Merge branch 'net-bcmgenet-restore-internal-EPHY-support'

Doug Berger says:

====================
net: bcmgenet: restore internal EPHY support

I managed to get my hands on an old BCM97435SVMB board to do some
testing with the latest kernel and uncovered a number of things
that managed to get broken over the years (some by me ;).

This commit set attempts to correct the errors I observed in my
testing.

The first commit applies to all internal PHYs to restore proper
reporting of link status when a link comes up.

The second commit restores the soft reset to the initialization of
the older internal EPHYs used by 40nm Set-Top Box devices.

The third corrects a bug I introduced when removing excessive soft
resets by altering the initialization sequence in a way that keeps
the GENETv3 MAC interface happy.

Finally, I observed a number of issues when manually configuring
the network interface of the older EPHYs that appear to be resolved
by the fourth commit.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/genet/bcmgenet.c

@@ -2018,6 +2018,8 @@ static void bcmgenet_link_intr_enable(struct bcmgenet_priv *priv)
 	 */
 	if (priv->internal_phy) {
 		int0_enable |= UMAC_IRQ_LINK_EVENT;
+		if (GENET_IS_V1(priv) || GENET_IS_V2(priv) || GENET_IS_V3(priv))
+			int0_enable |= UMAC_IRQ_PHY_DET_R;
 	} else if (priv->ext_phy) {
 		int0_enable |= UMAC_IRQ_LINK_EVENT;
 	} else if (priv->phy_interface == PHY_INTERFACE_MODE_MOCA) {
@@ -2611,11 +2613,14 @@ static void bcmgenet_irq_task(struct work_struct *work)
 	priv->irq0_stat = 0;
 	spin_unlock_irq(&priv->lock);
 
+	if (status & UMAC_IRQ_PHY_DET_R &&
+	    priv->dev->phydev->autoneg != AUTONEG_ENABLE)
+		phy_init_hw(priv->dev->phydev);
+
 	/* Link UP/DOWN event */
-	if (status & UMAC_IRQ_LINK_EVENT) {
-		priv->dev->phydev->link = !!(status & UMAC_IRQ_LINK_UP);
+	if (status & UMAC_IRQ_LINK_EVENT)
 		phy_mac_interrupt(priv->dev->phydev);
-	}
+
 }
 
 /* bcmgenet_isr1: handle Rx and Tx priority queues */
@@ -2710,7 +2715,7 @@ static irqreturn_t bcmgenet_isr0(int irq, void *dev_id)
 	}
 
 	/* all other interested interrupts handled in bottom half */
-	status &= UMAC_IRQ_LINK_EVENT;
+	status &= (UMAC_IRQ_LINK_EVENT | UMAC_IRQ_PHY_DET_R);
 	if (status) {
 		/* Save irq status for bottom-half processing. */
 		spin_lock_irqsave(&priv->lock, flags);
@@ -2874,6 +2879,12 @@ static int bcmgenet_open(struct net_device *dev)
 	if (priv->internal_phy)
 		bcmgenet_power_up(priv, GENET_POWER_PASSIVE);
 
+	ret = bcmgenet_mii_connect(dev);
+	if (ret) {
+		netdev_err(dev, "failed to connect to PHY\n");
+		goto err_clk_disable;
+	}
+
 	/* take MAC out of reset */
 	bcmgenet_umac_reset(priv);
 
@@ -2883,6 +2894,12 @@ static int bcmgenet_open(struct net_device *dev)
 	reg = bcmgenet_umac_readl(priv, UMAC_CMD);
 	priv->crc_fwd_en = !!(reg & CMD_CRC_FWD);
 
+	ret = bcmgenet_mii_config(dev, true);
+	if (ret) {
+		netdev_err(dev, "unsupported PHY\n");
+		goto err_disconnect_phy;
+	}
+
 	bcmgenet_set_hw_addr(priv, dev->dev_addr);
 
 	if (priv->internal_phy) {
@@ -2898,7 +2915,7 @@ static int bcmgenet_open(struct net_device *dev)
 	ret = bcmgenet_init_dma(priv);
 	if (ret) {
 		netdev_err(dev, "failed to initialize DMA\n");
-		goto err_clk_disable;
+		goto err_disconnect_phy;
 	}
 
 	/* Always enable ring 16 - descriptor ring */
@@ -2921,25 +2938,19 @@ static int bcmgenet_open(struct net_device *dev)
 		goto err_irq0;
 	}
 
-	ret = bcmgenet_mii_probe(dev);
-	if (ret) {
-		netdev_err(dev, "failed to connect to PHY\n");
-		goto err_irq1;
-	}
-
 	bcmgenet_netif_start(dev);
 
 	netif_tx_start_all_queues(dev);
 
 	return 0;
 
-err_irq1:
-	free_irq(priv->irq1, priv);
 err_irq0:
 	free_irq(priv->irq0, priv);
 err_fini_dma:
 	bcmgenet_dma_teardown(priv);
 	bcmgenet_fini_dma(priv);
+err_disconnect_phy:
+	phy_disconnect(dev->phydev);
 err_clk_disable:
 	if (priv->internal_phy)
 		bcmgenet_power_down(priv, GENET_POWER_PASSIVE);
@@ -3620,6 +3631,8 @@ static int bcmgenet_resume(struct device *d)
 	if (priv->internal_phy)
 		bcmgenet_power_up(priv, GENET_POWER_PASSIVE);
 
+	phy_init_hw(dev->phydev);
+
 	bcmgenet_umac_reset(priv);
 
 	init_umac(priv);
@@ -3628,8 +3641,6 @@ static int bcmgenet_resume(struct device *d)
 	if (priv->wolopts)
 		clk_disable_unprepare(priv->clk_wol);
 
-	phy_init_hw(dev->phydev);
-
 	/* Speed settings must be restored */
 	bcmgenet_mii_config(priv->dev, false);
 

drivers/net/ethernet/broadcom/genet/bcmgenet.h

@@ -720,8 +720,8 @@ GENET_IO_MACRO(rbuf, GENET_RBUF_OFF);
 
 /* MDIO routines */
 int bcmgenet_mii_init(struct net_device *dev);
+int bcmgenet_mii_connect(struct net_device *dev);
 int bcmgenet_mii_config(struct net_device *dev, bool init);
-int bcmgenet_mii_probe(struct net_device *dev);
 void bcmgenet_mii_exit(struct net_device *dev);
 void bcmgenet_phy_power_set(struct net_device *dev, bool enable);
 void bcmgenet_mii_setup(struct net_device *dev);

drivers/net/ethernet/broadcom/genet/bcmmii.c

@@ -173,6 +173,46 @@ static void bcmgenet_moca_phy_setup(struct bcmgenet_priv *priv)
 					  bcmgenet_fixed_phy_link_update);
 }
 
+int bcmgenet_mii_connect(struct net_device *dev)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	struct device_node *dn = priv->pdev->dev.of_node;
+	struct phy_device *phydev;
+	u32 phy_flags = 0;
+	int ret;
+
+	/* Communicate the integrated PHY revision */
+	if (priv->internal_phy)
+		phy_flags = priv->gphy_rev;
+
+	/* Initialize link state variables that bcmgenet_mii_setup() uses */
+	priv->old_link = -1;
+	priv->old_speed = -1;
+	priv->old_duplex = -1;
+	priv->old_pause = -1;
+
+	if (dn) {
+		phydev = of_phy_connect(dev, priv->phy_dn, bcmgenet_mii_setup,
+					phy_flags, priv->phy_interface);
+		if (!phydev) {
+			pr_err("could not attach to PHY\n");
+			return -ENODEV;
+		}
+	} else {
+		phydev = dev->phydev;
+		phydev->dev_flags = phy_flags;
+
+		ret = phy_connect_direct(dev, phydev, bcmgenet_mii_setup,
+					 priv->phy_interface);
+		if (ret) {
+			pr_err("could not attach to PHY\n");
+			return -ENODEV;
+		}
+	}
+
+	return 0;
+}
+
 int bcmgenet_mii_config(struct net_device *dev, bool init)
 {
 	struct bcmgenet_priv *priv = netdev_priv(dev);
@@ -266,60 +306,7 @@ int bcmgenet_mii_config(struct net_device *dev, bool init)
 		bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL);
 	}
 
-	if (init)
-		dev_info(kdev, "configuring instance for %s\n", phy_name);
-
-	return 0;
-}
-
-int bcmgenet_mii_probe(struct net_device *dev)
-{
-	struct bcmgenet_priv *priv = netdev_priv(dev);
-	struct device_node *dn = priv->pdev->dev.of_node;
-	struct phy_device *phydev;
-	u32 phy_flags = 0;
-	int ret;
-
-	/* Communicate the integrated PHY revision */
-	if (priv->internal_phy)
-		phy_flags = priv->gphy_rev;
-
-	/* Initialize link state variables that bcmgenet_mii_setup() uses */
-	priv->old_link = -1;
-	priv->old_speed = -1;
-	priv->old_duplex = -1;
-	priv->old_pause = -1;
-
-	if (dn) {
-		phydev = of_phy_connect(dev, priv->phy_dn, bcmgenet_mii_setup,
-					phy_flags, priv->phy_interface);
-		if (!phydev) {
-			pr_err("could not attach to PHY\n");
-			return -ENODEV;
-		}
-	} else {
-		phydev = dev->phydev;
-		phydev->dev_flags = phy_flags;
-
-		ret = phy_connect_direct(dev, phydev, bcmgenet_mii_setup,
-					 priv->phy_interface);
-		if (ret) {
-			pr_err("could not attach to PHY\n");
-			return -ENODEV;
-		}
-	}
-
-	/* Configure port multiplexer based on what the probed PHY device since
-	 * reading the 'max-speed' property determines the maximum supported
-	 * PHY speed which is needed for bcmgenet_mii_config() to configure
-	 * things appropriately.
-	 */
-	ret = bcmgenet_mii_config(dev, true);
-	if (ret) {
-		phy_disconnect(dev->phydev);
-		return ret;
-	}
-
+	if (init) {
 		linkmode_copy(phydev->advertising, phydev->supported);
 
 		/* The internal PHY has its link interrupts routed to the
@@ -329,7 +316,10 @@ int bcmgenet_mii_probe(struct net_device *dev)
 		 * those versions of GENET.
 		 */
 		if (priv->internal_phy && !GENET_IS_V5(priv))
-		dev->phydev->irq = PHY_IGNORE_INTERRUPT;
+			phydev->irq = PHY_IGNORE_INTERRUPT;
+
+		dev_info(kdev, "configuring instance for %s\n", phy_name);
+	}
 
 	return 0;
 }

drivers/net/phy/bcm7xxx.c

@@ -572,6 +572,7 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
 	.name           = _name,					\
 	/* PHY_BASIC_FEATURES */					\
 	.flags          = PHY_IS_INTERNAL,				\
+	.soft_reset	= genphy_soft_reset,				\
 	.config_init    = bcm7xxx_config_init,				\
 	.suspend        = bcm7xxx_suspend,				\
 	.resume         = bcm7xxx_config_init,				\