Commit 5d48421b authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Add INGORE_ERRORS to ignore warnings in boot up
  ktest: Still do reboot even for REBOOT_TYPE = script
  ktest: Fix compare script to test if options are not documented
  ktest: Detect typos in option names
  ktest: Have all values be set by defaults
  ktest: Change initialization of defaults hash to perl format
  ktest: Add options SWITCH_TO_GOOD and SWITCH_TO_TEST
  ktest: Allow overriding bisect test results
  ktest: Evaluate options before processing them
  ktest: Evaluate $KERNEL_VERSION in both install and post install
  ktest: Only ask options needed for install
  ktest: When creating a new config, ask for BUILD_OPTIONS
  ktest: Do not ask for some options if the only test is build
  ktest: Ask for type of test when creating a new config
  ktest: Allow bisect test to restart where it left off
  ktest: When creating new config, allow the use of ${THIS_DIR}
  ktest: Add default for ssh-user, build-target and target-image
  ktest: Allow success logs to be stored
  ktest: Save test output
parents 6e03db2b be405f95
...@@ -2,7 +2,9 @@ ...@@ -2,7 +2,9 @@
open (IN,"ktest.pl"); open (IN,"ktest.pl");
while (<IN>) { while (<IN>) {
# hashes are now used
if (/\$opt\{"?([A-Z].*?)(\[.*\])?"?\}/ || if (/\$opt\{"?([A-Z].*?)(\[.*\])?"?\}/ ||
/^\s*"?([A-Z].*?)"?\s*=>\s*/ ||
/set_test_option\("(.*?)"/) { /set_test_option\("(.*?)"/) {
$opt{$1} = 1; $opt{$1} = 1;
} }
...@@ -11,7 +13,7 @@ close IN; ...@@ -11,7 +13,7 @@ close IN;
open (IN, "sample.conf"); open (IN, "sample.conf");
while (<IN>) { while (<IN>) {
if (/^\s*#?\s*(\S+)\s*=/) { if (/^\s*#?\s*([A-Z]\S*)\s*=/) {
$samp{$1} = 1; $samp{$1} = 1;
} }
} }
......
...@@ -18,40 +18,50 @@ $| = 1; ...@@ -18,40 +18,50 @@ $| = 1;
my %opt; my %opt;
my %repeat_tests; my %repeat_tests;
my %repeats; my %repeats;
my %default;
#default opts #default opts
$default{"NUM_TESTS"} = 1; my %default = (
$default{"REBOOT_TYPE"} = "grub"; "NUM_TESTS" => 1,
$default{"TEST_TYPE"} = "test"; "TEST_TYPE" => "build",
$default{"BUILD_TYPE"} = "randconfig"; "BUILD_TYPE" => "randconfig",
$default{"MAKE_CMD"} = "make"; "MAKE_CMD" => "make",
$default{"TIMEOUT"} = 120; "TIMEOUT" => 120,
$default{"TMP_DIR"} = "/tmp/ktest/\${MACHINE}"; "TMP_DIR" => "/tmp/ktest/\${MACHINE}",
$default{"SLEEP_TIME"} = 60; # sleep time between tests "SLEEP_TIME" => 60, # sleep time between tests
$default{"BUILD_NOCLEAN"} = 0; "BUILD_NOCLEAN" => 0,
$default{"REBOOT_ON_ERROR"} = 0; "REBOOT_ON_ERROR" => 0,
$default{"POWEROFF_ON_ERROR"} = 0; "POWEROFF_ON_ERROR" => 0,
$default{"REBOOT_ON_SUCCESS"} = 1; "REBOOT_ON_SUCCESS" => 1,
$default{"POWEROFF_ON_SUCCESS"} = 0; "POWEROFF_ON_SUCCESS" => 0,
$default{"BUILD_OPTIONS"} = ""; "BUILD_OPTIONS" => "",
$default{"BISECT_SLEEP_TIME"} = 60; # sleep time between bisects "BISECT_SLEEP_TIME" => 60, # sleep time between bisects
$default{"PATCHCHECK_SLEEP_TIME"} = 60; # sleep time between patch checks "PATCHCHECK_SLEEP_TIME" => 60, # sleep time between patch checks
$default{"CLEAR_LOG"} = 0; "CLEAR_LOG" => 0,
$default{"BISECT_MANUAL"} = 0; "BISECT_MANUAL" => 0,
$default{"BISECT_SKIP"} = 1; "BISECT_SKIP" => 1,
$default{"SUCCESS_LINE"} = "login:"; "SUCCESS_LINE" => "login:",
$default{"DETECT_TRIPLE_FAULT"} = 1; "DETECT_TRIPLE_FAULT" => 1,
$default{"NO_INSTALL"} = 0; "NO_INSTALL" => 0,
$default{"BOOTED_TIMEOUT"} = 1; "BOOTED_TIMEOUT" => 1,
$default{"DIE_ON_FAILURE"} = 1; "DIE_ON_FAILURE" => 1,
$default{"SSH_EXEC"} = "ssh \$SSH_USER\@\$MACHINE \$SSH_COMMAND"; "SSH_EXEC" => "ssh \$SSH_USER\@\$MACHINE \$SSH_COMMAND",
$default{"SCP_TO_TARGET"} = "scp \$SRC_FILE \$SSH_USER\@\$MACHINE:\$DST_FILE"; "SCP_TO_TARGET" => "scp \$SRC_FILE \$SSH_USER\@\$MACHINE:\$DST_FILE",
$default{"REBOOT"} = "ssh \$SSH_USER\@\$MACHINE reboot"; "REBOOT" => "ssh \$SSH_USER\@\$MACHINE reboot",
$default{"STOP_AFTER_SUCCESS"} = 10; "STOP_AFTER_SUCCESS" => 10,
$default{"STOP_AFTER_FAILURE"} = 60; "STOP_AFTER_FAILURE" => 60,
$default{"STOP_TEST_AFTER"} = 600; "STOP_TEST_AFTER" => 600,
$default{"LOCALVERSION"} = "-test";
# required, and we will ask users if they don't have them but we keep the default
# value something that is common.
"REBOOT_TYPE" => "grub",
"LOCALVERSION" => "-test",
"SSH_USER" => "root",
"BUILD_TARGET" => "arch/x86/boot/bzImage",
"TARGET_IMAGE" => "/boot/vmlinuz-test",
"LOG_FILE" => undef,
"IGNORE_UNUSED" => 0,
);
my $ktest_config; my $ktest_config;
my $version; my $version;
...@@ -73,6 +83,8 @@ my $reboot_script; ...@@ -73,6 +83,8 @@ my $reboot_script;
my $power_cycle; my $power_cycle;
my $reboot; my $reboot;
my $reboot_on_error; my $reboot_on_error;
my $switch_to_good;
my $switch_to_test;
my $poweroff_on_error; my $poweroff_on_error;
my $die_on_failure; my $die_on_failure;
my $powercycle_after_reboot; my $powercycle_after_reboot;
...@@ -92,17 +104,24 @@ my $start_minconfig; ...@@ -92,17 +104,24 @@ my $start_minconfig;
my $start_minconfig_defined; my $start_minconfig_defined;
my $output_minconfig; my $output_minconfig;
my $ignore_config; my $ignore_config;
my $ignore_errors;
my $addconfig; my $addconfig;
my $in_bisect = 0; my $in_bisect = 0;
my $bisect_bad = ""; my $bisect_bad_commit = "";
my $reverse_bisect; my $reverse_bisect;
my $bisect_manual; my $bisect_manual;
my $bisect_skip; my $bisect_skip;
my $config_bisect_good; my $config_bisect_good;
my $bisect_ret_good;
my $bisect_ret_bad;
my $bisect_ret_skip;
my $bisect_ret_abort;
my $bisect_ret_default;
my $in_patchcheck = 0; my $in_patchcheck = 0;
my $run_test; my $run_test;
my $redirect; my $redirect;
my $buildlog; my $buildlog;
my $testlog;
my $dmesg; my $dmesg;
my $monitor_fp; my $monitor_fp;
my $monitor_pid; my $monitor_pid;
...@@ -112,6 +131,7 @@ my $bisect_sleep_time; ...@@ -112,6 +131,7 @@ my $bisect_sleep_time;
my $patchcheck_sleep_time; my $patchcheck_sleep_time;
my $ignore_warnings; my $ignore_warnings;
my $store_failures; my $store_failures;
my $store_successes;
my $test_name; my $test_name;
my $timeout; my $timeout;
my $booted_timeout; my $booted_timeout;
...@@ -124,10 +144,34 @@ my $stop_after_failure; ...@@ -124,10 +144,34 @@ my $stop_after_failure;
my $stop_test_after; my $stop_test_after;
my $build_target; my $build_target;
my $target_image; my $target_image;
my $checkout;
my $localversion; my $localversion;
my $iteration = 0; my $iteration = 0;
my $successes = 0; my $successes = 0;
my $bisect_good;
my $bisect_bad;
my $bisect_type;
my $bisect_start;
my $bisect_replay;
my $bisect_files;
my $bisect_reverse;
my $bisect_check;
my $config_bisect;
my $config_bisect_type;
my $patchcheck_type;
my $patchcheck_start;
my $patchcheck_end;
# set when a test is something other that just building or install
# which would require more options.
my $buildonly = 1;
# set when creating a new config
my $newconfig = 0;
my %entered_configs; my %entered_configs;
my %config_help; my %config_help;
my %variable; my %variable;
...@@ -136,11 +180,99 @@ my %force_config; ...@@ -136,11 +180,99 @@ my %force_config;
# do not force reboots on config problems # do not force reboots on config problems
my $no_reboot = 1; my $no_reboot = 1;
my %option_map = (
"MACHINE" => \$machine,
"SSH_USER" => \$ssh_user,
"TMP_DIR" => \$tmpdir,
"OUTPUT_DIR" => \$outputdir,
"BUILD_DIR" => \$builddir,
"TEST_TYPE" => \$test_type,
"BUILD_TYPE" => \$build_type,
"BUILD_OPTIONS" => \$build_options,
"PRE_BUILD" => \$pre_build,
"POST_BUILD" => \$post_build,
"PRE_BUILD_DIE" => \$pre_build_die,
"POST_BUILD_DIE" => \$post_build_die,
"POWER_CYCLE" => \$power_cycle,
"REBOOT" => \$reboot,
"BUILD_NOCLEAN" => \$noclean,
"MIN_CONFIG" => \$minconfig,
"OUTPUT_MIN_CONFIG" => \$output_minconfig,
"START_MIN_CONFIG" => \$start_minconfig,
"IGNORE_CONFIG" => \$ignore_config,
"TEST" => \$run_test,
"ADD_CONFIG" => \$addconfig,
"REBOOT_TYPE" => \$reboot_type,
"GRUB_MENU" => \$grub_menu,
"POST_INSTALL" => \$post_install,
"NO_INSTALL" => \$no_install,
"REBOOT_SCRIPT" => \$reboot_script,
"REBOOT_ON_ERROR" => \$reboot_on_error,
"SWITCH_TO_GOOD" => \$switch_to_good,
"SWITCH_TO_TEST" => \$switch_to_test,
"POWEROFF_ON_ERROR" => \$poweroff_on_error,
"DIE_ON_FAILURE" => \$die_on_failure,
"POWER_OFF" => \$power_off,
"POWERCYCLE_AFTER_REBOOT" => \$powercycle_after_reboot,
"POWEROFF_AFTER_HALT" => \$poweroff_after_halt,
"SLEEP_TIME" => \$sleep_time,
"BISECT_SLEEP_TIME" => \$bisect_sleep_time,
"PATCHCHECK_SLEEP_TIME" => \$patchcheck_sleep_time,
"IGNORE_WARNINGS" => \$ignore_warnings,
"IGNORE_ERRORS" => \$ignore_errors,
"BISECT_MANUAL" => \$bisect_manual,
"BISECT_SKIP" => \$bisect_skip,
"CONFIG_BISECT_GOOD" => \$config_bisect_good,
"BISECT_RET_GOOD" => \$bisect_ret_good,
"BISECT_RET_BAD" => \$bisect_ret_bad,
"BISECT_RET_SKIP" => \$bisect_ret_skip,
"BISECT_RET_ABORT" => \$bisect_ret_abort,
"BISECT_RET_DEFAULT" => \$bisect_ret_default,
"STORE_FAILURES" => \$store_failures,
"STORE_SUCCESSES" => \$store_successes,
"TEST_NAME" => \$test_name,
"TIMEOUT" => \$timeout,
"BOOTED_TIMEOUT" => \$booted_timeout,
"CONSOLE" => \$console,
"DETECT_TRIPLE_FAULT" => \$detect_triplefault,
"SUCCESS_LINE" => \$success_line,
"REBOOT_SUCCESS_LINE" => \$reboot_success_line,
"STOP_AFTER_SUCCESS" => \$stop_after_success,
"STOP_AFTER_FAILURE" => \$stop_after_failure,
"STOP_TEST_AFTER" => \$stop_test_after,
"BUILD_TARGET" => \$build_target,
"SSH_EXEC" => \$ssh_exec,
"SCP_TO_TARGET" => \$scp_to_target,
"CHECKOUT" => \$checkout,
"TARGET_IMAGE" => \$target_image,
"LOCALVERSION" => \$localversion,
"BISECT_GOOD" => \$bisect_good,
"BISECT_BAD" => \$bisect_bad,
"BISECT_TYPE" => \$bisect_type,
"BISECT_START" => \$bisect_start,
"BISECT_REPLAY" => \$bisect_replay,
"BISECT_FILES" => \$bisect_files,
"BISECT_REVERSE" => \$bisect_reverse,
"BISECT_CHECK" => \$bisect_check,
"CONFIG_BISECT" => \$config_bisect,
"CONFIG_BISECT_TYPE" => \$config_bisect_type,
"PATCHCHECK_TYPE" => \$patchcheck_type,
"PATCHCHECK_START" => \$patchcheck_start,
"PATCHCHECK_END" => \$patchcheck_end,
);
# Options may be used by other options, record them.
my %used_options;
# default variables that can be used # default variables that can be used
chomp ($variable{"PWD"} = `pwd`); chomp ($variable{"PWD"} = `pwd`);
$config_help{"MACHINE"} = << "EOF" $config_help{"MACHINE"} = << "EOF"
The machine hostname that you will test. The machine hostname that you will test.
For build only tests, it is still needed to differentiate log files.
EOF EOF
; ;
$config_help{"SSH_USER"} = << "EOF" $config_help{"SSH_USER"} = << "EOF"
...@@ -150,11 +282,15 @@ EOF ...@@ -150,11 +282,15 @@ EOF
; ;
$config_help{"BUILD_DIR"} = << "EOF" $config_help{"BUILD_DIR"} = << "EOF"
The directory that contains the Linux source code (full path). The directory that contains the Linux source code (full path).
You can use \${PWD} that will be the path where ktest.pl is run, or use
\${THIS_DIR} which is assigned \${PWD} but may be changed later.
EOF EOF
; ;
$config_help{"OUTPUT_DIR"} = << "EOF" $config_help{"OUTPUT_DIR"} = << "EOF"
The directory that the objects will be built (full path). The directory that the objects will be built (full path).
(can not be same as BUILD_DIR) (can not be same as BUILD_DIR)
You can use \${PWD} that will be the path where ktest.pl is run, or use
\${THIS_DIR} which is assigned \${PWD} but may be changed later.
EOF EOF
; ;
$config_help{"BUILD_TARGET"} = << "EOF" $config_help{"BUILD_TARGET"} = << "EOF"
...@@ -162,6 +298,11 @@ $config_help{"BUILD_TARGET"} = << "EOF" ...@@ -162,6 +298,11 @@ $config_help{"BUILD_TARGET"} = << "EOF"
(relative to OUTPUT_DIR) (relative to OUTPUT_DIR)
EOF EOF
; ;
$config_help{"BUILD_OPTIONS"} = << "EOF"
Options to add to \"make\" when building.
i.e. -j20
EOF
;
$config_help{"TARGET_IMAGE"} = << "EOF" $config_help{"TARGET_IMAGE"} = << "EOF"
The place to put your image on the test machine. The place to put your image on the test machine.
EOF EOF
...@@ -227,20 +368,36 @@ $config_help{"REBOOT_SCRIPT"} = << "EOF" ...@@ -227,20 +368,36 @@ $config_help{"REBOOT_SCRIPT"} = << "EOF"
EOF EOF
; ;
sub read_yn { sub read_prompt {
my ($prompt) = @_; my ($cancel, $prompt) = @_;
my $ans; my $ans;
for (;;) { for (;;) {
print "$prompt [Y/n] "; if ($cancel) {
print "$prompt [y/n/C] ";
} else {
print "$prompt [Y/n] ";
}
$ans = <STDIN>; $ans = <STDIN>;
chomp $ans; chomp $ans;
if ($ans =~ /^\s*$/) { if ($ans =~ /^\s*$/) {
$ans = "y"; if ($cancel) {
$ans = "c";
} else {
$ans = "y";
}
} }
last if ($ans =~ /^y$/i || $ans =~ /^n$/i); last if ($ans =~ /^y$/i || $ans =~ /^n$/i);
print "Please answer either 'y' or 'n'.\n"; if ($cancel) {
last if ($ans =~ /^c$/i);
print "Please answer either 'y', 'n' or 'c'.\n";
} else {
print "Please answer either 'y' or 'n'.\n";
}
}
if ($ans =~ /^c/i) {
exit;
} }
if ($ans !~ /^y$/i) { if ($ans !~ /^y$/i) {
return 0; return 0;
...@@ -248,6 +405,18 @@ sub read_yn { ...@@ -248,6 +405,18 @@ sub read_yn {
return 1; return 1;
} }
sub read_yn {
my ($prompt) = @_;
return read_prompt 0, $prompt;
}
sub read_ync {
my ($prompt) = @_;
return read_prompt 1, $prompt;
}
sub get_ktest_config { sub get_ktest_config {
my ($config) = @_; my ($config) = @_;
my $ans; my $ans;
...@@ -261,7 +430,7 @@ sub get_ktest_config { ...@@ -261,7 +430,7 @@ sub get_ktest_config {
for (;;) { for (;;) {
print "$config = "; print "$config = ";
if (defined($default{$config})) { if (defined($default{$config}) && length($default{$config})) {
print "\[$default{$config}\] "; print "\[$default{$config}\] ";
} }
$ans = <STDIN>; $ans = <STDIN>;
...@@ -274,22 +443,37 @@ sub get_ktest_config { ...@@ -274,22 +443,37 @@ sub get_ktest_config {
next; next;
} }
} }
$entered_configs{$config} = process_variables($ans); $entered_configs{$config} = ${ans};
last; last;
} }
} }
sub get_ktest_configs { sub get_ktest_configs {
get_ktest_config("MACHINE"); get_ktest_config("MACHINE");
get_ktest_config("SSH_USER");
get_ktest_config("BUILD_DIR"); get_ktest_config("BUILD_DIR");
get_ktest_config("OUTPUT_DIR"); get_ktest_config("OUTPUT_DIR");
get_ktest_config("BUILD_TARGET");
get_ktest_config("TARGET_IMAGE"); if ($newconfig) {
get_ktest_config("POWER_CYCLE"); get_ktest_config("BUILD_OPTIONS");
get_ktest_config("CONSOLE"); }
# options required for other than just building a kernel
if (!$buildonly) {
get_ktest_config("POWER_CYCLE");
get_ktest_config("CONSOLE");
}
# options required for install and more
if ($buildonly != 1) {
get_ktest_config("SSH_USER");
get_ktest_config("BUILD_TARGET");
get_ktest_config("TARGET_IMAGE");
}
get_ktest_config("LOCALVERSION"); get_ktest_config("LOCALVERSION");
return if ($buildonly);
my $rtype = $opt{"REBOOT_TYPE"}; my $rtype = $opt{"REBOOT_TYPE"};
if (!defined($rtype)) { if (!defined($rtype)) {
...@@ -303,8 +487,6 @@ sub get_ktest_configs { ...@@ -303,8 +487,6 @@ sub get_ktest_configs {
if ($rtype eq "grub") { if ($rtype eq "grub") {
get_ktest_config("GRUB_MENU"); get_ktest_config("GRUB_MENU");
} else {
get_ktest_config("REBOOT_SCRIPT");
} }
} }
...@@ -334,6 +516,10 @@ sub process_variables { ...@@ -334,6 +516,10 @@ sub process_variables {
} else { } else {
# put back the origin piece. # put back the origin piece.
$retval = "$retval\$\{$var\}"; $retval = "$retval\$\{$var\}";
