Commit 54ad726c authored by Ingo Molnar's avatar Ingo Molnar

x86/asm/entry/32: Improve code readability

Make the 64-bit compat 32-bit syscall entry code a bit more readable:

 - eliminate whitespace noise

 - use consistent vertical spacing

 - use consistent assembly coding style similar to entry_64.S

 - fix various comments

No code changed:

arch/x86/entry/ia32entry.o:

   text	   data	    bss	    dec	    hex	filename
   1391	      0	      0	   1391	    56f	ia32entry.o.before
   1391	      0	      0	   1391	    56f	ia32entry.o.after

md5:
   f28501dcc366e68b557313942c6496d6  ia32entry.o.before.asm
   f28501dcc366e68b557313942c6496d6  ia32entry.o.after.asm

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
parent 53e9accf
/*
* Compatibility mode system call entry point for x86-64.
*
* Compatibility mode system call entry point for x86-64.
*
* Copyright 2000-2002 Andi Kleen, SuSE Labs.
*/
*/
#include "calling.h"
#include <asm/asm-offsets.h>
#include <asm/current.h>
#include <asm/errno.h>
#include <asm/ia32_unistd.h>
#include <asm/thread_info.h>
#include <asm/ia32_unistd.h>
#include <asm/thread_info.h>
#include <asm/segment.h>
#include <asm/irqflags.h>
#include <asm/asm.h>
......@@ -20,11 +19,11 @@
/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */
#include <linux/elf-em.h>
#define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE)
#define __AUDIT_ARCH_LE 0x40000000
#define __AUDIT_ARCH_LE 0x40000000
#ifndef CONFIG_AUDITSYSCALL
#define sysexit_audit ia32_ret_from_sys_call
#define sysretl_audit ia32_ret_from_sys_call
# define sysexit_audit ia32_ret_from_sys_call
# define sysretl_audit ia32_ret_from_sys_call
#endif
.section .entry.text, "ax"
......@@ -37,7 +36,7 @@ ENDPROC(native_usergs_sysret32)
#endif
/*
* 32bit SYSENTER instruction entry.
* 32-bit SYSENTER instruction entry.
*
* SYSENTER loads ss, rsp, cs, and rip from previously programmed MSRs.
* IF and VM in rflags are cleared (IOW: interrupts are off).
......@@ -79,7 +78,7 @@ ENTRY(ia32_sysenter_target)
pushq %rbp /* pt_regs->sp */
pushfq /* pt_regs->flags */
pushq $__USER32_CS /* pt_regs->cs */
pushq %r10 /* pt_regs->ip = thread_info->sysenter_return */
pushq %r10 /* pt_regs->ip = thread_info->sysenter_return */
pushq %rax /* pt_regs->orig_ax */
pushq %rdi /* pt_regs->di */
pushq %rsi /* pt_regs->si */
......@@ -87,15 +86,15 @@ ENTRY(ia32_sysenter_target)
pushq %rcx /* pt_regs->cx */
pushq $-ENOSYS /* pt_regs->ax */
cld
sub $(10*8),%rsp /* pt_regs->r8-11,bp,bx,r12-15 not saved */
sub $(10*8), %rsp /* pt_regs->r8-11, bp, bx, r12-15 not saved */
/*
* no need to do an access_ok check here because rbp has been
* 32bit zero extended
* 32-bit zero extended
*/
ASM_STAC
1: movl (%rbp),%ebp
_ASM_EXTABLE(1b,ia32_badarg)
1: movl (%rbp), %ebp
_ASM_EXTABLE(1b, ia32_badarg)
ASM_CLAC
/*
......@@ -103,26 +102,26 @@ ENTRY(ia32_sysenter_target)
* ourselves. To save a few cycles, we can check whether
* NT was set instead of doing an unconditional popfq.
*/
testl $X86_EFLAGS_NT,EFLAGS(%rsp)
jnz sysenter_fix_flags
testl $X86_EFLAGS_NT, EFLAGS(%rsp)
jnz sysenter_fix_flags
sysenter_flags_fixed:
orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
jnz sysenter_tracesys
jnz sysenter_tracesys
sysenter_do_call:
/* 32bit syscall -> 64bit C ABI argument conversion */
movl %edi,%r8d /* arg5 */
movl %ebp,%r9d /* arg6 */
xchg %ecx,%esi /* rsi:arg2, rcx:arg4 */
movl %ebx,%edi /* arg1 */
movl %edx,%edx /* arg3 (zero extension) */
/* 32-bit syscall -> 64-bit C ABI argument conversion */
movl %edi, %r8d /* arg5 */
movl %ebp, %r9d /* arg6 */
xchg %ecx, %esi /* rsi:arg2, rcx:arg4 */
movl %ebx, %edi /* arg1 */
movl %edx, %edx /* arg3 (zero extension) */
sysenter_dispatch:
cmpq $(IA32_NR_syscalls-1),%rax
cmpq $(IA32_NR_syscalls-1), %rax
ja 1f
call *ia32_sys_call_table(,%rax,8)
movq %rax,RAX(%rsp)
call *ia32_sys_call_table(, %rax, 8)
movq %rax, RAX(%rsp)
1:
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
......@@ -139,21 +138,21 @@ sysexit_from_sys_call:
* This code path is still called 'sysexit' because it pairs
* with 'sysenter' and it uses the SYSENTER calling convention.
*/
andl $~TS_COMPAT,ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
movl RIP(%rsp),%ecx /* User %eip */
andl $~TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
movl RIP(%rsp), %ecx /* User %eip */
RESTORE_RSI_RDI
xorl %edx,%edx /* avoid info leaks */
xorq %r8,%r8
xorq %r9,%r9
xorq %r10,%r10
movl EFLAGS(%rsp),%r11d /* User eflags */
xorl %edx, %edx /* Do not leak kernel information */
xorq %r8, %r8
xorq %r9, %r9
xorq %r10, %r10
movl EFLAGS(%rsp), %r11d /* User eflags */
TRACE_IRQS_ON
/*
* SYSRETL works even on Intel CPUs. Use it in preference to SYSEXIT,
* since it avoids a dicey window with interrupts enabled.
*/
movl RSP(%rsp),%esp
movl RSP(%rsp), %esp
/*
* USERGS_SYSRET32 does:
......@@ -179,51 +178,51 @@ sysexit_from_sys_call:
#ifdef CONFIG_AUDITSYSCALL
.macro auditsys_entry_common
movl %esi,%r8d /* 5th arg: 4th syscall arg */
movl %ecx,%r9d /*swap with edx*/
movl %edx,%ecx /* 4th arg: 3rd syscall arg */
movl %r9d,%edx /* 3rd arg: 2nd syscall arg */
movl %ebx,%esi /* 2nd arg: 1st syscall arg */
movl %eax,%edi /* 1st arg: syscall number */
call __audit_syscall_entry
movl ORIG_RAX(%rsp),%eax /* reload syscall number */
movl %ebx,%edi /* reload 1st syscall arg */
movl RCX(%rsp),%esi /* reload 2nd syscall arg */
movl RDX(%rsp),%edx /* reload 3rd syscall arg */
movl RSI(%rsp),%ecx /* reload 4th syscall arg */
movl RDI(%rsp),%r8d /* reload 5th syscall arg */
movl %esi, %r8d /* 5th arg: 4th syscall arg */
movl %ecx, %r9d /* swap with edx */
movl %edx, %ecx /* 4th arg: 3rd syscall arg */
movl %r9d, %edx /* 3rd arg: 2nd syscall arg */
movl %ebx, %esi /* 2nd arg: 1st syscall arg */
movl %eax, %edi /* 1st arg: syscall number */
call __audit_syscall_entry
movl ORIG_RAX(%rsp), %eax /* reload syscall number */
movl %ebx, %edi /* reload 1st syscall arg */
movl RCX(%rsp), %esi /* reload 2nd syscall arg */
movl RDX(%rsp), %edx /* reload 3rd syscall arg */
movl RSI(%rsp), %ecx /* reload 4th syscall arg */
movl RDI(%rsp), %r8d /* reload 5th syscall arg */
.endm
.macro auditsys_exit exit
testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
jnz ia32_ret_from_sys_call
testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
jnz ia32_ret_from_sys_call
TRACE_IRQS_ON
ENABLE_INTERRUPTS(CLBR_NONE)
movl %eax,%esi /* second arg, syscall return value */
cmpl $-MAX_ERRNO,%eax /* is it an error ? */
jbe 1f
movslq %eax, %rsi /* if error sign extend to 64 bits */
1: setbe %al /* 1 if error, 0 if not */
movzbl %al,%edi /* zero-extend that into %edi */
call __audit_syscall_exit
movq RAX(%rsp),%rax /* reload syscall return value */
movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
movl %eax, %esi /* second arg, syscall return value */
cmpl $-MAX_ERRNO, %eax /* is it an error ? */
jbe 1f
movslq %eax, %rsi /* if error sign extend to 64 bits */
1: setbe %al /* 1 if error, 0 if not */
movzbl %al, %edi /* zero-extend that into %edi */
call __audit_syscall_exit
movq RAX(%rsp), %rax /* reload syscall return value */
movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %edi
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
testl %edi, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
jz \exit
xorl %eax, %eax /* do not leak kernel information */
testl %edi, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
jz \exit
xorl %eax, %eax /* Do not leak kernel information */
movq %rax, R11(%rsp)
movq %rax, R10(%rsp)
movq %rax, R9(%rsp)
movq %rax, R8(%rsp)
jmp int_with_check
jmp int_with_check
.endm
sysenter_auditsys:
auditsys_entry_common
movl %ebp,%r9d /* reload 6th syscall arg */
jmp sysenter_dispatch
movl %ebp, %r9d /* reload 6th syscall arg */
jmp sysenter_dispatch
sysexit_audit:
auditsys_exit sysexit_from_sys_call
......@@ -232,7 +231,7 @@ sysexit_audit:
sysenter_fix_flags:
pushq $(X86_EFLAGS_IF|X86_EFLAGS_FIXED)
popfq
jmp sysenter_flags_fixed
jmp sysenter_flags_fixed
sysenter_tracesys:
#ifdef CONFIG_AUDITSYSCALL
......@@ -240,12 +239,12 @@ sysenter_tracesys:
jz sysenter_auditsys
#endif
SAVE_EXTRA_REGS
xorl %eax, %eax /* do not leak kernel information */
xorl %eax, %eax /* Do not leak kernel information */
movq %rax, R11(%rsp)
movq %rax, R10(%rsp)
movq %rax, R9(%rsp)
movq %rax, R8(%rsp)
movq %rsp,%rdi /* &pt_regs -> arg1 */
movq %rsp, %rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
/* Reload arg registers from stack. (see sysenter_tracesys) */
......@@ -253,23 +252,23 @@ sysenter_tracesys:
movl RDX(%rsp), %edx
movl RSI(%rsp), %esi
movl RDI(%rsp), %edi
movl %eax, %eax /* zero extension */
movl %eax, %eax /* zero extension */
RESTORE_EXTRA_REGS
jmp sysenter_do_call
ENDPROC(ia32_sysenter_target)
/*
* 32bit SYSCALL instruction entry.
* 32-bit SYSCALL instruction entry.
*
* 32bit SYSCALL saves rip to rcx, clears rflags.RF, then saves rflags to r11,
* 32-bit SYSCALL saves rip to rcx, clears rflags.RF, then saves rflags to r11,
* then loads new ss, cs, and rip from previously programmed MSRs.
* rflags gets masked by a value from another MSR (so CLD and CLAC
* are not needed). SYSCALL does not save anything on the stack
* and does not change rsp.
*
* Note: rflags saving+masking-with-MSR happens only in Long mode
* (in legacy 32bit mode, IF, RF and VM bits are cleared and that's it).
* (in legacy 32-bit mode, IF, RF and VM bits are cleared and that's it).
* Don't get confused: rflags saving+masking depends on Long Mode Active bit
* (EFER.LMA=1), NOT on bitness of userspace where SYSCALL executes
* or target CS descriptor's L bit (SYSCALL does not read segment descriptors).
......@@ -296,12 +295,12 @@ ENTRY(ia32_cstar_target)
* it is too small to ever cause noticeable irq latency.
*/
SWAPGS_UNSAFE_STACK
movl %esp,%r8d
movq PER_CPU_VAR(cpu_current_top_of_stack),%rsp
movl %esp, %r8d
movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp
ENABLE_INTERRUPTS(CLBR_NONE)
/* Zero-extending 32-bit regs, do not remove */
movl %eax,%eax
movl %eax, %eax
/* Construct struct pt_regs on stack */
pushq $__USER32_DS /* pt_regs->ss */
......@@ -314,55 +313,58 @@ ENTRY(ia32_cstar_target)
pushq %rsi /* pt_regs->si */
pushq %rdx /* pt_regs->dx */
pushq %rbp /* pt_regs->cx */
movl %ebp,%ecx
movl %ebp, %ecx
pushq $-ENOSYS /* pt_regs->ax */
sub $(10*8),%rsp /* pt_regs->r8-11,bp,bx,r12-15 not saved */
sub $(10*8), %rsp /* pt_regs->r8-11, bp, bx, r12-15 not saved */
/*
* no need to do an access_ok check here because r8 has been
* 32bit zero extended
* No need to do an access_ok check here because r8 has been
* 32-bit zero extended:
*/
ASM_STAC
1: movl (%r8),%ebp
_ASM_EXTABLE(1b,ia32_badarg)
1: movl (%r8), %ebp
_ASM_EXTABLE(1b, ia32_badarg)
ASM_CLAC
orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
jnz cstar_tracesys
cstar_do_call:
/* 32bit syscall -> 64bit C ABI argument conversion */
movl %edi,%r8d /* arg5 */
movl %ebp,%r9d /* arg6 */
xchg %ecx,%esi /* rsi:arg2, rcx:arg4 */
movl %ebx,%edi /* arg1 */
movl %edx,%edx /* arg3 (zero extension) */
/* 32-bit syscall -> 64-bit C ABI argument conversion */
movl %edi, %r8d /* arg5 */
movl %ebp, %r9d /* arg6 */
xchg %ecx, %esi /* rsi:arg2, rcx:arg4 */
movl %ebx, %edi /* arg1 */
movl %edx, %edx /* arg3 (zero extension) */
cstar_dispatch:
cmpq $(IA32_NR_syscalls-1),%rax
cmpq $(IA32_NR_syscalls-1), %rax
ja 1f
call *ia32_sys_call_table(,%rax,8)
movq %rax,RAX(%rsp)
call *ia32_sys_call_table(, %rax, 8)
movq %rax, RAX(%rsp)
1:
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
testl $_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
jnz sysretl_audit
testl $_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
jnz sysretl_audit
sysretl_from_sys_call:
andl $~TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
andl $~TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
movl RCX(%rsp), %ebp
RESTORE_RSI_RDI_RDX
movl RIP(%rsp),%ecx
movl EFLAGS(%rsp),%r11d
xorq %r10,%r10
xorq %r9,%r9
xorq %r8,%r8
movl RIP(%rsp), %ecx
movl EFLAGS(%rsp), %r11d
xorq %r10, %r10
xorq %r9, %r9
xorq %r8, %r8
TRACE_IRQS_ON
movl RSP(%rsp),%esp
movl RSP(%rsp), %esp
/*
* 64bit->32bit SYSRET restores eip from ecx,
* 64-bit->32-bit SYSRET restores eip from ecx,
* eflags from r11 (but RF and VM bits are forced to 0),
* cs and ss are loaded from MSRs.
* (Note: 32bit->32bit SYSRET is different: since r11
* (Note: 32-bit->32-bit SYSRET is different: since r11
* does not exist, it merely sets eflags.IF=1).
*
* NB: On AMD CPUs with the X86_BUG_SYSRET_SS_ATTRS bug, the ss
......@@ -377,8 +379,8 @@ sysretl_from_sys_call:
#ifdef CONFIG_AUDITSYSCALL
cstar_auditsys:
auditsys_entry_common
movl %ebp, %r9d /* reload 6th syscall arg */
jmp cstar_dispatch
movl %ebp, %r9d /* reload 6th syscall arg */
jmp cstar_dispatch
sysretl_audit:
auditsys_exit sysretl_from_sys_call
......@@ -386,16 +388,16 @@ sysretl_audit:
cstar_tracesys:
#ifdef CONFIG_AUDITSYSCALL
testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
jz cstar_auditsys
testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
jz cstar_auditsys
#endif
SAVE_EXTRA_REGS
xorl %eax, %eax /* do not leak kernel information */
xorl %eax, %eax /* Do not leak kernel information */
movq %rax, R11(%rsp)
movq %rax, R10(%rsp)
movq %rax, R9(%rsp)
movq %rax, R8(%rsp)
movq %rsp, %rdi /* &pt_regs -> arg1 */
movq %rsp, %rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
/* Reload arg registers from stack. (see sysenter_tracesys) */
......@@ -403,24 +405,24 @@ cstar_tracesys:
movl RDX(%rsp), %edx
movl RSI(%rsp), %esi
movl RDI(%rsp), %edi
movl %eax, %eax /* zero extension */
movl %eax, %eax /* zero extension */
RESTORE_EXTRA_REGS
jmp cstar_do_call
END(ia32_cstar_target)
ia32_badarg:
ASM_CLAC
movq $-EFAULT,%rax
jmp ia32_sysret
movq $-EFAULT, %rax
jmp ia32_sysret
ia32_ret_from_sys_call:
xorl %eax, %eax /* do not leak kernel information */
xorl %eax, %eax /* Do not leak kernel information */
movq %rax, R11(%rsp)
movq %rax, R10(%rsp)
movq %rax, R9(%rsp)
movq %rax, R8(%rsp)
jmp int_ret_from_sys_call
jmp int_ret_from_sys_call
/*
* Emulated IA32 system calls via int 0x80.
......@@ -454,7 +456,7 @@ ENTRY(ia32_syscall)
ENABLE_INTERRUPTS(CLBR_NONE)
/* Zero-extending 32-bit regs, do not remove */
movl %eax,%eax
movl %eax, %eax
/* Construct struct pt_regs on stack (iret frame is already on stack) */
pushq %rax /* pt_regs->orig_ax */
......@@ -468,30 +470,33 @@ ENTRY(ia32_syscall)
pushq $0 /* pt_regs->r10 */
pushq $0 /* pt_regs->r11 */
cld
sub $(6*8),%rsp /* pt_regs->bp,bx,r12-15 not saved */
sub $(6*8), %rsp /* pt_regs->bp, bx, r12-15 not saved */
orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
jnz ia32_tracesys
orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
jnz ia32_tracesys
ia32_do_call:
/* 32bit syscall -> 64bit C ABI argument conversion */
movl %edi,%r8d /* arg5 */
movl %ebp,%r9d /* arg6 */
xchg %ecx,%esi /* rsi:arg2, rcx:arg4 */
movl %ebx,%edi /* arg1 */
movl %edx,%edx /* arg3 (zero extension) */
cmpq $(IA32_NR_syscalls-1),%rax
/* 32-bit syscall -> 64-bit C ABI argument conversion */
movl %edi, %r8d /* arg5 */
movl %ebp, %r9d /* arg6 */
xchg %ecx, %esi /* rsi:arg2, rcx:arg4 */
movl %ebx, %edi /* arg1 */
movl %edx, %edx /* arg3 (zero extension) */
cmpq $(IA32_NR_syscalls-1), %rax
ja 1f
call *ia32_sys_call_table(,%rax,8) # xxx: rip relative
call *ia32_sys_call_table(, %rax, 8) /* RIP relative */
ia32_sysret:
movq %rax,RAX(%rsp)
movq %rax, RAX(%rsp)
1:
jmp int_ret_from_sys_call
jmp int_ret_from_sys_call
ia32_tracesys:
SAVE_EXTRA_REGS
movq %rsp,%rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
movq %rsp, %rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
/*
* Reload arg registers from stack in case ptrace changed them.
* Don't reload %eax because syscall_trace_enter() returned
......@@ -503,33 +508,33 @@ ia32_tracesys:
movl RDX(%rsp), %edx
movl RSI(%rsp), %esi
movl RDI(%rsp), %edi
movl %eax, %eax /* zero extension */
movl %eax, %eax /* zero extension */
RESTORE_EXTRA_REGS
jmp ia32_do_call
jmp ia32_do_call
END(ia32_syscall)
.macro PTREGSCALL label, func
ALIGN
GLOBAL(\label)
leaq \func(%rip),%rax
jmp ia32_ptregs_common
leaq \func(%rip), %rax
jmp ia32_ptregs_common
.endm
PTREGSCALL stub32_rt_sigreturn, sys32_rt_sigreturn
PTREGSCALL stub32_sigreturn, sys32_sigreturn
PTREGSCALL stub32_fork, sys_fork
PTREGSCALL stub32_vfork, sys_vfork
PTREGSCALL stub32_rt_sigreturn, sys32_rt_sigreturn
PTREGSCALL stub32_sigreturn, sys32_sigreturn
PTREGSCALL stub32_fork, sys_fork
PTREGSCALL stub32_vfork, sys_vfork
ALIGN
GLOBAL(stub32_clone)
leaq sys_clone(%rip),%rax
leaq sys_clone(%rip), %rax
mov %r8, %rcx
jmp ia32_ptregs_common
jmp ia32_ptregs_common
ALIGN
ia32_ptregs_common:
SAVE_EXTRA_REGS 8
call *%rax
call *%rax
RESTORE_EXTRA_REGS 8
ret
END(ia32_ptregs_common)
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment