG_HOTPLUG is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="ip=on"
 
 #
-# Parallel port support
+# Bus options
 #
-# CONFIG_PARPORT is not set
-# CONFIG_PPC601_SYNC_FIX is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_LEGACY_PROC is not set
+# CONFIG_PCI_NAMES is not set
 
 #
 # Advanced setup
@@ -104,20 +115,27 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_TASK_SIZE=0x80000000
 CONFIG_BOOT_LOAD=0x00800000
 
+#
+# Device Drivers
+#
+
 #
 # Generic Driver Options
 #
-# CONFIG_FW_LOADER is not set
 
 #
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
 
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
 #
 # Plug and Play support
 #
-# CONFIG_PNP is not set
 
 #
 # Block devices
@@ -126,36 +144,85 @@ CONFIG_BOOT_LOAD=0x00800000
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_CARMEL is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_LBD is not set
 
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
 #
 # ATA/ATAPI/MFM/RLL support
 #
-# CONFIG_IDE is not set
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_IDEDISK_STROKE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_IDEDMA_PCI_AUTO is not set
+CONFIG_BLK_DEV_ADMA=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+CONFIG_BLK_DEV_VIA82CXXX=y
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_SCSI is not set
 
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
-# IEEE 1394 (FireWire) support (EXPERIMENTAL)
+# IEEE 1394 (FireWire) support
 #
 # CONFIG_IEEE1394 is not set
 
@@ -164,6 +231,10 @@ CONFIG_BLK_DEV_INITRD=y
 #
 # CONFIG_I2O is not set
 
+#
+# Macintosh device drivers
+#
+
 #
 # Networking support
 #
@@ -175,7 +246,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 # CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -187,32 +257,17 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
 # CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
 # CONFIG_DECNET is not set
 # CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_FASTROUTE is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
 
 #
 # QoS and/or fair queueing
@@ -233,7 +288,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -248,26 +302,15 @@ CONFIG_MII=y
 #
 # Tulip family network device support
 #
-# CONFIG_NET_TULIP is not set
+CONFIG_NET_TULIP=y
+CONFIG_TULIP=y
+# CONFIG_TULIP_MMIO is not set
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
 # CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
+# CONFIG_NET_PCI is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -277,7 +320,6 @@ CONFIG_NET_PCI=y
 # CONFIG_E1000 is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
@@ -287,7 +329,6 @@ CONFIG_NET_PCI=y
 #
 # CONFIG_IXGB is not set
 # CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 
@@ -297,10 +338,9 @@ CONFIG_NET_PCI=y
 # CONFIG_NET_RADIO is not set
 
 #
-# Token Ring devices (depends on LLC=y)
+# Token Ring devices
 #
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
+# CONFIG_TR is not set
 
 #
 # Wan interfaces
@@ -317,15 +357,22 @@ CONFIG_NET_PCI=y
 #
 # CONFIG_IRDA is not set
 
+#
+# Bluetooth support
+#
+# CONFIG_BT is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
 #
 # ISDN subsystem
 #
-# CONFIG_ISDN_BOOL is not set
+# CONFIG_ISDN is not set
 
 #
-# Graphics support
+# Telephony Support
 #
-# CONFIG_FB is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -342,18 +389,16 @@ CONFIG_NET_PCI=y
 # CONFIG_GAMEPORT is not set
 CONFIG_SOUND_GAMEPORT=y
 # CONFIG_SERIO is not set
+# CONFIG_SERIO_I8042 is not set
 
 #
 # Input Device Drivers
 #
 
-#
-# Macintosh device drivers
-#
-
 #
 # Character devices
 #
+# CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -361,6 +406,7 @@ CONFIG_SOUND_GAMEPORT=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -369,26 +415,8 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_QIC02_TAPE is not set
 
 #
@@ -414,7 +442,15 @@ CONFIG_GEN_RTC=y
 # CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Misc devices
+#
 
 #
 # Multimedia devices
@@ -426,10 +462,31 @@ CONFIG_GEN_RTC=y
 #
 # CONFIG_DVB is not set
 
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
 #
 # File systems
 #
-# CONFIG_EXT2_FS is not set
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
@@ -457,21 +514,16 @@ CONFIG_GEN_RTC=y
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
+CONFIG_PROC_KCORE=y
 # CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 
 #
 # Miscellaneous filesystems
 #
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
@@ -484,19 +536,15 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 # CONFIG_EXPORTFS is not set
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
 
 #
 # Partition Types
@@ -505,25 +553,14 @@ CONFIG_SUNRPC=y
 CONFIG_MSDOS_PARTITION=y
 
 #
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
+# Native Language Support
 #
-# CONFIG_BT is not set
+# CONFIG_NLS is not set
 
 #
 # Library routines
 #
-# CONFIG_CRC32 is not set
+CONFIG_CRC32=y
 
 #
 # Kernel hacking

arch/ppc/configs/pcore_defconfig

@@ -4,11 +4,17 @@
 CONFIG_MMU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_HAVE_DEC_LOCK=y
+CONFIG_PPC=y
+CONFIG_PPC32=y
+CONFIG_GENERIC_NVRAM=y
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_STANDALONE=y
+CONFIG_BROKEN_ON_SMP=y
 
 #
 # General setup
@@ -18,9 +24,16 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_EMBEDDED is not set
+# CONFIG_HOTPLUG is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 
 #
 # Loadable module support
@@ -33,24 +46,25 @@ CONFIG_OBSOLETE_MODPARM=y
 CONFIG_KMOD=y
 
 #
-# Platform support
+# Processor
 #
-CONFIG_PPC=y
-CONFIG_PPC32=y
 CONFIG_6xx=y
 # CONFIG_40x is not set
+# CONFIG_44x is not set
 # CONFIG_POWER3 is not set
+# CONFIG_POWER4 is not set
 # CONFIG_8xx is not set
+CONFIG_ALTIVEC=y
+# CONFIG_TAU is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_PPC_STD_MMU=y
 
 #
-# IBM 4xx options
+# Platform options
 #
-# CONFIG_8260 is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_STD_MMU=y
 # CONFIG_PPC_MULTIPLATFORM is not set
 # CONFIG_APUS is not set
-# CONFIG_WILLOW_2 is not set
+# CONFIG_WILLOW is not set
 CONFIG_PCORE=y
 # CONFIG_POWERPMC250 is not set
 # CONFIG_EV64260 is not set
@@ -66,35 +80,30 @@ CONFIG_PCORE=y
 # CONFIG_K2 is not set
 # CONFIG_PAL4 is not set
 # CONFIG_GEMINI is not set
+# CONFIG_EST8260 is not set
+# CONFIG_SBS8260 is not set
+# CONFIG_RPX6 is not set
+# CONFIG_TQM8260 is not set
+CONFIG_PPC_GEN550=y
 CONFIG_FORCE=y
 # CONFIG_MPC10X_STORE_GATHERING is not set
 # CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_KERNEL_ELF=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="ip=on"
 
 #
-# General setup
+# Bus options
 #
-# CONFIG_HIGHMEM is not set
+CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
 # CONFIG_PCI_LEGACY_PROC is not set
 # CONFIG_PCI_NAMES is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-CONFIG_PPC601_SYNC_FIX=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
 
 #
 # Advanced setup
@@ -110,15 +119,27 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_TASK_SIZE=0x80000000
 CONFIG_BOOT_LOAD=0x00800000
 
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+
 #
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
 
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
 #
 # Plug and Play support
 #
-# CONFIG_PNP is not set
 
 #
 # Block devices
@@ -130,24 +151,22 @@ CONFIG_BOOT_LOAD=0x00800000
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_CARMEL is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
+# CONFIG_LBD is not set
 
 #
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
+# ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
 
 #
-# SCSI support
+# SCSI device support
 #
 CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
 
 #
 # SCSI support type (disk, tape, CD-ROM)
@@ -164,9 +183,15 @@ CONFIG_BLK_DEV_SR=y
 #
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_REPORT_LUNS is not set
-CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+
 #
 # SCSI low-level drivers
 #
@@ -176,11 +201,9 @@ CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_AM53C974 is not set
 # CONFIG_SCSI_MEGARAID is not set
+# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_CPQFCTS is not set
 # CONFIG_SCSI_DMX3191D is not set
@@ -188,39 +211,40 @@ CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C7xx is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_NCR53C8XX is not set
-CONFIG_SCSI_SYM53C8XX=y
-CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
-CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
-CONFIG_SCSI_NCR53C8XX_SYNC=20
-# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
-# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set
-# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
 # CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA6322 is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_U14_34F is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
 #
 # Fusion MPT device support
 #
 # CONFIG_FUSION is not set
 
