mmc: sdhci: Properly enable SDIO IRQ wakeups

A little more work was needed for SDIO IRQ wakeups to be functional.

Wake-on-WLAN on the SD WiFi adapter in the XO-1.5 laptop is now working.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

drivers/mmc/host/sdhci-pci.c

@@ -637,6 +637,7 @@ static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state)
 {
 	struct sdhci_pci_chip *chip;
 	struct sdhci_pci_slot *slot;
+	mmc_pm_flag_t slot_pm_flags;
 	mmc_pm_flag_t pm_flags = 0;
 	int i, ret;
 
@@ -657,7 +658,11 @@ static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state)
 			return ret;
 		}
 
-		pm_flags |= slot->host->mmc->pm_flags;
+		slot_pm_flags = slot->host->mmc->pm_flags;
+		if (slot_pm_flags & MMC_PM_WAKE_SDIO_IRQ)
+			sdhci_enable_irq_wakeups(slot->host);
+
+		pm_flags |= slot_pm_flags;
 	}
 
 	if (chip->fixes && chip->fixes->suspend) {
@@ -671,8 +676,10 @@ static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state)
 
 	pci_save_state(pdev);
 	if (pm_flags & MMC_PM_KEEP_POWER) {
-		if (pm_flags & MMC_PM_WAKE_SDIO_IRQ)
+		if (pm_flags & MMC_PM_WAKE_SDIO_IRQ) {
+			pci_pme_active(pdev, true);
 			pci_enable_wake(pdev, PCI_D3hot, 1);
+		}
 		pci_set_power_state(pdev, PCI_D3hot);
 	} else {
 		pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);

drivers/mmc/host/sdhci.c

@@ -1681,6 +1681,16 @@ int sdhci_resume_host(struct sdhci_host *host)
 
 EXPORT_SYMBOL_GPL(sdhci_resume_host);
 
+void sdhci_enable_irq_wakeups(struct sdhci_host *host)
+{
+	u8 val;
+	val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
+	val |= SDHCI_WAKE_ON_INT;
+	sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
+}
+
+EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups);
+
 #endif /* CONFIG_PM */
 
 /*****************************************************************************\

drivers/mmc/host/sdhci.h

@@ -87,6 +87,9 @@
 #define SDHCI_BLOCK_GAP_CONTROL	0x2A
 
 #define SDHCI_WAKE_UP_CONTROL	0x2B
+#define  SDHCI_WAKE_ON_INT	0x01
+#define  SDHCI_WAKE_ON_INSERT	0x02
+#define  SDHCI_WAKE_ON_REMOVE	0x04
 
 #define SDHCI_CLOCK_CONTROL	0x2C
 #define  SDHCI_DIVIDER_SHIFT	8
@@ -317,6 +320,7 @@ extern void sdhci_remove_host(struct sdhci_host *host, int dead);
 #ifdef CONFIG_PM
 extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state);
 extern int sdhci_resume_host(struct sdhci_host *host);
+extern void sdhci_enable_irq_wakeups(struct sdhci_host *host);
 #endif
 
 #endif /* __SDHCI_HW_H */