Merge branch 'master' of...

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

drivers/net/wireless/ath/ath9k/main.c

@@ -280,6 +280,10 @@ static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan)
 	if (r) {
 		ath_err(common,
 			"Unable to reset channel, reset status %d\n", r);
+
+		ath9k_hw_enable_interrupts(ah);
+		ath9k_queue_reset(sc, RESET_TYPE_BB_HANG);
+
 		goto out;
 	}
 

drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c

@@ -3317,15 +3317,15 @@ static int _brcmf_sdbrcm_download_firmware(struct brcmf_sdio *bus)
 		goto err;
 	}
 
-	/* External image takes precedence if specified */
 	if (brcmf_sdbrcm_download_code_file(bus)) {
 		brcmf_err("dongle image file download failed\n");
 		goto err;
 	}
 
-	/* External nvram takes precedence if specified */
-	if (brcmf_sdbrcm_download_nvram(bus))
+	if (brcmf_sdbrcm_download_nvram(bus)) {
 		brcmf_err("dongle nvram file download failed\n");
+		goto err;
+	}
 
 	/* Take arm out of reset */
 	if (brcmf_sdbrcm_download_state(bus, false)) {

drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c

@@ -1891,8 +1891,10 @@ static s32
 brcmf_add_keyext(struct wiphy *wiphy, struct net_device *ndev,
 	      u8 key_idx, const u8 *mac_addr, struct key_params *params)
 {
+	struct brcmf_if *ifp = netdev_priv(ndev);
 	struct brcmf_wsec_key key;
 	s32 err = 0;
+	u8 keybuf[8];
 
 	memset(&key, 0, sizeof(key));
 	key.index = (u32) key_idx;
@@ -1916,8 +1918,9 @@ brcmf_add_keyext(struct wiphy *wiphy, struct net_device *ndev,
 		brcmf_dbg(CONN, "Setting the key index %d\n", key.index);
 		memcpy(key.data, params->key, key.len);
 
-		if (params->cipher == WLAN_CIPHER_SUITE_TKIP) {
-			u8 keybuf[8];
+		if ((ifp->vif->mode != WL_MODE_AP) &&
+		    (params->cipher == WLAN_CIPHER_SUITE_TKIP)) {
+			brcmf_dbg(CONN, "Swapping RX/TX MIC key\n");
 			memcpy(keybuf, &key.data[24], sizeof(keybuf));
 			memcpy(&key.data[24], &key.data[16], sizeof(keybuf));
 			memcpy(&key.data[16], keybuf, sizeof(keybuf));
@@ -2013,7 +2016,7 @@ brcmf_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
 		break;
 	case WLAN_CIPHER_SUITE_TKIP:
 		if (ifp->vif->mode != WL_MODE_AP) {
-			brcmf_dbg(CONN, "Swapping key\n");
+			brcmf_dbg(CONN, "Swapping RX/TX MIC key\n");
 			memcpy(keybuf, &key.data[24], sizeof(keybuf));
 			memcpy(&key.data[24], &key.data[16], sizeof(keybuf));
 			memcpy(&key.data[16], keybuf, sizeof(keybuf));
@@ -2118,8 +2121,7 @@ brcmf_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev,
 		err = -EAGAIN;
 		goto done;
 	}
-	switch (wsec & ~SES_OW_ENABLED) {
-	case WEP_ENABLED:
+	if (wsec & WEP_ENABLED) {
 		sec = &profile->sec;
 		if (sec->cipher_pairwise & WLAN_CIPHER_SUITE_WEP40) {
 			params.cipher = WLAN_CIPHER_SUITE_WEP40;
@@ -2128,16 +2130,13 @@ brcmf_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev,
 			params.cipher = WLAN_CIPHER_SUITE_WEP104;
 			brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_WEP104\n");
 		}
-		break;
-	case TKIP_ENABLED:
+	} else if (wsec & TKIP_ENABLED) {
 		params.cipher = WLAN_CIPHER_SUITE_TKIP;
 		brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_TKIP\n");
-		break;
-	case AES_ENABLED:
+	} else if (wsec & AES_ENABLED) {
 		params.cipher = WLAN_CIPHER_SUITE_AES_CMAC;
 		brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_AES_CMAC\n");
-		break;
-	default:
+	} else  {
 		brcmf_err("Invalid algo (0x%x)\n", wsec);
 		err = -EINVAL;
 		goto done;
@@ -3824,8 +3823,9 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev,
 static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev)
 {
 	struct brcmf_if *ifp = netdev_priv(ndev);
-	s32 err = -EPERM;
+	s32 err;
 	struct brcmf_fil_bss_enable_le bss_enable;
+	struct brcmf_join_params join_params;
 
 	brcmf_dbg(TRACE, "Enter\n");
 
@@ -3833,16 +3833,21 @@ static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev)
 		/* Due to most likely deauths outstanding we sleep */
 		/* first to make sure they get processed by fw. */
 		msleep(400);
-		err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_AP, 0);
-		if (err < 0) {
-			brcmf_err("setting AP mode failed %d\n", err);
-			goto exit;
-		}
+
+		memset(&join_params, 0, sizeof(join_params));
+		err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID,
+					     &join_params, sizeof(join_params));
+		if (err < 0)
+			brcmf_err("SET SSID error (%d)\n", err);
 		err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 0);
-		if (err < 0) {
+		if (err < 0)
 			brcmf_err("BRCMF_C_UP error %d\n", err);
-			goto exit;
-		}
+		err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_AP, 0);
+		if (err < 0)
+			brcmf_err("setting AP mode failed %d\n", err);
+		err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_INFRA, 0);
+		if (err < 0)
+			brcmf_err("setting INFRA mode failed %d\n", err);
 	} else {
 		bss_enable.bsscfg_idx = cpu_to_le32(ifp->bssidx);
 		bss_enable.enable = cpu_to_le32(0);
@@ -3855,7 +3860,6 @@ static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev)
 	set_bit(BRCMF_VIF_STATUS_AP_CREATING, &ifp->vif->sme_state);
 	clear_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state);
 
-exit:
 	return err;
 }
 

drivers/net/wireless/mwifiex/scan.c

@@ -1393,8 +1393,10 @@ int mwifiex_scan_networks(struct mwifiex_private *priv,
 			queue_work(adapter->workqueue, &adapter->main_work);
 
 			/* Perform internal scan synchronously */
-			if (!priv->scan_request)
+			if (!priv->scan_request) {
+				dev_dbg(adapter->dev, "wait internal scan\n");
 				mwifiex_wait_queue_complete(adapter, cmd_node);
+			}
 		} else {
 			spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
 					       flags);
@@ -1793,7 +1795,12 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv,
 		/* Need to indicate IOCTL complete */
 		if (adapter->curr_cmd->wait_q_enabled) {
 			adapter->cmd_wait_q.status = 0;
-			mwifiex_complete_cmd(adapter, adapter->curr_cmd);
+			if (!priv->scan_request) {
+				dev_dbg(adapter->dev,
+					"complete internal scan\n");
+				mwifiex_complete_cmd(adapter,
+						     adapter->curr_cmd);
+			}
 		}
 		if (priv->report_scan_result)
 			priv->report_scan_result = false;

drivers/net/wireless/rt2x00/Kconfig

@@ -20,6 +20,7 @@ if RT2X00
 config RT2400PCI
 	tristate "Ralink rt2400 (PCI/PCMCIA) support"
 	depends on PCI
+	select RT2X00_LIB_MMIO
 	select RT2X00_LIB_PCI
 	select EEPROM_93CX6
 	---help---
@@ -31,6 +32,7 @@ config RT2400PCI
 config RT2500PCI
 	tristate "Ralink rt2500 (PCI/PCMCIA) support"
 	depends on PCI
+	select RT2X00_LIB_MMIO
 	select RT2X00_LIB_PCI
 	select EEPROM_93CX6
 	---help---
@@ -43,6 +45,7 @@ config RT61PCI
 	tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support"
 	depends on PCI
 	select RT2X00_LIB_PCI
+	select RT2X00_LIB_MMIO
 	select RT2X00_LIB_FIRMWARE
 	select RT2X00_LIB_CRYPTO
 	select CRC_ITU_T
@@ -57,6 +60,7 @@ config RT2800PCI
 	tristate "Ralink rt27xx/rt28xx/rt30xx (PCI/PCIe/PCMCIA) support"
 	depends on PCI || SOC_RT288X || SOC_RT305X
 	select RT2800_LIB
+	select RT2X00_LIB_MMIO
 	select RT2X00_LIB_PCI if PCI
 	select RT2X00_LIB_SOC if SOC_RT288X || SOC_RT305X
 	select RT2X00_LIB_FIRMWARE
@@ -185,6 +189,9 @@ endif
 config RT2800_LIB
 	tristate
 
+config RT2X00_LIB_MMIO
+	tristate
+
 config RT2X00_LIB_PCI
 	tristate
 	select RT2X00_LIB

drivers/net/wireless/rt2x00/Makefile

@@ -9,6 +9,7 @@ rt2x00lib-$(CONFIG_RT2X00_LIB_FIRMWARE)	+= rt2x00firmware.o
 rt2x00lib-$(CONFIG_RT2X00_LIB_LEDS)	+= rt2x00leds.o
 
 obj-$(CONFIG_RT2X00_LIB)		+= rt2x00lib.o
+obj-$(CONFIG_RT2X00_LIB_MMIO)		+= rt2x00mmio.o
 obj-$(CONFIG_RT2X00_LIB_PCI)		+= rt2x00pci.o
 obj-$(CONFIG_RT2X00_LIB_SOC)		+= rt2x00soc.o
 obj-$(CONFIG_RT2X00_LIB_USB)		+= rt2x00usb.o

drivers/net/wireless/rt2x00/rt2400pci.c

@@ -34,6 +34,7 @@
 #include <linux/slab.h>
 
 #include "rt2x00.h"
+#include "rt2x00mmio.h"
 #include "rt2x00pci.h"
 #include "rt2400pci.h"
 

drivers/net/wireless/rt2x00/rt2500pci.c

@@ -34,6 +34,7 @@
 #include <linux/slab.h>
 
 #include "rt2x00.h"
+#include "rt2x00mmio.h"
 #include "rt2x00pci.h"
 #include "rt2500pci.h"
 

drivers/net/wireless/rt2x00/rt2800pci.c

@@ -41,6 +41,7 @@
 #include <linux/eeprom_93cx6.h>
 
 #include "rt2x00.h"
+#include "rt2x00mmio.h"
 #include "rt2x00pci.h"
 #include "rt2x00soc.h"
 #include "rt2800lib.h"

