Commit 5748150e authored by José Miguel Gonçalves's avatar José Miguel Gonçalves Committed by Linus Torvalds

drivers/hwmon/adcxx.c: fix for single-channel ADCs

While testing an ADC121S021 in an embedded board with a S3C2142 SoC (ARM
core), I have found that the 'adcxx' driver does not handle correctly
single channel ADCs from this chip family.  For single channel chips you
must only issue one read transfer for correct measurement.
Signed-off-by: default avatarJose Miguel Goncalves <jose.goncalves@inov.pt>
Cc: Marc Pignat <marc.pignat@hevs.ch>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 4cae7878
......@@ -62,18 +62,23 @@ static ssize_t adcxx_read(struct device *dev,
struct spi_device *spi = to_spi_device(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adcxx *adc = dev_get_drvdata(&spi->dev);
u8 tx_buf[2] = { attr->index << 3 }; /* other bits are don't care */
u8 tx_buf[2];
u8 rx_buf[2];
int status;
int value;
u32 value;
if (mutex_lock_interruptible(&adc->lock))
return -ERESTARTSYS;
if (adc->channels == 1) {
status = spi_read(spi, rx_buf, sizeof(rx_buf));
} else {
tx_buf[0] = attr->index << 3; /* other bits are don't care */
status = spi_write_then_read(spi, tx_buf, sizeof(tx_buf),
rx_buf, sizeof(rx_buf));
}
if (status < 0) {
dev_warn(dev, "spi_write_then_read failed with status %d\n",
dev_warn(dev, "SPI synch. transfer failed with status %d\n",
status);
goto out;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment