Commit 63cb4e64 authored by Jani Nikula's avatar Jani Nikula

drm/i915/crt: split out intel_crt_present() to platform specific setup

With new platforms not having CRT support and most conditions in
intel_crt_present() being specific to DDI, split out the CRT
initialization to platform specific blocks in the if ladder. Add new
Pineview block for this.

This puts intel_crt_init() more in line with the rest of the outputs,
and makes it slightly easier for the uninitiated to figure out which
platforms actually have what.

v2: keep gen >= 9 check in intel_ddi_crt_present() (Ville)
Reviewed-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190122082307.4003-1-jani.nikula@intel.com
parent 85e2d61e
......@@ -14245,7 +14245,7 @@ static bool has_edp_a(struct drm_i915_private *dev_priv)
return true;
}
static bool intel_crt_present(struct drm_i915_private *dev_priv)
static bool intel_ddi_crt_present(struct drm_i915_private *dev_priv)
{
if (INTEL_GEN(dev_priv) >= 9)
return false;
......@@ -14253,15 +14253,12 @@ static bool intel_crt_present(struct drm_i915_private *dev_priv)
if (IS_HSW_ULT(dev_priv) || IS_BDW_ULT(dev_priv))
return false;
if (IS_CHERRYVIEW(dev_priv))
return false;
if (HAS_PCH_LPT_H(dev_priv) &&
I915_READ(SFUSE_STRAP) & SFUSE_STRAP_CRT_DISABLED)
return false;
/* DDI E can't be used if DDI A requires 4 lanes */
if (HAS_DDI(dev_priv) && I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES)
if (I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES)
return false;
if (!dev_priv->vbt.int_crt_support)
......@@ -14323,9 +14320,6 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
*/
intel_lvds_init(dev_priv);
if (intel_crt_present(dev_priv))
intel_crt_init(dev_priv);
if (IS_ICELAKE(dev_priv)) {
intel_ddi_init(dev_priv, PORT_A);
intel_ddi_init(dev_priv, PORT_B);
......@@ -14354,6 +14348,9 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
} else if (HAS_DDI(dev_priv)) {
int found;
if (intel_ddi_crt_present(dev_priv))
intel_crt_init(dev_priv);
/*
* Haswell uses DDI functions to detect digital outputs.
* On SKL pre-D0 the strap isn't connected, so we assume
......@@ -14385,6 +14382,10 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
} else if (HAS_PCH_SPLIT(dev_priv)) {
int found;
if (dev_priv->vbt.int_crt_support)
intel_crt_init(dev_priv);
dpd_is_edp = intel_dp_is_port_edp(dev_priv, PORT_D);
if (has_edp_a(dev_priv))
......@@ -14413,6 +14414,9 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
} else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
bool has_edp, has_port;
if (IS_VALLEYVIEW(dev_priv) && dev_priv->vbt.int_crt_support)
intel_crt_init(dev_priv);
/*
* The DP_DETECTED bit is the latched state of the DDC
* SDA pin at boot. However since eDP doesn't require DDC
......@@ -14455,9 +14459,15 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
}
vlv_dsi_init(dev_priv);
} else if (!IS_GEN(dev_priv, 2) && !IS_PINEVIEW(dev_priv)) {
} else if (IS_PINEVIEW(dev_priv)) {
if (dev_priv->vbt.int_crt_support)
intel_crt_init(dev_priv);
} else if (IS_GEN_RANGE(dev_priv, 3, 4)) {
bool found = false;
if (dev_priv->vbt.int_crt_support)
intel_crt_init(dev_priv);
if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
DRM_DEBUG_KMS("probing SDVOB\n");
found = intel_sdvo_init(dev_priv, GEN3_SDVOB, PORT_B);
......@@ -14489,8 +14499,12 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
if (IS_G4X(dev_priv) && (I915_READ(DP_D) & DP_DETECTED))
intel_dp_init(dev_priv, DP_D, PORT_D);
} else if (IS_GEN(dev_priv, 2))
} else if (IS_GEN(dev_priv, 2)) {
if (dev_priv->vbt.int_crt_support)
intel_crt_init(dev_priv);
intel_dvo_init(dev_priv);
}
if (SUPPORTS_TV(dev_priv))
intel_tv_init(dev_priv);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment