Commit 5ab6329c authored by Hauke Mehrtens's avatar Hauke Mehrtens Committed by David S. Miller

b44: rename B44_PHY_ADDR_NO_PHY to B44_PHY_ADDR_NO_LOCAL_PHY

The PHY address 30 means there is no local PHY, but there could be an
external PHY like a switch connected via MII. This is the case on most
embedded home routers where this driver is used.
Signed-off-by: default avatarHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent d6194195
...@@ -2237,7 +2237,7 @@ static int b44_init_one(struct ssb_device *sdev, ...@@ -2237,7 +2237,7 @@ static int b44_init_one(struct ssb_device *sdev,
/* do a phy reset to test if there is an active phy */ /* do a phy reset to test if there is an active phy */
if (b44_phy_reset(bp) < 0) if (b44_phy_reset(bp) < 0)
bp->phy_addr = B44_PHY_ADDR_NO_PHY; bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
netdev_info(dev, "%s %pM\n", DRV_DESCRIPTION, dev->dev_addr); netdev_info(dev, "%s %pM\n", DRV_DESCRIPTION, dev->dev_addr);
......
...@@ -280,9 +280,9 @@ struct ring_info { ...@@ -280,9 +280,9 @@ struct ring_info {
dma_addr_t mapping; dma_addr_t mapping;
}; };
#define B44_MCAST_TABLE_SIZE 32 #define B44_MCAST_TABLE_SIZE 32
#define B44_PHY_ADDR_NO_PHY 30 #define B44_PHY_ADDR_NO_LOCAL_PHY 30 /* no local phy regs */
#define B44_MDC_RATIO 5000000 #define B44_MDC_RATIO 5000000
#define B44_STAT_REG_DECLARE \ #define B44_STAT_REG_DECLARE \
_B44(tx_good_octets) \ _B44(tx_good_octets) \
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment