ARM: dts: NSP: Add dma-coherent to relevant DT entries

Cache related issues with DMA rings and performance issues related to
caching are being caused by not properly setting the "dma-coherent" flag
in the device tree entries.  Adding it here to correct the issue.
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Fixes: 3107fa5b ("ARM: dts: NSP: Add SD/MMC support")
Fixes: 13d04f20 ("ARM: dts: NSP: Add AMAC entries")
Fixes: 5aeda7bf ("ARM: dts: NSP: Add and enable amac2")
Fixes: 17d51717 ("ARM: dts: NSP: Add mailbox (PDC) to NSP")
Fixes: 1d8ece66 ("ARM: dts: NSP: Add EHCI/OHCI USB nodes to device tree")
Fixes: 0f9f27a3 ("ARM: dts: NSP: Add I2C support to the DT")
Fixes: 8dbcad02 ("ARM: dts: nsp: Add sata device tree entry")
Fixes: 52219902 ("ARM: dts: NSP: Fix PCIE DT issue")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

arch/arm/boot/dts/bcm-nsp.dtsi

@@ -215,6 +215,7 @@ sdio: sdhci@21000 {
 			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
 			sdhci,auto-cmd12;
 			clocks = <&lcpll0 BCM_NSP_LCPLL0_SDIO_CLK>;
+			dma-coherent;
 			status = "disabled";
 		};
 
@@ -224,6 +225,7 @@ amac0: ethernet@22000 {
 			      <0x110000 0x1000>;
 			reg-names = "amac_base", "idm_base";
 			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 			status = "disabled";
 		};
 
@@ -233,6 +235,7 @@ amac1: ethernet@23000 {
 			      <0x111000 0x1000>;
 			reg-names = "amac_base", "idm_base";
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 			status = "disabled";
 		};
 
@@ -242,6 +245,7 @@ amac2: ethernet@24000 {
 			      <0x112000 0x1000>;
 			reg-names = "amac_base", "idm_base";
 			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 			status = "disabled";
 		};
 
@@ -252,6 +256,7 @@ mailbox: mailbox@25000 {
 			#mbox-cells = <1>;
 			brcm,rx-status-len = <32>;
 			brcm,use-bcm-hdr;
+			dma-coherent;
 		};
 
 		nand: nand@26000 {
@@ -325,6 +330,7 @@ ehci0: usb@2a000 {
 			compatible = "generic-ehci";
 			reg = <0x2a000 0x100>;
 			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 			status = "disabled";
 		};
 
@@ -332,6 +338,7 @@ ohci0: usb@2b000 {
 			compatible = "generic-ohci";
 			reg = <0x2b000 0x100>;
 			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 			status = "disabled";
 		};
 
@@ -376,6 +383,7 @@ i2c0: i2c@38000 {
 			#size-cells = <0>;
 			interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
 			clock-frequency = <100000>;
+			dma-coherent;
 			status = "disabled";
 		};
 
@@ -446,6 +454,7 @@ sata: ahci@41000 {
 			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			dma-coherent;
 			status = "disabled";
 
 			sata0: sata-port@0 {
@@ -483,6 +492,7 @@ pcie0: pcie@18012000 {
 		 */
 		ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
 
+		dma-coherent;
 		status = "disabled";
 
 		msi-parent = <&msi0>;
@@ -519,6 +529,7 @@ pcie1: pcie@18013000 {
 		 */
 		ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
 
+		dma-coherent;
 		status = "disabled";
 
 		msi-parent = <&msi1>;
@@ -555,6 +566,7 @@ pcie2: pcie@18014000 {
 		 */
 		ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>;
 
+		dma-coherent;
 		status = "disabled";
 
 		msi-parent = <&msi2>;