[POWERPC] 83xx: Add the MPC8315E RDB dts

Add the dts for the MPC8315E Reference Development Board (RDB).

The board is a mini-ITX reference board with 128M DDR2, 8M flash,
32M NAND, USB, PCI, gigabit ethernet, SATA, and serial.
Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

arch/powerpc/boot/dts/mpc8315erdb.dts

+/*
+ * MPC8315E RDB Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "fsl,mpc8315erdb";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8315@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <16384>;
+			i-cache-size = <16384>;
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;	// 128MB at 0
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 8>;
+		interrupt-parent = <&ipic>;
+
+		// CS0 and CS1 are swapped when
+		// booting from nand, but the
+		// addresses are the same.
+		ranges = <0 0 0xfe000000 0x00800000
+		          1 0 0xe0600000 0x00002000
+		          2 0 0xf0000000 0x00020000
+		          3 0 0xfa000000 0x00008000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0 0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8315-fcm-nand",
+			             "fsl,elbc-fcm-nand";
+			reg = <1 0 0x2000>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			kernel@100000 {
+				reg = <0x100000 0x300000>;
+			};
+			fs@400000 {
+				reg = <0x400000 0x1c00000>;
+			};
+		};
+	};
+
+	immr@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 8>;
+			interrupt-parent = < &ipic >;
+			dfsrr;
+			rtc@68 {
+				device_type = "rtc";
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 8>;
+			interrupt-parent = < &ipic >;
+			mode = "cpu";
+		};
+
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = < &ipic >;
+			interrupts = <38 8>;
+			phy_type = "utmi";
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+			phy0: ethernet-phy@0 {
+				interrupt-parent = < &ipic >;
+				interrupts = <20 8>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			phy1: ethernet-phy@1 {
+				interrupt-parent = < &ipic >;
+				interrupts = <19 8>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		enet0: ethernet@24000 {
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 8 33 8 34 8>;
+			interrupt-parent = < &ipic >;
+			phy-handle = < &phy0 >;
+		};
+
+		enet1: ethernet@25000 {
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 8 36 8 37 8>;
+			interrupt-parent = < &ipic >;
+			phy-handle = < &phy1 >;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <9 8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <10 8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		crypto@30000 {
+			model = "SEC3";
+			device_type = "crypto";
+			compatible = "talitos";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 8>;
+			interrupt-parent = < &ipic >;
+			/* Rev. 3.0 geometry */
+			num-channels = <4>;
+			channel-fifo-len = <24>;
+			exec-units-mask = <0x000001fe>;
+			descriptor-types-mask = <0x03ab0ebf>;
+		};
+
+		sata@18000 {
+			compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
+			reg = <0x18000 0x1000>;
+			cell-index = <1>;
+			interrupts = <44 8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		sata@19000 {
+			compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
+			reg = <0x19000 0x1000>;
+			cell-index = <2>;
+			interrupts = <45 8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: interrupt-controller@700 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+	};
+
+	pci0: pci@e0008500 {
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+				/* IDSEL 0x0E -mini PCI */
+				 0x7000 0 0 1 &ipic 18 8
+				 0x7000 0 0 2 &ipic 18 8
+				 0x7000 0 0 3 &ipic 18 8
+				 0x7000 0 0 4 &ipic 18 8
+
+				/* IDSEL 0x0F -mini PCI */
+				 0x7800 0 0 1 &ipic 17 8
+				 0x7800 0 0 2 &ipic 17 8
+				 0x7800 0 0 3 &ipic 17 8
+				 0x7800 0 0 4 &ipic 17 8
+
+				/* IDSEL 0x10 - PCI slot */
+				 0x8000 0 0 1 &ipic 48 8
+				 0x8000 0 0 2 &ipic 17 8
+				 0x8000 0 0 3 &ipic 48 8
+				 0x8000 0 0 4 &ipic 17 8>;
+		interrupt-parent = < &ipic >;
+		interrupts = <66 8>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x42000000 0 0x80000000 0x80000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xe0300000 0 0x00100000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100>;
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
+};