# This could be an option that is used later, save
# it so we don't warn if this option is not one of
# ktests options.
$used_options{$var} = 1;
} }
$value = $end; $value = $end;
} }
...@@ -348,6 +534,19 @@ sub process_variables { ...@@ -348,6 +534,19 @@ sub process_variables {
sub set_value { sub set_value {
my ($lvalue, $rvalue, $override, $overrides, $name) = @_; my ($lvalue, $rvalue, $override, $overrides, $name) = @_;
my $prvalue = process_variables($rvalue);
if ($buildonly && $lvalue =~ /^TEST_TYPE(\[.*\])?$/ && $prvalue ne "build") {
# Note if a test is something other than build, then we
# will need other manditory options.
if ($prvalue ne "install") {
$buildonly = 0;
} else {
# install still limits some manditory options.
$buildonly = 2;
}
}
if (defined($opt{$lvalue})) { if (defined($opt{$lvalue})) {
if (!$override || defined(${$overrides}{$lvalue})) { if (!$override || defined(${$overrides}{$lvalue})) {
my $extra = ""; my $extra = "";
...@@ -356,13 +555,12 @@ sub set_value { ...@@ -356,13 +555,12 @@ sub set_value {
} }
die "$name: $.: Option $lvalue defined more than once!\n$extra"; die "$name: $.: Option $lvalue defined more than once!\n$extra";
} }
${$overrides}{$lvalue} = $rvalue; ${$overrides}{$lvalue} = $prvalue;
} }
if ($rvalue =~ /^\s*$/) { if ($rvalue =~ /^\s*$/) {
delete $opt{$lvalue}; delete $opt{$lvalue};
} else { } else {
$rvalue = process_variables($rvalue); $opt{$lvalue} = $prvalue;
$opt{$lvalue} = $rvalue;
} }
} }
...@@ -712,6 +910,15 @@ sub __read_config { ...@@ -712,6 +910,15 @@ sub __read_config {
return $test_case; return $test_case;
} }
sub get_test_case {
print "What test case would you like to run?\n";
print " (build, install or boot)\n";
print " Other tests are available but require editing the config file\n";
my $ans = <STDIN>;
chomp $ans;
$default{"TEST_TYPE"} = $ans;
}
sub read_config { sub read_config {
my ($config) = @_; my ($config) = @_;
...@@ -726,10 +933,7 @@ sub read_config { ...@@ -726,10 +933,7 @@ sub read_config {
# was a test specified? # was a test specified?
if (!$test_case) { if (!$test_case) {
print "No test case specified.\n"; print "No test case specified.\n";
print "What test case would you like to run?\n"; get_test_case;
my $ans = <STDIN>;
chomp $ans;
$default{"TEST_TYPE"} = $ans;
} }
# set any defaults # set any defaults
...@@ -739,6 +943,37 @@ sub read_config { ...@@ -739,6 +943,37 @@ sub read_config {
$opt{$default} = $default{$default}; $opt{$default} = $default{$default};
} }
} }
if ($opt{"IGNORE_UNUSED"} == 1) {
return;
}
my %not_used;
# check if there are any stragglers (typos?)
foreach my $option (keys %opt) {
my $op = $option;
# remove per test labels.
$op =~ s/\[.*\]//;
if (!exists($option_map{$op}) &&
!exists($default{$op}) &&
!exists($used_options{$op})) {
$not_used{$op} = 1;
}
}
if (%not_used) {
my $s = "s are";
$s = " is" if (keys %not_used == 1);
print "The following option$s not used; could be a typo:\n";
foreach my $option (keys %not_used) {
print "$option\n";
}
print "Set IGRNORE_UNUSED = 1 to have ktest ignore unused variables\n";
if (!read_yn "Do you want to continue?") {
exit -1;
}
}
} }
sub __eval_option { sub __eval_option {
...@@ -873,6 +1108,17 @@ sub reboot { ...@@ -873,6 +1108,17 @@ sub reboot {
} }
} }
sub reboot_to_good {
my ($time) = @_;
if (defined($switch_to_good)) {
run_command $switch_to_good;
return;
}
reboot $time;
}
sub do_not_reboot { sub do_not_reboot {
my $i = $iteration; my $i = $iteration;
...@@ -889,7 +1135,7 @@ sub dodie { ...@@ -889,7 +1135,7 @@ sub dodie {
if ($reboot_on_error && !do_not_reboot) { if ($reboot_on_error && !do_not_reboot) {
doprint "REBOOTING\n"; doprint "REBOOTING\n";
reboot; reboot_to_good;
} elsif ($poweroff_on_error && defined($power_off)) { } elsif ($poweroff_on_error && defined($power_off)) {
doprint "POWERING OFF\n"; doprint "POWERING OFF\n";
...@@ -975,6 +1221,43 @@ sub wait_for_monitor { ...@@ -975,6 +1221,43 @@ sub wait_for_monitor {
print "** Monitor flushed **\n"; print "** Monitor flushed **\n";
} }
sub save_logs {
my ($result, $basedir) = @_;
my @t = localtime;
my $date = sprintf "%04d%02d%02d%02d%02d%02d",
1900+$t[5],$t[4],$t[3],$t[2],$t[1],$t[0];
my $type = $build_type;
if ($type =~ /useconfig/) {
$type = "useconfig";
}
my $dir = "$machine-$test_type-$type-$result-$date";
$dir = "$basedir/$dir";
if (!-d $dir) {
mkpath($dir) or
die "can't create $dir";
}
my %files = (
"config" => $output_config,
"buildlog" => $buildlog,
"dmesg" => $dmesg,
"testlog" => $testlog,
);
while (my ($name, $source) = each(%files)) {
if (-f "$source") {
cp "$source", "$dir/$name" or
die "failed to copy $source";
}
}
doprint "*** Saved info to $dir ***\n";
}
sub fail { sub fail {
if ($die_on_failure) { if ($die_on_failure) {
...@@ -988,7 +1271,7 @@ sub fail { ...@@ -988,7 +1271,7 @@ sub fail {
# no need to reboot for just building. # no need to reboot for just building.
if (!do_not_reboot) { if (!do_not_reboot) {
doprint "REBOOTING\n"; doprint "REBOOTING\n";
reboot $sleep_time; reboot_to_good $sleep_time;
} }
my $name = ""; my $name = "";
...@@ -1003,38 +1286,9 @@ sub fail { ...@@ -1003,38 +1286,9 @@ sub fail {
doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n"; doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n"; doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
return 1 if (!defined($store_failures)); if (defined($store_failures)) {
save_logs "fail", $store_failures;
my @t = localtime; }
my $date = sprintf "%04d%02d%02d%02d%02d%02d",
1900+$t[5],$t[4],$t[3],$t[2],$t[1],$t[0];
my $type = $build_type;
if ($type =~ /useconfig/) {
$type = "useconfig";
}
my $dir = "$machine-$test_type-$type-fail-$date";
my $faildir = "$store_failures/$dir";
if (!-d $faildir) {
mkpath($faildir) or
die "can't create $faildir";
}
if (-f "$output_config") {
cp "$output_config", "$faildir/config" or
die "failed to copy .config";
}
if (-f $buildlog) {
cp $buildlog, "$faildir/buildlog" or
die "failed to move $buildlog";
}
if (-f $dmesg) {
cp $dmesg, "$faildir/dmesg" or
die "failed to move $dmesg";
}
doprint "*** Saved info to $faildir ***\n";
return 1; return 1;
} }
...@@ -1170,13 +1424,16 @@ sub wait_for_input ...@@ -1170,13 +1424,16 @@ sub wait_for_input
} }
sub reboot_to { sub reboot_to {
if (defined($switch_to_test)) {
run_command $switch_to_test;
}
if ($reboot_type eq "grub") { if ($reboot_type eq "grub") {
run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch)'"; run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch)'";
reboot; } elsif (defined $reboot_script) {
return; run_command "$reboot_script";
} }
reboot;
run_command "$reboot_script";
} }
sub get_sha1 { sub get_sha1 {
...@@ -1274,7 +1531,7 @@ sub monitor { ...@@ -1274,7 +1531,7 @@ sub monitor {
} }
if ($full_line =~ /call trace:/i) { if ($full_line =~ /call trace:/i) {
if (!$bug && !$skip_call_trace) { if (!$ignore_errors && !$bug && !$skip_call_trace) {
$bug = 1; $bug = 1;
$failure_start = time; $failure_start = time;
} }
...@@ -1341,12 +1598,19 @@ sub monitor { ...@@ -1341,12 +1598,19 @@ sub monitor {
return 1; return 1;
} }
sub eval_kernel_version {
my ($option) = @_;
$option =~ s/\$KERNEL_VERSION/$version/g;
return $option;
}
sub do_post_install { sub do_post_install {
return if (!defined($post_install)); return if (!defined($post_install));
my $cp_post_install = $post_install; my $cp_post_install = eval_kernel_version $post_install;
$cp_post_install =~ s/\$KERNEL_VERSION/$version/g;
run_command "$cp_post_install" or run_command "$cp_post_install" or
dodie "Failed to run post install"; dodie "Failed to run post install";
} }
...@@ -1355,7 +1619,9 @@ sub install { ...@@ -1355,7 +1619,9 @@ sub install {
return if ($no_install); return if ($no_install);
run_scp "$outputdir/$build_target", "$target_image" or my $cp_target = eval_kernel_version $target_image;
run_scp "$outputdir/$build_target", "$cp_target" or
dodie "failed to copy image"; dodie "failed to copy image";
my $install_mods = 0; my $install_mods = 0;
...@@ -1640,9 +1906,13 @@ sub success { ...@@ -1640,9 +1906,13 @@ sub success {
doprint "*******************************************\n"; doprint "*******************************************\n";
doprint "*******************************************\n"; doprint "*******************************************\n";
if (defined($store_successes)) {
save_logs "success", $store_successes;
}
if ($i != $opt{"NUM_TESTS"} && !do_not_reboot) { if ($i != $opt{"NUM_TESTS"} && !do_not_reboot) {
doprint "Reboot and wait $sleep_time seconds\n"; doprint "Reboot and wait $sleep_time seconds\n";
reboot $sleep_time; reboot_to_good $sleep_time;
} }
} }
...@@ -1669,7 +1939,10 @@ sub child_run_test { ...@@ -1669,7 +1939,10 @@ sub child_run_test {
$poweroff_on_error = 0; $poweroff_on_error = 0;
$die_on_failure = 1; $die_on_failure = 1;
$redirect = "$testlog";
run_command $run_test or $failed = 1; run_command $run_test or $failed = 1;
undef $redirect;
exit $failed; exit $failed;
} }
...@@ -1744,6 +2017,43 @@ sub do_run_test { ...@@ -1744,6 +2017,43 @@ sub do_run_test {
waitpid $child_pid, 0; waitpid $child_pid, 0;
$child_exit = $?; $child_exit = $?;
if (!$bug && $in_bisect) {
if (defined($bisect_ret_good)) {
if ($child_exit == $bisect_ret_good) {
return 1;
}
}
if (defined($bisect_ret_skip)) {
if ($child_exit == $bisect_ret_skip) {
return -1;
}
}
if (defined($bisect_ret_abort)) {
if ($child_exit == $bisect_ret_abort) {
fail "test abort" and return -2;
}
}
if (defined($bisect_ret_bad)) {
if ($child_exit == $bisect_ret_skip) {
return 0;
}
}
if (defined($bisect_ret_default)) {
if ($bisect_ret_default eq "good") {
return 1;
} elsif ($bisect_ret_default eq "bad") {
return 0;
} elsif ($bisect_ret_default eq "skip") {
return -1;
} elsif ($bisect_ret_default eq "abort") {
return -2;
} else {
fail "unknown default action: $bisect_ret_default"
and return -2;
}
}
}
if ($bug || $child_exit) { if ($bug || $child_exit) {
return 0 if $in_bisect; return 0 if $in_bisect;
fail "test failed" and return 0; fail "test failed" and return 0;
...@@ -1770,7 +2080,7 @@ sub run_git_bisect { ...@@ -1770,7 +2080,7 @@ sub run_git_bisect {
if ($output =~ m/^(Bisecting: .*\(roughly \d+ steps?\))\s+\[([[:xdigit:]]+)\]/) { if ($output =~ m/^(Bisecting: .*\(roughly \d+ steps?\))\s+\[([[:xdigit:]]+)\]/) {
doprint "$1 [$2]\n"; doprint "$1 [$2]\n";
} elsif ($output =~ m/^([[:xdigit:]]+) is the first bad commit/) { } elsif ($output =~ m/^([[:xdigit:]]+) is the first bad commit/) {
$bisect_bad = $1; $bisect_bad_commit = $1;
doprint "Found bad commit... $1\n"; doprint "Found bad commit... $1\n";
return 0; return 0;
} else { } else {
...@@ -1783,7 +2093,7 @@ sub run_git_bisect { ...@@ -1783,7 +2093,7 @@ sub run_git_bisect {
sub bisect_reboot { sub bisect_reboot {
doprint "Reboot and sleep $bisect_sleep_time seconds\n"; doprint "Reboot and sleep $bisect_sleep_time seconds\n";
reboot $bisect_sleep_time; reboot_to_good $bisect_sleep_time;
} }
# returns 1 on success, 0 on failure, -1 on skip # returns 1 on success, 0 on failure, -1 on skip
...@@ -1868,21 +2178,28 @@ sub run_bisect { ...@@ -1868,21 +2178,28 @@ sub run_bisect {
} }
} }
sub update_bisect_replay {
my $tmp_log = "$tmpdir/ktest_bisect_log";
run_command "git bisect log > $tmp_log" or
die "can't create bisect log";
return $tmp_log;
}
sub bisect { sub bisect {
my ($i) = @_; my ($i) = @_;
my $result; my $result;
die "BISECT_GOOD[$i] not defined\n" if (!defined($opt{"BISECT_GOOD[$i]"})); die "BISECT_GOOD[$i] not defined\n" if (!defined($bisect_good));
die "BISECT_BAD[$i] not defined\n" if (!defined($opt{"BISECT_BAD[$i]"})); die "BISECT_BAD[$i] not defined\n" if (!defined($bisect_bad));
die "BISECT_TYPE[$i] not defined\n" if (!defined($opt{"BISECT_TYPE[$i]"})); die "BISECT_TYPE[$i] not defined\n" if (!defined($bisect_type));
my $good = $opt{"BISECT_GOOD[$i]"}; my $good = $bisect_good;
my $bad = $opt{"BISECT_BAD[$i]"}; my $bad = $bisect_bad;
my $type = $opt{"BISECT_TYPE[$i]"}; my $type = $bisect_type;
my $start = $opt{"BISECT_START[$i]"}; my $start = $bisect_start;
my $replay = $opt{"BISECT_REPLAY[$i]"}; my $replay = $bisect_replay;
my $start_files = $opt{"BISECT_FILES[$i]"}; my $start_files = $bisect_files;
if (defined($start_files)) { if (defined($start_files)) {
$start_files = " -- " . $start_files; $start_files = " -- " . $start_files;
...@@ -1894,8 +2211,7 @@ sub bisect { ...@@ -1894,8 +2211,7 @@ sub bisect {
$good = get_sha1($good); $good = get_sha1($good);
$bad = get_sha1($bad); $bad = get_sha1($bad);
if (defined($opt{"BISECT_REVERSE[$i]"}) && if (defined($bisect_reverse) && $bisect_reverse == 1) {
$opt{"BISECT_REVERSE[$i]"} == 1) {
doprint "Performing a reverse bisect (bad is good, good is bad!)\n"; doprint "Performing a reverse bisect (bad is good, good is bad!)\n";
$reverse_bisect = 1; $reverse_bisect = 1;
} else { } else {
...@@ -1907,8 +2223,31 @@ sub bisect { ...@@ -1907,8 +2223,31 @@ sub bisect {
$type = "boot"; $type = "boot";
} }
my $check = $opt{"BISECT_CHECK[$i]"}; # Check if a bisect was running
if (defined($check) && $check ne "0") { my $bisect_start_file = "$builddir/.git/BISECT_START";
my $check = $bisect_check;
my $do_check = defined($check) && $check ne "0";
if ( -f $bisect_start_file ) {
print "Bisect in progress found\n";
if ($do_check) {
print " If you say yes, then no checks of good or bad will be done\n";
}
if (defined($replay)) {
print "** BISECT_REPLAY is defined in config file **";
print " Ignore config option and perform new git bisect log?\n";
if (read_ync " (yes, no, or cancel) ") {
$replay = update_bisect_replay;
$do_check = 0;
}
} elsif (read_yn "read git log and continue?") {
$replay = update_bisect_replay;
$do_check = 0;
}
}
if ($do_check) {
# get current HEAD # get current HEAD
my $head = get_sha1("HEAD"); my $head = get_sha1("HEAD");
...@@ -1973,7 +2312,7 @@ sub bisect { ...@@ -1973,7 +2312,7 @@ sub bisect {
run_command "git bisect reset" or run_command "git bisect reset" or
dodie "could not reset git bisect"; dodie "could not reset git bisect";
doprint "Bad commit was [$bisect_bad]\n"; doprint "Bad commit was [$bisect_bad_commit]\n";
success $i; success $i;
} }
...@@ -2129,7 +2468,7 @@ sub run_config_bisect { ...@@ -2129,7 +2468,7 @@ sub run_config_bisect {
} }
doprint "***** RUN TEST ***\n"; doprint "***** RUN TEST ***\n";
my $type = $opt{"CONFIG_BISECT_TYPE[$iteration]"}; my $type = $config_bisect_type;
my $ret; my $ret;
my %current_config; my %current_config;
...@@ -2233,7 +2572,7 @@ sub run_config_bisect { ...@@ -2233,7 +2572,7 @@ sub run_config_bisect {
sub config_bisect { sub config_bisect {
my ($i) = @_; my ($i) = @_;
my $start_config = $opt{"CONFIG_BISECT[$i]"}; my $start_config = $config_bisect;
my $tmpconfig = "$tmpdir/use_config"; my $tmpconfig = "$tmpdir/use_config";
...@@ -2346,29 +2685,29 @@ sub config_bisect { ...@@ -2346,29 +2685,29 @@ sub config_bisect {
sub patchcheck_reboot { sub patchcheck_reboot {
doprint "Reboot and sleep $patchcheck_sleep_time seconds\n"; doprint "Reboot and sleep $patchcheck_sleep_time seconds\n";
reboot $patchcheck_sleep_time; reboot_to_good $patchcheck_sleep_time;
} }
sub patchcheck { sub patchcheck {
my ($i) = @_; my ($i) = @_;
die "PATCHCHECK_START[$i] not defined\n" die "PATCHCHECK_START[$i] not defined\n"
if (!defined($opt{"PATCHCHECK_START[$i]"})); if (!defined($patchcheck_start));
die "PATCHCHECK_TYPE[$i] not defined\n" die "PATCHCHECK_TYPE[$i] not defined\n"
if (!defined($opt{"PATCHCHECK_TYPE[$i]"})); if (!defined($patchcheck_type));
my $start = $opt{"PATCHCHECK_START[$i]"}; my $start = $patchcheck_start;
my $end = "HEAD"; my $end = "HEAD";
if (defined($opt{"PATCHCHECK_END[$i]"})) { if (defined($patchcheck_end)) {
$end = $opt{"PATCHCHECK_END[$i]"}; $end = $patchcheck_end;
} }
# Get the true sha1's since we can use things like HEAD~3 # Get the true sha1's since we can use things like HEAD~3
$start = get_sha1($start); $start = get_sha1($start);
$end = get_sha1($end); $end = get_sha1($end);
my $type = $opt{"PATCHCHECK_TYPE[$i]"}; my $type = $patchcheck_type;
# Can't have a test without having a test to run # Can't have a test without having a test to run
if ($type eq "test" && !defined($run_test)) { if ($type eq "test" && !defined($run_test)) {
...@@ -2963,7 +3302,7 @@ sub make_min_config { ...@@ -2963,7 +3302,7 @@ sub make_min_config {
} }
doprint "Reboot and wait $sleep_time seconds\n"; doprint "Reboot and wait $sleep_time seconds\n";
reboot $sleep_time; reboot_to_good $sleep_time;
} }
success $i; success $i;
...@@ -2985,13 +3324,27 @@ if ($#ARGV == 0) { ...@@ -2985,13 +3324,27 @@ if ($#ARGV == 0) {
} }
if (! -f $ktest_config) { if (! -f $ktest_config) {
$newconfig = 1;
get_test_case;
open(OUT, ">$ktest_config") or die "Can not create $ktest_config"; open(OUT, ">$ktest_config") or die "Can not create $ktest_config";
print OUT << "EOF" print OUT << "EOF"
# Generated by ktest.pl # Generated by ktest.pl
# #
# PWD is a ktest.pl variable that will result in the process working
# directory that ktest.pl is executed in.
# THIS_DIR is automatically assigned the PWD of the path that generated
# the config file. It is best to use this variable when assigning other
# directory paths within this directory. This allows you to easily
# move the test cases to other locations or to other machines.
#
THIS_DIR := $variable{"PWD"}
# Define each test with TEST_START # Define each test with TEST_START
# The config options below it will override the defaults # The config options below it will override the defaults
TEST_START TEST_START
TEST_TYPE = $default{"TEST_TYPE"}
DEFAULTS DEFAULTS
EOF EOF
...@@ -3011,7 +3364,7 @@ if ($#new_configs >= 0) { ...@@ -3011,7 +3364,7 @@ if ($#new_configs >= 0) {
open(OUT, ">>$ktest_config") or die "Can not append to $ktest_config"; open(OUT, ">>$ktest_config") or die "Can not append to $ktest_config";
foreach my $config (@new_configs) { foreach my $config (@new_configs) {
print OUT "$config = $entered_configs{$config}\n"; print OUT "$config = $entered_configs{$config}\n";
$opt{$config} = $entered_configs{$config}; $opt{$config} = process_variables($entered_configs{$config});
} }
} }
...@@ -3091,61 +3444,10 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { ...@@ -3091,61 +3444,10 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
my $makecmd = set_test_option("MAKE_CMD", $i); my $makecmd = set_test_option("MAKE_CMD", $i);
$machine = set_test_option("MACHINE", $i); # Load all the options into their mapped variable names
$ssh_user = set_test_option("SSH_USER", $i); foreach my $opt (keys %option_map) {
$tmpdir = set_test_option("TMP_DIR", $i); ${$option_map{$opt}} = set_test_option($opt, $i);
$outputdir = set_test_option("OUTPUT_DIR", $i); }
$builddir = set_test_option("BUILD_DIR", $i);
$test_type = set_test_option("TEST_TYPE", $i);
$build_type = set_test_option("BUILD_TYPE", $i);
$build_options = set_test_option("BUILD_OPTIONS", $i);
$pre_build = set_test_option("PRE_BUILD", $i);
$post_build = set_test_option("POST_BUILD", $i);
$pre_build_die = set_test_option("PRE_BUILD_DIE", $i);
$post_build_die = set_test_option("POST_BUILD_DIE", $i);
$power_cycle = set_test_option("POWER_CYCLE", $i);
$reboot = set_test_option("REBOOT", $i);
$noclean = set_test_option("BUILD_NOCLEAN", $i);
$minconfig = set_test_option("MIN_CONFIG", $i);
$output_minconfig = set_test_option("OUTPUT_MIN_CONFIG", $i);
$start_minconfig = set_test_option("START_MIN_CONFIG", $i);
$ignore_config = set_test_option("IGNORE_CONFIG", $i);
$run_test = set_test_option("TEST", $i);
$addconfig = set_test_option("ADD_CONFIG", $i);
$reboot_type = set_test_option("REBOOT_TYPE", $i);
$grub_menu = set_test_option("GRUB_MENU", $i);
$post_install = set_test_option("POST_INSTALL", $i);
$no_install = set_test_option("NO_INSTALL", $i);
$reboot_script = set_test_option("REBOOT_SCRIPT", $i);
$reboot_on_error = set_test_option("REBOOT_ON_ERROR", $i);
$poweroff_on_error = set_test_option("POWEROFF_ON_ERROR", $i);
$die_on_failure = set_test_option("DIE_ON_FAILURE", $i);
$power_off = set_test_option("POWER_OFF", $i);
$powercycle_after_reboot = set_test_option("POWERCYCLE_AFTER_REBOOT", $i);
$poweroff_after_halt = set_test_option("POWEROFF_AFTER_HALT", $i);
$sleep_time = set_test_option("SLEEP_TIME", $i);
$bisect_sleep_time = set_test_option("BISECT_SLEEP_TIME", $i);
$patchcheck_sleep_time = set_test_option("PATCHCHECK_SLEEP_TIME", $i);
$ignore_warnings = set_test_option("IGNORE_WARNINGS", $i);
$bisect_manual = set_test_option("BISECT_MANUAL", $i);
$bisect_skip = set_test_option("BISECT_SKIP", $i);
$config_bisect_good = set_test_option("CONFIG_BISECT_GOOD", $i);
$store_failures = set_test_option("STORE_FAILURES", $i);
$test_name = set_test_option("TEST_NAME", $i);
$timeout = set_test_option("TIMEOUT", $i);
$booted_timeout = set_test_option("BOOTED_TIMEOUT", $i);
$console = set_test_option("CONSOLE", $i);
$detect_triplefault = set_test_option("DETECT_TRIPLE_FAULT", $i);
$success_line = set_test_option("SUCCESS_LINE", $i);
$reboot_success_line = set_test_option("REBOOT_SUCCESS_LINE", $i);
$stop_after_success = set_test_option("STOP_AFTER_SUCCESS", $i);
$stop_after_failure = set_test_option("STOP_AFTER_FAILURE", $i);
$stop_test_after = set_test_option("STOP_TEST_AFTER", $i);
$build_target = set_test_option("BUILD_TARGET", $i);
$ssh_exec = set_test_option("SSH_EXEC", $i);
$scp_to_target = set_test_option("SCP_TO_TARGET", $i);
$target_image = set_test_option("TARGET_IMAGE", $i);
$localversion = set_test_option("LOCALVERSION", $i);
$start_minconfig_defined = 1; $start_minconfig_defined = 1;
...@@ -3166,26 +3468,26 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { ...@@ -3166,26 +3468,26 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
$ENV{"SSH_USER"} = $ssh_user; $ENV{"SSH_USER"} = $ssh_user;
$ENV{"MACHINE"} = $machine; $ENV{"MACHINE"} = $machine;
$target = "$ssh_user\@$machine";
$buildlog = "$tmpdir/buildlog-$machine"; $buildlog = "$tmpdir/buildlog-$machine";
$testlog = "$tmpdir/testlog-$machine";
$dmesg = "$tmpdir/dmesg-$machine"; $dmesg = "$tmpdir/dmesg-$machine";
$make = "$makecmd O=$outputdir"; $make = "$makecmd O=$outputdir";
$output_config = "$outputdir/.config"; $output_config = "$outputdir/.config";
if ($reboot_type eq "grub") { if (!$buildonly) {
dodie "GRUB_MENU not defined" if (!defined($grub_menu)); $target = "$ssh_user\@$machine";
} elsif (!defined($reboot_script)) { if ($reboot_type eq "grub") {
dodie "REBOOT_SCRIPT not defined" dodie "GRUB_MENU not defined" if (!defined($grub_menu));
}
} }
my $run_type = $build_type; my $run_type = $build_type;
if ($test_type eq "patchcheck") { if ($test_type eq "patchcheck") {
$run_type = $opt{"PATCHCHECK_TYPE[$i]"}; $run_type = $patchcheck_type;
} elsif ($test_type eq "bisect") { } elsif ($test_type eq "bisect") {
$run_type = $opt{"BISECT_TYPE[$i]"}; $run_type = $bisect_type;
} elsif ($test_type eq "config_bisect") { } elsif ($test_type eq "config_bisect") {
$run_type = $opt{"CONFIG_BISECT_TYPE[$i]"}; $run_type = $config_bisect_type;
} }
if ($test_type eq "make_min_config") { if ($test_type eq "make_min_config") {
...@@ -3205,6 +3507,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { ...@@ -3205,6 +3507,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
unlink $dmesg; unlink $dmesg;
unlink $buildlog; unlink $buildlog;
unlink $testlog;
if (defined($addconfig)) { if (defined($addconfig)) {
my $min = $minconfig; my $min = $minconfig;
...@@ -3216,7 +3519,6 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { ...@@ -3216,7 +3519,6 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
$minconfig = "$tmpdir/add_config"; $minconfig = "$tmpdir/add_config";
} }
my $checkout = $opt{"CHECKOUT[$i]"};
if (defined($checkout)) { if (defined($checkout)) {
run_command "git checkout $checkout" or run_command "git checkout $checkout" or
die "failed to checkout $checkout"; die "failed to checkout $checkout";
...@@ -3267,7 +3569,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { ...@@ -3267,7 +3569,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
if ($opt{"POWEROFF_ON_SUCCESS"}) { if ($opt{"POWEROFF_ON_SUCCESS"}) {
halt; halt;
} elsif ($opt{"REBOOT_ON_SUCCESS"} && !do_not_reboot) { } elsif ($opt{"REBOOT_ON_SUCCESS"} && !do_not_reboot) {
reboot; reboot_to_good;
} }
doprint "\n $successes of $opt{NUM_TESTS} tests were successful\n\n"; doprint "\n $successes of $opt{NUM_TESTS} tests were successful\n\n";
......
