Merge nuts.ninka.net:/home/davem/src/BK/sparcwork-2.5

into nuts.ninka.net:/home/davem/src/BK/sparc-2.5

arch/alpha/Makefile

@@ -12,7 +12,7 @@ NM := $(NM) -B
 
 LDFLAGS_vmlinux = -static -N #-relax
 CFLAGS := $(CFLAGS) -pipe -mno-fp-regs -ffixed-8
-ARCHBLOBLFLAGS := -I binary -O elf64-alpha -B alpha
+LDFLAGS_BLOB := --format binary --oformat elf64-alpha
 
 # Determine if we can use the BWX instructions with GAS.
 old_gas := $(shell if $(AS) --version 2>&1 | grep 'version 2.7' > /dev/null; then echo y; else echo n; fi)

arch/alpha/vmlinux.lds.S

@@ -69,7 +69,7 @@ SECTIONS
 
   .init.ramfs ALIGN(8192): {
 	__initramfs_start = .;
-	*(.init.initramfs)
+	*(.init.ramfs)
 	__initramfs_end = .;
   }
 

arch/i386/Kconfig

@@ -337,7 +337,6 @@ config PREEMPT
 
 config X86_UP_APIC
 	bool "Local APIC support on uniprocessors" if !SMP
-	default y if SMP
 	---help---
 	  A local APIC (Advanced Programmable Interrupt Controller) is an
 	  integrated interrupt controller in the CPU. If you have a single-CPU
@@ -447,7 +446,7 @@ config X86_MCE
 	  the 386 and 486, so nearly everyone can say Y here.
 
 config X86_MCE_NONFATAL
-	bool "Check for non-fatal errors on Athlon/Duron"
+	bool "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4"
 	depends on X86_MCE
 	help
 	  Enabling this feature starts a timer that triggers every 5 seconds which
@@ -456,12 +455,12 @@ config X86_MCE_NONFATAL
 	  Disable this if you don't want to see these messages.
 	  Seeing the messages this option prints out may be indicative of dying hardware,
 	  or out-of-spec (ie, overclocked) hardware.
-	  This option only does something on hardware with Intel P6 style MCE.
-	  (Pentium Pro and above, AMD Athlon/Duron)
+	  This option only does something on certain CPUs.
+	  (AMD Athlon/Duron and Intel Pentium 4)
 
 config X86_MCE_P4THERMAL
 	bool "check for P4 thermal throttling interrupt."
-	depends on X86_MCE && X86_UP_APIC
+	depends on X86_MCE && (X86_UP_APIC || SMP)
 	help
 	  Enabling this feature will cause a message to be printed when the P4
 	  enters thermal throttling.

arch/i386/Makefile

@@ -42,7 +42,7 @@ cflags-$(CONFIG_MCRUSOE)	+= -march=i686 -malign-functions=0 -malign-jumps=0 -mal
 cflags-$(CONFIG_MWINCHIPC6)	+= $(call check_gcc,-march=winchip-c6,-march=i586)
 cflags-$(CONFIG_MWINCHIP2)	+= $(call check_gcc,-march=winchip2,-march=i586)
 cflags-$(CONFIG_MWINCHIP3D)	+= -march=i586
-cflags-$(CONFIG_MCYRIXIII)	+= $(call check_gcc,-march=c3,-march=i586)
+cflags-$(CONFIG_MCYRIXIII)	+= $(call check_gcc,-march=c3,-march=i486) -malign-functions=0 -malign-jumps=0 -malign-loops=0
 
 CFLAGS += $(cflags-y)
 

arch/i386/kernel/Makefile

@@ -8,8 +8,7 @@ export-objs     := mca.o i386_ksyms.o time.o
 
 obj-y	:= process.o semaphore.o signal.o entry.o traps.o irq.o vm86.o \
 		ptrace.o i8259.o ioport.o ldt.o setup.o time.o sys_i386.o \
-		pci-dma.o i386_ksyms.o i387.o bluesmoke.o dmi_scan.o \
-		bootflag.o
+		pci-dma.o i386_ksyms.o i387.o dmi_scan.o bootflag.o
 
 obj-y				+= cpu/
 obj-y				+= timers/

arch/i386/kernel/cpu/Makefile

@@ -13,7 +13,10 @@ obj-y	+=	rise.o
 obj-y	+=	nexgen.o
 obj-y	+=	umc.o
 
+obj-$(CONFIG_X86_MCE)	+=	mcheck/
+
 obj-$(CONFIG_MTRR)	+= 	mtrr/
 obj-$(CONFIG_CPU_FREQ)	+=	cpufreq/
 
+
 include $(TOPDIR)/Rules.make

arch/i386/kernel/cpu/common.c

@@ -358,7 +358,9 @@ void __init identify_cpu(struct cpuinfo_x86 *c)
 	       boot_cpu_data.x86_capability[3]);
 
 	/* Init Machine Check Exception if available. */
+#ifdef CONFIG_X86_MCE
 	mcheck_init(c);
+#endif
 }
 /*
  *	Perform early boot up checks for a valid TSC. See arch/i386/kernel/time.c

arch/i386/kernel/cpu/cyrix.c

@@ -5,6 +5,7 @@
 #include <asm/dma.h>
 #include <asm/io.h>
 #include <asm/processor.h>
+#include <asm/timer.h>
 
 #include "cpu.h"
 
@@ -170,7 +171,7 @@ static void __init init_cyrix(struct cpuinfo_x86 *c)
 		c->coma_bug = 1;
 		break;
 
-	case 4: /* MediaGX/GXm */
+	case 4: /* MediaGX/GXm or Geode GXM/GXLV/GX1 */
 #ifdef CONFIG_PCI
 		/* It isn't really a PCI quirk directly, but the cure is the
 		   same. The MediaGX has deep magic SMM stuff that handles the
@@ -188,29 +189,26 @@ static void __init init_cyrix(struct cpuinfo_x86 *c)
 		isa_dma_bridge_buggy = 2;
 #endif		
 		c->x86_cache_size=16;	/* Yep 16K integrated cache thats it */
+ 
+		/*
+		 *  The 5510/5520 companion chips have a funky PIT.
+		 */  
+		if (pci_find_device(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, NULL) ||
+		    pci_find_device(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, NULL))
+			pit_latch_buggy = 1;
 
 		/* GXm supports extended cpuid levels 'ala' AMD */
 		if (c->cpuid_level == 2) {
-			/* Enable Natsemi MMX extensions */
-			setCx86(CX86_CCR7, getCx86(CX86_CCR7) | 1);
+			/* Enable cxMMX extensions (GX1 Datasheet 54) */
+			setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1);
 
 			get_model_name(c);  /* get CPU marketing name */
-			/*
-			 *  The 5510/5520 companion chips have a funky PIT
-			 *  that breaks the TSC synchronizing, so turn it off
-			 */
-			if (pci_find_device(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, NULL) ||
-				pci_find_device(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, NULL))
-				clear_bit(X86_FEATURE_TSC, c->x86_capability);
 			return;
 		}
 		else {  /* MediaGX */
 			Cx86_cb[2] = (dir0_lsn & 1) ? '3' : '4';
 			p = Cx86_cb+2;
 			c->x86_model = (dir1 & 0x20) ? 1 : 2;
-#ifndef CONFIG_CS5520
-			clear_bit(X86_FEATURE_TSC, c->x86_capability);
-#endif
 		}
 		break;
 

arch/i386/kernel/cpu/mcheck/Makefile

+obj-y	=	mce.o k7.o p4.o p5.o p6.o winchip.o
+obj-$(CONFIG_X86_MCE_NONFATAL)	+=	non-fatal.o
+
+include $(TOPDIR)/Rules.make
+

arch/i386/kernel/cpu/mcheck/k7.c

+/*
+ * Athlon specific Machine Check Exception Reporting
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/config.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+#include <asm/processor.h> 
+#include <asm/system.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+/* Machine Check Handler For AMD Athlon/Duron */
+static void k7_machine_check(struct pt_regs * regs, long error_code)
+{
+	int recover=1;
+	u32 alow, ahigh, high, low;
+	u32 mcgstl, mcgsth;
+	int i;
+
+	rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
+	if (mcgstl & (1<<0))	/* Recoverable ? */
+		recover=0;
+
+	printk (KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
+		smp_processor_id(), mcgsth, mcgstl);
+
+	for (i=0; i<nr_mce_banks; i++) {
+		rdmsr (MSR_IA32_MC0_STATUS+i*4,low, high);
+		if (high&(1<<31)) {
+			if (high & (1<<29))
+				recover |= 1;
+			if (high & (1<<25))
+				recover |= 2;
+			printk (KERN_EMERG "Bank %d: %08x%08x", i, high, low);
+			high &= ~(1<<31);
+			if (high & (1<<27)) {
+				rdmsr (MSR_IA32_MC0_MISC+i*4, alow, ahigh);
+				printk ("[%08x%08x]", ahigh, alow);
+			}
+			if (high & (1<<26)) {
+				rdmsr (MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
+				printk (" at %08x%08x", ahigh, alow);
+			}
+			printk ("\n");
+			/* Clear it */
+			wrmsr (MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
+			/* Serialize */
+			wmb();
+		}
+	}
+
+	if (recover&2)
+		panic ("CPU context corrupt");
+	if (recover&1)
+		panic ("Unable to continue");
+	printk (KERN_EMERG "Attempting to continue.\n");
+	mcgstl &= ~(1<<2);
+	wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth);
+}
+
+
+/* AMD K7 machine check is Intel like */
+void __init amd_mcheck_init(struct cpuinfo_x86 *c)
+{
+	u32 l, h;
+	int i;
+
+	machine_check_vector = k7_machine_check;
+	wmb();
+
+	printk (KERN_INFO "Intel machine check architecture supported.\n");
+	rdmsr (MSR_IA32_MCG_CAP, l, h);
+	if (l & (1<<8))	/* Control register present ? */
+		wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
+	nr_mce_banks = l & 0xff;
+
+	for (i=0; i<nr_mce_banks; i++) {
+		wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
+		wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
+	}
+
+	set_in_cr4 (X86_CR4_MCE);
+	printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
+		smp_processor_id());
+
+#ifdef CONFIG_X86_MCE_NONFATAL
+	init_nonfatal_mce_checker();
+#endif
+}

arch/i386/kernel/cpu/mcheck/mce.c

+/*
+ * mce.c - x86 Machine Check Exception Reporting
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/config.h>
+#include <linux/smp.h>
+#include <asm/processor.h> 
+#include <asm/system.h>
+#include <asm/thread_info.h>
+
+#include "mce.h"
+
+int mce_disabled __initdata = 0;
+int nr_mce_banks;
+
+/* Handle unconfigured int18 (should never happen) */
+static void unexpected_machine_check(struct pt_regs * regs, long error_code)
+{	
+	printk(KERN_ERR "CPU#%d: Unexpected int18 (Machine Check).\n", smp_processor_id());
+}
+
+/* Call the installed machine check handler for this CPU setup. */
+void (*machine_check_vector)(struct pt_regs *, long error_code) = unexpected_machine_check;
+
+asmlinkage void do_machine_check(struct pt_regs * regs, long error_code)
+{
+	machine_check_vector(regs, error_code);
+}
+
+/* This has to be run for each processor */
+void __init mcheck_init(struct cpuinfo_x86 *c)
+{
+	if (mce_disabled==1)
+		return;
+
+	switch (c->x86_vendor) {
+		case X86_VENDOR_AMD:
+			if (c->x86==6 || c->x86==15)
+				amd_mcheck_init(c);
+			break;
+
+		case X86_VENDOR_INTEL:
+			if (c->x86==5)
+				intel_p5_mcheck_init(c);
+			if (c->x86==6)
+				intel_p6_mcheck_init(c);
+			if (c->x86==15)
+				intel_p4_mcheck_init(c);
+			break;
+
+		case X86_VENDOR_CENTAUR:
+			if (c->x86==5)
+				winchip_mcheck_init(c);
+			break;
+
+		default:
+			break;
+	}
+}
+
+static int __init mcheck_disable(char *str)
+{
+	mce_disabled = 1;
+	return 0;
+}
+
+static int __init mcheck_enable(char *str)
+{
+	mce_disabled = -1;
+	return 0;
+}
+
+__setup("nomce", mcheck_disable);
+__setup("mce", mcheck_enable);

