[PATCH] atmel_serial: Use __raw I/O register access

Access to chip-internal registers should always be native-endian.  This is
especially important for AVR32 since it's a big-endian architecture and the
non-raw readl() and writel() macros are defined to do little-endian
accesses.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/serial/atmel_serial.c

@@ -73,35 +73,35 @@
 
 #define ATMEL_ISR_PASS_LIMIT	256
 
-#define UART_PUT_CR(port,v)	writel(v, (port)->membase + ATMEL_US_CR)
-#define UART_GET_MR(port)	readl((port)->membase + ATMEL_US_MR)
-#define UART_PUT_MR(port,v)	writel(v, (port)->membase + ATMEL_US_MR)
-#define UART_PUT_IER(port,v)	writel(v, (port)->membase + ATMEL_US_IER)
-#define UART_PUT_IDR(port,v)	writel(v, (port)->membase + ATMEL_US_IDR)
-#define UART_GET_IMR(port)	readl((port)->membase + ATMEL_US_IMR)
-#define UART_GET_CSR(port)	readl((port)->membase + ATMEL_US_CSR)
-#define UART_GET_CHAR(port)	readl((port)->membase + ATMEL_US_RHR)
-#define UART_PUT_CHAR(port,v)	writel(v, (port)->membase + ATMEL_US_THR)
-#define UART_GET_BRGR(port)	readl((port)->membase + ATMEL_US_BRGR)
-#define UART_PUT_BRGR(port,v)	writel(v, (port)->membase + ATMEL_US_BRGR)
-#define UART_PUT_RTOR(port,v)	writel(v, (port)->membase + ATMEL_US_RTOR)
-
-// #define UART_GET_CR(port)	readl((port)->membase + ATMEL_US_CR)		// is write-only
+#define UART_PUT_CR(port,v)	__raw_writel(v, (port)->membase + ATMEL_US_CR)
+#define UART_GET_MR(port)	__raw_readl((port)->membase + ATMEL_US_MR)
+#define UART_PUT_MR(port,v)	__raw_writel(v, (port)->membase + ATMEL_US_MR)
+#define UART_PUT_IER(port,v)	__raw_writel(v, (port)->membase + ATMEL_US_IER)
+#define UART_PUT_IDR(port,v)	__raw_writel(v, (port)->membase + ATMEL_US_IDR)
+#define UART_GET_IMR(port)	__raw_readl((port)->membase + ATMEL_US_IMR)
+#define UART_GET_CSR(port)	__raw_readl((port)->membase + ATMEL_US_CSR)
+#define UART_GET_CHAR(port)	__raw_readl((port)->membase + ATMEL_US_RHR)
+#define UART_PUT_CHAR(port,v)	__raw_writel(v, (port)->membase + ATMEL_US_THR)
+#define UART_GET_BRGR(port)	__raw_readl((port)->membase + ATMEL_US_BRGR)
+#define UART_PUT_BRGR(port,v)	__raw_writel(v, (port)->membase + ATMEL_US_BRGR)
+#define UART_PUT_RTOR(port,v)	__raw_writel(v, (port)->membase + ATMEL_US_RTOR)
+
+// #define UART_GET_CR(port)	__raw_readl((port)->membase + ATMEL_US_CR)		// is write-only
 
  /* PDC registers */
-#define UART_PUT_PTCR(port,v)	writel(v, (port)->membase + ATMEL_PDC_PTCR)
-#define UART_GET_PTSR(port)	readl((port)->membase + ATMEL_PDC_PTSR)
-
-#define UART_PUT_RPR(port,v)	writel(v, (port)->membase + ATMEL_PDC_RPR)
-#define UART_GET_RPR(port)	readl((port)->membase + ATMEL_PDC_RPR)
-#define UART_PUT_RCR(port,v)	writel(v, (port)->membase + ATMEL_PDC_RCR)
-#define UART_PUT_RNPR(port,v)	writel(v, (port)->membase + ATMEL_PDC_RNPR)
-#define UART_PUT_RNCR(port,v)	writel(v, (port)->membase + ATMEL_PDC_RNCR)
-
-#define UART_PUT_TPR(port,v)	writel(v, (port)->membase + ATMEL_PDC_TPR)
-#define UART_PUT_TCR(port,v)	writel(v, (port)->membase + ATMEL_PDC_TCR)
-//#define UART_PUT_TNPR(port,v)	writel(v, (port)->membase + ATMEL_PDC_TNPR)
-//#define UART_PUT_TNCR(port,v)	writel(v, (port)->membase + ATMEL_PDC_TNCR)
+#define UART_PUT_PTCR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
+#define UART_GET_PTSR(port)	__raw_readl((port)->membase + ATMEL_PDC_PTSR)
+
+#define UART_PUT_RPR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_RPR)
+#define UART_GET_RPR(port)	__raw_readl((port)->membase + ATMEL_PDC_RPR)
+#define UART_PUT_RCR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_RCR)
+#define UART_PUT_RNPR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_RNPR)
+#define UART_PUT_RNCR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_RNCR)
+
+#define UART_PUT_TPR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_TPR)
+#define UART_PUT_TCR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_TCR)
+//#define UART_PUT_TNPR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_TNPR)
+//#define UART_PUT_TNCR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_TNCR)
 
 static int (*atmel_open_hook)(struct uart_port *);
 static void (*atmel_close_hook)(struct uart_port *);