ARM: s3c24xx: drop s3c-camif setup platform code

The s3c-camif driver setup platform code does not have any users so it
can be safely removed.

Along with the code W=1 compile warnings go away:

    arch/arm/mach-s3c24xx/setup-camif.c:28:5: warning: no previous prototype for 's3c_camif_gpio_get' [-Wmissing-prototypes]
    arch/arm/mach-s3c24xx/setup-camif.c:56:6: warning: no previous prototype for 's3c_camif_gpio_put' [-Wmissing-prototypes]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

arch/arm/mach-s3c24xx/Kconfig

@@ -123,11 +123,6 @@ config S3C24XX_PLL
 	  This also means that the PLL tables for the selected CPU(s) will
 	  be built which may increase the size of the kernel image.
 
-config S3C_SETUP_CAMIF
-	bool
-	help
-	  Compile in common setup code for S3C CAMIF devices
-
 # cpu frequency items common between s3c2410 and s3c2440/s3c2442
 
 config S3C2410_IOTIMING
@@ -468,7 +463,6 @@ config MACH_MINI2440
 	select NEW_LEDS
 	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST
-	select S3C_SETUP_CAMIF
 	help
 	  Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
 	  available via various sources. It can come with a 3.5" or 7" touch LCD.

arch/arm/mach-s3c24xx/Makefile

@@ -97,4 +97,3 @@ obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
 obj-$(CONFIG_S3C2443_SETUP_SPI)		+= setup-spi.o
 obj-$(CONFIG_ARCH_S3C24XX)		+= setup-i2c.o
 obj-$(CONFIG_S3C24XX_SETUP_TS)		+= setup-ts.o
-obj-$(CONFIG_S3C_SETUP_CAMIF)		+= setup-camif.o

arch/arm/mach-s3c24xx/setup-camif.c

-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2012 Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
-//
-// Helper functions for S3C24XX/S3C64XX SoC series CAMIF driver
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
-
-/* Number of camera port pins, without FIELD */
-#define S3C_CAMIF_NUM_GPIOS	13
-
-/* Default camera port configuration helpers. */
-
-static void camif_get_gpios(int *gpio_start, int *gpio_reset)
-{
-#ifdef CONFIG_ARCH_S3C24XX
-	*gpio_start = S3C2410_GPJ(0);
-	*gpio_reset = S3C2410_GPJ(12);
-#else
-	/* s3c64xx */
-	*gpio_start = S3C64XX_GPF(0);
-	*gpio_reset = S3C64XX_GPF(3);
-#endif
-}
-
-int s3c_camif_gpio_get(void)
-{
-	int gpio_start, gpio_reset;
-	int ret, i;
-
-	camif_get_gpios(&gpio_start, &gpio_reset);
-
-	for (i = 0; i < S3C_CAMIF_NUM_GPIOS; i++) {
-		int gpio = gpio_start + i;
-
-		if (gpio == gpio_reset)
-			continue;
-
-		ret = gpio_request(gpio, "camif");
-		if (!ret)
-			ret = s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		if (ret) {
-			pr_err("failed to configure GPIO %d\n", gpio);
-			for (--i; i >= 0; i--)
-				gpio_free(gpio--);
-			return ret;
-		}
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	return 0;
-}
-
-void s3c_camif_gpio_put(void)
-{
-	int i, gpio_start, gpio_reset;
-
-	camif_get_gpios(&gpio_start, &gpio_reset);
-
-	for (i = 0; i < S3C_CAMIF_NUM_GPIOS; i++) {
-		int gpio = gpio_start + i;
-		if (gpio != gpio_reset)
-			gpio_free(gpio);
-	}
-}

include/media/drv-intf/s3c_camif.h

@@ -35,8 +35,4 @@ struct s3c_camif_plat_data {
 	int (*gpio_put)(void);
 };
 
-/* Platform default helper functions */
-int s3c_camif_gpio_get(void);
-int s3c_camif_gpio_put(void);
-
 #endif /* MEDIA_S3C_CAMIF_ */