Merge branch 'be2net-next'

Sathya Perla says:

====================
be2net: patch set

Hi Dave, the following patch set reduces code duplication
in probe/pci-resume/eeh-resume and remove/pci-suspend/eeh-error and UE-error
detect/recovery paths. New helper routines have been introduced for this
purpose. Pls apply this set to the net-next tree. Thanks!

Patch 1 refactors the alloc/free code of adapter struct's fields into
a new set of helper routines -- be_drv_init/cleanup().

Patch 2 gets rid of the be_get_initial_config() routine as be_get_config()
is the place holder for related code.

Patch 3 introduces a new helper routine be_func_init() to execute the
initialization code used in probe/pci-resume/eeh-resume to remove
code duplication.

Patch 4 introduces a wrapper for scheduling/canceling error detection
task on similar lines to the be_worker task.

Patch 5 refactors UE error detection and recovery code on similar lines
to EEH code. Cleaning up resources is done in the error detection routine
followed by error recovery.

Patch 6 gets rid of the lancer_test_and_set_rdy_state() routine as the
same code now available in be_func_init().

Patch 7 creates a new helper routine be_resume() for all the common code
in be_probe(), be_pci_resume() and be_eeh_resume(), to reduce code duplication.

Patch 8 creates a new helper routine be_cleanup() for all the common
cleanup code duplicated in the suspend/EEH err detection paths.

Patch 9 moves be_func_init() inside be_setup() as everytime be_setup()
is called, the driver will have to wait for the function/FW to be be
initialized.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/emulex/benet/be.h

@@ -376,6 +376,7 @@ enum vf_state {
 #define BE_FLAGS_VXLAN_OFFLOADS			BIT(8)
 #define BE_FLAGS_SETUP_DONE			BIT(9)
 #define BE_FLAGS_EVT_INCOMPATIBLE_SFP		BIT(10)
+#define BE_FLAGS_ERR_DETECTION_SCHEDULED	BIT(11)
 
 #define BE_UC_PMAC_COUNT			30
 #define BE_VF_UC_PMAC_COUNT			2
@@ -501,7 +502,7 @@ struct be_adapter {
 	struct delayed_work work;
 	u16 work_counter;
 
-	struct delayed_work func_recovery_work;
+	struct delayed_work be_err_detection_work;
 	u32 flags;
 	u32 cmd_privileges;
 	/* Ethtool knobs and info */

drivers/net/ethernet/emulex/benet/be_cmds.c

@@ -635,73 +635,16 @@ static int lancer_wait_ready(struct be_adapter *adapter)
 	for (i = 0; i < SLIPORT_READY_TIMEOUT; i++) {
 		sliport_status = ioread32(adapter->db + SLIPORT_STATUS_OFFSET);
 		if (sliport_status & SLIPORT_STATUS_RDY_MASK)
-			break;
-
-		msleep(1000);
-	}
-
-	if (i == SLIPORT_READY_TIMEOUT)
-		return sliport_status ? : -1;
-
-	return 0;
-}
-
-static bool lancer_provisioning_error(struct be_adapter *adapter)
-{
-	u32 sliport_status = 0, sliport_err1 = 0, sliport_err2 = 0;
-
-	sliport_status = ioread32(adapter->db + SLIPORT_STATUS_OFFSET);
-	if (sliport_status & SLIPORT_STATUS_ERR_MASK) {
-		sliport_err1 = ioread32(adapter->db + SLIPORT_ERROR1_OFFSET);
-		sliport_err2 = ioread32(adapter->db + SLIPORT_ERROR2_OFFSET);
-
-		if (sliport_err1 == SLIPORT_ERROR_NO_RESOURCE1 &&
-		    sliport_err2 == SLIPORT_ERROR_NO_RESOURCE2)
-			return true;
-	}
-	return false;
-}
-
-int lancer_test_and_set_rdy_state(struct be_adapter *adapter)
-{
-	int status;
-	u32 sliport_status, err, reset_needed;
-	bool resource_error;
+			return 0;
 
-	resource_error = lancer_provisioning_error(adapter);
-	if (resource_error)
-		return -EAGAIN;
+		if (sliport_status & SLIPORT_STATUS_ERR_MASK &&
+		    !(sliport_status & SLIPORT_STATUS_RN_MASK))
+			return -EIO;
 
