drm/i915/icl: Program HS_TX_TIMEOUT/LP_RX_TIMEOUT/TA_TIMEOUT registers
Program the timeout values (in escape clock) for HS TX, LP RX and TA timeout. HX TX: Ensure that host does not continuously transmit in the HS state. If this timer expires, then host will gracefully end its HS transmission and allow the link to enter into LP state. LP RX: Monitor the length of LP receptions from Peripheral. If timeout happens then host will drive the stop state onto all data lanes (only Data Lane 0 should be receiving anything from the Peripheral). This effectively takes back ownership of the bus transmit in the HS state. TA timeout: Timeout valuefor monitoring Bus Turn-Around (BTA) sequence. BTA sequence should complete within a bounded amount of time, with peripheral acknowledging BTA by driving the stop state. v2 by Jani: - Rebase - Use intel_dsi_bitrate() and intel_dsi_tlpx_ns(intel_dsi) - Squash HX TX, LP RX and TA timeout into one patch - Fix bspec mode set sequence reference - Add FIXME about two timeouts Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/60e610ccffe5f8c09dee1c65828f28f25227efce.1540900289.git.jani.nikula@intel.com
Showing
Please register or sign in to comment