Commit 581ae76e authored by Chen-Yu Tsai's avatar Chen-Yu Tsai

ARM: dts: sun8i: a83t: h8homlet: Enable micro-SD card and onboard eMMC

The H8 homlet has a micro-SD card slot connected to mmc0,
and onboard eMMC from FORESEE, connected to mmc2.
Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
Acked-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent 06b234ac
...@@ -43,6 +43,7 @@ ...@@ -43,6 +43,7 @@
/dts-v1/; /dts-v1/;
#include "sun8i-a83t.dtsi" #include "sun8i-a83t.dtsi"
#include "sunxi-common-regulators.dtsi"
/ { / {
model = "Allwinner A83T H8Homlet Proto Dev Board v2.0"; model = "Allwinner A83T H8Homlet Proto Dev Board v2.0";
...@@ -57,6 +58,26 @@ chosen { ...@@ -57,6 +58,26 @@ chosen {
}; };
}; };
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v0>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
bus-width = <4>;
cd-inverted;
status = "okay";
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_8bit_emmc_pins>;
vmmc-supply = <&reg_vcc3v0>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
status = "okay";
};
&uart0 { &uart0 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>; pinctrl-0 = <&uart0_pb_pins>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment