Commit 637beb69 authored by Dave Peterson's avatar Dave Peterson Committed by Linus Torvalds

[PATCH] EDAC: i82875p cleanup

- Fix i82875p_probe1() so it calls pci_get_device() instead of
  pci_find_device().
- Fix i82875p_probe1() so it cleans up properly on failure.
- Fix i82875p_init() so it cleans up properly on failure.
Signed-off-by: default avatarDavid S. Peterson <dsp@llnl.gov>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent e8a491b4
......@@ -289,7 +289,7 @@ static int i82875p_probe1(struct pci_dev *pdev, int dev_idx)
debugf0("%s()\n", __func__);
ovrfl_pdev = pci_find_device(PCI_VEND_DEV(INTEL, 82875_6), NULL);
ovrfl_pdev = pci_get_device(PCI_VEND_DEV(INTEL, 82875_6), NULL);
if (!ovrfl_pdev) {
/*
......@@ -302,26 +302,26 @@ static int i82875p_probe1(struct pci_dev *pdev, int dev_idx)
ovrfl_pdev =
pci_scan_single_device(pdev->bus, PCI_DEVFN(6, 0));
if (!ovrfl_pdev)
goto fail;
return -ENODEV;
}
#ifdef CONFIG_PROC_FS
if (!ovrfl_pdev->procent && pci_proc_attach_device(ovrfl_pdev)) {
i82875p_printk(KERN_ERR,
"%s(): Failed to attach overflow device\n",
__func__);
goto fail;
return -ENODEV;
}
#endif /* CONFIG_PROC_FS */
if (pci_enable_device(ovrfl_pdev)) {
i82875p_printk(KERN_ERR,
"%s(): Failed to enable overflow device\n",
__func__);
goto fail;
return -ENODEV;
}
if (pci_request_regions(ovrfl_pdev, pci_name(ovrfl_pdev))) {
#ifdef CORRECT_BIOS
goto fail;
goto fail0;
#endif
}
/* cache is irrelevant for PCI bus reads/writes */
......@@ -331,7 +331,7 @@ static int i82875p_probe1(struct pci_dev *pdev, int dev_idx)
if (!ovrfl_window) {
i82875p_printk(KERN_ERR, "%s(): Failed to ioremap bar6\n",
__func__);
goto fail;
goto fail1;
}
/* need to find out the number of channels */
......@@ -345,7 +345,7 @@ static int i82875p_probe1(struct pci_dev *pdev, int dev_idx)
if (!mci) {
rc = -ENOMEM;
goto fail;
goto fail2;
}
debugf3("%s(): init mci\n", __func__);
......@@ -402,25 +402,26 @@ static int i82875p_probe1(struct pci_dev *pdev, int dev_idx)
if (edac_mc_add_mc(mci)) {
debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
goto fail;
goto fail3;
}
/* get this far and it's successful */
debugf3("%s(): success\n", __func__);
return 0;
fail:
if (mci)
fail3:
edac_mc_free(mci);
if (ovrfl_window)
fail2:
iounmap(ovrfl_window);
if (ovrfl_pdev) {
fail1:
pci_release_regions(ovrfl_pdev);
pci_disable_device(ovrfl_pdev);
}
#ifdef CORRECT_BIOS
fail0:
#endif
pci_disable_device(ovrfl_pdev);
/* NOTE: the ovrfl proc entry and pci_dev are intentionally left */
return rc;
}
......@@ -497,24 +498,33 @@ static int __init i82875p_init(void)
debugf3("%s()\n", __func__);
pci_rc = pci_register_driver(&i82875p_driver);
if (pci_rc < 0)
return pci_rc;
goto fail0;
if (mci_pdev == NULL) {
i82875p_registered = 0;
mci_pdev =
pci_get_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82875_0, NULL);
if (!mci_pdev) {
debugf0("875p pci_get_device fail\n");
return -ENODEV;
pci_rc = -ENODEV;
goto fail1;
}
pci_rc = i82875p_init_one(mci_pdev, i82875p_pci_tbl);
if (pci_rc < 0) {
debugf0("875p init fail\n");
pci_dev_put(mci_pdev);
return -ENODEV;
pci_rc = -ENODEV;
goto fail1;
}
}
return 0;
fail1:
pci_unregister_driver(&i82875p_driver);
fail0:
if (mci_pdev != NULL)
pci_dev_put(mci_pdev);
return pci_rc;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment