[PATCH] Added support for 82546 Quad-port adapter

* Added support for 82546 Quad-port adapter

drivers/net/e1000/e1000_hw.c

@@ -185,6 +185,7 @@ e1000_set_mac_type(struct e1000_hw *hw)
         break;
     case E1000_DEV_ID_82546EB_COPPER:
     case E1000_DEV_ID_82546EB_FIBER:
+    case E1000_DEV_ID_82546EB_QUAD_COPPER:
         hw->mac_type = e1000_82546;
         break;
     case E1000_DEV_ID_82541EI:
@@ -3801,6 +3802,7 @@ e1000_setup_led(struct e1000_hw *hw)
     case E1000_DEV_ID_82540EM_LOM:
     case E1000_DEV_ID_82545EM_COPPER:
     case E1000_DEV_ID_82546EB_COPPER:
+    case E1000_DEV_ID_82546EB_QUAD_COPPER:
     case E1000_DEV_ID_82541EI:
     case E1000_DEV_ID_82541EP:
     case E1000_DEV_ID_82547EI:
@@ -3842,6 +3844,7 @@ e1000_cleanup_led(struct e1000_hw *hw)
     case E1000_DEV_ID_82545EM_FIBER:
     case E1000_DEV_ID_82546EB_COPPER:
     case E1000_DEV_ID_82546EB_FIBER:
+    case E1000_DEV_ID_82546EB_QUAD_COPPER:
     case E1000_DEV_ID_82541EI:
     case E1000_DEV_ID_82541EP:
     case E1000_DEV_ID_82547EI:
@@ -3896,6 +3899,7 @@ e1000_led_on(struct e1000_hw *hw)
     case E1000_DEV_ID_82540EM_LOM:
     case E1000_DEV_ID_82545EM_COPPER:
     case E1000_DEV_ID_82546EB_COPPER:
+    case E1000_DEV_ID_82546EB_QUAD_COPPER:
     case E1000_DEV_ID_82541EI:
     case E1000_DEV_ID_82541EP:
     case E1000_DEV_ID_82547EI:
@@ -3949,6 +3953,7 @@ e1000_led_off(struct e1000_hw *hw)
     case E1000_DEV_ID_82540EM_LOM:
     case E1000_DEV_ID_82545EM_COPPER:
     case E1000_DEV_ID_82546EB_COPPER:
+    case E1000_DEV_ID_82546EB_QUAD_COPPER:
     case E1000_DEV_ID_82541EI:
     case E1000_DEV_ID_82541EP:
     case E1000_DEV_ID_82547EI:
@@ -4206,7 +4211,11 @@ e1000_get_bus_info(struct e1000_hw *hw)
     status = E1000_READ_REG(hw, STATUS);
     hw->bus_type = (status & E1000_STATUS_PCIX_MODE) ?
                    e1000_bus_type_pcix : e1000_bus_type_pci;
-    if(hw->bus_type == e1000_bus_type_pci) {
+
+    if(hw->device_id == E1000_DEV_ID_82546EB_QUAD_COPPER) {
+        hw->bus_speed = (hw->bus_type == e1000_bus_type_pci) ?
+                        e1000_bus_speed_66 : e1000_bus_speed_120;
+    } else if(hw->bus_type == e1000_bus_type_pci) {
         hw->bus_speed = (status & E1000_STATUS_PCI66) ?
                         e1000_bus_speed_66 : e1000_bus_speed_33;
     } else {

drivers/net/e1000/e1000_hw.h

@@ -99,6 +99,7 @@ typedef enum {
     e1000_bus_speed_33,
     e1000_bus_speed_66,
     e1000_bus_speed_100,
+    e1000_bus_speed_120,
     e1000_bus_speed_133,
     e1000_bus_speed_reserved
 } e1000_bus_speed;
@@ -314,10 +315,11 @@ void e1000_write_reg_io(struct e1000_hw *hw, uint32_t offset, uint32_t value);
 #define E1000_DEV_ID_82545EM_FIBER       0x1011
 #define E1000_DEV_ID_82546EB_COPPER      0x1010
 #define E1000_DEV_ID_82546EB_FIBER       0x1012
+#define E1000_DEV_ID_82546EB_QUAD_COPPER 0x101D
 #define E1000_DEV_ID_82541EI             0x1013
 #define E1000_DEV_ID_82541EP             0x1018
 #define E1000_DEV_ID_82547EI             0x1019
-#define NUM_DEV_IDS 19
+#define NUM_DEV_IDS 20
 
 #define NODE_ADDRESS_SIZE 6
 #define ETH_LENGTH_OF_ADDRESS 6

drivers/net/e1000/e1000_main.c

@@ -88,6 +88,7 @@ static struct pci_device_id e1000_pci_tbl[] __devinitdata = {
 	{0x8086, 0x1016, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{0x8086, 0x1017, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{0x8086, 0x101E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{0x8086, 0x101D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{0x8086, 0x1013, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{0x8086, 0x1019, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	/* required last entry */