Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm/imx: fix imx6q mmc error when mounting rootfs
  arm/imx: fix AUTO_ZRELADDR selection
  arm/imx: fix the references to ARCH_MX3
  ARM: mx51/53: set pwm clock parent to ipg_perclk
  arm/tegra: enable headphone detection gpio on seaboard
  arm/dt: Fix ventana SDHCI power-gpios
  arm/tegra: Don't create duplicate gpio and pinmux devices
  ARM: at91: Fix USBA gadget registration
  atmel/spi: fix missing probe
  at91/yl-9200: Fix section mismatch
  at91: vmalloc fix missing AT91_VIRT_BASE define
  ARM: at91: usart: drop static map regs for dbgu
  ARM: picoxcell: add extra temp register to addruart
  ARM: msm: fix compilation flags for MSM_SCM
  arm/mxs: fix mmc device adding for mach-mx28evk
  ARM: mxc: Remove test_for_ltirq
  ARM:i.MX: fix build error in clock-mx51-mx53.c
  ARM:i.MX: fix build error in tzic/avic.c
  ARM: mxc: fix local timer interrupt handling
  msm: boards: Fix fallout from removal of machine_desc in fixup

arch/arm/boot/dts/tegra-ventana.dts

@@ -22,11 +22,10 @@ serial@70006300 {
 	sdhci@c8000400 {
 		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
 		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
-		power-gpios = <&gpio 155 0>; /* gpio PT3 */
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 	};
 
 	sdhci@c8000600 {
-		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 		support-8bit;
 	};
 };

arch/arm/mach-at91/at91cap9_devices.c

@@ -98,7 +98,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB HS Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
 
 static struct resource usba_udc_resources[] = {
 	[0] = {
@@ -1021,8 +1021,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -1035,7 +1035,6 @@ static struct resource dbgu_resources[] = {
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);

arch/arm/mach-at91/at91rm9200_devices.c

@@ -877,8 +877,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -891,7 +891,6 @@ static struct resource dbgu_resources[] = {
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);

arch/arm/mach-at91/at91sam9260_devices.c

@@ -837,8 +837,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -851,7 +851,6 @@ static struct resource dbgu_resources[] = {
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);

arch/arm/mach-at91/at91sam9261_devices.c

@@ -816,8 +816,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -830,7 +830,6 @@ static struct resource dbgu_resources[] = {
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);

arch/arm/mach-at91/at91sam9263_devices.c

@@ -1196,8 +1196,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -1210,7 +1210,6 @@ static struct resource dbgu_resources[] = {
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);

arch/arm/mach-at91/at91sam9g45_devices.c

@@ -197,7 +197,7 @@ void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) {}
  *  USB HS Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
 static struct resource usba_udc_resources[] = {
 	[0] = {
 		.start	= AT91SAM9G45_UDPHS_FIFO,
@@ -1332,8 +1332,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -1346,7 +1346,6 @@ static struct resource dbgu_resources[] = {
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);

arch/arm/mach-at91/at91sam9rl_devices.c

@@ -75,7 +75,7 @@ void __init at91_add_device_hdmac(void) {}
  *  USB HS Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
 
 static struct resource usba_udc_resources[] = {
 	[0] = {
@@ -908,8 +908,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -922,7 +922,6 @@ static struct resource dbgu_resources[] = {
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);

arch/arm/mach-at91/board-yl-9200.c

@@ -384,7 +384,7 @@ static struct spi_board_info yl9200_spi_devices[] = {
 #include <video/s1d13xxxfb.h>
 
 
-static void __init yl9200_init_video(void)
+static void yl9200_init_video(void)
 {
 	/* NWAIT Signal */
 	at91_set_A_periph(AT91_PIN_PC6, 0);

arch/arm/mach-at91/include/mach/vmalloc.h

@@ -21,6 +21,8 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
+#include <mach/hardware.h>
+
 #define VMALLOC_END		(AT91_VIRT_BASE & PGDIR_MASK)
 
 #endif

arch/arm/mach-imx/Makefile.boot

-zreladdr-$(CONFIG_ARCH_MX1)	+= 0x08008000
-params_phys-$(CONFIG_ARCH_MX1)	:= 0x08000100
-initrd_phys-$(CONFIG_ARCH_MX1)	:= 0x08800000
+zreladdr-$(CONFIG_SOC_IMX1)	+= 0x08008000
+params_phys-$(CONFIG_SOC_IMX1)	:= 0x08000100
+initrd_phys-$(CONFIG_SOC_IMX1)	:= 0x08800000
 
-zreladdr-$(CONFIG_MACH_MX21)	+= 0xC0008000
-params_phys-$(CONFIG_MACH_MX21)	:= 0xC0000100
-initrd_phys-$(CONFIG_MACH_MX21)	:= 0xC0800000
+zreladdr-$(CONFIG_SOC_IMX21)	+= 0xC0008000
+params_phys-$(CONFIG_SOC_IMX21)	:= 0xC0000100
+initrd_phys-$(CONFIG_SOC_IMX21)	:= 0xC0800000
 
-zreladdr-$(CONFIG_ARCH_MX25)	+= 0x80008000
-params_phys-$(CONFIG_ARCH_MX25)	:= 0x80000100
-initrd_phys-$(CONFIG_ARCH_MX25)	:= 0x80800000
+zreladdr-$(CONFIG_SOC_IMX25)	+= 0x80008000
+params_phys-$(CONFIG_SOC_IMX25)	:= 0x80000100
+initrd_phys-$(CONFIG_SOC_IMX25)	:= 0x80800000
 
-zreladdr-$(CONFIG_MACH_MX27)	+= 0xA0008000
-params_phys-$(CONFIG_MACH_MX27)	:= 0xA0000100
-initrd_phys-$(CONFIG_MACH_MX27)	:= 0xA0800000
+zreladdr-$(CONFIG_SOC_IMX27)	+= 0xA0008000
+params_phys-$(CONFIG_SOC_IMX27)	:= 0xA0000100
+initrd_phys-$(CONFIG_SOC_IMX27)	:= 0xA0800000
 
-zreladdr-$(CONFIG_ARCH_MX3)	+= 0x80008000
-params_phys-$(CONFIG_ARCH_MX3)	:= 0x80000100
-initrd_phys-$(CONFIG_ARCH_MX3)	:= 0x80800000
+zreladdr-$(CONFIG_SOC_IMX31)	+= 0x80008000
+params_phys-$(CONFIG_SOC_IMX31)	:= 0x80000100
+initrd_phys-$(CONFIG_SOC_IMX31)	:= 0x80800000
+
+zreladdr-$(CONFIG_SOC_IMX35)	+= 0x80008000
+params_phys-$(CONFIG_SOC_IMX35)	:= 0x80000100
+initrd_phys-$(CONFIG_SOC_IMX35)	:= 0x80800000
 
 zreladdr-$(CONFIG_SOC_IMX6Q)	+= 0x10008000
 params_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10000100

arch/arm/mach-imx/clock-imx6q.c

@@ -1139,7 +1139,7 @@ static int _clk_set_rate(struct clk *clk, unsigned long rate)
 		return -EINVAL;
 
 	max_div = ((d->bm_pred >> d->bp_pred) + 1) *
-		  ((d->bm_pred >> d->bp_pred) + 1);
+		  ((d->bm_podf >> d->bp_podf) + 1);
 
 	div = parent_rate / rate;
 	if (div == 0)
@@ -2002,6 +2002,21 @@ int __init mx6q_clocks_init(void)
 	clk_set_rate(&asrc_serial_clk, 1500000);
 	clk_set_rate(&enfc_clk, 11000000);
 
+	/*
+	 * Before pinctrl API is available, we have to rely on the pad
+	 * configuration set up by bootloader.  For usdhc example here,
+	 * u-boot sets up the pads for 49.5 MHz case, and we have to lower
+	 * the usdhc clock from 198 to 49.5 MHz to match the pad configuration.
+	 *
+	 * FIXME: This is should be removed after pinctrl API is available.
+	 * At that time, usdhc driver can call pinctrl API to change pad
+	 * configuration dynamically per different usdhc clock settings.
+	 */
+	clk_set_rate(&usdhc1_clk, 49500000);
+	clk_set_rate(&usdhc2_clk, 49500000);
+	clk_set_rate(&usdhc3_clk, 49500000);
+	clk_set_rate(&usdhc4_clk, 49500000);
+
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);

arch/arm/mach-msm/Makefile

@@ -15,6 +15,8 @@ obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
 obj-$(CONFIG_MSM_SMD) += last_radio_log.o
 obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
 
+CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
+
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
 obj-$(CONFIG_SMP) += headsmp.o platsmp.o
 

arch/arm/mach-msm/board-msm7x30.c

@@ -42,8 +42,8 @@
 
 extern struct sys_timer msm_timer;
 
-static void __init msm7x30_fixup(struct machine_desc *desc, struct tag *tag,
-			 char **cmdline, struct meminfo *mi)
+static void __init msm7x30_fixup(struct tag *tag, char **cmdline,
+		struct meminfo *mi)
 {
 	for (; tag->hdr.size; tag = tag_next(tag))
 		if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {

arch/arm/mach-msm/board-msm8960.c

@@ -32,8 +32,8 @@
 
 #include "devices.h"
 
-static void __init msm8960_fixup(struct machine_desc *desc, struct tag *tag,
-			 char **cmdline, struct meminfo *mi)
+static void __init msm8960_fixup(struct tag *tag, char **cmdline,
+		struct meminfo *mi)
 {
 	for (; tag->hdr.size; tag = tag_next(tag))
 		if (tag->hdr.tag == ATAG_MEM &&

arch/arm/mach-msm/board-msm8x60.c

@@ -28,8 +28,8 @@
 #include <mach/board.h>
 #include <mach/msm_iomap.h>
 
-static void __init msm8x60_fixup(struct machine_desc *desc, struct tag *tag,
-			 char **cmdline, struct meminfo *mi)
+static void __init msm8x60_fixup(struct tag *tag, char **cmdline,
+		struct meminfo *mi)
 {
 	for (; tag->hdr.size; tag = tag_next(tag))
 		if (tag->hdr.tag == ATAG_MEM &&

arch/arm/mach-msm/scm.c

@@ -180,6 +180,9 @@ static u32 smc(u32 cmd_addr)
 			__asmeq("%1", "r0")
 			__asmeq("%2", "r1")
 			__asmeq("%3", "r2")
+#ifdef REQUIRES_SEC
+			".arch_extension sec\n"
+#endif
 			"smc	#0	@ switch to secure world\n"
 			: "=r" (r0)
 			: "r" (r0), "r" (r1), "r" (r2)

arch/arm/mach-mx5/clock-mx51-mx53.c

@@ -1281,9 +1281,9 @@ DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
 	NULL,  NULL, &ipg_clk, &gpt_ipg_clk);
 
 DEFINE_CLOCK(pwm1_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG6_OFFSET,
-	NULL, NULL, &ipg_clk, NULL);
+	NULL, NULL, &ipg_perclk, NULL);
 DEFINE_CLOCK(pwm2_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG8_OFFSET,
-	NULL, NULL, &ipg_clk, NULL);
+	NULL, NULL, &ipg_perclk, NULL);
 
 /* I2C */
 DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET,
@@ -1634,6 +1634,7 @@ int __init mx53_clocks_init(unsigned long ckil, unsigned long osc,
 	return 0;
 }
 
+#ifdef CONFIG_OF
 static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc,
 				   unsigned long *ckih1, unsigned long *ckih2)
 {
@@ -1671,3 +1672,4 @@ int __init mx53_clocks_init_dt(void)
 	clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
 	return mx53_clocks_init(ckil, osc, ckih1, ckih2);
 }
+#endif

arch/arm/mach-mxs/mach-mx28evk.c

@@ -471,6 +471,7 @@ static void __init mx28evk_init(void)
 			       "mmc0-slot-power");
 	if (ret)
 		pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
+	else
 		mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
 
 	ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW,
@@ -480,7 +481,6 @@ static void __init mx28evk_init(void)
 	else
 		mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
 
-	mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
 	mx28_add_rtc_stmp3xxx();
 
 	gpio_led_register_device(0, &mx28evk_led_data);

arch/arm/mach-picoxcell/include/mach/debug-macro.S

@@ -14,7 +14,7 @@
 
 #define UART_SHIFT 2
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		ldr	\rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE)
 		ldr	\rp, =PICOXCELL_UART1_BASE
 		.endm

arch/arm/mach-tegra/board-dt.c

@@ -101,6 +101,13 @@ static void __init tegra_dt_init(void)
 
 	tegra_clk_init_from_table(tegra_dt_clk_init_table);
 
+	/*
+	 * Finished with the static registrations now; fill in the missing
+	 * devices
+	 */
+	of_platform_populate(NULL, tegra_dt_match_table,
+				tegra20_auxdata_lookup, NULL);
+
 	for (i = 0; i < ARRAY_SIZE(pinmux_configs); i++) {
 		if (of_machine_is_compatible(pinmux_configs[i].machine)) {
 			pinmux_configs[i].init();
@@ -110,12 +117,6 @@ static void __init tegra_dt_init(void)
 
 	WARN(i == ARRAY_SIZE(pinmux_configs),
 		"Unknown platform! Pinmuxing not initialized\n");
-
-	/*
-	 * Finished with the static registrations now; fill in the missing
-	 * devices
-	 */
-	of_platform_populate(NULL, tegra_dt_match_table, tegra20_auxdata_lookup, NULL);
 }
 
 static const char * tegra_dt_board_compat[] = {

arch/arm/mach-tegra/board-harmony-pinmux.c

@@ -16,6 +16,8 @@
 
 #include <linux/kernel.h>
 #include <linux/gpio.h>
+#include <linux/of.h>
+
 #include <mach/pinmux.h>
 
 #include "gpio-names.h"
@@ -161,7 +163,9 @@ static struct tegra_gpio_table gpio_table[] = {
 
 void harmony_pinmux_init(void)
 {
-	platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+	if (!of_machine_is_compatible("nvidia,tegra20"))
+		platform_add_devices(pinmux_devices,
+					ARRAY_SIZE(pinmux_devices));
 
 	tegra_pinmux_config_table(harmony_pinmux, ARRAY_SIZE(harmony_pinmux));
 

arch/arm/mach-tegra/board-paz00-pinmux.c

@@ -16,6 +16,8 @@
 
 #include <linux/kernel.h>
 #include <linux/gpio.h>
+#include <linux/of.h>
+
 #include <mach/pinmux.h>
 
 #include "gpio-names.h"
@@ -158,7 +160,9 @@ static struct tegra_gpio_table gpio_table[] = {
 
 void paz00_pinmux_init(void)
 {
-	platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+	if (!of_machine_is_compatible("nvidia,tegra20"))
+		platform_add_devices(pinmux_devices,
+					ARRAY_SIZE(pinmux_devices));
 
 	tegra_pinmux_config_table(paz00_pinmux, ARRAY_SIZE(paz00_pinmux));
 

arch/arm/mach-tegra/board-seaboard-pinmux.c

@@ -16,6 +16,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/of.h>
 
 #include <mach/pinmux.h>
 #include <mach/pinmux-t2.h>
@@ -191,6 +192,7 @@ static struct tegra_gpio_table common_gpio_table[] = {
 	{ .gpio = TEGRA_GPIO_SD2_POWER,		.enable = true },
 	{ .gpio = TEGRA_GPIO_LIDSWITCH,		.enable = true },
 	{ .gpio = TEGRA_GPIO_POWERKEY,		.enable = true },
+	{ .gpio = TEGRA_GPIO_HP_DET,		.enable = true },
 	{ .gpio = TEGRA_GPIO_ISL29018_IRQ,	.enable = true },
 	{ .gpio = TEGRA_GPIO_CDC_IRQ,		.enable = true },
 	{ .gpio = TEGRA_GPIO_USB1,		.enable = true },
@@ -218,7 +220,9 @@ static void __init update_pinmux(struct tegra_pingroup_config *newtbl, int size)
 
 void __init seaboard_common_pinmux_init(void)
 {
-	platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+	if (!of_machine_is_compatible("nvidia,tegra20"))
+		platform_add_devices(pinmux_devices,
+					ARRAY_SIZE(pinmux_devices));
 
 	tegra_pinmux_config_table(seaboard_pinmux, ARRAY_SIZE(seaboard_pinmux));
 

arch/arm/mach-tegra/board-trimslice-pinmux.c

@@ -16,6 +16,7 @@
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/of.h>
 
 #include <mach/pinmux.h>
 
@@ -157,7 +158,9 @@ static struct tegra_gpio_table gpio_table[] = {
 
 void __init trimslice_pinmux_init(void)
 {
-	platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+	if (!of_machine_is_compatible("nvidia,tegra20"))
+		platform_add_devices(pinmux_devices,
+					ARRAY_SIZE(pinmux_devices));
 	tegra_pinmux_config_table(trimslice_pinmux, ARRAY_SIZE(trimslice_pinmux));
 	tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
 }

arch/arm/plat-mxc/Kconfig

@@ -10,7 +10,7 @@ choice
 
 config ARCH_IMX_V4_V5
 	bool "i.MX1, i.MX21, i.MX25, i.MX27"
-	select AUTO_ZRELADDR
+	select AUTO_ZRELADDR if !ZBOOT_ROM
 	select ARM_PATCH_PHYS_VIRT
 	help
 	  This enables support for systems based on the Freescale i.MX ARMv4
@@ -26,7 +26,7 @@ config ARCH_IMX_V6_V7
 
 config ARCH_MX5
 	bool "i.MX50, i.MX51, i.MX53"
-	select AUTO_ZRELADDR
+	select AUTO_ZRELADDR if !ZBOOT_ROM
 	select ARM_PATCH_PHYS_VIRT
 	help
 	  This enables support for machines using Freescale's i.MX50 and i.MX53

arch/arm/plat-mxc/avic.c

@@ -22,6 +22,7 @@
 #include <linux/io.h>
 #include <mach/common.h>
 #include <asm/mach/irq.h>
+#include <asm/exception.h>
 #include <mach/hardware.h>
 
 #include "irq-common.h"

arch/arm/plat-mxc/gic.c

@@ -28,21 +28,14 @@ asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
 		if (irqnr == 1023)
 			break;
 
-		if (irqnr > 29 && irqnr < 1021)
+		if (irqnr > 15 && irqnr < 1021)
 			handle_IRQ(irqnr, regs);
 #ifdef CONFIG_SMP
-		else if (irqnr < 16) {
+		else {
 			writel_relaxed(irqstat, gic_cpu_base_addr +
 						GIC_CPU_EOI);
 			handle_IPI(irqnr, regs);
 		}
-#endif
-#ifdef CONFIG_LOCAL_TIMERS
-		else if (irqnr == 29) {
-			writel_relaxed(irqstat, gic_cpu_base_addr +
-						GIC_CPU_EOI);
-			handle_local_timer(regs);
-		}
 #endif
 	} while (1);
 }

arch/arm/plat-mxc/include/mach/entry-macro.S

@@ -25,6 +25,3 @@
 
 	.macro test_for_ipi, irqnr, irqstat, base, tmp
 	.endm
-
-	.macro test_for_ltirq, irqnr, irqstat, base, tmp
-	.endm

arch/arm/plat-mxc/tzic.c

@@ -17,6 +17,7 @@
 #include <linux/io.h>
 
 #include <asm/mach/irq.h>
+#include <asm/exception.h>
 
 #include <mach/hardware.h>
 #include <mach/common.h>

drivers/mmc/host/sdhci-esdhc-imx.c

@@ -32,6 +32,7 @@
 /* VENDOR SPEC register */
 #define SDHCI_VENDOR_SPEC		0xC0
 #define  SDHCI_VENDOR_SPEC_SDIO_QUIRK	0x00000002
+#define SDHCI_WTMK_LVL			0x44
 #define SDHCI_MIX_CTRL			0x48
 
 /*
@@ -476,6 +477,13 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev)
 	if (is_imx53_esdhc(imx_data))
 		imx_data->flags |= ESDHC_FLAG_MULTIBLK_NO_INT;
 
+	/*
+	 * The imx6q ROM code will change the default watermark level setting
+	 * to something insane.  Change it back here.
+	 */
+	if (is_imx6q_usdhc(imx_data))
+		writel(0x08100810, host->ioaddr + SDHCI_WTMK_LVL);
+
 	boarddata = &imx_data->boarddata;
 	if (sdhci_esdhc_imx_probe_dt(pdev, boarddata) < 0) {
 		if (!host->mmc->parent->platform_data) {

drivers/spi/spi-atmel.c

@@ -907,7 +907,7 @@ static void atmel_spi_cleanup(struct spi_device *spi)
 
 /*-------------------------------------------------------------------------*/
 
-static int __init atmel_spi_probe(struct platform_device *pdev)
+static int __devinit atmel_spi_probe(struct platform_device *pdev)
 {
 	struct resource		*regs;
 	int			irq;
@@ -1003,7 +1003,7 @@ static int __init atmel_spi_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int __exit atmel_spi_remove(struct platform_device *pdev)
+static int __devexit atmel_spi_remove(struct platform_device *pdev)
 {
 	struct spi_master	*master = platform_get_drvdata(pdev);
 	struct atmel_spi	*as = spi_master_get_devdata(master);
@@ -1072,6 +1072,7 @@ static struct platform_driver atmel_spi_driver = {
 	},
 	.suspend	= atmel_spi_suspend,
 	.resume		= atmel_spi_resume,
+	.probe		= atmel_spi_probe,
 	.remove		= __exit_p(atmel_spi_remove),
 };
 module_platform_driver(atmel_spi_driver);