...@@ -346,7 +346,10 @@ ...@@ -346,7 +346,10 @@
#GRUB_MENU = Test Kernel #GRUB_MENU = Test Kernel
# A script to reboot the target into the test kernel # A script to reboot the target into the test kernel
# (Only mandatory if REBOOT_TYPE = script) # This and SWITCH_TO_TEST are about the same, except
# SWITCH_TO_TEST is run even for REBOOT_TYPE = grub.
# This may be left undefined.
# (default undefined)
#REBOOT_SCRIPT = #REBOOT_SCRIPT =
#### Optional Config Options (all have defaults) #### #### Optional Config Options (all have defaults) ####
...@@ -468,6 +471,27 @@ ...@@ -468,6 +471,27 @@
# The test will not modify that file. # The test will not modify that file.
#REBOOT_TYPE = grub #REBOOT_TYPE = grub
# If you are using a machine that doesn't boot with grub, and
# perhaps gets its kernel from a remote server (tftp), then
# you can use this option to update the target image with the
# test image.
#
# You could also do the same with POST_INSTALL, but the difference
# between that option and this option is that POST_INSTALL runs
# after the install, where this one runs just before a reboot.
# (default undefined)
#SWITCH_TO_TEST = cp ${OUTPUT_DIR}/${BUILD_TARGET} ${TARGET_IMAGE}
# If you are using a machine that doesn't boot with grub, and
# perhaps gets its kernel from a remote server (tftp), then
# you can use this option to update the target image with the
# the known good image to reboot safely back into.
#
# This option holds a command that will execute before needing
# to reboot to a good known image.
# (default undefined)
#SWITCH_TO_GOOD = ssh ${SSH_USER}/${MACHINE} cp good_image ${TARGET_IMAGE}
# The min config that is needed to build for the machine # The min config that is needed to build for the machine
# A nice way to create this is with the following: # A nice way to create this is with the following:
# #
...@@ -589,6 +613,12 @@ ...@@ -589,6 +613,12 @@
# (default undefined) # (default undefined)
#STORE_FAILURES = /home/test/failures #STORE_FAILURES = /home/test/failures
# Directory to store success directories on success. If this is not
# set, the .config, dmesg and bootlog will not be saved if a
# test succeeds.
# (default undefined)
#STORE_SUCCESSES = /home/test/successes
# Build without doing a make mrproper, or removing .config # Build without doing a make mrproper, or removing .config
# (default 0) # (default 0)
#BUILD_NOCLEAN = 0 #BUILD_NOCLEAN = 0
...@@ -700,6 +730,25 @@ ...@@ -700,6 +730,25 @@
# (default 1) # (default 1)
#DETECT_TRIPLE_FAULT = 0 #DETECT_TRIPLE_FAULT = 0
# All options in the config file should be either used by ktest
# or could be used within a value of another option. If an option
# in the config file is not used, ktest will warn about it and ask
# if you want to continue.
#
# If you don't care if there are non-used options, enable this
# option. Be careful though, a non-used option is usually a sign
# of an option name being typed incorrectly.
# (default 0)
#IGNORE_UNUSED = 1
# When testing a kernel that happens to have WARNINGs, and call
# traces, ktest.pl will detect these and fail a boot or test run
# due to warnings. By setting this option, ktest will ignore
# call traces, and will not fail a test if the kernel produces
# an oops. Use this option with care.
# (default 0)
#IGNORE_ERRORS = 1
#### Per test run options #### #### Per test run options ####
# The following options are only allowed in TEST_START sections. # The following options are only allowed in TEST_START sections.
# They are ignored in the DEFAULTS sections. # They are ignored in the DEFAULTS sections.
...@@ -862,6 +911,42 @@ ...@@ -862,6 +911,42 @@
# BISECT_BAD with BISECT_CHECK = good or # BISECT_BAD with BISECT_CHECK = good or
# BISECT_CHECK = bad, respectively. # BISECT_CHECK = bad, respectively.
# #
# BISECT_RET_GOOD = 0 (optional, default undefined)
#
# In case the specificed test returns something other than just
# 0 for good, and non-zero for bad, you can override 0 being
# good by defining BISECT_RET_GOOD.
#
# BISECT_RET_BAD = 1 (optional, default undefined)
#
# In case the specificed test returns something other than just
# 0 for good, and non-zero for bad, you can override non-zero being
# bad by defining BISECT_RET_BAD.
#
# BISECT_RET_ABORT = 255 (optional, default undefined)
#
# If you need to abort the bisect if the test discovers something
# that was wrong, you can define BISECT_RET_ABORT to be the error
# code returned by the test in order to abort the bisect.
#
# BISECT_RET_SKIP = 2 (optional, default undefined)
#
# If the test detects that the current commit is neither good
# nor bad, but something else happened (another bug detected)
# you can specify BISECT_RET_SKIP to an error code that the
# test returns when it should skip the current commit.
#
# BISECT_RET_DEFAULT = good (optional, default undefined)
#
# You can override the default of what to do when the above
# options are not hit. This may be one of, "good", "bad",
# "abort" or "skip" (without the quotes).
#
# Note, if you do not define any of the previous BISECT_RET_*
# and define BISECT_RET_DEFAULT, all bisects results will do
# what the BISECT_RET_DEFAULT has.
#
#
# Example: # Example:
# TEST_START # TEST_START
# TEST_TYPE = bisect # TEST_TYPE = bisect
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment