[ARM] 5522/1: PalmLD: IDE support

Support for Palm LifeDrive's internal harddrive.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-pxa/include/mach/palmld.h

@@ -56,7 +56,6 @@
 #define GPIO_NR_PALMLD_LED_AMBER	94
 
 /* IDE */
-#define GPIO_NR_PALMLD_IDE_IRQ		95
 #define GPIO_NR_PALMLD_IDE_RESET	98
 #define GPIO_NR_PALMLD_IDE_PWEN		115
 

arch/arm/mach-pxa/palmld.c

@@ -127,7 +127,7 @@ static unsigned long palmld_pin_config[] __initdata = {
 	GPIO81_GPIO,	/* wifi reset */
 
 	/* HDD */
-	GPIO95_GPIO,	/* HDD irq */
+	GPIO98_GPIO,	/* HDD reset */
 	GPIO115_GPIO,	/* HDD power */
 
 	/* MISC */
@@ -493,6 +493,14 @@ static struct platform_device palmld_asoc = {
 	},
 };
 
+/******************************************************************************
+ * HDD
+ ******************************************************************************/
+static struct platform_device palmld_hdd = {
+	.name	= "pata_palmld",
+	.id	= -1,
+};
+
 /******************************************************************************
  * Framebuffer
  ******************************************************************************/
@@ -557,6 +565,7 @@ static struct platform_device *devices[] __initdata = {
 	&palmld_leds,
 	&power_supply,
 	&palmld_asoc,
+	&palmld_hdd,
 };
 
 static struct map_desc palmld_io_desc[] __initdata = {

drivers/ata/Kconfig

@@ -535,6 +535,15 @@ config PATA_OPTIDMA
 
 	  If unsure, say N.
 
+config PATA_PALMLD
+	tristate "Palm LifeDrive PATA support"
+	depends on MACH_PALMLD
+	help
+	  This option enables support for Palm LifeDrive's internal ATA
+	  port via the new ATA layer.
+
+	  If unsure, say N.
+
 config PATA_PCMCIA
 	tristate "PCMCIA PATA support"
 	depends on PCMCIA

drivers/ata/Makefile

@@ -50,6 +50,7 @@ obj-$(CONFIG_PATA_MPC52xx)	+= pata_mpc52xx.o
 obj-$(CONFIG_PATA_MARVELL)	+= pata_marvell.o
 obj-$(CONFIG_PATA_MPIIX)	+= pata_mpiix.o
 obj-$(CONFIG_PATA_OLDPIIX)	+= pata_oldpiix.o
+obj-$(CONFIG_PATA_PALMLD)	+= pata_palmld.o
 obj-$(CONFIG_PATA_PCMCIA)	+= pata_pcmcia.o
 obj-$(CONFIG_PATA_PDC2027X)	+= pata_pdc2027x.o
 obj-$(CONFIG_PATA_PDC_OLD)	+= pata_pdc202xx_old.o

drivers/ata/pata_palmld.c

+/*
+ * drivers/ata/pata_palmld.c
+ *
+ * Driver for IDE channel in Palm LifeDrive
+ *
+ * Based on research of:
+ *		Alex Osborne <ato@meshy.org>
+ *
+ * Rewrite for mainline:
+ *		Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Rewritten version based on pata_ixp4xx_cf.c:
+ * ixp4xx PATA/Compact Flash driver
+ * Copyright (C) 2006-07 Tower Technologies
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/libata.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <scsi/scsi_host.h>
+#include <mach/palmld.h>
+
+#define DRV_NAME "pata_palmld"
+
+static struct scsi_host_template palmld_sht = {
+	ATA_PIO_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations palmld_port_ops = {
+	.inherits		= &ata_sff_port_ops,
+	.sff_data_xfer		= ata_sff_data_xfer_noirq,
+	.cable_detect		= ata_cable_40wire,
+};
+
+static __devinit int palmld_pata_probe(struct platform_device *pdev)
+{
+	struct ata_host *host;
+	struct ata_port *ap;
+	void __iomem *mem;
+	int ret;
+
+	/* allocate host */
+	host = ata_host_alloc(&pdev->dev, 1);
+	if (!host)
+		return -ENOMEM;
+
+	/* remap drive's physical memory address */
+	mem = devm_ioremap(&pdev->dev, PALMLD_IDE_PHYS, 0x1000);
+	if (!mem)
+		return -ENOMEM;
+
+	/* request and activate power GPIO, IRQ GPIO */
+	ret = gpio_request(GPIO_NR_PALMLD_IDE_PWEN, "HDD PWR");
+	if (ret)
+		goto err1;
+	ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_PWEN, 1);
+	if (ret)
+		goto err2;
+
+	ret = gpio_request(GPIO_NR_PALMLD_IDE_RESET, "HDD RST");
+	if (ret)
+		goto err2;
+	ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_RESET, 0);
+	if (ret)
+		goto err3;
+
+	/* reset the drive */
+	gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 0);
+	msleep(30);
+	gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 1);
+	msleep(30);
+
+	/* setup the ata port */
+	ap = host->ports[0];
+	ap->ops	= &palmld_port_ops;
+	ap->pio_mask = ATA_PIO4;
+	ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_PIO_POLLING;
+
+	/* memory mapping voodoo */
+	ap->ioaddr.cmd_addr = mem + 0x10;
+	ap->ioaddr.altstatus_addr = mem + 0xe;
+	ap->ioaddr.ctl_addr = mem + 0xe;
+
+	/* start the port */
+	ata_sff_std_ports(&ap->ioaddr);
+
+	/* activate host */
+	return ata_host_activate(host, 0, NULL, IRQF_TRIGGER_RISING,
+					&palmld_sht);
+
+err3:
+	gpio_free(GPIO_NR_PALMLD_IDE_RESET);
+err2:
+	gpio_free(GPIO_NR_PALMLD_IDE_PWEN);
+err1:
+	return ret;
+}
+
+static __devexit int palmld_pata_remove(struct platform_device *dev)
+{
+	struct ata_host *host = platform_get_drvdata(dev);
+
+	ata_host_detach(host);
+
+	/* power down the HDD */
+	gpio_set_value(GPIO_NR_PALMLD_IDE_PWEN, 0);
+
+	gpio_free(GPIO_NR_PALMLD_IDE_RESET);
+	gpio_free(GPIO_NR_PALMLD_IDE_PWEN);
+
+	return 0;
+}
+
+static struct platform_driver palmld_pata_platform_driver = {
+	.driver	 = {
+		.name   = DRV_NAME,
+		.owner  = THIS_MODULE,
+	},
+	.probe		= palmld_pata_probe,
+	.remove		= __devexit_p(palmld_pata_remove),
+};
+
+static int __init palmld_pata_init(void)
+{
+	return platform_driver_register(&palmld_pata_platform_driver);
+}
+
+static void __exit palmld_pata_exit(void)
+{
+	platform_driver_unregister(&palmld_pata_platform_driver);
+}
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("PalmLD PATA driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
+
+module_init(palmld_pata_init);
+module_exit(palmld_pata_exit);