drivers/net/wireless/rt2x00/rt2x00mmio.c

+/*
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
+	<http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: rt2x00mmio
+	Abstract: rt2x00 generic mmio device routines.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "rt2x00.h"
+#include "rt2x00mmio.h"
+
+/*
+ * Register access.
+ */
+int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev,
+			   const unsigned int offset,
+			   const struct rt2x00_field32 field,
+			   u32 *reg)
+{
+	unsigned int i;
+
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+		return 0;
+
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2x00pci_register_read(rt2x00dev, offset, reg);
+		if (!rt2x00_get_field32(*reg, field))
+			return 1;
+		udelay(REGISTER_BUSY_DELAY);
+	}
+
+	printk_once(KERN_ERR "%s() Indirect register access failed: "
+	      "offset=0x%.08x, value=0x%.08x\n", __func__, offset, *reg);
+	*reg = ~0;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rt2x00pci_regbusy_read);
+
+bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev)
+{
+	struct data_queue *queue = rt2x00dev->rx;
+	struct queue_entry *entry;
+	struct queue_entry_priv_pci *entry_priv;
+	struct skb_frame_desc *skbdesc;
+	int max_rx = 16;
+
+	while (--max_rx) {
+		entry = rt2x00queue_get_entry(queue, Q_INDEX);
+		entry_priv = entry->priv_data;
+
+		if (rt2x00dev->ops->lib->get_entry_state(entry))
+			break;
+
+		/*
+		 * Fill in desc fields of the skb descriptor
+		 */
+		skbdesc = get_skb_frame_desc(entry->skb);
+		skbdesc->desc = entry_priv->desc;
+		skbdesc->desc_len = entry->queue->desc_size;
+
+		/*
+		 * DMA is already done, notify rt2x00lib that
+		 * it finished successfully.
+		 */
+		rt2x00lib_dmastart(entry);
+		rt2x00lib_dmadone(entry);
+
+		/*
+		 * Send the frame to rt2x00lib for further processing.
+		 */
+		rt2x00lib_rxdone(entry, GFP_ATOMIC);
+	}
+
+	return !max_rx;
+}
+EXPORT_SYMBOL_GPL(rt2x00pci_rxdone);
+
+void rt2x00pci_flush_queue(struct data_queue *queue, bool drop)
+{
+	unsigned int i;
+
+	for (i = 0; !rt2x00queue_empty(queue) && i < 10; i++)
+		msleep(10);
+}
+EXPORT_SYMBOL_GPL(rt2x00pci_flush_queue);
+
+/*
+ * Device initialization handlers.
+ */
+static int rt2x00pci_alloc_queue_dma(struct rt2x00_dev *rt2x00dev,
+				     struct data_queue *queue)
+{
+	struct queue_entry_priv_pci *entry_priv;
+	void *addr;
+	dma_addr_t dma;
+	unsigned int i;
+
+	/*
+	 * Allocate DMA memory for descriptor and buffer.
+	 */
+	addr = dma_alloc_coherent(rt2x00dev->dev,
+				  queue->limit * queue->desc_size,
+				  &dma, GFP_KERNEL);
+	if (!addr)
+		return -ENOMEM;
+
+	memset(addr, 0, queue->limit * queue->desc_size);
+
+	/*
+	 * Initialize all queue entries to contain valid addresses.
+	 */
+	for (i = 0; i < queue->limit; i++) {
+		entry_priv = queue->entries[i].priv_data;
+		entry_priv->desc = addr + i * queue->desc_size;
+		entry_priv->desc_dma = dma + i * queue->desc_size;
+	}
+
+	return 0;
+}
+
+static void rt2x00pci_free_queue_dma(struct rt2x00_dev *rt2x00dev,
+				     struct data_queue *queue)
+{
+	struct queue_entry_priv_pci *entry_priv =
+	    queue->entries[0].priv_data;
+
+	if (entry_priv->desc)
+		dma_free_coherent(rt2x00dev->dev,
+				  queue->limit * queue->desc_size,
+				  entry_priv->desc, entry_priv->desc_dma);
+	entry_priv->desc = NULL;
+}
+
+int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev)
+{
+	struct data_queue *queue;
+	int status;
+
+	/*
+	 * Allocate DMA
+	 */
+	queue_for_each(rt2x00dev, queue) {
+		status = rt2x00pci_alloc_queue_dma(rt2x00dev, queue);
+		if (status)
+			goto exit;
+	}
+
+	/*
+	 * Register interrupt handler.
+	 */
+	status = request_irq(rt2x00dev->irq,
+			     rt2x00dev->ops->lib->irq_handler,
+			     IRQF_SHARED, rt2x00dev->name, rt2x00dev);
+	if (status) {
+		ERROR(rt2x00dev, "IRQ %d allocation failed (error %d).\n",
+		      rt2x00dev->irq, status);
+		goto exit;
+	}
+
+	return 0;
+
+exit:
+	queue_for_each(rt2x00dev, queue)
+		rt2x00pci_free_queue_dma(rt2x00dev, queue);
+
+	return status;
+}
+EXPORT_SYMBOL_GPL(rt2x00pci_initialize);
+
+void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev)
+{
+	struct data_queue *queue;
+
+	/*
+	 * Free irq line.
+	 */
+	free_irq(rt2x00dev->irq, rt2x00dev);
+
+	/*
+	 * Free DMA
+	 */
+	queue_for_each(rt2x00dev, queue)
+		rt2x00pci_free_queue_dma(rt2x00dev, queue);
+}
+EXPORT_SYMBOL_GPL(rt2x00pci_uninitialize);
+
+/*
+ * rt2x00mmio module information.
+ */
+MODULE_AUTHOR(DRV_PROJECT);
+MODULE_VERSION(DRV_VERSION);
+MODULE_DESCRIPTION("rt2x00 mmio library");
+MODULE_LICENSE("GPL");