-	status = lancer_wait_ready(adapter);
-	if (!status) {
-		sliport_status = ioread32(adapter->db + SLIPORT_STATUS_OFFSET);
-		err = sliport_status & SLIPORT_STATUS_ERR_MASK;
-		reset_needed = sliport_status & SLIPORT_STATUS_RN_MASK;
-		if (err && reset_needed) {
-			iowrite32(SLI_PORT_CONTROL_IP_MASK,
-				  adapter->db + SLIPORT_CONTROL_OFFSET);
-
-			/* check if adapter has corrected the error */
-			status = lancer_wait_ready(adapter);
-			sliport_status = ioread32(adapter->db +
-						  SLIPORT_STATUS_OFFSET);
-			sliport_status &= (SLIPORT_STATUS_ERR_MASK |
-						SLIPORT_STATUS_RN_MASK);
-			if (status || sliport_status)
-				status = -1;
-		} else if (err || reset_needed) {
-			status = -1;
-		}
+		msleep(1000);
 	}
-	/* Stop error recovery if error is not recoverable.
-	 * No resource error is temporary errors and will go away
-	 * when PF provisions resources.
-	 */
-	resource_error = lancer_provisioning_error(adapter);
-	if (resource_error)
-		status = -EAGAIN;
 
-	return status;
+	return sliport_status ? : -1;
 }
 
 int be_fw_wait_ready(struct be_adapter *adapter)
@@ -720,6 +663,10 @@ int be_fw_wait_ready(struct be_adapter *adapter)
 	}
 
 	do {
+		/* There's no means to poll POST state on BE2/3 VFs */
+		if (BEx_chip(adapter) && be_virtfn(adapter))
+			return 0;
+
 		stage = be_POST_stage_get(adapter);
 		if (stage == POST_STAGE_ARMFW_RDY)
 			return 0;
@@ -734,7 +681,7 @@ int be_fw_wait_ready(struct be_adapter *adapter)
 
 err:
 	dev_err(dev, "POST timeout; stage=%#x\n", stage);
-	return -1;
+	return -ETIMEDOUT;
 }
 
 static inline struct be_sge *nonembedded_sgl(struct be_mcc_wrb *wrb)
@@ -2126,16 +2073,12 @@ int be_cmd_reset_function(struct be_adapter *adapter)
 	int status;
 
 	if (lancer_chip(adapter)) {
+		iowrite32(SLI_PORT_CONTROL_IP_MASK,
+			  adapter->db + SLIPORT_CONTROL_OFFSET);
 		status = lancer_wait_ready(adapter);
-		if (!status) {
-			iowrite32(SLI_PORT_CONTROL_IP_MASK,
-				  adapter->db + SLIPORT_CONTROL_OFFSET);
-			status = lancer_test_and_set_rdy_state(adapter);
-		}
-		if (status) {
+		if (status)
 			dev_err(&adapter->pdev->dev,
 				"Adapter in non recoverable error\n");
-		}
 		return status;
 	}
 

drivers/net/ethernet/emulex/benet/be_main.c

@@ -2844,12 +2844,12 @@ void be_detect_error(struct be_adapter *adapter)
 			sliport_err2 = ioread32(adapter->db +
 						SLIPORT_ERROR2_OFFSET);
 			adapter->hw_error = true;
+			error_detected = true;
 			/* Do not log error messages if its a FW reset */
 			if (sliport_err1 == SLIPORT_ERROR_FW_RESET1 &&
 			    sliport_err2 == SLIPORT_ERROR_FW_RESET2) {
 				dev_info(dev, "Firmware update in progress\n");
 			} else {
-				error_detected = true;
 				dev_err(dev, "Error detected in the card\n");
 				dev_err(dev, "ERR: sliport status 0x%x\n",
 					sliport_status);
@@ -3363,6 +3363,14 @@ static void be_cancel_worker(struct be_adapter *adapter)
 	}
 }
 
+static void be_cancel_err_detection(struct be_adapter *adapter)
+{
+	if (adapter->flags & BE_FLAGS_ERR_DETECTION_SCHEDULED) {
+		cancel_delayed_work_sync(&adapter->be_err_detection_work);
+		adapter->flags &= ~BE_FLAGS_ERR_DETECTION_SCHEDULED;
+	}
+}
+
 static void be_mac_clear(struct be_adapter *adapter)
 {
 	if (adapter->pmac_id) {
@@ -3771,13 +3779,25 @@ static void be_sriov_config(struct be_adapter *adapter)
 
 static int be_get_config(struct be_adapter *adapter)
 {
+	int status, level;
 	u16 profile_id;
-	int status;
+
+	status = be_cmd_get_cntl_attributes(adapter);
+	if (status)
+		return status;
 
 	status = be_cmd_query_fw_cfg(adapter);
 	if (status)
 		return status;
 
+	if (BEx_chip(adapter)) {
+		level = be_cmd_get_fw_log_level(adapter);
+		adapter->msg_enable =
+			level <= FW_LOG_LEVEL_DEFAULT ? NETIF_MSG_HW : 0;
+	}
+
+	be_cmd_get_acpi_wol_cap(adapter);
+
 	be_cmd_query_port_name(adapter);
 
 	if (be_physfn(adapter)) {
@@ -3835,6 +3855,13 @@ static void be_schedule_worker(struct be_adapter *adapter)
 	adapter->flags |= BE_FLAGS_WORKER_SCHEDULED;
 }
 
+static void be_schedule_err_detection(struct be_adapter *adapter)
+{
+	schedule_delayed_work(&adapter->be_err_detection_work,
+			      msecs_to_jiffies(1000));
+	adapter->flags |= BE_FLAGS_ERR_DETECTION_SCHEDULED;
+}
+
 static int be_setup_queues(struct be_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
@@ -3917,11 +3944,53 @@ static inline int fw_major_num(const char *fw_ver)
 	return fw_major;
 }
 
+/* If any VFs are already enabled don't FLR the PF */
+static bool be_reset_required(struct be_adapter *adapter)
+{
+	return pci_num_vf(adapter->pdev) ? false : true;
+}
+
+/* Wait for the FW to be ready and perform the required initialization */
+static int be_func_init(struct be_adapter *adapter)
+{
+	int status;
+
+	status = be_fw_wait_ready(adapter);
+	if (status)
+		return status;
+
+	if (be_reset_required(adapter)) {
+		status = be_cmd_reset_function(adapter);
+		if (status)
+			return status;
+
+		/* Wait for interrupts to quiesce after an FLR */
+		msleep(100);
+
+		/* We can clear all errors when function reset succeeds */
+		be_clear_all_error(adapter);
+	}
+
+	/* Tell FW we're ready to fire cmds */
+	status = be_cmd_fw_init(adapter);
+	if (status)
+		return status;
+
+	/* Allow interrupts for other ULPs running on NIC function */
+	be_intr_set(adapter, true);
+
+	return 0;
+}
+
 static int be_setup(struct be_adapter *adapter)
 {
 	struct device *dev = &adapter->pdev->dev;
 	int status;
 
+	status = be_func_init(adapter);
+	if (status)
+		return status;
+
 	be_setup_init(adapter);
 
 	if (!lancer_chip(adapter))
@@ -3967,8 +4036,6 @@ static int be_setup(struct be_adapter *adapter)
 
 	be_set_rx_mode(adapter->netdev);
 
-	be_cmd_get_acpi_wol_cap(adapter);
-
 	status = be_cmd_set_flow_control(adapter, adapter->tx_fc,
 					 adapter->rx_fc);
 	if (status)
@@ -4878,6 +4945,142 @@ static void be_netdev_init(struct net_device *netdev)
 	netdev->ethtool_ops = &be_ethtool_ops;
 }
 
+static void be_cleanup(struct be_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+
+	rtnl_lock();
+	netif_device_detach(netdev);
+	if (netif_running(netdev))
+		be_close(netdev);
+	rtnl_unlock();
+
+	be_clear(adapter);
+}
+
+static int be_resume(struct be_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	int status;
+
+	status = be_setup(adapter);
+	if (status)
+		return status;
+
+	if (netif_running(netdev)) {
+		status = be_open(netdev);
+		if (status)
+			return status;
+	}
+
+	netif_device_attach(netdev);
+
+	return 0;
+}
+
+static int be_err_recover(struct be_adapter *adapter)
+{
+	struct device *dev = &adapter->pdev->dev;
+	int status;
+
+	status = be_resume(adapter);
+	if (status)
+		goto err;
+
+	dev_info(dev, "Adapter recovery successful\n");
+	return 0;
+err:
+	if (be_physfn(adapter))
+		dev_err(dev, "Adapter recovery failed\n");
+	else
+		dev_err(dev, "Re-trying adapter recovery\n");
+
+	return status;
+}
+
+static void be_err_detection_task(struct work_struct *work)
+{
+	struct be_adapter *adapter =
+				container_of(work, struct be_adapter,
+					     be_err_detection_work.work);
+	int status = 0;
+
+	be_detect_error(adapter);
+
+	if (adapter->hw_error) {
+		be_cleanup(adapter);
+
+		/* As of now error recovery support is in Lancer only */
+		if (lancer_chip(adapter))
+			status = be_err_recover(adapter);
+	}
+
+	/* Always attempt recovery on VFs */
+	if (!status || be_virtfn(adapter))
+		be_schedule_err_detection(adapter);
+}
+
+static void be_log_sfp_info(struct be_adapter *adapter)
+{
+	int status;
+
+	status = be_cmd_query_sfp_info(adapter);
+	if (!status) {
+		dev_err(&adapter->pdev->dev,
+			"Unqualified SFP+ detected on %c from %s part no: %s",
+			adapter->port_name, adapter->phy.vendor_name,
+			adapter->phy.vendor_pn);
+	}
+	adapter->flags &= ~BE_FLAGS_EVT_INCOMPATIBLE_SFP;
+}
+
+static void be_worker(struct work_struct *work)
+{
+	struct be_adapter *adapter =
+		container_of(work, struct be_adapter, work.work);
+	struct be_rx_obj *rxo;
+	int i;
+
+	/* when interrupts are not yet enabled, just reap any pending
+	 * mcc completions
+	 */
+	if (!netif_running(adapter->netdev)) {
+		local_bh_disable();
+		be_process_mcc(adapter);
+		local_bh_enable();
+		goto reschedule;
+	}
+
+	if (!adapter->stats_cmd_sent) {
+		if (lancer_chip(adapter))
+			lancer_cmd_get_pport_stats(adapter,
+						   &adapter->stats_cmd);
+		else
+			be_cmd_get_stats(adapter, &adapter->stats_cmd);
+	}
+
+	if (be_physfn(adapter) &&
+	    MODULO(adapter->work_counter, adapter->be_get_temp_freq) == 0)
+		be_cmd_get_die_temperature(adapter);
+
+	for_all_rx_queues(adapter, rxo, i) {
+		/* Replenish RX-queues starved due to memory
+		 * allocation failures.
+		 */
+		if (rxo->rx_post_starved)
+			be_post_rx_frags(rxo, GFP_KERNEL, MAX_RX_POST);
+	}
+
+	be_eqd_update(adapter);
+
+	if (adapter->flags & BE_FLAGS_EVT_INCOMPATIBLE_SFP)
+		be_log_sfp_info(adapter);
+
+reschedule:
+	adapter->work_counter++;
+	schedule_delayed_work(&adapter->work, msecs_to_jiffies(1000));
+}
+
 static void be_unmap_pci_bars(struct be_adapter *adapter)
 {
 	if (adapter->csr)
@@ -4909,6 +5112,12 @@ static int be_roce_map_pci_bars(struct be_adapter *adapter)
 static int be_map_pci_bars(struct be_adapter *adapter)
 {
 	u8 __iomem *addr;
+	u32 sli_intf;
+
+	pci_read_config_dword(adapter->pdev, SLI_INTF_REG_OFFSET, &sli_intf);
+	adapter->sli_family = (sli_intf & SLI_INTF_FAMILY_MASK) >>
+				SLI_INTF_FAMILY_SHIFT;
+	adapter->virtfn = (sli_intf & SLI_INTF_FT_MASK) ? 1 : 0;
 
 	if (BEx_chip(adapter) && be_physfn(adapter)) {
 		adapter->csr = pci_iomap(adapter->pdev, 2, 0);
@@ -4930,109 +5139,94 @@ static int be_map_pci_bars(struct be_adapter *adapter)
 	return -ENOMEM;
 }
 
-static void be_ctrl_cleanup(struct be_adapter *adapter)
+static void be_drv_cleanup(struct be_adapter *adapter)
 {
 	struct be_dma_mem *mem = &adapter->mbox_mem_alloced;
-
-	be_unmap_pci_bars(adapter);
+	struct device *dev = &adapter->pdev->dev;
 
 	if (mem->va)
-		dma_free_coherent(&adapter->pdev->dev, mem->size, mem->va,
-				  mem->dma);
+		dma_free_coherent(dev, mem->size, mem->va, mem->dma);
 
 	mem = &adapter->rx_filter;
 	if (mem->va)
-		dma_free_coherent(&adapter->pdev->dev, mem->size, mem->va,
-				  mem->dma);
+		dma_free_coherent(dev, mem->size, mem->va, mem->dma);
+
+	mem = &adapter->stats_cmd;
+	if (mem->va)
+		dma_free_coherent(dev, mem->size, mem->va, mem->dma);
 }
 
-static int be_ctrl_init(struct be_adapter *adapter)
+/* Allocate and initialize various fields in be_adapter struct */
+static int be_drv_init(struct be_adapter *adapter)
 {
 	struct be_dma_mem *mbox_mem_alloc = &adapter->mbox_mem_alloced;
 	struct be_dma_mem *mbox_mem_align = &adapter->mbox_mem;
 	struct be_dma_mem *rx_filter = &adapter->rx_filter;
-	u32 sli_intf;
-	int status;
-
-	pci_read_config_dword(adapter->pdev, SLI_INTF_REG_OFFSET, &sli_intf);
-	adapter->sli_family = (sli_intf & SLI_INTF_FAMILY_MASK) >>
-				 SLI_INTF_FAMILY_SHIFT;
-	adapter->virtfn = (sli_intf & SLI_INTF_FT_MASK) ? 1 : 0;
-
-	status = be_map_pci_bars(adapter);
-	if (status)
-		goto done;
+	struct be_dma_mem *stats_cmd = &adapter->stats_cmd;
+	struct device *dev = &adapter->pdev->dev;
+	int status = 0;
 
 	mbox_mem_alloc->size = sizeof(struct be_mcc_mailbox) + 16;
-	mbox_mem_alloc->va = dma_alloc_coherent(&adapter->pdev->dev,
-						mbox_mem_alloc->size,
+	mbox_mem_alloc->va = dma_alloc_coherent(dev, mbox_mem_alloc->size,
 						&mbox_mem_alloc->dma,
 						GFP_KERNEL);
-	if (!mbox_mem_alloc->va) {
-		status = -ENOMEM;
-		goto unmap_pci_bars;
-	}
+	if (!mbox_mem_alloc->va)
+		return -ENOMEM;
+
 	mbox_mem_align->size = sizeof(struct be_mcc_mailbox);
 	mbox_mem_align->va = PTR_ALIGN(mbox_mem_alloc->va, 16);
 	mbox_mem_align->dma = PTR_ALIGN(mbox_mem_alloc->dma, 16);
 	memset(mbox_mem_align->va, 0, sizeof(struct be_mcc_mailbox));
 
 	rx_filter->size = sizeof(struct be_cmd_req_rx_filter);
-	rx_filter->va = dma_zalloc_coherent(&adapter->pdev->dev,
-					    rx_filter->size, &rx_filter->dma,
-					    GFP_KERNEL);
+	rx_filter->va = dma_zalloc_coherent(dev, rx_filter->size,
+					    &rx_filter->dma, GFP_KERNEL);
 	if (!rx_filter->va) {
 		status = -ENOMEM;
 		goto free_mbox;
 	}
 
+	if (lancer_chip(adapter))
+		stats_cmd->size = sizeof(struct lancer_cmd_req_pport_stats);
+	else if (BE2_chip(adapter))
+		stats_cmd->size = sizeof(struct be_cmd_req_get_stats_v0);
+	else if (BE3_chip(adapter))
+		stats_cmd->size = sizeof(struct be_cmd_req_get_stats_v1);
+	else
+		stats_cmd->size = sizeof(struct be_cmd_req_get_stats_v2);
+	stats_cmd->va = dma_zalloc_coherent(dev, stats_cmd->size,
+					    &stats_cmd->dma, GFP_KERNEL);
+	if (!stats_cmd->va) {
+		status = -ENOMEM;
+		goto free_rx_filter;
+	}
+
 	mutex_init(&adapter->mbox_lock);
 	spin_lock_init(&adapter->mcc_lock);
 	spin_lock_init(&adapter->mcc_cq_lock);
-
 	init_completion(&adapter->et_cmd_compl);
-	pci_save_state(adapter->pdev);
-	return 0;
 
-free_mbox:
-	dma_free_coherent(&adapter->pdev->dev, mbox_mem_alloc->size,
-			  mbox_mem_alloc->va, mbox_mem_alloc->dma);
-
-unmap_pci_bars:
-	be_unmap_pci_bars(adapter);
-
-done:
-	return status;
-}
-
-static void be_stats_cleanup(struct be_adapter *adapter)
-{
-	struct be_dma_mem *cmd = &adapter->stats_cmd;
+	pci_save_state(adapter->pdev);
 
-	if (cmd->va)
-		dma_free_coherent(&adapter->pdev->dev, cmd->size,
-				  cmd->va, cmd->dma);
-}
+	INIT_DELAYED_WORK(&adapter->work, be_worker);
+	INIT_DELAYED_WORK(&adapter->be_err_detection_work,
+			  be_err_detection_task);
 
-static int be_stats_init(struct be_adapter *adapter)
-{
-	struct be_dma_mem *cmd = &adapter->stats_cmd;
+	adapter->rx_fc = true;
+	adapter->tx_fc = true;
 
-	if (lancer_chip(adapter))
-		cmd->size = sizeof(struct lancer_cmd_req_pport_stats);
-	else if (BE2_chip(adapter))
-		cmd->size = sizeof(struct be_cmd_req_get_stats_v0);
-	else if (BE3_chip(adapter))
-		cmd->size = sizeof(struct be_cmd_req_get_stats_v1);
-	else
-		/* ALL non-BE ASICs */
-		cmd->size = sizeof(struct be_cmd_req_get_stats_v2);
+	/* Must be a power of 2 or else MODULO will BUG_ON */
+	adapter->be_get_temp_freq = 64;
+	adapter->cfg_num_qs = netif_get_num_default_rss_queues();
 
-	cmd->va = dma_zalloc_coherent(&adapter->pdev->dev, cmd->size, &cmd->dma,
-				      GFP_KERNEL);
-	if (!cmd->va)
-		return -ENOMEM;
 	return 0;
+
+free_rx_filter:
+	dma_free_coherent(dev, rx_filter->size, rx_filter->va, rx_filter->dma);
+free_mbox:
+	dma_free_coherent(dev, mbox_mem_alloc->size, mbox_mem_alloc->va,
+			  mbox_mem_alloc->dma);
+	return status;
 }
 
 static void be_remove(struct pci_dev *pdev)
@@ -5045,7 +5239,7 @@ static void be_remove(struct pci_dev *pdev)
 	be_roce_dev_remove(adapter);
 	be_intr_set(adapter, false);
 
-	cancel_delayed_work_sync(&adapter->func_recovery_work);
+	be_cancel_err_detection(adapter);
 
 	unregister_netdev(adapter->netdev);
 
@@ -5054,9 +5248,8 @@ static void be_remove(struct pci_dev *pdev)
 	/* tell fw we're done with firing cmds */
 	be_cmd_fw_clean(adapter);
 
-	be_stats_cleanup(adapter);
-
-	be_ctrl_cleanup(adapter);
+	be_unmap_pci_bars(adapter);
+	be_drv_cleanup(adapter);
 
 	pci_disable_pcie_error_reporting(pdev);
 
@@ -5066,156 +5259,6 @@ static void be_remove(struct pci_dev *pdev)
 	free_netdev(adapter->netdev);
 }
 
-static int be_get_initial_config(struct be_adapter *adapter)
-{
-	int status, level;
-
-	status = be_cmd_get_cntl_attributes(adapter);
-	if (status)
-		return status;
-
-	/* Must be a power of 2 or else MODULO will BUG_ON */
-	adapter->be_get_temp_freq = 64;
-
-	if (BEx_chip(adapter)) {
-		level = be_cmd_get_fw_log_level(adapter);
-		adapter->msg_enable =
-			level <= FW_LOG_LEVEL_DEFAULT ? NETIF_MSG_HW : 0;
-	}
-
-	adapter->cfg_num_qs = netif_get_num_default_rss_queues();
-	return 0;
-}
-
-static int lancer_recover_func(struct be_adapter *adapter)
-{
-	struct device *dev = &adapter->pdev->dev;
-	int status;
-
-	status = lancer_test_and_set_rdy_state(adapter);
-	if (status)
-		goto err;
-
-	if (netif_running(adapter->netdev))
-		be_close(adapter->netdev);
-
-	be_clear(adapter);
-
-	be_clear_all_error(adapter);
-
-	status = be_setup(adapter);
-	if (status)
-		goto err;
-
-	if (netif_running(adapter->netdev)) {
-		status = be_open(adapter->netdev);
-		if (status)
-			goto err;
-	}
-
-	dev_err(dev, "Adapter recovery successful\n");
-	return 0;
-err:
-	if (status == -EAGAIN)
-		dev_err(dev, "Waiting for resource provisioning\n");
-	else
-		dev_err(dev, "Adapter recovery failed\n");
-
-	return status;
-}
-
-static void be_func_recovery_task(struct work_struct *work)
-{
-	struct be_adapter *adapter =
-		container_of(work, struct be_adapter,  func_recovery_work.work);
-	int status = 0;
-
-	be_detect_error(adapter);
-
-	if (adapter->hw_error && lancer_chip(adapter)) {
-		rtnl_lock();
-		netif_device_detach(adapter->netdev);
-		rtnl_unlock();
-
-		status = lancer_recover_func(adapter);
-		if (!status)
-			netif_device_attach(adapter->netdev);
-	}
-
-	/* In Lancer, for all errors other than provisioning error (-EAGAIN),
-	 * no need to attempt further recovery.
-	 */
-	if (!status || status == -EAGAIN)
-		schedule_delayed_work(&adapter->func_recovery_work,
-				      msecs_to_jiffies(1000));
-}
-
-static void be_log_sfp_info(struct be_adapter *adapter)
-{
-	int status;
-
-	status = be_cmd_query_sfp_info(adapter);
-	if (!status) {
-		dev_err(&adapter->pdev->dev,
-			"Unqualified SFP+ detected on %c from %s part no: %s",
-			adapter->port_name, adapter->phy.vendor_name,
-			adapter->phy.vendor_pn);
-	}
-	adapter->flags &= ~BE_FLAGS_EVT_INCOMPATIBLE_SFP;
-}
-
-static void be_worker(struct work_struct *work)
-{
-	struct be_adapter *adapter =
-		container_of(work, struct be_adapter, work.work);
-	struct be_rx_obj *rxo;
-	int i;
-
-	/* when interrupts are not yet enabled, just reap any pending
-	* mcc completions */
-	if (!netif_running(adapter->netdev)) {
-		local_bh_disable();
-		be_process_mcc(adapter);
-		local_bh_enable();
-		goto reschedule;
-	}
-
-	if (!adapter->stats_cmd_sent) {
-		if (lancer_chip(adapter))
-			lancer_cmd_get_pport_stats(adapter,
-						   &adapter->stats_cmd);
-		else
-			be_cmd_get_stats(adapter, &adapter->stats_cmd);
-	}
-
-	if (be_physfn(adapter) &&
-	    MODULO(adapter->work_counter, adapter->be_get_temp_freq) == 0)
-		be_cmd_get_die_temperature(adapter);
-
-	for_all_rx_queues(adapter, rxo, i) {
-		/* Replenish RX-queues starved due to memory
-		 * allocation failures.
-		 */
-		if (rxo->rx_post_starved)
-			be_post_rx_frags(rxo, GFP_KERNEL, MAX_RX_POST);
-	}
-
-	be_eqd_update(adapter);
-
-	if (adapter->flags & BE_FLAGS_EVT_INCOMPATIBLE_SFP)
-		be_log_sfp_info(adapter);
-
-reschedule:
-	adapter->work_counter++;
-	schedule_delayed_work(&adapter->work, msecs_to_jiffies(1000));
-}
-
-/* If any VFs are already enabled don't FLR the PF */
-static bool be_reset_required(struct be_adapter *adapter)
-{
-	return pci_num_vf(adapter->pdev) ? false : true;
-}
-
 static char *mc_name(struct be_adapter *adapter)
 {
 	char *str = "";	/* default */
@@ -5314,50 +5357,17 @@ static int be_probe(struct pci_dev *pdev, const struct pci_device_id *pdev_id)
 	if (!status)
 		dev_info(&pdev->dev, "PCIe error reporting enabled\n");
 
