wilc1000: move wilc driver out of staging

WILC1000 is an IEEE 802.11 b/g/n IoT link controller module. The
WILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other
processors with minimal resource requirements with a simple
SPI/SDIO-to-Wi-Fi interface.

WILC1000 driver has been part of staging for few years. With
contributions from the community, it has improved significantly. Full
driver review has helped in achieving the current state.
The details for those reviews are captured in 1 & 2.

[1]. https://lore.kernel.org/linux-wireless/1537957525-11467-1-git-send-email-ajay.kathat@microchip.com/
[2]. https://lore.kernel.org/linux-wireless/1562896697-8002-1-git-send-email-ajay.kathat@microchip.com/Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

MAINTAINERS

@@ -11362,6 +11362,13 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	drivers/usb/gadget/udc/atmel_usba_udc.*
 
+MICROCHIP WILC1000 WIFI DRIVER
+M:	Adham Abozaeid <adham.abozaeid@microchip.com>
+M:	Ajay Singh <ajay.kathat@microchip.com>
+L:	linux-wireless@vger.kernel.org
+S:	Supported
+F:	drivers/net/wireless/microchip/wilc1000/
+
 MICROCHIP XDMA DRIVER
 M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	linux-arm-kernel@lists.infradead.org
@@ -16251,13 +16258,6 @@ M:	Forest Bond <forest@alittletooquiet.net>
 S:	Odd Fixes
 F:	drivers/staging/vt665?/
 
-STAGING - WILC1000 WIFI DRIVER
-M:	Adham Abozaeid <adham.abozaeid@microchip.com>
-M:	Ajay Singh <ajay.kathat@microchip.com>
-L:	linux-wireless@vger.kernel.org
-S:	Supported
-F:	drivers/staging/wilc1000/
-
 STAGING SUBSYSTEM
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	devel@driverdev.osuosl.org

drivers/net/wireless/Kconfig

@@ -40,6 +40,7 @@ source "drivers/net/wireless/intel/Kconfig"
 source "drivers/net/wireless/intersil/Kconfig"
 source "drivers/net/wireless/marvell/Kconfig"
 source "drivers/net/wireless/mediatek/Kconfig"
+source "drivers/net/wireless/microchip/Kconfig"
 source "drivers/net/wireless/ralink/Kconfig"
 source "drivers/net/wireless/realtek/Kconfig"
 source "drivers/net/wireless/rsi/Kconfig"

drivers/net/wireless/Makefile

@@ -12,6 +12,7 @@ obj-$(CONFIG_WLAN_VENDOR_INTEL) += intel/
 obj-$(CONFIG_WLAN_VENDOR_INTERSIL) += intersil/
 obj-$(CONFIG_WLAN_VENDOR_MARVELL) += marvell/
 obj-$(CONFIG_WLAN_VENDOR_MEDIATEK) += mediatek/
+obj-$(CONFIG_WLAN_VENDOR_MICROCHIP) += microchip/
 obj-$(CONFIG_WLAN_VENDOR_RALINK) += ralink/
 obj-$(CONFIG_WLAN_VENDOR_REALTEK) += realtek/
 obj-$(CONFIG_WLAN_VENDOR_RSI) += rsi/

drivers/net/wireless/microchip/Kconfig

+# SPDX-License-Identifier: GPL-2.0
+config WLAN_VENDOR_MICROCHIP
+	bool "Microchip devices"
+	default y
+	help
+	If you have a wireless card belonging to this class, say Y.
+
+	Note that the answer to this question doesn't directly affect the
+	kernel: saying N will just cause the configurator to skip all the
+	questions about these cards. If you say Y, you will be asked for
+	your specific card in the following questions.
+
+if WLAN_VENDOR_MICROCHIP
+source "drivers/net/wireless/microchip/wilc1000/Kconfig"
+endif # WLAN_VENDOR_MICROCHIP

drivers/net/wireless/microchip/Makefile

+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_WILC1000)		+= wilc1000/

drivers/staging/Kconfig

@@ -84,8 +84,6 @@ source "drivers/staging/fbtft/Kconfig"
 
 source "drivers/staging/fsl-dpaa2/Kconfig"
 
-source "drivers/staging/wilc1000/Kconfig"
-
 source "drivers/staging/most/Kconfig"
 
 source "drivers/staging/ks7010/Kconfig"

drivers/staging/Makefile

@@ -32,7 +32,6 @@ obj-$(CONFIG_UNISYSSPAR)	+= unisys/
 obj-$(CONFIG_COMMON_CLK_XLNX_CLKWZRD)	+= clocking-wizard/
 obj-$(CONFIG_FB_TFT)		+= fbtft/
 obj-$(CONFIG_FSL_DPAA2)		+= fsl-dpaa2/
-obj-$(CONFIG_WILC1000)		+= wilc1000/
 obj-$(CONFIG_MOST)		+= most/
 obj-$(CONFIG_KS7010)		+= ks7010/
 obj-$(CONFIG_GREYBUS)		+= greybus/