wil6210: introduce separate completion for WMI

re-use of wmi_ready for both FW ready event and for wmi_call was causing
false "FW not ready" indication in case wmi_call() was invoked while reset
took place.
add wmi_call completion variable instead of re-using wmi_ready.
Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/wil6210/main.c

@@ -286,6 +286,7 @@ int wil_priv_init(struct wil6210_priv *wil)
 	mutex_init(&wil->wmi_mutex);
 
 	init_completion(&wil->wmi_ready);
+	init_completion(&wil->wmi_call);
 
 	wil->pending_connect_cid = -1;
 	setup_timer(&wil->connect_timer, wil_connect_timer_fn, (ulong)wil);
@@ -536,6 +537,7 @@ int wil_reset(struct wil6210_priv *wil)
 	/* init after reset */
 	wil->pending_connect_cid = -1;
 	reinit_completion(&wil->wmi_ready);
+	reinit_completion(&wil->wmi_call);
 
 	wil6210_enable_irq(wil);
 

drivers/net/wireless/ath/wil6210/wil6210.h

@@ -399,6 +399,7 @@ struct wil6210_priv {
 	struct mutex wmi_mutex;
 	struct wil6210_mbox_ctl mbox_ctl;
 	struct completion wmi_ready;
+	struct completion wmi_call;
 	u16 wmi_seq;
 	u16 reply_id; /**< wait for this WMI event */
 	void *reply_buf;

drivers/net/wireless/ath/wil6210/wmi.c

@@ -300,7 +300,7 @@ static void wmi_evt_fw_ready(struct wil6210_priv *wil, int id, void *d,
 	wil_dbg_wmi(wil, "WMI: got FW ready event\n");
 
 	set_bit(wil_status_fwready, &wil->status);
-	/* reuse wmi_ready for the firmware ready indication */
+	/* let the reset sequence continue */
 	complete(&wil->wmi_ready);
 }
 
@@ -764,7 +764,7 @@ int wmi_call(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len,
 	wil->reply_id = reply_id;
 	wil->reply_buf = reply;
 	wil->reply_size = reply_size;
-	remain = wait_for_completion_timeout(&wil->wmi_ready,
+	remain = wait_for_completion_timeout(&wil->wmi_call,
 					     msecs_to_jiffies(to_msec));
 	if (0 == remain) {
 		wil_err(wil, "wmi_call(0x%04x->0x%04x) timeout %d msec\n",
@@ -1160,7 +1160,7 @@ static void wmi_event_handle(struct wil6210_priv *wil,
 						     len - sizeof(*wmi));
 			}
 			wil_dbg_wmi(wil, "Complete WMI 0x%04x\n", id);
-			complete(&wil->wmi_ready);
+			complete(&wil->wmi_call);
 			return;
 		}
 		/* unsolicited event */