-	status = be_ctrl_init(adapter);
+	status = be_map_pci_bars(adapter);
 	if (status)
 		goto free_netdev;
 
-	/* sync up with fw's ready state */
-	if (be_physfn(adapter)) {
-		status = be_fw_wait_ready(adapter);
-		if (status)
-			goto ctrl_clean;
-	}
-
-	if (be_reset_required(adapter)) {
-		status = be_cmd_reset_function(adapter);
-		if (status)
-			goto ctrl_clean;
-
-		/* Wait for interrupts to quiesce after an FLR */
-		msleep(100);
-	}
-
-	/* Allow interrupts for other ULPs running on NIC function */
-	be_intr_set(adapter, true);
-
-	/* tell fw we're ready to fire cmds */
-	status = be_cmd_fw_init(adapter);
-	if (status)
-		goto ctrl_clean;
-
-	status = be_stats_init(adapter);
+	status = be_drv_init(adapter);
 	if (status)
-		goto ctrl_clean;
-
-	status = be_get_initial_config(adapter);
-	if (status)
-		goto stats_clean;
-
-	INIT_DELAYED_WORK(&adapter->work, be_worker);
-	INIT_DELAYED_WORK(&adapter->func_recovery_work, be_func_recovery_task);
-	adapter->rx_fc = true;
-	adapter->tx_fc = true;
+		goto unmap_bars;
 
 	status = be_setup(adapter);
 	if (status)
-		goto stats_clean;
+		goto drv_cleanup;
 
 	be_netdev_init(netdev);
 	status = register_netdev(netdev);
@@ -5366,8 +5376,7 @@ static int be_probe(struct pci_dev *pdev, const struct pci_device_id *pdev_id)
 
 	be_roce_dev_add(adapter);
 
-	schedule_delayed_work(&adapter->func_recovery_work,
-			      msecs_to_jiffies(1000));
+	be_schedule_err_detection(adapter);
 
 	dev_info(&pdev->dev, "%s: %s %s port %c\n", nic_name(pdev),
 		 func_name(adapter), mc_name(adapter), adapter->port_name);
@@ -5376,10 +5385,10 @@ static int be_probe(struct pci_dev *pdev, const struct pci_device_id *pdev_id)
 
 unsetup:
 	be_clear(adapter);
-stats_clean:
-	be_stats_cleanup(adapter);
-ctrl_clean:
-	be_ctrl_cleanup(adapter);
+drv_cleanup:
+	be_drv_cleanup(adapter);
+unmap_bars:
+	be_unmap_pci_bars(adapter);
 free_netdev:
 	free_netdev(netdev);
 rel_reg:
@@ -5394,21 +5403,14 @@ static int be_probe(struct pci_dev *pdev, const struct pci_device_id *pdev_id)
 static int be_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	struct be_adapter *adapter = pci_get_drvdata(pdev);
-	struct net_device *netdev =  adapter->netdev;
 
 	if (adapter->wol_en)
 		be_setup_wol(adapter, true);
 
 	be_intr_set(adapter, false);
-	cancel_delayed_work_sync(&adapter->func_recovery_work);
+	be_cancel_err_detection(adapter);
 
-	netif_device_detach(netdev);
-	if (netif_running(netdev)) {
-		rtnl_lock();
-		be_close(netdev);
-		rtnl_unlock();
-	}
-	be_clear(adapter);
+	be_cleanup(adapter);
 
 	pci_save_state(pdev);
 	pci_disable_device(pdev);
@@ -5416,13 +5418,10 @@ static int be_suspend(struct pci_dev *pdev, pm_message_t state)
 	return 0;
 }
 
-static int be_resume(struct pci_dev *pdev)
+static int be_pci_resume(struct pci_dev *pdev)
 {
-	int status = 0;
 	struct be_adapter *adapter = pci_get_drvdata(pdev);
-	struct net_device *netdev =  adapter->netdev;
-
-	netif_device_detach(netdev);
+	int status = 0;
 
 	status = pci_enable_device(pdev);
 	if (status)
@@ -5431,30 +5430,11 @@ static int be_resume(struct pci_dev *pdev)
 	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
 
-	status = be_fw_wait_ready(adapter);
+	status = be_resume(adapter);
 	if (status)
 		return status;
 
-	status = be_cmd_reset_function(adapter);
-	if (status)
-		return status;
-
-	be_intr_set(adapter, true);
-	/* tell fw we're ready to fire cmds */
-	status = be_cmd_fw_init(adapter);
-	if (status)
-		return status;
-
-	be_setup(adapter);
-	if (netif_running(netdev)) {
-		rtnl_lock();
-		be_open(netdev);
-		rtnl_unlock();
-	}
-
-	schedule_delayed_work(&adapter->func_recovery_work,
-			      msecs_to_jiffies(1000));
-	netif_device_attach(netdev);
+	be_schedule_err_detection(adapter);
 
 	if (adapter->wol_en)
 		be_setup_wol(adapter, false);
@@ -5474,7 +5454,7 @@ static void be_shutdown(struct pci_dev *pdev)
 
 	be_roce_dev_shutdown(adapter);
 	cancel_delayed_work_sync(&adapter->work);
-	cancel_delayed_work_sync(&adapter->func_recovery_work);
+	be_cancel_err_detection(adapter);
 
 	netif_device_detach(adapter->netdev);
 
@@ -5487,22 +5467,15 @@ static pci_ers_result_t be_eeh_err_detected(struct pci_dev *pdev,
 					    pci_channel_state_t state)
 {
 	struct be_adapter *adapter = pci_get_drvdata(pdev);
-	struct net_device *netdev =  adapter->netdev;
 
 	dev_err(&adapter->pdev->dev, "EEH error detected\n");
 
 	if (!adapter->eeh_error) {
 		adapter->eeh_error = true;
 
-		cancel_delayed_work_sync(&adapter->func_recovery_work);
+		be_cancel_err_detection(adapter);
 
-		rtnl_lock();
-		netif_device_detach(netdev);
-		if (netif_running(netdev))
-			be_close(netdev);
-		rtnl_unlock();
-
-		be_clear(adapter);
+		be_cleanup(adapter);
 	}
 
 	if (state == pci_channel_io_perm_failure)
@@ -5553,40 +5526,16 @@ static void be_eeh_resume(struct pci_dev *pdev)
 {
 	int status = 0;
 	struct be_adapter *adapter = pci_get_drvdata(pdev);
-	struct net_device *netdev =  adapter->netdev;
 
 	dev_info(&adapter->pdev->dev, "EEH resume\n");
 
 	pci_save_state(pdev);
 
-	status = be_cmd_reset_function(adapter);
+	status = be_resume(adapter);
 	if (status)
 		goto err;
 
-	/* On some BE3 FW versions, after a HW reset,
-	 * interrupts will remain disabled for each function.
-	 * So, explicitly enable interrupts
-	 */
-	be_intr_set(adapter, true);
-
-	/* tell fw we're ready to fire cmds */
-	status = be_cmd_fw_init(adapter);
-	if (status)
-		goto err;
-
-	status = be_setup(adapter);
-	if (status)
-		goto err;
-
-	if (netif_running(netdev)) {
-		status = be_open(netdev);
-		if (status)
-			goto err;
-	}
-
-	schedule_delayed_work(&adapter->func_recovery_work,
-			      msecs_to_jiffies(1000));
-	netif_device_attach(netdev);
+	be_schedule_err_detection(adapter);
 	return;
 err:
 	dev_err(&adapter->pdev->dev, "EEH resume failed\n");
@@ -5604,7 +5553,7 @@ static struct pci_driver be_driver = {
 	.probe = be_probe,
 	.remove = be_remove,
 	.suspend = be_suspend,
-	.resume = be_resume,
+	.resume = be_pci_resume,
 	.shutdown = be_shutdown,
 	.err_handler = &be_eeh_handlers
 };