e1000e: Add support for Alder Lake

Add devices ID's for the next LOM generations that will be
available on the next Intel Client platform (Alder Lake)
This patch provides the initial support for these devices
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/e1000e/ethtool.c

@@ -897,6 +897,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 	case e1000_pch_cnp:
 		/* fall through */
 	case e1000_pch_tgp:
+	case e1000_pch_adp:
 		mask |= BIT(18);
 		break;
 	default:
@@ -1561,6 +1562,7 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
 	case e1000_pch_spt:
 	case e1000_pch_cnp:
 	case e1000_pch_tgp:
+	case e1000_pch_adp:
 		fext_nvm11 = er32(FEXTNVM11);
 		fext_nvm11 &= ~E1000_FEXTNVM11_DISABLE_MULR_FIX;
 		ew32(FEXTNVM11, fext_nvm11);

drivers/net/ethernet/intel/e1000e/hw.h

@@ -97,6 +97,10 @@ struct e1000_hw;
 #define E1000_DEV_ID_PCH_TGP_I219_LM14		0x15F9
 #define E1000_DEV_ID_PCH_TGP_I219_V14		0x15FA
 #define E1000_DEV_ID_PCH_TGP_I219_LM15		0x15F4
+#define E1000_DEV_ID_PCH_ADP_I219_LM16		0x1A1E
+#define E1000_DEV_ID_PCH_ADP_I219_V16		0x1A1F
+#define E1000_DEV_ID_PCH_ADP_I219_LM17		0x1A1C
+#define E1000_DEV_ID_PCH_ADP_I219_V17		0x1A1D
 
 #define E1000_REVISION_4	4
 
@@ -121,6 +125,7 @@ enum e1000_mac_type {
 	e1000_pch_spt,
 	e1000_pch_cnp,
 	e1000_pch_tgp,
+	e1000_pch_adp,
 };
 
 enum e1000_media_type {

drivers/net/ethernet/intel/e1000e/ich8lan.c

@@ -317,6 +317,7 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
 	case e1000_pch_spt:
 	case e1000_pch_cnp:
 	case e1000_pch_tgp:
+	case e1000_pch_adp:
 		if (e1000_phy_is_accessible_pchlan(hw))
 			break;
 
@@ -460,6 +461,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
 		case e1000_pch_spt:
 		case e1000_pch_cnp:
 		case e1000_pch_tgp:
+		case e1000_pch_adp:
 			/* In case the PHY needs to be in mdio slow mode,
 			 * set slow mode and try to get the PHY id again.
 			 */
@@ -703,6 +705,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw)
 	case e1000_pch_spt:
 	case e1000_pch_cnp:
 	case e1000_pch_tgp:
+	case e1000_pch_adp:
 	case e1000_pchlan:
 		/* check management mode */
 		mac->ops.check_mng_mode = e1000_check_mng_mode_pchlan;
@@ -1642,6 +1645,7 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
 	case e1000_pch_spt:
 	case e1000_pch_cnp:
 	case e1000_pch_tgp:
+	case e1000_pch_adp:
 		rc = e1000_init_phy_params_pchlan(hw);
 		break;
 	default:
@@ -2095,6 +2099,7 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
 	case e1000_pch_spt:
 	case e1000_pch_cnp:
 	case e1000_pch_tgp:
+	case e1000_pch_adp:
 		sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
 		break;
 	default:
@@ -3133,6 +3138,7 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
 	case e1000_pch_spt:
 	case e1000_pch_cnp:
 	case e1000_pch_tgp:
+	case e1000_pch_adp:
 		bank1_offset = nvm->flash_bank_size;
 		act_offset = E1000_ICH_NVM_SIG_WORD;
 
@@ -4077,6 +4083,7 @@ static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw)
 	case e1000_pch_spt:
 	case e1000_pch_cnp:
 	case e1000_pch_tgp:
+	case e1000_pch_adp:
 		word = NVM_COMPAT;
 		valid_csum_mask = NVM_COMPAT_VALID_CSUM;
 		break;

drivers/net/ethernet/intel/e1000e/netdev.c

@@ -3536,6 +3536,7 @@ s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca)
 		break;
 	case e1000_pch_cnp:
 	case e1000_pch_tgp:
+	case e1000_pch_adp:
 		if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI) {
 			/* Stable 24MHz frequency */
 			incperiod = INCPERIOD_24MHZ;
@@ -4049,6 +4050,7 @@ void e1000e_reset(struct e1000_adapter *adapter)
 	case e1000_pch_cnp:
 		/* fall-through */
 	case e1000_pch_tgp:
+	case e1000_pch_adp:
 		fc->refresh_time = 0xFFFF;
 		fc->pause_time = 0xFFFF;
 
@@ -7760,6 +7762,10 @@ static const struct pci_device_id e1000_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_LM14), board_pch_cnp },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_V14), board_pch_cnp },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_LM15), board_pch_cnp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_LM16), board_pch_cnp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_V16), board_pch_cnp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_LM17), board_pch_cnp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_V17), board_pch_cnp },
 
 	{ 0, 0, 0, 0, 0, 0, 0 }	/* terminate list */
 };

drivers/net/ethernet/intel/e1000e/ptp.c

@@ -297,6 +297,7 @@ void e1000e_ptp_init(struct e1000_adapter *adapter)
 	case e1000_pch_cnp:
 		/* fall-through */
 	case e1000_pch_tgp:
+	case e1000_pch_adp:
 		if ((hw->mac.type < e1000_pch_lpt) ||
 		    (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)) {
 			adapter->ptp_clock_info.max_adj = 24000000 - 1;