 #
-# IEEE 1394 (FireWire) support (EXPERIMENTAL)
+# IEEE 1394 (FireWire) support
 #
 # CONFIG_IEEE1394 is not set
 
@@ -229,6 +253,10 @@ CONFIG_SCSI_NCR53C8XX_SYNC=20
 #
 # CONFIG_I2O is not set
 
+#
+# Macintosh device drivers
+#
+
 #
 # Networking support
 #
@@ -240,8 +268,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 # CONFIG_NETLINK_DEV is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -255,12 +281,21 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
 # CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
 # CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_DECNET is not set
+# CONFIG_BRIDGE is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
 #
 # IP: Netfilter Configuration
 #
@@ -272,11 +307,13 @@ CONFIG_IP_NF_IRC=m
 # CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
+# CONFIG_IP_NF_MATCH_IPRANGE is not set
 CONFIG_IP_NF_MATCH_MAC=m
 CONFIG_IP_NF_MATCH_PKTTYPE=m
 CONFIG_IP_NF_MATCH_MARK=m
 CONFIG_IP_NF_MATCH_MULTIPORT=m
 CONFIG_IP_NF_MATCH_TOS=m
+# CONFIG_IP_NF_MATCH_RECENT is not set
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_DSCP=m
 CONFIG_IP_NF_MATCH_AH_ESP=m
@@ -286,15 +323,15 @@ CONFIG_IP_NF_MATCH_TCPMSS=m
 CONFIG_IP_NF_MATCH_HELPER=m
 CONFIG_IP_NF_MATCH_STATE=m
 CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_UNCLEAN=m
 CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_MIRROR=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
 # CONFIG_IP_NF_NAT_LOCAL is not set
 # CONFIG_IP_NF_NAT_SNMP_BASIC is not set
 CONFIG_IP_NF_NAT_IRC=m
@@ -305,21 +342,19 @@ CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
+# CONFIG_IP_NF_ARP_MANGLE is not set
 CONFIG_IP_NF_COMPAT_IPCHAINS=m
 # CONFIG_IP_NF_COMPAT_IPFWADM is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
 #
-CONFIG_IPV6_SCTP__=y
 # CONFIG_IP_SCTP is not set
 # CONFIG_ATM is not set
 # CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
 # CONFIG_NET_DIVERT is not set
@@ -347,7 +382,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -362,13 +396,22 @@ CONFIG_MII=y
 #
 # Tulip family network device support
 #
-# CONFIG_NET_TULIP is not set
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+CONFIG_TULIP=y
+# CONFIG_TULIP_MWI is not set
+# CONFIG_TULIP_MMIO is not set
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
 # CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
 # CONFIG_DGRS is not set
 CONFIG_EEPRO100=y
 # CONFIG_EEPRO100_PIO is not set
@@ -394,6 +437,7 @@ CONFIG_EEPRO100=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 
@@ -412,11 +456,13 @@ CONFIG_EEPRO100=y
 # CONFIG_NET_RADIO is not set
 
 #
-# Token Ring devices (depends on LLC=y)
+# Token Ring devices
 #
+# CONFIG_TR is not set
 # CONFIG_NET_FC is not set
 # CONFIG_RCPCI is not set
 # CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
 
 #
 # Wan interfaces
@@ -434,19 +480,21 @@ CONFIG_EEPRO100=y
 # CONFIG_IRDA is not set
 
 #
-# ISDN subsystem
+# Bluetooth support
 #
-# CONFIG_ISDN_BOOL is not set
+# CONFIG_BT is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
-# Graphics support
+# ISDN subsystem
 #
-# CONFIG_FB is not set
+# CONFIG_ISDN is not set
 
 #
-# Old CD-ROM drivers (not SCSI, not IDE)
+# Telephony Support
 #
-# CONFIG_CD_NO_IDESCSI is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -463,18 +511,16 @@ CONFIG_EEPRO100=y
 # CONFIG_GAMEPORT is not set
 CONFIG_SOUND_GAMEPORT=y
 # CONFIG_SERIO is not set
+# CONFIG_SERIO_I8042 is not set
 
 #
 # Input Device Drivers
 #
 
-#
-# Macintosh device drivers
-#
-
 #
 # Character devices
 #
+# CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -482,6 +528,7 @@ CONFIG_SOUND_GAMEPORT=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -490,26 +537,8 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-CONFIG_BUSMOUSE=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_QIC02_TAPE is not set
 
 #
@@ -535,7 +564,15 @@ CONFIG_GEN_RTC=y
 # CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Misc devices
+#
 
 #
 # Multimedia devices
@@ -547,6 +584,26 @@ CONFIG_GEN_RTC=y
 #
 # CONFIG_DVB is not set
 
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
 #
 # File systems
 #
@@ -584,10 +641,11 @@ CONFIG_FS_MBCACHE=y
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
 # CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
 # CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 
 #
@@ -596,6 +654,7 @@ CONFIG_RAMFS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
@@ -612,12 +671,13 @@ CONFIG_RAMFS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 # CONFIG_EXPORTFS is not set
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
@@ -632,31 +692,20 @@ CONFIG_SUNRPC=y
 CONFIG_MSDOS_PARTITION=y
 
 #
-# Sound
+# Native Language Support
 #
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
+# CONFIG_NLS is not set
 
 #
 # Library routines
 #
-# CONFIG_CRC32 is not set
+CONFIG_CRC32=y
 
 #
 # Kernel hacking
 #
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
+# CONFIG_SERIAL_TEXT_DEBUG is not set
 
 #
 # Security options

arch/ppc/kernel/cputable.c

@@ -53,10 +53,19 @@ extern void __setup_cpu_generic(unsigned long offset, int cpu_nr, struct cpu_spe
 #define PPC_FEATURE_ALTIVEC_COMP       	0
 #endif
 
+/* We need to mark all pages as being coherent if we're SMP or we
+ * have a 754x and an MPC107 host bridge. */
+#if defined(CONFIG_SMP) || defined(CONFIG_MPC10X_BRIDGE)
+#define CPU_FTR_COMMON                  CPU_FTR_NEED_COHERENT
+#else
+#define CPU_FTR_COMMON                  0
+#endif
+
 struct cpu_spec	cpu_specs[] = {
 #if CLASSIC_PPC
     { 	/* 601 */
 	0xffff0000, 0x00010000, "601",
+	CPU_FTR_COMMON |
 	CPU_FTR_601 | CPU_FTR_HPTE_TABLE,
 	COMMON_PPC | PPC_FEATURE_601_INSTR | PPC_FEATURE_UNIFIED_CACHE,
 	32, 32,
@@ -64,6 +73,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* 603 */
     	0xffff0000, 0x00030000, "603",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
     	CPU_FTR_CAN_NAP,
 	COMMON_PPC,
@@ -72,6 +82,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* 603e */
     	0xffff0000, 0x00060000, "603e",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
     	CPU_FTR_CAN_NAP,
 	COMMON_PPC,
@@ -80,6 +91,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* 603ev */
     	0xffff0000, 0x00070000, "603ev",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
     	CPU_FTR_CAN_NAP,
 	COMMON_PPC,
@@ -88,6 +100,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* 604 */
     	0xffff0000, 0x00040000, "604",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_604_PERF_MON |
 	CPU_FTR_HPTE_TABLE,
 	COMMON_PPC,
@@ -96,6 +109,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* 604e */
     	0xfffff000, 0x00090000, "604e",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_604_PERF_MON |
 	CPU_FTR_HPTE_TABLE,
 	COMMON_PPC,
@@ -104,6 +118,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* 604r */
     	0xffff0000, 0x00090000, "604r",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_604_PERF_MON |
 	CPU_FTR_HPTE_TABLE,
 	COMMON_PPC,
@@ -112,6 +127,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* 604ev */
     	0xffff0000, 0x000a0000, "604ev",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_604_PERF_MON |
 	CPU_FTR_HPTE_TABLE,
 	COMMON_PPC,
@@ -120,6 +136,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* 740/750 (0x4202, don't support TAU ?) */
     	0xffffffff, 0x00084202, "740/750",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
 	CPU_FTR_L2CR | CPU_FTR_HPTE_TABLE | CPU_FTR_CAN_NAP,
 	COMMON_PPC,
@@ -128,6 +145,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* 745/755 */
     	0xfffff000, 0x00083000, "745/755",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
 	CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_CAN_NAP,
 	COMMON_PPC,
@@ -136,6 +154,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* 750CX (80100 and 8010x?) */
     	0xfffffff0, 0x00080100, "750CX",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
 	CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_CAN_NAP,
 	COMMON_PPC,
@@ -144,6 +163,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* 750CX (82201 and 82202) */
     	0xfffffff0, 0x00082200, "750CX",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
 	CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_CAN_NAP,
 	COMMON_PPC,
@@ -152,6 +172,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* 750CXe (82214) */
     	0xfffffff0, 0x00082210, "750CXe",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
 	CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_CAN_NAP,
 	COMMON_PPC,
@@ -160,6 +181,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* 750FX rev 1.x */
     	0xffffff00, 0x70000100, "750FX",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
 	CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_CAN_NAP |
 	CPU_FTR_DUAL_PLL_750FX | CPU_FTR_NO_DPM,
@@ -169,6 +191,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* 750FX rev 2.0 must disable HID0[DPM] */
     	0xffffffff, 0x70000200, "750FX",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
 	CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_CAN_NAP |
 	CPU_FTR_NO_DPM,
@@ -178,6 +201,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* 750FX (All revs except 2.0) */
     	0xffff0000, 0x70000000, "750FX",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
 	CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_CAN_NAP |
 	CPU_FTR_DUAL_PLL_750FX | CPU_FTR_HAS_HIGH_BATS,
@@ -188,6 +212,7 @@ struct cpu_spec	cpu_specs[] = {
 
     {	/* 740/750 (L2CR bit need fixup for 740) */
     	0xffff0000, 0x00080000, "740/750",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
 	CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_CAN_NAP,
 	COMMON_PPC,
@@ -196,6 +221,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* 7400 rev 1.1 ? (no TAU) */
     	0xffffffff, 0x000c1101, "7400 (1.1)",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
 	CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE |
 	CPU_FTR_CAN_NAP,
@@ -205,6 +231,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* 7400 */
     	0xffff0000, 0x000c0000, "7400",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
 	CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE |
 	CPU_FTR_CAN_NAP,
@@ -214,6 +241,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* 7410 */
     	0xffff0000, 0x800c0000, "7410",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
 	CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE |
 	CPU_FTR_CAN_NAP,
@@ -223,6 +251,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* 7450 2.0 - no doze/nap */
     	0xffffffff, 0x80000200, "7450",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
 	CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
 	CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450,
@@ -232,6 +261,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* 7450 2.1 */
     	0xffffffff, 0x80000201, "7450",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_CAN_NAP |
 	CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
 	CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR |
@@ -242,6 +272,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* 7450 2.3 and newer */
     	0xffff0000, 0x80000000, "7450",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_CAN_NAP |
 	CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
 	CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR,
@@ -251,6 +282,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* 7455 rev 1.x */
     	0xffffff00, 0x80010100, "7455",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
 	CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
 	CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_HAS_HIGH_BATS,
@@ -260,6 +292,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* 7455 rev 2.0 */
     	0xffffffff, 0x80010200, "7455",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_CAN_NAP |
 	CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
 	CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR |
@@ -270,6 +303,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* 7455 others */
     	0xffff0000, 0x80010000, "7455",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_CAN_NAP |
 	CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
 	CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR |
@@ -280,6 +314,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* 7457 */
     	0xffff0000, 0x80020000, "7457",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_CAN_NAP |
 	CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
 	CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR |
@@ -290,6 +325,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* 82xx (8240, 8245, 8260 are all 603e cores) */
 	0x7fff0000, 0x00810000, "82xx",
+	CPU_FTR_COMMON |
 	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB,
 	COMMON_PPC,
 	32, 32,
@@ -297,6 +333,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* default match, we assume split I/D cache & TB (non-601)... */
     	0x00000000, 0x00000000, "(generic PPC)",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE,
 	COMMON_PPC,
 	32, 32,
@@ -306,6 +343,7 @@ struct cpu_spec	cpu_specs[] = {
 #ifdef CONFIG_PPC64BRIDGE
     {	/* Power3 */
     	0xffff0000, 0x00400000, "Power3 (630)",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE,
     	COMMON_PPC | PPC_FEATURE_64,
 	128, 128,
@@ -313,6 +351,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* Power3+ */
     	0xffff0000, 0x00410000, "Power3 (630+)",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE,
     	COMMON_PPC | PPC_FEATURE_64,
 	128, 128,
@@ -320,6 +359,7 @@ struct cpu_spec	cpu_specs[] = {
     },
 	{	/* I-star */
 		0xffff0000, 0x00360000, "I-star",
+		CPU_FTR_COMMON |
 		CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE,
 		COMMON_PPC | PPC_FEATURE_64,
 		128, 128,
@@ -327,6 +367,7 @@ struct cpu_spec	cpu_specs[] = {
 	},
 	{	/* S-star */
 		0xffff0000, 0x00370000, "S-star",
+		CPU_FTR_COMMON |
 		CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE,
 		COMMON_PPC | PPC_FEATURE_64,
 		128, 128,
@@ -336,6 +377,7 @@ struct cpu_spec	cpu_specs[] = {
 #ifdef CONFIG_POWER4
     {	/* Power4 */
     	0xffff0000, 0x00350000, "Power4",
+	CPU_FTR_COMMON |
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE,
     	COMMON_PPC | PPC_FEATURE_64,
 	128, 128,
@@ -343,6 +385,7 @@ struct cpu_spec	cpu_specs[] = {
     },
     {	/* PPC970 */
 	0xffff0000, 0x00390000, "PPC970",
+	CPU_FTR_COMMON |
 	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
 	CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP,
 	COMMON_PPC | PPC_FEATURE_64 | PPC_FEATURE_ALTIVEC_COMP,
@@ -494,7 +537,7 @@ struct cpu_spec	cpu_specs[] = {
 #if !CLASSIC_PPC
     {	/* default match */
     	0x00000000, 0x00000000, "(generic PPC)",
-    	0,
+	CPU_FTR_COMMON,
     	PPC_FEATURE_32,
 	32, 32,
 	0,

arch/ppc/kernel/process.c

@@ -273,8 +273,8 @@ void show_regs(struct pt_regs * regs)
 	trap = TRAP(regs);
 	if (trap == 0x300 || trap == 0x600)
 		printk("DAR: %08lX, DSISR: %08lX\n", regs->dar, regs->dsisr);
-	printk("TASK = %p[%d] '%s' ",
-	       current, current->pid, current->comm);
+	printk("TASK = %p[%d] '%s' THREAD: %p",
+	       current, current->pid, current->comm, current->thread_info);
 	printk("Last syscall: %ld ", current->thread.last_syscall);
 
 #if defined(CONFIG_4xx) && defined(DCRN_PLB0_BEAR)
@@ -303,6 +303,16 @@ void show_regs(struct pt_regs * regs)
 			break;
 	}
 	printk("\n");
+#ifdef CONFIG_KALLSYMS
+	/*
+	 * Lookup NIP late so we have the best change of getting the
+	 * above info out without failing
+	 */
+	printk("NIP [%08lx] ", regs->nip);
+	print_symbol("%s\n", regs->nip);
+	printk("LR [%08lx] ", regs->link);
+	print_symbol("%s\n", regs->link);
+#endif
 	show_stack(current, (unsigned long *) regs->gpr[1]);
 }
 

arch/ppc/kernel/signal.c

@@ -361,7 +361,7 @@ handle_rt_signal(unsigned long sig, struct k_sigaction *ka,
 	return;
 
 badframe:
-#if DEBUG_SIG
+#ifdef DEBUG_SIG
 	printk("badframe in handle_rt_signal, regs=%p frame=%p newsp=%lx\n",
 	       regs, frame, newsp);
 #endif
@@ -513,7 +513,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 	return;
 
 badframe:
-#if DEBUG_SIG
+#ifdef DEBUG_SIG
 	printk("badframe in handle_signal, regs=%p frame=%lx newsp=%lx\n",
 	       regs, frame, *newspp);
 #endif

arch/ppc/mm/hashtable.S

@@ -346,9 +346,9 @@ _GLOBAL(create_hpte)
 	rlwimi	r5,r5,32-2,31,31	/* _PAGE_USER -> PP lsb */
 	ori	r8,r8,0xe14		/* clear out reserved bits and M */
 	andc	r8,r5,r8		/* PP = user? (rw&dirty? 2: 3): 0 */
-#ifdef CONFIG_SMP
+BEGIN_FTR_SECTION
 	ori	r8,r8,_PAGE_COHERENT	/* set M (coherence required) */
-#endif
+END_FTR_SECTION_IFSET(CPU_FTR_NEED_COHERENT)
 
 	/* Construct the high word of the PPC-style PTE (r5) */
 #ifndef CONFIG_PPC64BRIDGE

arch/ppc/mm/ppc_mmu.c

@@ -137,10 +137,10 @@ void __init setbat(int index, unsigned long virt, unsigned long phys,
 	int wimgxpp;
 	union ubat *bat = BATS[index];
 
-#ifdef CONFIG_SMP
-	if ((flags & _PAGE_NO_CACHE) == 0)
+	if (((flags & _PAGE_NO_CACHE) == 0) &&
+	    (cur_cpu_spec[0]->cpu_features & CPU_FTR_NEED_COHERENT))
 		flags |= _PAGE_COHERENT;
-#endif
+
 	bl = (size >> 17) - 1;
 	if (PVR_VER(mfspr(PVR)) != 1) {
 		/* 603, 604, etc. */

arch/ppc/platforms/Makefile

@@ -35,11 +35,11 @@ obj-$(CONFIG_EV64260)		+= ev64260_setup.o
 obj-$(CONFIG_GEMINI)		+= gemini_pci.o gemini_setup.o gemini_prom.o
 obj-$(CONFIG_K2)		+= k2_setup.o k2_pci.o
 obj-$(CONFIG_LOPEC)		+= lopec_setup.o lopec_pci.o
-obj-$(CONFIG_MCPN765)		+= mcpn765_setup.o mcpn765_pci.o
+obj-$(CONFIG_MCPN765)		+= mcpn765.o
 obj-$(CONFIG_MENF1)		+= menf1_setup.o menf1_pci.o
 obj-$(CONFIG_MVME5100)		+= mvme5100_setup.o mvme5100_pci.o
 obj-$(CONFIG_PAL4)		+= pal4_setup.o pal4_pci.o
-obj-$(CONFIG_PCORE)		+= pcore_setup.o pcore_pci.o
+obj-$(CONFIG_PCORE)		+= pcore.o
 obj-$(CONFIG_POWERPMC250)	+= powerpmc250.o
 obj-$(CONFIG_PPLUS)		+= pplus.o
 obj-$(CONFIG_PRPMC750)		+= prpmc750_setup.o prpmc750_pci.o

arch/ppc/platforms/gemini_setup.c

@@ -401,12 +401,12 @@ gemini_set_rtc_time( unsigned long now )
 	to_tm( now, &tm );
 
 	reg = gemini_rtc_read(M48T35_RTC_CONTROL);
-#if DEBUG_RTC
+#ifdef DEBUG_RTC
 	printk("set rtc: reg = %x\n", reg);
 #endif
 
