Commit 631eb227 authored by Ira W. Snyder's avatar Ira W. Snyder Committed by Samuel Ortiz

can: Add support for Janz VMOD-ICAN3 Intelligent CAN module

The Janz VMOD-ICAN3 is a MODULbus daughterboard which fits onto any
MODULbus carrier board. It is an intelligent CAN controller with a
microcontroller and associated firmware.
Signed-off-by: default avatarIra W. Snyder <iws@ovro.caltech.edu>
Acked-by: default avatarWolfgang Grandegger <wg@grandegger.com>
Acked-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarSamuel Ortiz <sameo@linux.intel.com>
parent bd358132
...@@ -63,6 +63,16 @@ config CAN_BFIN ...@@ -63,6 +63,16 @@ config CAN_BFIN
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
module will be called bfin_can. module will be called bfin_can.
config CAN_JANZ_ICAN3
tristate "Janz VMOD-ICAN3 Intelligent CAN controller"
depends on CAN_DEV && MFD_JANZ_CMODIO
---help---
Driver for Janz VMOD-ICAN3 Intelligent CAN controller module, which
connects to a MODULbus carrier board.
This driver can also be built as a module. If so, the module will be
called janz-ican3.ko.
source "drivers/net/can/mscan/Kconfig" source "drivers/net/can/mscan/Kconfig"
source "drivers/net/can/sja1000/Kconfig" source "drivers/net/can/sja1000/Kconfig"
......
...@@ -15,5 +15,6 @@ obj-$(CONFIG_CAN_AT91) += at91_can.o ...@@ -15,5 +15,6 @@ obj-$(CONFIG_CAN_AT91) += at91_can.o
obj-$(CONFIG_CAN_TI_HECC) += ti_hecc.o obj-$(CONFIG_CAN_TI_HECC) += ti_hecc.o
obj-$(CONFIG_CAN_MCP251X) += mcp251x.o obj-$(CONFIG_CAN_MCP251X) += mcp251x.o
obj-$(CONFIG_CAN_BFIN) += bfin_can.o obj-$(CONFIG_CAN_BFIN) += bfin_can.o
obj-$(CONFIG_CAN_JANZ_ICAN3) += janz-ican3.o
ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment