Commit 600a897d authored by Arend van Spriel's avatar Arend van Spriel Committed by John W. Linville

brcmfmac: determine chanspec from struct cfg80211_chan_def info

The struct cfg80211_chan_def contains additional info to derive the
bandwidth and side-band information of the chanspec. This patch adds
chandef_to_chanspec() function used in IBSS join and starting AP
operation.
Reviewed-by: default avatarFranky Lin <frankyl@broadcom.com>
Reviewed-by: default avatarHante Meuleman <meuleman@broadcom.com>
Signed-off-by: default avatarArend van Spriel <arend@broadcom.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent ee942ecc
...@@ -341,6 +341,60 @@ static u8 brcmf_mw_to_qdbm(u16 mw) ...@@ -341,6 +341,60 @@ static u8 brcmf_mw_to_qdbm(u16 mw)
return qdbm; return qdbm;
} }
u16 chandef_to_chanspec(struct brcmu_d11inf *d11inf,
struct cfg80211_chan_def *ch)
{
struct brcmu_chan ch_inf;
s32 primary_offset;
brcmf_dbg(TRACE, "chandef: control %d center %d width %d\n",
ch->chan->center_freq, ch->center_freq1, ch->width);
ch_inf.chnum = ieee80211_frequency_to_channel(ch->center_freq1);
primary_offset = ch->center_freq1 - ch->chan->center_freq;
switch (ch->width) {
case NL80211_CHAN_WIDTH_20:
ch_inf.bw = BRCMU_CHAN_BW_20;
WARN_ON(primary_offset != 0);
break;
case NL80211_CHAN_WIDTH_40:
ch_inf.bw = BRCMU_CHAN_BW_40;
if (primary_offset < 0)
ch_inf.sb = BRCMU_CHAN_SB_U;
else
ch_inf.sb = BRCMU_CHAN_SB_L;
break;
case NL80211_CHAN_WIDTH_80:
ch_inf.bw = BRCMU_CHAN_BW_80;
if (primary_offset < 0) {
if (primary_offset < -CH_10MHZ_APART)
ch_inf.sb = BRCMU_CHAN_SB_UU;
else
ch_inf.sb = BRCMU_CHAN_SB_UL;
} else {
if (primary_offset > CH_10MHZ_APART)
ch_inf.sb = BRCMU_CHAN_SB_LL;
else
ch_inf.sb = BRCMU_CHAN_SB_LU;
}
break;
default:
WARN_ON_ONCE(1);
}
switch (ch->chan->band) {
case IEEE80211_BAND_2GHZ:
ch_inf.band = BRCMU_CHAN_BAND_2G;
break;
case IEEE80211_BAND_5GHZ:
ch_inf.band = BRCMU_CHAN_BAND_5G;
break;
default:
WARN_ON_ONCE(1);
}
d11inf->encchspec(&ch_inf);
return ch_inf.chspec;
}
u16 channel_to_chanspec(struct brcmu_d11inf *d11inf, u16 channel_to_chanspec(struct brcmu_d11inf *d11inf,
struct ieee80211_channel *ch) struct ieee80211_channel *ch)
{ {
...@@ -1236,8 +1290,8 @@ brcmf_cfg80211_join_ibss(struct wiphy *wiphy, struct net_device *ndev, ...@@ -1236,8 +1290,8 @@ brcmf_cfg80211_join_ibss(struct wiphy *wiphy, struct net_device *ndev,
params->chandef.chan->center_freq); params->chandef.chan->center_freq);
if (params->channel_fixed) { if (params->channel_fixed) {
/* adding chanspec */ /* adding chanspec */
chanspec = channel_to_chanspec(&cfg->d11inf, chanspec = chandef_to_chanspec(&cfg->d11inf,
params->chandef.chan); &params->chandef);
join_params.params_le.chanspec_list[0] = join_params.params_le.chanspec_list[0] =
cpu_to_le16(chanspec); cpu_to_le16(chanspec);
join_params.params_le.chanspec_num = cpu_to_le32(1); join_params.params_le.chanspec_num = cpu_to_le32(1);
...@@ -3810,7 +3864,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, ...@@ -3810,7 +3864,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev,
brcmf_config_ap_mgmt_ie(ifp->vif, &settings->beacon); brcmf_config_ap_mgmt_ie(ifp->vif, &settings->beacon);
chanspec = channel_to_chanspec(&cfg->d11inf, settings->chandef.chan); chanspec = chandef_to_chanspec(&cfg->d11inf, &settings->chandef);
err = brcmf_fil_iovar_int_set(ifp, "chanspec", chanspec); err = brcmf_fil_iovar_int_set(ifp, "chanspec", chanspec);
if (err < 0) { if (err < 0) {
brcmf_err("Set Channel failed: chspec=%d, %d\n", chanspec, err); brcmf_err("Set Channel failed: chspec=%d, %d\n", chanspec, err);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment