Skip to content

L
linux
Commit 647c9ae0 authored by Arend van Spriel's avatar Arend van Spriel Committed by John W. Linville
Browse files
Options

brcmfmac: replace WL_INFO() macro 

Get rid of WL_INFO() in favor of brcmf_dbg(INFO,...).
Reviewed-by: default avatarHante Meuleman <meuleman@broadcom.com>
Reviewed-by: default avatarPieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: default avatarArend van Spriel <arend@broadcom.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 57d6e91a
Show whitespace changes
Inline Side-by-side
Showing with 21 additions and 22 deletions
drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
View file @ 647c9ae0
......@@ -90,7 +90,7 @@
static bool check_vif_up(struct brcmf_cfg80211_vif *vif)
{
if (!test_bit(BRCMF_VIF_STATUS_READY, &vif->sme_state)) {
WL_INFO("device is not ready : status (%lu)\n",
brcmf_dbg(INFO, "device is not ready : status (%lu)\n",
vif->sme_state);
return false;
}
......@@ -477,7 +477,7 @@ brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev,
if (ap) {
set_bit(BRCMF_VIF_STATUS_AP_CREATING, &vif->sme_state);
WL_INFO("IF Type = AP\n");
brcmf_dbg(INFO, "IF Type = AP\n");
} else {
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_INFRA, infra);
if (err) {
......@@ -485,7 +485,7 @@ brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev,
err = -EAGAIN;
goto done;
}
WL_INFO("IF Type = %s\n", (vif->mode == WL_MODE_IBSS) ?
brcmf_dbg(INFO, "IF Type = %s\n", (vif->mode == WL_MODE_IBSS) ?
"Adhoc" : "Infra");
}
ndev->ieee80211_ptr->iftype = type;
......@@ -507,7 +507,7 @@ static void brcmf_set_mpc(struct net_device *ndev, int mpc)
brcmf_err("fail to set mpc\n");
return;
}
WL_INFO("MPC : %d\n", mpc);
brcmf_dbg(INFO, "MPC : %d\n", mpc);
}
}
......@@ -685,7 +685,7 @@ brcmf_run_escan(struct brcmf_cfg80211_info *cfg, struct net_device *ndev,
params, params_size);
if (err) {
if (err == -EBUSY)
WL_INFO("system busy : escan canceled\n");
brcmf_dbg(INFO, "system busy : escan canceled\n");
else
brcmf_err("error (%d)\n", err);
}
......@@ -804,7 +804,7 @@ brcmf_cfg80211_escan(struct wiphy *wiphy, struct net_device *ndev,
&sr->ssid_le, sizeof(sr->ssid_le));
if (err) {
if (err == -EBUSY)
WL_INFO("BUSY: scan for \"%s\" canceled\n",
brcmf_dbg(INFO, "BUSY: scan for \"%s\" canceled\n",
sr->ssid_le.SSID);
else
brcmf_err("WLC_SCAN error (%d)\n", err);
......@@ -966,7 +966,7 @@ static void brcmf_link_down(struct brcmf_cfg80211_vif *vif)
WL_TRACE("Enter\n");
if (test_bit(BRCMF_VIF_STATUS_CONNECTED, &vif->sme_state)) {
WL_INFO("Call WLC_DISASSOC to stop excess roaming\n ");
brcmf_dbg(INFO, "Call WLC_DISASSOC to stop excess roaming\n ");
err = brcmf_fil_cmd_data_set(vif->ifp,
BRCMF_C_DISASSOC, NULL, 0);
if (err)
......@@ -1425,7 +1425,7 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev,
} else
cfg->channel = 0;
WL_INFO("ie (%p), ie_len (%zd)\n", sme->ie, sme->ie_len);
brcmf_dbg(INFO, "ie (%p), ie_len (%zd)\n", sme->ie, sme->ie_len);
err = brcmf_set_wpa_version(ndev, sme);
if (err) {
......@@ -1889,7 +1889,7 @@ static s32
brcmf_cfg80211_config_default_mgmt_key(struct wiphy *wiphy,
struct net_device *ndev, u8 key_idx)
{
WL_INFO("Not supported\n");
brcmf_dbg(INFO, "Not supported\n");
return -EOPNOTSUPP;
}
......@@ -1989,12 +1989,12 @@ brcmf_cfg80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *ndev,
cfg->pwr_save = enabled;
if (!check_vif_up(ifp->vif)) {
WL_INFO("Device is not ready, storing the value in cfg_info struct\n");
brcmf_dbg(INFO, "Device is not ready, storing the value in cfg_info struct\n");
goto done;
}
pm = enabled ? PM_FAST : PM_OFF;
WL_INFO("power save %s\n", (pm ? "enabled" : "disabled"));
brcmf_dbg(INFO, "power save %s\n", (pm ? "enabled" : "disabled"));
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, pm);
if (err) {
......@@ -4351,7 +4351,7 @@ brcmf_dongle_roam(struct net_device *ndev, u32 roamvar, u32 bcn_timeout)
* Enable/Disable built-in roaming to allow supplicant
* to take care of roaming
*/
WL_INFO("Internal Roaming = %s\n", roamvar ? "Off" : "On");
brcmf_dbg(INFO, "Internal Roaming = %s\n", roamvar ? "Off" : "On");
err = brcmf_fil_iovar_int_set(ifp, "roam_off", roamvar);
if (err) {
brcmf_err("roam_off error (%d)\n", err);
......@@ -4391,7 +4391,7 @@ brcmf_dongle_scantime(struct net_device *ndev, s32 scan_assoc_time,
scan_assoc_time);
if (err) {
if (err == -EOPNOTSUPP)
WL_INFO("Scan assoc time is not supported\n");
brcmf_dbg(INFO, "Scan assoc time is not supported\n");
else
brcmf_err("Scan assoc time error (%d)\n", err);
goto dongle_scantime_out;
......@@ -4400,7 +4400,7 @@ brcmf_dongle_scantime(struct net_device *ndev, s32 scan_assoc_time,
scan_unassoc_time);
if (err) {
if (err == -EOPNOTSUPP)
WL_INFO("Scan unassoc time is not supported\n");
brcmf_dbg(INFO, "Scan unassoc time is not supported\n");
else
brcmf_err("Scan unassoc time error (%d)\n", err);
goto dongle_scantime_out;
......@@ -4410,7 +4410,7 @@ brcmf_dongle_scantime(struct net_device *ndev, s32 scan_assoc_time,
scan_passive_time);
if (err) {
if (err == -EOPNOTSUPP)
WL_INFO("Scan passive time is not supported\n");
brcmf_dbg(INFO, "Scan passive time is not supported\n");
else
brcmf_err("Scan passive time error (%d)\n", err);
goto dongle_scantime_out;
......@@ -4436,7 +4436,7 @@ static s32 wl_update_wiphybands(struct brcmf_cfg80211_info *cfg)
}
phy = ((char *)&phy_list)[0];
WL_INFO("%c phy\n", phy);
brcmf_dbg(INFO, "%c phy\n", phy);
if (phy == 'n' || phy == 'a') {
wiphy = cfg_to_wiphy(cfg);
wiphy->bands[IEEE80211_BAND_5GHZ] = &__wl_band_5ghz_n;
......@@ -4471,7 +4471,7 @@ static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg)
power_mode);
if (err)
goto default_conf_out;
WL_INFO("power save set to %s\n",
brcmf_dbg(INFO, "power save set to %s\n",
(power_mode ? "enabled" : "disabled"));
err = brcmf_dongle_roam(ndev, (cfg->roam_on ? 0 : 1),
......
drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h
View file @ 647c9ae0
......@@ -19,7 +19,6 @@
#include "dhd_dbg.h"
#define WL_INFO(fmt, ...) brcmf_dbg(INFO, fmt, ##__VA_ARGS__)
#define WL_TRACE(fmt, ...) brcmf_dbg(TRACE, fmt, ##__VA_ARGS__)
#define WL_SCAN(fmt, ...) brcmf_dbg(SCAN, fmt, ##__VA_ARGS__)
#define WL_CONN(fmt, ...) brcmf_dbg(CONN, fmt, ##__VA_ARGS__)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7