drivers/net/wireless/rt2x00/rt2x00mmio.h

+/*
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
+	<http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: rt2x00mmio
+	Abstract: Data structures for the rt2x00mmio module.
+ */
+
+#ifndef RT2X00MMIO_H
+#define RT2X00MMIO_H
+
+#include <linux/io.h>
+
+/*
+ * Register access.
+ */
+static inline void rt2x00pci_register_read(struct rt2x00_dev *rt2x00dev,
+					   const unsigned int offset,
+					   u32 *value)
+{
+	*value = readl(rt2x00dev->csr.base + offset);
+}
+
+static inline void rt2x00pci_register_multiread(struct rt2x00_dev *rt2x00dev,
+						const unsigned int offset,
+						void *value, const u32 length)
+{
+	memcpy_fromio(value, rt2x00dev->csr.base + offset, length);
+}
+
+static inline void rt2x00pci_register_write(struct rt2x00_dev *rt2x00dev,
+					    const unsigned int offset,
+					    u32 value)
+{
+	writel(value, rt2x00dev->csr.base + offset);
+}
+
+static inline void rt2x00pci_register_multiwrite(struct rt2x00_dev *rt2x00dev,
+						 const unsigned int offset,
+						 const void *value,
+						 const u32 length)
+{
+	__iowrite32_copy(rt2x00dev->csr.base + offset, value, length >> 2);
+}
+
+/**
+ * rt2x00pci_regbusy_read - Read from register with busy check
+ * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
+ * @offset: Register offset
+ * @field: Field to check if register is busy
+ * @reg: Pointer to where register contents should be stored
+ *
+ * This function will read the given register, and checks if the
+ * register is busy. If it is, it will sleep for a couple of
+ * microseconds before reading the register again. If the register
+ * is not read after a certain timeout, this function will return
+ * FALSE.
+ */
+int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev,
+			   const unsigned int offset,
+			   const struct rt2x00_field32 field,
+			   u32 *reg);
+
+/**
+ * struct queue_entry_priv_pci: Per entry PCI specific information
+ *
+ * @desc: Pointer to device descriptor
+ * @desc_dma: DMA pointer to &desc.
+ * @data: Pointer to device's entry memory.
+ * @data_dma: DMA pointer to &data.
+ */
+struct queue_entry_priv_pci {
+	__le32 *desc;
+	dma_addr_t desc_dma;
+};
+
+/**
+ * rt2x00pci_rxdone - Handle RX done events
+ * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
+ *
+ * Returns true if there are still rx frames pending and false if all
+ * pending rx frames were processed.
+ */
+bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev);
+
+/**
+ * rt2x00pci_flush_queue - Flush data queue
+ * @queue: Data queue to stop
+ * @drop: True to drop all pending frames.
+ *
+ * This will wait for a maximum of 100ms, waiting for the queues
+ * to become empty.
+ */
+void rt2x00pci_flush_queue(struct data_queue *queue, bool drop);
+
+/*
+ * Device initialization handlers.
+ */
+int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev);
+void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev);
+
+#endif /* RT2X00MMIO_H */

drivers/net/wireless/rt2x00/rt2x00pci.c

@@ -32,182 +32,6 @@
 #include "rt2x00.h"
 #include "rt2x00pci.h"
 
-/*
- * Register access.
- */
-int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev,
-			   const unsigned int offset,
-			   const struct rt2x00_field32 field,
-			   u32 *reg)
-{
-	unsigned int i;
-
-	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
-		return 0;
-
-	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2x00pci_register_read(rt2x00dev, offset, reg);
-		if (!rt2x00_get_field32(*reg, field))
-			return 1;
-		udelay(REGISTER_BUSY_DELAY);
-	}
-
-	ERROR(rt2x00dev, "Indirect register access failed: "
-	      "offset=0x%.08x, value=0x%.08x\n", offset, *reg);
-	*reg = ~0;
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(rt2x00pci_regbusy_read);
-
-bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev)
-{
-	struct data_queue *queue = rt2x00dev->rx;
-	struct queue_entry *entry;
-	struct queue_entry_priv_pci *entry_priv;
-	struct skb_frame_desc *skbdesc;
-	int max_rx = 16;
-
-	while (--max_rx) {
-		entry = rt2x00queue_get_entry(queue, Q_INDEX);
-		entry_priv = entry->priv_data;
-
-		if (rt2x00dev->ops->lib->get_entry_state(entry))
-			break;
-
-		/*
-		 * Fill in desc fields of the skb descriptor
-		 */
-		skbdesc = get_skb_frame_desc(entry->skb);
-		skbdesc->desc = entry_priv->desc;
-		skbdesc->desc_len = entry->queue->desc_size;
-
-		/*
-		 * DMA is already done, notify rt2x00lib that
-		 * it finished successfully.
-		 */
-		rt2x00lib_dmastart(entry);
-		rt2x00lib_dmadone(entry);
-
-		/*
-		 * Send the frame to rt2x00lib for further processing.
-		 */
-		rt2x00lib_rxdone(entry, GFP_ATOMIC);
-	}
-
-	return !max_rx;
-}
-EXPORT_SYMBOL_GPL(rt2x00pci_rxdone);
-
-void rt2x00pci_flush_queue(struct data_queue *queue, bool drop)
-{
-	unsigned int i;
-
-	for (i = 0; !rt2x00queue_empty(queue) && i < 10; i++)
-		msleep(10);
-}
-EXPORT_SYMBOL_GPL(rt2x00pci_flush_queue);
-
-/*
- * Device initialization handlers.
- */
-static int rt2x00pci_alloc_queue_dma(struct rt2x00_dev *rt2x00dev,
-				     struct data_queue *queue)
-{
-	struct queue_entry_priv_pci *entry_priv;
-	void *addr;
-	dma_addr_t dma;
-	unsigned int i;
-
-	/*
-	 * Allocate DMA memory for descriptor and buffer.
-	 */
-	addr = dma_alloc_coherent(rt2x00dev->dev,
-				  queue->limit * queue->desc_size,
-				  &dma, GFP_KERNEL);
-	if (!addr)
-		return -ENOMEM;
-
-	memset(addr, 0, queue->limit * queue->desc_size);
-
-	/*
-	 * Initialize all queue entries to contain valid addresses.
-	 */
-	for (i = 0; i < queue->limit; i++) {
-		entry_priv = queue->entries[i].priv_data;
-		entry_priv->desc = addr + i * queue->desc_size;
-		entry_priv->desc_dma = dma + i * queue->desc_size;
-	}
-
-	return 0;
-}
-
-static void rt2x00pci_free_queue_dma(struct rt2x00_dev *rt2x00dev,
-				     struct data_queue *queue)
-{
-	struct queue_entry_priv_pci *entry_priv =
-	    queue->entries[0].priv_data;
-
-	if (entry_priv->desc)
-		dma_free_coherent(rt2x00dev->dev,
-				  queue->limit * queue->desc_size,
-				  entry_priv->desc, entry_priv->desc_dma);
-	entry_priv->desc = NULL;
-}
-
-int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev)
-{
-	struct data_queue *queue;
-	int status;
-
-	/*
-	 * Allocate DMA
-	 */
-	queue_for_each(rt2x00dev, queue) {
-		status = rt2x00pci_alloc_queue_dma(rt2x00dev, queue);
-		if (status)
-			goto exit;
-	}
-
-	/*
-	 * Register interrupt handler.
-	 */
-	status = request_irq(rt2x00dev->irq,
-			     rt2x00dev->ops->lib->irq_handler,
-			     IRQF_SHARED, rt2x00dev->name, rt2x00dev);
-	if (status) {
-		ERROR(rt2x00dev, "IRQ %d allocation failed (error %d).\n",
-		      rt2x00dev->irq, status);
-		goto exit;
-	}
-
-	return 0;
-
-exit:
-	queue_for_each(rt2x00dev, queue)
-		rt2x00pci_free_queue_dma(rt2x00dev, queue);
-
-	return status;
-}
-EXPORT_SYMBOL_GPL(rt2x00pci_initialize);
-
-void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev)
-{
-	struct data_queue *queue;
-
-	/*
-	 * Free irq line.
-	 */
-	free_irq(rt2x00dev->irq, rt2x00dev);
-
-	/*
-	 * Free DMA
-	 */
-	queue_for_each(rt2x00dev, queue)
-		rt2x00pci_free_queue_dma(rt2x00dev, queue);
-}
-EXPORT_SYMBOL_GPL(rt2x00pci_uninitialize);
-
 /*
  * PCI driver handlers.
  */

drivers/net/wireless/rt2x00/rt2x00pci.h

@@ -35,94 +35,6 @@
  */
 #define PCI_DEVICE_DATA(__ops)	.driver_data = (kernel_ulong_t)(__ops)
 
-/*
- * Register access.
- */
-static inline void rt2x00pci_register_read(struct rt2x00_dev *rt2x00dev,
-					   const unsigned int offset,
-					   u32 *value)
-{
-	*value = readl(rt2x00dev->csr.base + offset);
-}
-
-static inline void rt2x00pci_register_multiread(struct rt2x00_dev *rt2x00dev,
-						const unsigned int offset,
-						void *value, const u32 length)
-{
-	memcpy_fromio(value, rt2x00dev->csr.base + offset, length);
-}
-
-static inline void rt2x00pci_register_write(struct rt2x00_dev *rt2x00dev,
-					    const unsigned int offset,
-					    u32 value)
-{
-	writel(value, rt2x00dev->csr.base + offset);
-}
-
-static inline void rt2x00pci_register_multiwrite(struct rt2x00_dev *rt2x00dev,
-						 const unsigned int offset,
-						 const void *value,
-						 const u32 length)
-{
-	__iowrite32_copy(rt2x00dev->csr.base + offset, value, length >> 2);
-}
-
-/**
- * rt2x00pci_regbusy_read - Read from register with busy check
- * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
- * @offset: Register offset
- * @field: Field to check if register is busy
- * @reg: Pointer to where register contents should be stored
- *
- * This function will read the given register, and checks if the
- * register is busy. If it is, it will sleep for a couple of
- * microseconds before reading the register again. If the register
- * is not read after a certain timeout, this function will return
- * FALSE.
- */
-int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev,
-			   const unsigned int offset,
-			   const struct rt2x00_field32 field,
-			   u32 *reg);
-
-/**
- * struct queue_entry_priv_pci: Per entry PCI specific information
- *
- * @desc: Pointer to device descriptor
- * @desc_dma: DMA pointer to &desc.
- * @data: Pointer to device's entry memory.
- * @data_dma: DMA pointer to &data.
- */
-struct queue_entry_priv_pci {
-	__le32 *desc;
-	dma_addr_t desc_dma;
-};
-
-/**
- * rt2x00pci_rxdone - Handle RX done events
- * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
- *
- * Returns true if there are still rx frames pending and false if all
- * pending rx frames were processed.
- */
-bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev);
-
-/**
- * rt2x00pci_flush_queue - Flush data queue
- * @queue: Data queue to stop
- * @drop: True to drop all pending frames.
- *
- * This will wait for a maximum of 100ms, waiting for the queues
- * to become empty.
- */
-void rt2x00pci_flush_queue(struct data_queue *queue, bool drop);
-
-/*
- * Device initialization handlers.
- */
-int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev);
-void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev);
-
 /*
  * PCI driver handlers.
  */

drivers/net/wireless/rt2x00/rt61pci.c

@@ -35,6 +35,7 @@
 #include <linux/eeprom_93cx6.h>
 
 #include "rt2x00.h"
+#include "rt2x00mmio.h"
 #include "rt2x00pci.h"
 #include "rt61pci.h"
 

net/wireless/sme.c

@@ -224,6 +224,7 @@ void cfg80211_conn_work(struct work_struct *work)
 	rtnl_lock();
 	cfg80211_lock_rdev(rdev);
 	mutex_lock(&rdev->devlist_mtx);
+	mutex_lock(&rdev->sched_scan_mtx);
 
 	list_for_each_entry(wdev, &rdev->wdev_list, list) {
 		wdev_lock(wdev);
@@ -248,6 +249,7 @@ void cfg80211_conn_work(struct work_struct *work)
 		wdev_unlock(wdev);
 	}
 
+	mutex_unlock(&rdev->sched_scan_mtx);
 	mutex_unlock(&rdev->devlist_mtx);
 	cfg80211_unlock_rdev(rdev);
 	rtnl_unlock();