 	gemini_rtc_write((reg|M48T35_RTC_SET), M48T35_RTC_CONTROL);
-#if DEBUG_RTC
+#ifdef DEBUG_RTC
 	printk("set rtc: tm vals - sec=%x, min=%x, hour=%x, mon=%x, mday=%x, year=%x\n",
 	       tm.tm_sec, tm.tm_min, tm.tm_hour, tm.tm_mon, tm.tm_mday, tm.tm_year);
 #endif

arch/ppc/platforms/mcpn765_setup.c → arch/ppc/platforms/mcpn765.c

 /*
- * arch/ppc/platforms/mcpn765_setup.c
+ * arch/ppc/platforms/mcpn765.c
  *
  * Board setup routines for the Motorola MCG MCPN765 cPCI Board.
  *
  * Author: Mark A. Greer
  *         mgreer@mvista.com
  *
+ * Modified by Randy Vinson (rvinson@mvista.com)
+ *
  * 2001-2002 (c) MontaVista, Software, Inc.  This file is licensed under
  * the terms of the GNU General Public License version 2.  This program
  * is licensed "as is" without any warranty of any kind, whether express
@@ -28,18 +30,22 @@
 #include <linux/console.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
+#if 0
 #include <linux/ide.h>
+#endif
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
 #include <linux/serial.h>
 #include <linux/tty.h>	/* for linux/serial_core.h */
 #include <linux/serial_core.h>
+#include <linux/slab.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/time.h>
 #include <asm/dma.h>
+#include <asm/byteorder.h>
 #include <asm/io.h>
 #include <asm/machdep.h>
 #include <asm/prom.h>
@@ -48,8 +54,10 @@
 #include <asm/i8259.h>
 #include <asm/todc.h>
 #include <asm/pci-bridge.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
 #include <asm/bootinfo.h>
-#include <asm/pplus.h>
+#include <asm/hawk.h>
 #include <asm/kgdb.h>
 
 #include "mcpn765.h"
@@ -75,69 +83,229 @@ static u_char mcpn765_openpic_initsenses[] __initdata = {
 	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 31: RTC Alarm */
 };
 
+extern void mcpn765_set_VIA_IDE_native(void);
 
 extern u_int openpic_irq(void);
 extern char cmd_line[];
 
+extern void gen550_progress(char *, unsigned short);
+extern void gen550_init(int, struct uart_port *);
+
 int use_of_interrupt_tree = 0;
 
 static void mcpn765_halt(void);
 
 TODC_ALLOC();
 
-#if defined(CONFIG_SERIAL_8250) && \
-	(defined(CONFIG_KGDB) || defined(CONFIG_SERIAL_TEXT_DEBUG))
-static void __init
-mcpn765_early_serial_map(void)
+/*
+ * Motorola MCG MCPN765 interrupt routing.
+ */
+static inline int
+mcpn765_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+	static char pci_irq_table[][4] =
+	/*
+	 *	PCI IDSEL/INTPIN->INTLINE
+	 * 	   A   B   C   D
+	 */
+	{
+		{ 14,  0,  0,  0 },	/* IDSEL 11 - have to manually set */
+		{  0,  0,  0,  0 },	/* IDSEL 12 - unused */
+		{  0,  0,  0,  0 },	/* IDSEL 13 - unused */
+		{ 18,  0,  0,  0 },	/* IDSEL 14 - Enet 0 */
+		{  0,  0,  0,  0 },	/* IDSEL 15 - unused */
+		{ 25, 26, 27, 28 },	/* IDSEL 16 - PMC Slot 1 */
+		{ 28, 25, 26, 27 },	/* IDSEL 17 - PMC Slot 2 */
+		{  0,  0,  0,  0 },	/* IDSEL 18 - PMC 2B Connector XXXX */
+		{ 29,  0,  0,  0 },	/* IDSEL 19 - Enet 1 */
+		{ 20,  0,  0,  0 },	/* IDSEL 20 - 21554 cPCI bridge */
+	};
+
+	const long min_idsel = 11, max_idsel = 20, irqs_per_slot = 4;
+	return PCI_IRQ_TABLE_LOOKUP;
+}
+
+void __init
+mcpn765_set_VIA_IDE_legacy(void)
 {
-	struct uart_port serial_req;
+	unsigned short vend, dev;
+
+	early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend);
+	early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev);
+
+	if ((vend == PCI_VENDOR_ID_VIA) &&
+	    (dev == PCI_DEVICE_ID_VIA_82C586_1)) {
+
+		unsigned char temp;
+
+		/* put back original "standard" port base addresses */
+		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
+				         PCI_BASE_ADDRESS_0, 0x1f1);
+		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
+				         PCI_BASE_ADDRESS_1, 0x3f5);
+		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
+				         PCI_BASE_ADDRESS_2, 0x171);
+		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
+				         PCI_BASE_ADDRESS_3, 0x375);
+		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
+				         PCI_BASE_ADDRESS_4, 0xcc01);
+
+		/* put into legacy mode */
+		early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
+				       &temp);
+		temp &= ~0x05;
+		early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
+					temp);
+	}
+}
 
-	/* Setup serial port access */
-	memset(&serial_req, 0, sizeof(serial_req));
-	serial_req.uartclk = UART_CLK;
-	serial_req.irq = 17;
-	serial_req.flags = STD_COM_FLAGS;
-	serial_req.iotype = SERIAL_IO_MEM;
-	serial_req.membase = (u_char *)MCPN765_SERIAL_1;
-	serial_req.regshift = 4;
+void
+mcpn765_set_VIA_IDE_native(void)
+{
+	unsigned short vend, dev;
+
+	early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend);
+	early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev);
 
-	gen550_init(0, &serial_req);
+	if ((vend == PCI_VENDOR_ID_VIA) &&
+	    (dev == PCI_DEVICE_ID_VIA_82C586_1)) {
 
-	if (early_serial_setup(&serial_req) != 0)
-		printk(KERN_ERR "Early serial init of port 0 failed\n");
+		unsigned char temp;
 
-	/* Assume early_serial_setup() doesn't modify serial_req */
-	serial_req.line = 1;
-	serial_req.irq = 17;
-	serial_req.membase = (u_char *)MCPN765_SERIAL_2;
+		/* put into native mode */
+		early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
+				       &temp);
+		temp |= 0x05;
+		early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
+					temp);
+	}
+}
 
-	gen550_init(1, &serial_req);
+/*
+ * Initialize the VIA 82c586b.
+ */
+static void __init
+mcpn765_setup_via_82c586b(void)
+{
+	struct pci_dev	*dev;
+	u_char		c;
+
+	if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
+				   PCI_DEVICE_ID_VIA_82C586_0,
+				   NULL)) == NULL) {
+		printk("No VIA ISA bridge found\n");
+		mcpn765_halt();
+		/* NOTREACHED */
+	}
+
+	/*
+	 * If the firmware left the EISA 4d0/4d1 ports enabled, make sure
+	 * IRQ 14 is set for edge.
+	 */
+	pci_read_config_byte(dev, 0x47, &c);
 
-	if (early_serial_setup(&serial_req) != 0)
-		printk(KERN_ERR "Early serial init of port 1 failed\n");
+	if (c & (1<<5)) {
+		c = inb(0x4d1);
+		c &= ~(1<<6);
+		outb(c, 0x4d1);
+	}
 
-	/* Assume early_serial_setup() doesn't modify serial_req */
-	serial_req.line = 2;
-	serial_req.irq = 17;
-	serial_req.membase = (u_char *)MCPN765_SERIAL_3;
+	/* Disable PNP IRQ routing since we use the Hawk's MPIC */
+	pci_write_config_dword(dev, 0x54, 0);
+	pci_write_config_byte(dev, 0x58, 0);
 
-	gen550_init(2, &serial_req);
 
-	if (early_serial_setup(&serial_req) != 0)
-		printk(KERN_ERR "Early serial init of port 2 failed\n");
+	if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
+				   PCI_DEVICE_ID_VIA_82C586_1,
+				   NULL)) == NULL) {
+		printk("No VIA ISA bridge found\n");
+		mcpn765_halt();
+		/* NOTREACHED */
+	}
 
-	/* Assume early_serial_setup() doesn't modify serial_req */
-	serial_req.line = 3;
-	serial_req.irq = 17;
-	serial_req.membase = (u_char *)MCPN765_SERIAL_4;
+	/*
+	 * PPCBug doesn't set the enable bits for the IDE device.
+	 * Turn them on now.
+	 */
+	pci_read_config_byte(dev, 0x40, &c);
+	c |= 0x03;
+	pci_write_config_byte(dev, 0x40, c);
 
-	gen550_init(3, &serial_req);
+	return;
+}
 
-	if (early_serial_setup(&serial_req) != 0)
-		printk(KERN_ERR "Early serial init of port 3 failed\n");
+void __init
+mcpn765_pcibios_fixup(void)
+{
+	/* Do MCPN765 board specific initialization.  */
+	mcpn765_setup_via_82c586b();
 }
-#endif
 
+void __init
+mcpn765_find_bridges(void)
+{
+	struct pci_controller	*hose;
+
+	hose = pcibios_alloc_controller();
+
+	if (!hose)
+		return;
+
+	hose->first_busno = 0;
+	hose->last_busno = 0xff;
+	hose->pci_mem_offset = MCPN765_PCI_PHY_MEM_OFFSET;
+
+	pci_init_resource(&hose->io_resource,
+			MCPN765_PCI_IO_START,
+			MCPN765_PCI_IO_END,
+			IORESOURCE_IO,
+			"PCI host bridge");
+
+	pci_init_resource(&hose->mem_resources[0],
+			MCPN765_PCI_MEM_START,
+			MCPN765_PCI_MEM_END,
+			IORESOURCE_MEM,
+			"PCI host bridge");
+
+	hose->io_space.start = MCPN765_PCI_IO_START;
+	hose->io_space.end = MCPN765_PCI_IO_END;
+	hose->mem_space.start = MCPN765_PCI_MEM_START;
+	hose->mem_space.end = MCPN765_PCI_MEM_END - HAWK_MPIC_SIZE;
+
+	if (hawk_init(hose,
+		       MCPN765_HAWK_PPC_REG_BASE,
+		       MCPN765_PROC_PCI_MEM_START,
+		       MCPN765_PROC_PCI_MEM_END - HAWK_MPIC_SIZE,
+		       MCPN765_PROC_PCI_IO_START,
+		       MCPN765_PROC_PCI_IO_END,
+		       MCPN765_PCI_MEM_END - HAWK_MPIC_SIZE + 1) != 0) {
+		printk("Could not initialize HAWK bridge\n");
+	}
+
+	/* VIA IDE BAR decoders are only 16-bits wide. PCI Auto Config
+	 * will reassign the bars outside of 16-bit I/O space, which will 
+	 * "break" things. To prevent this, we'll set the IDE chip into
+	 * legacy mode and seed the bars with their legacy addresses (in 16-bit
+	 * I/O space). The Auto Config code will skip the IDE contoller in 
+	 * legacy mode, so our bar values will stick.
+	 */
+	mcpn765_set_VIA_IDE_legacy();
+
+	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
+
+	/* Now that we've got 16-bit addresses in the bars, we can switch the
+	 * IDE controller back into native mode so we can do "modern" resource
+	 * and interrupt management.
+	 */
+	mcpn765_set_VIA_IDE_native();
+
+	ppc_md.pcibios_fixup = mcpn765_pcibios_fixup;
+	ppc_md.pcibios_fixup_bus = NULL;
+	ppc_md.pci_swizzle = common_swizzle;
+	ppc_md.pci_map_irq = mcpn765_map_irq;
+
+	return;
+}
 static void __init
 mcpn765_setup_arch(void)
 {
@@ -190,39 +358,9 @@ mcpn765_setup_arch(void)
 	return;
 }
 
-/*
- * Initialize the VIA 82c586b.
- */
-static void __init
-mcpn765_setup_via_82c586b(void)
-{
-	struct pci_dev	*dev;
-	u_char		c;
-
-	if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
-				   PCI_DEVICE_ID_VIA_82C586_1,
-				   NULL)) == NULL) {
-		printk("No VIA ISA bridge found\n");
-		mcpn765_halt();
-		/* NOTREACHED */
-	}
-
-	/*
-	 * PPCBug doesn't set the enable bits for the IDE device.
-	 * Turn them on now.
-	 */
-	pci_read_config_byte(dev, 0x40, &c);
-	c |= 0x03;
-	pci_write_config_byte(dev, 0x40, c);
-
-	return;
-}
-
 static void __init
 mcpn765_init2(void)
 {
-	/* Do MCPN765 board specific initialization.  */
-	mcpn765_setup_via_82c586b();
 
 	request_region(0x00,0x20,"dma1");
 	request_region(0x20,0x20,"pic1");
@@ -271,7 +409,7 @@ mcpn765_irq_canonicalize(u32 irq)
 static unsigned long __init
 mcpn765_find_end_of_memory(void)
 {
-	return pplus_get_mem_size(MCPN765_HAWK_SMC_BASE);
+	return hawk_get_mem_size(MCPN765_HAWK_SMC_BASE);
 }
 
 static void __init
@@ -285,6 +423,9 @@ mcpn765_reset_board(void)
 {
 	local_irq_disable();
 
+	/* set VIA IDE controller into native mode */
+	mcpn765_set_VIA_IDE_native();
+
 	/* Set exception prefix high - to the firmware */
 	_nmask_and_or_msr(0, MSR_IP);
 
@@ -328,92 +469,6 @@ mcpn765_show_cpuinfo(struct seq_file *m)
 	return 0;
 }
 
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-/*
- * IDE support.
- */
-static int		mcpn765_ide_ports_known = 0;
-static unsigned long	mcpn765_ide_regbase[MAX_HWIFS];
-static unsigned long	mcpn765_ide_ctl_regbase[MAX_HWIFS];
-static unsigned long	mcpn765_idedma_regbase;
-
-static void
-mcpn765_ide_probe(void)
-{
-	struct pci_dev *pdev = pci_find_device(PCI_VENDOR_ID_VIA,
-					       PCI_DEVICE_ID_VIA_82C586_1,
-					       NULL);
-
-        if(pdev) {
-                mcpn765_ide_regbase[0]=pdev->resource[0].start;
-                mcpn765_ide_regbase[1]=pdev->resource[2].start;
-                mcpn765_ide_ctl_regbase[0]=pdev->resource[1].start;
-                mcpn765_ide_ctl_regbase[1]=pdev->resource[3].start;
-                mcpn765_idedma_regbase=pdev->resource[4].start;
-        }
-
-        mcpn765_ide_ports_known = 1;
-	return;
-}
-
-static int
-mcpn765_ide_default_irq(unsigned long base)
-{
-        if (mcpn765_ide_ports_known == 0)
-	        mcpn765_ide_probe();
-
-	if (base == mcpn765_ide_regbase[0])
-		return 14;
-	else if (base == mcpn765_ide_regbase[1])
-		return 14;
-	else
-		return 0;
-}
-
-static unsigned long
-mcpn765_ide_default_io_base(int index)
-{
-        if (mcpn765_ide_ports_known == 0)
-	        mcpn765_ide_probe();
-
-	return mcpn765_ide_regbase[index];
-}
-
-static void __init
-mcpn765_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
-			      unsigned long ctrl_port, int *irq)
-{
-	unsigned long reg = data_port;
-	uint	alt_status_base;
-	int	i;
-
-	for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
-		hw->io_ports[i] = reg++;
-	}
-
-	if (data_port == mcpn765_ide_regbase[0]) {
-		alt_status_base = mcpn765_ide_ctl_regbase[0] + 2;
-		hw->irq = 14;
-	} else if (data_port == mcpn765_ide_regbase[1]) {
-		alt_status_base = mcpn765_ide_ctl_regbase[1] + 2;
-		hw->irq = 14;
-	} else {
-		alt_status_base = 0;
-		hw->irq = 0;
-	}
-
-	if (ctrl_port)
-		hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
-	else
-		hw->io_ports[IDE_CONTROL_OFFSET] = alt_status_base;
-
-	if (irq != NULL)
-		*irq = hw->irq;
-
-	return;
-}
-#endif
-
 /*
  * Set BAT 3 to map 0xf0000000 to end of physical memory space.
  */
@@ -467,21 +522,11 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 	ppc_md.heartbeat_reset = 0;
 	ppc_md.heartbeat_count = 0;
 
-#if defined(CONFIG_SERIAL_8250) && \
-	(defined(CONFIG_KGDB) || defined(CONFIG_SERIAL_TEXT_DEBUG))
-	mcpn765_early_serial_map();
-#ifdef CONFIG_KGDB
-	ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
-#endif
 #ifdef CONFIG_SERIAL_TEXT_DEBUG
 	ppc_md.progress = gen550_progress;
 #endif
-#endif
-
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-        ppc_ide_md.default_irq = mcpn765_ide_default_irq;
-        ppc_ide_md.default_io_base = mcpn765_ide_default_io_base;
-        ppc_ide_md.ide_init_hwif = mcpn765_ide_init_hwif_ports;
+#ifdef CONFIG_KGDB
+	ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
 #endif
 
 	return;

arch/ppc/platforms/mcpn765_pci.c

-/*
- * arch/ppc/platforms/mcpn765_pci.c
- *
- * PCI setup routines for the Motorola MCG MCPN765 cPCI board.
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/pplus.h>
-
-#include "mcpn765.h"
-
-
-/*
- * Motorola MCG MCPN765 interrupt routing.
- */
-static inline int
-mcpn765_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	   A   B   C   D
-	 */
-	{
-		{ 14,  0,  0,  0 },	/* IDSEL 11 - have to manually set */
-		{  0,  0,  0,  0 },	/* IDSEL 12 - unused */
-		{  0,  0,  0,  0 },	/* IDSEL 13 - unused */
-		{ 18,  0,  0,  0 },	/* IDSEL 14 - Enet 0 */
-		{  0,  0,  0,  0 },	/* IDSEL 15 - unused */
-		{ 25, 26, 27, 28 },	/* IDSEL 16 - PMC Slot 1 */
-		{ 28, 25, 26, 27 },	/* IDSEL 17 - PMC Slot 2 */
-		{  0,  0,  0,  0 },	/* IDSEL 18 - PMC 2B Connector XXXX */
-		{ 29,  0,  0,  0 },	/* IDSEL 19 - Enet 1 */
-		{ 20,  0,  0,  0 },	/* IDSEL 20 - 21554 cPCI bridge */
-	};
-
-	const long min_idsel = 11, max_idsel = 20, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-void __init
-mcpn765_find_bridges(void)
-{
-	struct pci_controller	*hose;
-
-	hose = pcibios_alloc_controller();
-
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-	hose->pci_mem_offset = MCPN765_PCI_PHY_MEM_OFFSET;
-
-	pci_init_resource(&hose->io_resource,
-			MCPN765_PCI_IO_START,
-			MCPN765_PCI_IO_END,
-			IORESOURCE_IO,
-			"PCI host bridge");
-
-	pci_init_resource(&hose->mem_resources[0],
-			MCPN765_PCI_MEM_START,
-			MCPN765_PCI_MEM_END,
-			IORESOURCE_MEM,
-			"PCI host bridge");
-
-	hose->io_space.start = MCPN765_PCI_IO_START;
-	hose->io_space.end = MCPN765_PCI_IO_END;
-	hose->mem_space.start = MCPN765_PCI_MEM_START;
-	hose->mem_space.end = MCPN765_PCI_MEM_END - PPLUS_MPIC_SIZE;
-
-	if (pplus_init(hose,
-		       MCPN765_HAWK_PPC_REG_BASE,
-		       MCPN765_PROC_PCI_MEM_START,
-		       MCPN765_PROC_PCI_MEM_END - PPLUS_MPIC_SIZE,
-		       MCPN765_PROC_PCI_IO_START,
-		       MCPN765_PROC_PCI_IO_END,
-		       MCPN765_PCI_MEM_END - PPLUS_MPIC_SIZE + 1) != 0) {
-		printk("Could not initialize HAWK bridge\n");
-	}
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pcibios_fixup = NULL;
-	ppc_md.pcibios_fixup_bus = NULL;
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = mcpn765_map_irq;
-
-	return;
-}

arch/ppc/platforms/pcore_setup.c → arch/ppc/platforms/pcore.c

@@ -23,16 +23,10 @@
 #include <linux/major.h>
 #include <linux/initrd.h>
 #include <linux/console.h>
-#include <linux/delay.h>
 #include <linux/irq.h>
 #include <linux/seq_file.h>
-#include <linux/ide.h>
 #include <linux/root_dev.h>
 
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
 #include <asm/io.h>
 #include <asm/machdep.h>
 #include <asm/time.h>
@@ -40,14 +34,122 @@
 #include <asm/mpc10x.h>
 #include <asm/todc.h>
 #include <asm/bootinfo.h>
+#include <asm/kgdb.h>
 
 #include "pcore.h"
 
-extern int pcore_find_bridges(void);
 extern unsigned long loops_per_jiffy;
 
 static int board_type;
 
+static inline int __init
+pcore_6750_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+	static char pci_irq_table[][4] =
+	/*
+	 *      PCI IDSEL/INTPIN->INTLINE
+	 *      A       B       C       D
+	 */
+	{
+		{9,	10,	11,	12},	/* IDSEL 24 - DEC 21554 */
+		{10,	0,	0,	0},	/* IDSEL 25 - DEC 21143 */
+		{11,	12,	9,	10},	/* IDSEL 26 - PMC I */
+		{12,	9,	10,	11},	/* IDSEL 27 - PMC II */
+		{0,	0,	0,	0},	/* IDSEL 28 - unused */
+		{0,	0,	9,	0},	/* IDSEL 29 - unused */
+		{0,	0,	0,	0},	/* IDSEL 30 - Winbond */
+		};
+	const long min_idsel = 24, max_idsel = 30, irqs_per_slot = 4;
+	return PCI_IRQ_TABLE_LOOKUP;
+};
+
+static inline int __init
+pcore_680_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+	static char pci_irq_table[][4] =
+	/*
+	 *      PCI IDSEL/INTPIN->INTLINE
+	 *      A       B       C       D
+	 */
+	{
+		{9,	10,	11,	12},	/* IDSEL 24 - Sentinel */
+		{10,	0,	0,	0},	/* IDSEL 25 - i82559 #1 */
+		{11,	12,	9,	10},	/* IDSEL 26 - PMC I */
+		{12,	9,	10,	11},	/* IDSEL 27 - PMC II */
+		{9,	0,	0,	0},	/* IDSEL 28 - i82559 #2 */
+		{0,	0,	0,	0},	/* IDSEL 29 - unused */
+		{0,	0,	0,	0},	/* IDSEL 30 - Winbond */
+		};
+	const long min_idsel = 24, max_idsel = 30, irqs_per_slot = 4;
+	return PCI_IRQ_TABLE_LOOKUP;
+};
+
+void __init
+pcore_pcibios_fixup(void)
+{
+	struct pci_dev *dev;
+
+	if ((dev = pci_find_device(PCI_VENDOR_ID_WINBOND,
+				PCI_DEVICE_ID_WINBOND_83C553,
+				0)))
+	{
+		/* Reroute interrupts both IDE channels to 15 */
+		pci_write_config_byte(dev,
+				PCORE_WINBOND_IDE_INT,
+				0xff);
+
+		/* Route INTA-D to IRQ9-12, respectively */
+		pci_write_config_word(dev,
+				PCORE_WINBOND_PCI_INT,
+				0x9abc);
+
+		/*
+		 * Set up 8259 edge/level triggering
+		 */
+ 		outb(0x00, PCORE_WINBOND_PRI_EDG_LVL);
+		outb(0x1e, PCORE_WINBOND_SEC_EDG_LVL);
+	}
+}
+
+int __init
+pcore_find_bridges(void)
+{
+	struct pci_controller* hose;
+	int host_bridge, board_type;
+
+	hose = pcibios_alloc_controller();
+	if (!hose)
+		return 0;
+
+	mpc10x_bridge_init(hose,
+			MPC10X_MEM_MAP_B,
+			MPC10X_MEM_MAP_B,
+			MPC10X_MAPB_EUMB_BASE);
+
+	/* Determine board type */
+	early_read_config_dword(hose,
+			0,
+			PCI_DEVFN(0,0),
+			PCI_VENDOR_ID,
+			&host_bridge);
+	if (host_bridge == MPC10X_BRIDGE_106)
+		board_type = PCORE_TYPE_6750;
+	else /* MPC10X_BRIDGE_107 */
+		board_type = PCORE_TYPE_680;
+
+	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
+
+	ppc_md.pcibios_fixup = pcore_pcibios_fixup;
+	ppc_md.pci_swizzle = common_swizzle;
+
+	if (board_type == PCORE_TYPE_6750)
+		ppc_md.pci_map_irq = pcore_6750_map_irq;
+	else /* PCORE_TYPE_680 */
+		ppc_md.pci_map_irq = pcore_680_map_irq;
+
+	return board_type;
+}
+
 /* Dummy variable to satisfy mpc10x_common.o */
 void *OpenPIC_Addr;
 
@@ -130,7 +232,14 @@ pcore_setup_arch(void)
 	conswitchp = &dummy_con;
 #endif
 
-		 printk("Force PCore port (C) 2001 MontaVista Software, Inc. (source@mvista.com)\n");
+ 	printk(KERN_INFO "Force PowerCore ");
+	if (board_type == PCORE_TYPE_6750)
+		printk("6750\n");
+	else
+		printk("680\n");
+	printk(KERN_INFO "Port by MontaVista Software, Inc. (source@mvista.com)\n");
+	_set_L2CR(L2CR_L2E | _get_L2CR());
+
 }
 
 static void
@@ -175,25 +284,16 @@ pcore_init_IRQ(void)
 static __inline__ void
 pcore_set_bat(void)
 {
-	unsigned long   bat3u, bat3l;
-
-	__asm__ __volatile__(
-			" lis %0,0xf000\n \
-			ori %1,%0,0x002a\n \
-			ori %0,%0,0x1ffe\n \
-			mtspr 0x21e,%0\n \
-			mtspr 0x21f,%1\n \
-			isync\n \
-			sync "
-			: "=r" (bat3u), "=r" (bat3l));
+	mb();
+	mtspr(DBAT3U, 0xf0001ffe);
+	mtspr(DBAT3L, 0xfe80002a);
+	mb();
+
 }
 
 static unsigned long __init
 pcore_find_end_of_memory(void)
 {
-	/* Cover I/O space with a BAT */
-	/* yuck, better hope your ram size is a power of 2  -- paulus */
-	pcore_set_bat();
 
 	return mpc10x_get_mem_size(MPC10X_MEM_MAP_B);
 }
@@ -212,6 +312,10 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 {
 	parse_bootinfo(find_bootinfo());
 
+	/* Cover I/O space with a BAT */
+	/* yuck, better hope your ram size is a power of 2  -- paulus */
+	pcore_set_bat();
+
 	isa_io_base = MPC10X_MAPB_ISA_IO_BASE;
 	isa_mem_base = MPC10X_MAPB_ISA_MEM_BASE;
 	pci_dram_offset = MPC10X_MAPB_DRAM_OFFSET;
@@ -241,4 +345,11 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 
 	ppc_md.nvram_read_val	= todc_m48txx_read_val;
 	ppc_md.nvram_write_val	= todc_m48txx_write_val;
+
+#ifdef CONFIG_SERIAL_TEXT_DEBUG
+	ppc_md.progress = gen550_progress;
+#endif
+#ifdef CONFIG_KGDB
+	ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
+#endif
 }

arch/ppc/platforms/pcore_pci.c

-/*
- * arch/ppc/platforms/pcore_pci.c
- *
- * PCI support for Force PCORE boards
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpc10x.h>
-
-#include "pcore.h"
-
-#undef DEBUG
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif /* DEBUG */
-
-static inline int __init
-pcore_6750_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *      PCI IDSEL/INTPIN->INTLINE
-	 *      A       B       C       D
-	 */
-	{
-		{9,	10,	11,	12},	/* IDSEL 24 - DEC 21554 */
-		{10,	0,	0,	0},	/* IDSEL 25 - DEC 21143 */
-		{11,	12,	9,	10},	/* IDSEL 26 - PMC I */
-		{12,	9,	10,	11},	/* IDSEL 27 - PMC II */
-		{0,	0,	0,	0},	/* IDSEL 28 - unused */
-		{0,	0,	9,	0},	/* IDSEL 29 - unused */
-		{0,	0,	0,	0},	/* IDSEL 30 - Winbond */
-		};
-	const long min_idsel = 24, max_idsel = 30, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-};
-
-static inline int __init
-pcore_680_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *      PCI IDSEL/INTPIN->INTLINE
-	 *      A       B       C       D
-	 */
-	{
-		{9,	10,	11,	12},	/* IDSEL 24 - Sentinel */
-		{10,	0,	0,	0},	/* IDSEL 25 - i82559 #1 */
-		{11,	12,	9,	10},	/* IDSEL 26 - PMC I */
-		{12,	9,	10,	11},	/* IDSEL 27 - PMC II */
-		{9,	0,	0,	0},	/* IDSEL 28 - i82559 #2 */
-		{0,	0,	0,	0},	/* IDSEL 29 - unused */
-		{0,	0,	0,	0},	/* IDSEL 30 - Winbond */
-		};
-	const long min_idsel = 24, max_idsel = 30, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-};
-
-void __init
-pcore_pcibios_fixup(void)
-{
-	struct pci_dev *dev;
-
-	if ((dev = pci_find_device(PCI_VENDOR_ID_WINBOND,
-				PCI_DEVICE_ID_WINBOND_83C553,
-				0)))
-	{
-		/* Reroute interrupts both IDE channels to 15 */
-		pci_write_config_byte(dev,
-				PCORE_WINBOND_IDE_INT,
-				0xff);
-
-		/* Route INTA-D to IRQ9-12, respectively */
-		pci_write_config_word(dev,
-				PCORE_WINBOND_PCI_INT,
-				0x9abc);
-
-		/*
-		 * Set up 8259 edge/level triggering
-		 */
- 		outb(0x00, PCORE_WINBOND_PRI_EDG_LVL);
-		outb(0x1e, PCORE_WINBOND_SEC_EDG_LVL);
-	}
-}
-
-int __init
-pcore_find_bridges(void)
-{
-	struct pci_controller* hose;
-	int host_bridge, board_type;
-
-	hose = pcibios_alloc_controller();
-	if (!hose)
-		return 0;
-
-	mpc10x_bridge_init(hose,
-			MPC10X_MEM_MAP_B,
-			MPC10X_MEM_MAP_B,
-			MPC10X_MAPB_EUMB_BASE);
-
-	/* Determine board type */
-	early_read_config_dword(hose,
-			0,
-			PCI_DEVFN(0,0),
-			PCI_VENDOR_ID,
-			&host_bridge);
-	if (host_bridge == MPC10X_BRIDGE_106)
-		board_type = PCORE_TYPE_6750;
-	else /* MPC10X_BRIDGE_107 */
-		board_type = PCORE_TYPE_680;
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pcibios_fixup = pcore_pcibios_fixup;
-	ppc_md.pci_swizzle = common_swizzle;
-
-	if (board_type == PCORE_TYPE_6750)
-		ppc_md.pci_map_irq = pcore_6750_map_irq;
-	else /* PCORE_TYPE_680 */
-		ppc_md.pci_map_irq = pcore_680_map_irq;
-
-	return board_type;
-}

arch/ppc/platforms/pplus.c

@@ -513,7 +513,7 @@ void __init pplus_find_bridges(void)
 	hose->mem_space.start = PPLUS_PCI_MEM_START;
 	hose->mem_space.end = PPLUS_PCI_MEM_END - HAWK_MPIC_SIZE;
 
-	if (pplus_init(hose, PPLUS_HAWK_PPC_REG_BASE, PPLUS_PROC_PCI_MEM_START,
+	if (hawk_init(hose, PPLUS_HAWK_PPC_REG_BASE, PPLUS_PROC_PCI_MEM_START,
 				PPLUS_PROC_PCI_MEM_END - HAWK_MPIC_SIZE,
 				PPLUS_PROC_PCI_IO_START, PPLUS_PROC_PCI_IO_END,
 				PPLUS_PROC_PCI_MEM_END - HAWK_MPIC_SIZE + 1)
@@ -816,7 +816,7 @@ static unsigned long __init pplus_find_end_of_memory(void)
 	dump_dbats();
 #endif
 
-	total = pplus_get_mem_size(PPLUS_HAWK_SMC_BASE);
+	total = hawk_get_mem_size(PPLUS_HAWK_SMC_BASE);
 	return (total);
 }
 

arch/ppc/platforms/pplus.h

@@ -64,14 +64,4 @@
 
 #define PPLUS_VGA_MEM_BASE		0xf0000000U
 
-extern int pplus_init(struct pci_controller *hose,
-	       unsigned int ppc_reg_base, unsigned long processor_pci_mem_start,
-	       unsigned long processor_pci_mem_end,
-	       unsigned long processor_pci_io_start,
-	       unsigned long processor_pci_io_end,
-	       unsigned long processor_mpic_base);
-
-extern unsigned long pplus_get_mem_size(unsigned int smc_base);
-extern int pplus_mpic_init(unsigned int pci_mem_offset);
-
-#endif				/* __PPC_PPLUS_H */
+#endif	/* __PPC_PPLUS_H */

arch/ppc/platforms/prep_pci.c

@@ -311,11 +311,11 @@ static char Genesis2_pci_IRQ_map[23] __prepdata =
 	0,	/* Slot 7  - unused */
 	0,	/* Slot 8  - unused */
 	0,	/* Slot 9  - unused */
-	0,	/* Slot 10 - Ethernet */
-	0,	/* Slot 11 - Universe PCI - VME Bridge */
-	3,	/* Slot 12 - unused */
-	0,	/* Slot 13 - unused */
-	2,	/* Slot 14 - SCSI */
+	0,	/* Slot 10 - unused */
+	0,	/* Slot 11 - IDE */
+	3,	/* Slot 12 - SCSI */
+	5,	/* Slot 13 - Universe PCI - VME Bridge */
+	2,	/* Slot 14 - Ethernet */
 	0,	/* Slot 15 - unused */
 	9,	/* Slot 16 - PMC 1 */
 	12,	/* Slot 17 - pci */

arch/ppc/platforms/prep_setup.c

@@ -323,7 +323,7 @@ prep_carolina_cpuinfo(struct seq_file *m)
 		/* L2 size */
 		if ((l2_reg & 0x60) == 0)
 			seq_printf(m, "256KiB");
-		else if ((l2_reg & 0x60) == 1)
+		else if ((l2_reg & 0x60) == 0x20)
 			seq_printf(m, "512KiB");
 		else
 			seq_printf(m, "unknown size");
@@ -725,6 +725,7 @@ prep_setup_arch(void)
 			case PREP_IBM_CAROLINA_IDE_0:
 			case PREP_IBM_CAROLINA_IDE_1:
 			case PREP_IBM_CAROLINA_IDE_2:
+			case PREP_IBM_CAROLINA_IDE_3:
 				is_ide = 1;
 			case PREP_IBM_CAROLINA_SCSI_0:
 			case PREP_IBM_CAROLINA_SCSI_1:

arch/ppc/syslib/Makefile

@@ -42,28 +42,24 @@ obj-$(CONFIG_EV64260)		+= gt64260_common.o gt64260_pic.o \
 obj-$(CONFIG_GEMINI)		+= open_pic.o i8259.o indirect_pci.o
 obj-$(CONFIG_K2)		+= i8259.o indirect_pci.o todc_time.o \
 					pci_auto.o
-obj-$(CONFIG_LOPEC)		+= mpc10x_common.o indirect_pci.o pci_auto.o \
-					open_pic.o i8259.o todc_time.o
+obj-$(CONFIG_LOPEC)		+= pci_auto.o open_pic.o i8259.o todc_time.o
 obj-$(CONFIG_MCPN765)		+= todc_time.o indirect_pci.o pci_auto.o \
-					open_pic.o i8259.o pplus_common.o
+					open_pic.o i8259.o hawk_common.o
 obj-$(CONFIG_MENF1)		+= todc_time.o i8259.o mpc10x_common.o \
 					pci_auto.o indirect_pci.o
 obj-$(CONFIG_MVME5100)		+= open_pic.o todc_time.o indirect_pci.o \
-					i8259.o pci_auto.o pplus_common.o
+					i8259.o pci_auto.o hawk_common.o
 obj-$(CONFIG_OCOTEA)		+= indirect_pci.o pci_auto.o todc_time.o
 obj-$(CONFIG_PAL4)		+= cpc700_pic.o
-obj-$(CONFIG_PCORE)		+= mpc10x_common.o todc_time.o i8259.o \
-					indirect_pci.o pci_auto.o
-obj-$(CONFIG_POWERPMC250)	+= open_pic.o mpc10x_common.o \
-					indirect_pci.o pci_auto.o
-obj-$(CONFIG_PPLUS)		+= pplus_common.o open_pic.o i8259.o \
+obj-$(CONFIG_PCORE)		+= todc_time.o i8259.o pci_auto.o
+obj-$(CONFIG_POWERPMC250)	+= open_pic.o pci_auto.o
+obj-$(CONFIG_PPLUS)		+= hawk_common.o open_pic.o i8259.o \
 				   indirect_pci.o todc_time.o pci_auto.o
 obj-$(CONFIG_PRPMC750)		+= open_pic.o indirect_pci.o pci_auto.o \
-					pplus_common.o
+					hawk_common.o
 obj-$(CONFIG_PRPMC800)		+= open_pic.o indirect_pci.o pci_auto.o \
-					pplus_common.o harrier.o
-obj-$(CONFIG_SANDPOINT)		+= i8259.o open_pic.o mpc10x_common.o \
-					pci_auto.o indirect_pci.o todc_time.o
+					hawk_common.o harrier.o
+obj-$(CONFIG_SANDPOINT)		+= i8259.o open_pic.o pci_auto.o todc_time.o
 obj-$(CONFIG_SPRUCE)		+= cpc700_pic.o indirect_pci.o pci_auto.o \
 				   todc_time.o
 obj-$(CONFIG_8260)		+= m8260_setup.o ppc8260_pic.o
@@ -72,3 +68,4 @@ obj-$(CONFIG_KGDB)		+= gen550_kgdb.o gen550_dbg.o
 obj-$(CONFIG_SERIAL_TEXT_DEBUG)	+= gen550_dbg.o
 endif
 obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
+obj-$(CONFIG_MPC10X_BRIDGE)     += mpc10x_common.o indirect_pci.o

arch/ppc/syslib/pplus_common.c → arch/ppc/syslib/hawk_common.c

 /*
- * arch/ppc/syslib/pplus_common.c
+ * arch/ppc/syslib/hawk_common.c
  *
  * Common Motorola PowerPlus Platform--really Falcon/Raven or HAWK.
  *
@@ -44,7 +44,7 @@
  * 'OpenPIC_Addr' will be set correctly by this routine.
  */
 int __init
-pplus_init(struct pci_controller *hose,
+hawk_init(struct pci_controller *hose,
 	     uint ppc_reg_base,
 	     ulong processor_pci_mem_start,
 	     ulong processor_pci_mem_end,
@@ -59,14 +59,14 @@ pplus_init(struct pci_controller *hose,
 	 */
 	if (((processor_pci_mem_start&0xffff0000) != processor_pci_mem_start) ||
 	    ((processor_pci_io_start &0xffff0000) != processor_pci_io_start)) {
-		printk("pplus_init: %s\n",
+		printk("hawk_init: %s\n",
 			"PPC to PCI mappings must start on 64 KB boundaries");
 		return -1;
 	}
 
 	if (((processor_pci_mem_end  &0x0000ffff) != 0x0000ffff) ||
 	    ((processor_pci_io_end   &0x0000ffff) != 0x0000ffff)) {
-		printk("pplus_init: PPC to PCI mappings %s\n",
+		printk("hawk_init: PPC to PCI mappings %s\n",
 			"must end just before a 64 KB boundaries");
 		return -1;
 	}
@@ -75,19 +75,19 @@ pplus_init(struct pci_controller *hose,
 	     (hose->mem_space.end - hose->mem_space.start)) ||
 	    ((processor_pci_io_end - processor_pci_io_start) !=
 	     (hose->io_space.end - hose->io_space.start))) {
-		printk("pplus_init: %s\n",
+		printk("hawk_init: %s\n",
 			"PPC and PCI memory or I/O space sizes don't match");
 		return -1;
 	}
 
 	if ((processor_mpic_base & 0xfffc0000) != processor_mpic_base) {
-		printk("pplus_init: %s\n",
+		printk("hawk_init: %s\n",
 			"MPIC address must start on 256 MB boundary");
 		return -1;
 	}
 
 	if ((pci_dram_offset & 0xffff0000) != pci_dram_offset) {
-		printk("pplus_init: %s\n",
+		printk("hawk_init: %s\n",
 			"pci_dram_offset must be multiple of 64 KB");
 		return -1;
 	}
@@ -226,7 +226,7 @@ static uint hawk_size_table[] __initdata = {
  * into virtual memory--too early to use ioremap().
  */
 unsigned long __init
-pplus_get_mem_size(uint smc_base)
+hawk_get_mem_size(uint smc_base)
 {
 	unsigned long	total;
 	int		i, size_table_entries, reg_limit;
@@ -238,7 +238,7 @@ pplus_get_mem_size(uint smc_base)
 	vend_dev_id = in_be32((uint *)smc_base + PCI_VENDOR_ID);
 
 	if (((vend_dev_id & 0xffff0000) >> 16) != PCI_VENDOR_ID_MOTOROLA) {
-		printk("pplus_get_mem_size: %s (0x%x)\n",
+		printk("hawk_get_mem_size: %s (0x%x)\n",
 			"Not a Motorola Memory Controller", vend_dev_id);
 		return 0;
 	}
@@ -259,7 +259,7 @@ pplus_get_mem_size(uint smc_base)
 		reg_limit = HAWK_SMC_REG_COUNT;
 	}
 	else {
-		printk("pplus_get_mem_size: %s (0x%x)\n",
+		printk("hawk_get_mem_size: %s (0x%x)\n",
 			"Not a Falcon or HAWK", vend_dev_id);
 		return 0;
 	}
@@ -285,35 +285,3 @@ pplus_get_mem_size(uint smc_base)
 
 	return total;
 }
-
-int __init
-pplus_mpic_init(unsigned int pci_mem_offset)
-{
-	unsigned short	devid;
-	unsigned int	pci_membase;
-
-	/* Check the first PCI device to see if it is a Raven or Hawk. */
-	early_read_config_word(0, 0, 0, PCI_DEVICE_ID, &devid);
-
-	switch (devid) {
-	case PCI_DEVICE_ID_MOTOROLA_RAVEN:
-	case PCI_DEVICE_ID_MOTOROLA_HAWK:
-		break;
-	default:
-		OpenPIC_Addr = NULL;
-		return 1;
-	}
-
-	/* Read the memory base register. */
-	early_read_config_dword(0, 0, 0, PCI_BASE_ADDRESS_1, &pci_membase);
-
-	if (pci_membase == 0) {
-		OpenPIC_Addr = NULL;
-		return 1;
-	}
-
-	/* Map the MPIC registers to virtual memory. */
-	OpenPIC_Addr = ioremap(pci_membase + pci_mem_offset, 0x22000);
-
-	return 0;
-}

include/asm-ppc/cputable.h

@@ -75,6 +75,7 @@ extern struct cpu_spec		*cur_cpu_spec[];
 #define CPU_FTR_DUAL_PLL_750FX		0x00004000
 #define CPU_FTR_NO_DPM			0x00008000
 #define CPU_FTR_HAS_HIGH_BATS		0x00010000
+#define CPU_FTR_NEED_COHERENT           0x00020000
 
 #ifdef __ASSEMBLY__
 

include/asm-ppc/hawk.h

@@ -29,4 +29,4 @@ extern int hawk_init(struct pci_controller *hose,
 extern unsigned long hawk_get_mem_size(unsigned int smc_base);
 extern int hawk_mpic_init(unsigned int pci_mem_offset);
 
-#endif				/* __ASMPPC_PPLUS_H */
+#endif	/* __ASMPPC_HAWK_H */

include/asm-ppc/highmem.h

@@ -87,7 +87,7 @@ static inline void *kmap_atomic(struct page *page, enum km_type type)
 
 	idx = type + KM_TYPE_NR*smp_processor_id();
 	vaddr = KMAP_FIX_BEGIN + idx * PAGE_SIZE;
-#if HIGHMEM_DEBUG
+#ifdef HIGHMEM_DEBUG
 	BUG_ON(!pte_none(*(kmap_pte+idx)));
 #endif
 	set_pte(kmap_pte+idx, mk_pte(page, kmap_prot));
@@ -98,7 +98,7 @@ static inline void *kmap_atomic(struct page *page, enum km_type type)
 
 static inline void kunmap_atomic(void *kvaddr, enum km_type type)
 {
-#if HIGHMEM_DEBUG
+#ifdef HIGHMEM_DEBUG
 	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
 	unsigned int idx = type + KM_TYPE_NR*smp_processor_id();
 

include/asm-ppc/rwsem.h

@@ -27,7 +27,7 @@ struct rw_semaphore {
 #define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
 	spinlock_t		wait_lock;
 	struct list_head	wait_list;
-#if RWSEM_DEBUG
+#ifdef RWSEM_DEBUG
 	int			debug;
 #endif
 };
@@ -35,7 +35,7 @@ struct rw_semaphore {
 /*
  * initialisation
  */
-#if RWSEM_DEBUG
+#ifdef RWSEM_DEBUG
 #define __RWSEM_DEBUG_INIT      , 0
 #else
 #define __RWSEM_DEBUG_INIT	/* */
@@ -59,7 +59,7 @@ static inline void init_rwsem(struct rw_semaphore *sem)
 	sem->count = RWSEM_UNLOCKED_VALUE;
 	spin_lock_init(&sem->wait_lock);
 	INIT_LIST_HEAD(&sem->wait_list);
-#if RWSEM_DEBUG
+#ifdef RWSEM_DEBUG
 	sem->debug = 0;
 #endif
 }