arch/i386/kernel/cpu/mcheck/mce.h

+#include <linux/init.h>
+
+void amd_mcheck_init(struct cpuinfo_x86 *c);
+void intel_p4_mcheck_init(struct cpuinfo_x86 *c);
+void intel_p5_mcheck_init(struct cpuinfo_x86 *c);
+void intel_p6_mcheck_init(struct cpuinfo_x86 *c);
+void winchip_mcheck_init(struct cpuinfo_x86 *c);
+
+void init_nonfatal_mce_checker(void);
+
+/* Call the installed machine check handler for this CPU setup. */
+extern void (*machine_check_vector)(struct pt_regs *, long error_code);
+
+extern int mce_disabled __initdata;
+extern int nr_mce_banks;
+

arch/i386/kernel/cpu/mcheck/non-fatal.c

+/*
+ * P4 specific Machine Check Exception Reporting
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/jiffies.h>
+#include <linux/config.h>
+#include <linux/irq.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+#include <asm/processor.h> 
+#include <asm/system.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+static struct timer_list mce_timer;
+static int timerset;
+
+#define MCE_RATE	15*HZ	/* timer rate is 15s */
+
+static void mce_checkregs (void *info)
+{
+	u32 low, high;
+	int i;
+
+	preempt_disable(); 
+	for (i=0; i<nr_mce_banks; i++) {
+		rdmsr (MSR_IA32_MC0_STATUS+i*4, low, high);
+
+		if (high & (1<<31)) {
+			printk (KERN_EMERG "MCE: The hardware reports a non fatal, correctable incident occured on CPU %d.\n",
+				smp_processor_id());
+			printk (KERN_EMERG "Bank %d: %08x%08x\n", i, high, low);
+
+			/* Scrub the error so we don't pick it up in MCE_RATE seconds time. */
+			wrmsr (MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
+
+			/* Serialize */
+			wmb();
+		}
+	}
+	preempt_enable();
+}
+
+static void do_mce_timer(void *data)
+{ 
+	mce_checkregs (NULL);
+	smp_call_function (mce_checkregs, NULL, 1, 1);
+} 
+
+static DECLARE_WORK(mce_work, do_mce_timer, NULL);
+
+static void mce_timerfunc (unsigned long data)
+{
+#ifdef CONFIG_SMP
+	if (num_online_cpus() > 1) 
+		schedule_work (&mce_work); 
+#else
+	mce_checkregs (NULL);
+#endif
+	mce_timer.expires = jiffies + MCE_RATE;
+	add_timer (&mce_timer);
+}	
+
+void init_nonfatal_mce_checker()
+{
+	if (timerset == 0) {
+		/* Set the timer to check for non-fatal
+		   errors every MCE_RATE seconds */
+		init_timer (&mce_timer);
+		mce_timer.expires = jiffies + MCE_RATE;
+		mce_timer.data = 0;
+		mce_timer.function = &mce_timerfunc;
+		add_timer (&mce_timer);
+		timerset = 1;
+		printk(KERN_INFO "Machine check exception polling timer started.\n");
+	}
+}

arch/i386/kernel/cpu/mcheck/p5.c

+/*
+ * P5 specific Machine Check Exception Reporting
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+#include <asm/processor.h> 
+#include <asm/system.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+/* Machine check handler for Pentium class Intel */
+static void pentium_machine_check(struct pt_regs * regs, long error_code)
+{
+	u32 loaddr, hi, lotype;
+	rdmsr(MSR_IA32_P5_MC_ADDR, loaddr, hi);
+	rdmsr(MSR_IA32_P5_MC_TYPE, lotype, hi);
+	printk(KERN_EMERG "CPU#%d: Machine Check Exception:  0x%8X (type 0x%8X).\n", smp_processor_id(), loaddr, lotype);
+	if(lotype&(1<<5))
+		printk(KERN_EMERG "CPU#%d: Possible thermal failure (CPU on fire ?).\n", smp_processor_id());
+}
+
+/* Set up machine check reporting for processors with Intel style MCE */
+void __init intel_p5_mcheck_init(struct cpuinfo_x86 *c)
+{
+	u32 l, h;
+	
+	/*Check for MCE support */
+	if( !cpu_has(c, X86_FEATURE_MCE) )
+		return;	
+
+	/* Default P5 to off as its often misconnected */
+	if(mce_disabled != -1)
+		return;
+	machine_check_vector = pentium_machine_check;
+	wmb();
+
+	/* Read registers before enabling */
+	rdmsr(MSR_IA32_P5_MC_ADDR, l, h);
+	rdmsr(MSR_IA32_P5_MC_TYPE, l, h);
+	printk(KERN_INFO "Intel old style machine check architecture supported.\n");
+
+ 	/* Enable MCE */
+	set_in_cr4(X86_CR4_MCE);
+	printk(KERN_INFO "Intel old style machine check reporting enabled on CPU#%d.\n", smp_processor_id());
+}

arch/i386/kernel/cpu/mcheck/p6.c

+/*
+ * P6 specific Machine Check Exception Reporting
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+#include <asm/processor.h> 
+#include <asm/system.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+/* Machine Check Handler For PII/PIII */
+static void intel_machine_check(struct pt_regs * regs, long error_code)
+{
+	int recover=1;
+	u32 alow, ahigh, high, low;
+	u32 mcgstl, mcgsth;
+	int i;
+
+	rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
+	if (mcgstl & (1<<0))	/* Recoverable ? */
+		recover=0;
+
+	printk (KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
+		smp_processor_id(), mcgsth, mcgstl);
+
+	for (i=0; i<nr_mce_banks; i++) {
+		rdmsr (MSR_IA32_MC0_STATUS+i*4,low, high);
+		if (high & (1<<31)) {
+			if (high & (1<<29))
+				recover |= 1;
+			if (high & (1<<25))
+				recover |= 2;
+			printk (KERN_EMERG "Bank %d: %08x%08x", i, high, low);
+			high &= ~(1<<31);
+			if (high & (1<<27)) {
+				rdmsr (MSR_IA32_MC0_MISC+i*4, alow, ahigh);
+				printk ("[%08x%08x]", ahigh, alow);
+			}
+			if (high & (1<<26)) {
+				rdmsr (MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
+				printk (" at %08x%08x", ahigh, alow);
+			}
+			printk ("\n");
+		}
+	}
+
+	if (recover & 2)
+		panic ("CPU context corrupt");
+	if (recover & 1)
+		panic ("Unable to continue");
+
+	printk (KERN_EMERG "Attempting to continue.\n");
+	/* 
+	 * Do not clear the MSR_IA32_MCi_STATUS if the error is not 
+	 * recoverable/continuable.This will allow BIOS to look at the MSRs
+	 * for errors if the OS could not log the error.
+	 */
+	for (i=0; i<nr_mce_banks; i++) {
+		unsigned int msr;
+		msr = MSR_IA32_MC0_STATUS+i*4;
+		rdmsr (msr,low, high);
+		if (high & (1<<31)) {
+			/* Clear it */
+			wrmsr (msr, 0UL, 0UL);
+			/* Serialize */
+			wmb();
+		}
+	}
+	mcgstl &= ~(1<<2);
+	wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth);
+}
+
+/* Set up machine check reporting for processors with Intel style MCE */
+void __init intel_p6_mcheck_init(struct cpuinfo_x86 *c)
+{
+	u32 l, h;
+	int i;
+	
+	/* Check for MCE support */
+	if (!cpu_has(c, X86_FEATURE_MCE))
+		return;
+
+	/* Check for PPro style MCA */
+ 	if (!cpu_has(c, X86_FEATURE_MCA))
+		return;
+
+	/* Ok machine check is available */
+	machine_check_vector = intel_machine_check;
+	wmb();
+
+	printk (KERN_INFO "Intel machine check architecture supported.\n");
+	rdmsr (MSR_IA32_MCG_CAP, l, h);
+	if (l & (1<<8))	/* Control register present ? */
+		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
+	nr_mce_banks = l & 0xff;
+
+	/* Don't enable bank 0 on intel P6 cores, it goes bang quickly. */
+	for (i=1; i<nr_mce_banks; i++) {
+		wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
+		wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
+	}
+
+	set_in_cr4 (X86_CR4_MCE);
+	printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
+		smp_processor_id());
+}

arch/i386/kernel/cpu/mcheck/winchip.c

+/*
+ * IDT Winchip specific Machine Check Exception Reporting
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/processor.h> 
+#include <asm/system.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+/* Machine check handler for WinChip C6 */
+static void winchip_machine_check(struct pt_regs * regs, long error_code)
+{
+	printk(KERN_EMERG "CPU0: Machine Check Exception.\n");
+}
+
+/* Set up machine check reporting on the Winchip C6 series */
+void __init winchip_mcheck_init(struct cpuinfo_x86 *c)
+{
+	u32 lo, hi;
+	machine_check_vector = winchip_machine_check;
+	wmb();
+	rdmsr(MSR_IDT_FCR1, lo, hi);
+	lo|= (1<<2);	/* Enable EIERRINT (int 18 MCE) */
+	lo&= ~(1<<4);	/* Enable MCE */
+	wrmsr(MSR_IDT_FCR1, lo, hi);
+	set_in_cr4(X86_CR4_MCE);
+	printk(KERN_INFO "Winchip machine check reporting enabled on CPU#0.\n");
+}

arch/i386/kernel/entry.S

@@ -471,10 +471,12 @@ ENTRY(page_fault)
 	pushl $do_page_fault
 	jmp error_code
 
+#ifdef CONFIG_X86_MCE
 ENTRY(machine_check)
 	pushl $0
 	pushl $do_machine_check
 	jmp error_code
+#endif
 
 ENTRY(spurious_interrupt_bug)
 	pushl $0

arch/i386/kernel/time.c

@@ -61,6 +61,7 @@
 #include <asm/arch_hooks.h>
 
 extern spinlock_t i8259A_lock;
+int pit_latch_buggy;              /* extern */
 
 #include "do_timer.h"
 

arch/i386/kernel/timers/timer_tsc.c

@@ -60,6 +60,8 @@ static unsigned long get_offset_tsc(void)
 static void mark_offset_tsc(void)
 {
 	int count;
+	int countmp;
+	static int count1=0, count2=LATCH;
 	/*
 	 * It is important that these two operations happen almost at
 	 * the same time. We do the RDTSC stuff first, since it's
@@ -83,6 +85,20 @@ static void mark_offset_tsc(void)
 	count |= inb(0x40) << 8;
 	spin_unlock(&i8253_lock);
 
+	if (pit_latch_buggy) {
+		/* get center value of last 3 time lutch */
+		if ((count2 >= count && count >= count1)
+		    || (count1 >= count && count >= count2)) {
+			count2 = count1; count1 = count;
+		} else if ((count1 >= count2 && count2 >= count)
+			   || (count >= count2 && count2 >= count1)) {
+			countmp = count;count = count2;
+			count2 = count1;count1 = countmp;
+		} else {
+			count2 = count1; count1 = count; count = count1;
+		}
+	}
+
 	count = ((LATCH-1) - count) * TICK_SIZE;
 	delay_at_last_interrupt = (count + LATCH/2) / LATCH;
 }
@@ -111,10 +127,12 @@ static unsigned long __init calibrate_tsc(void)
 	 * Set the Gate high, program CTC channel 2 for mode 0,
 	 * (interrupt on terminal count mode), binary count,
 	 * load 5 * LATCH count, (LSB and MSB) to begin countdown.
+	 *
+	 * Some devices need a delay here.
 	 */
 	outb(0xb0, 0x43);			/* binary, mode 0, LSB/MSB, Ch 2 */
-	outb(CALIBRATE_LATCH & 0xff, 0x42);	/* LSB of count */
-	outb(CALIBRATE_LATCH >> 8, 0x42);	/* MSB of count */
+	outb_p(CALIBRATE_LATCH & 0xff, 0x42);	/* LSB of count */
+	outb_p(CALIBRATE_LATCH >> 8, 0x42);       /* MSB of count */
 
 	{
 		unsigned long startlow, starthigh;
@@ -238,8 +256,6 @@ static int init_tsc(void)
  	 *	moaned if you have the only one in the world - you fix it!
  	 */
  
- 	dodgy_tsc();
- 	
 	if (cpu_has_tsc) {
 		unsigned long tsc_quotient = calibrate_tsc();
 		if (tsc_quotient) {

arch/i386/kernel/traps.c

@@ -906,7 +906,9 @@ void __init trap_init(void)
 	set_trap_gate(15,&spurious_interrupt_bug);
 	set_trap_gate(16,&coprocessor_error);
 	set_trap_gate(17,&alignment_check);
+#ifdef CONFIG_X86_MCE
 	set_trap_gate(18,&machine_check);
+#endif
 	set_trap_gate(19,&simd_coprocessor_error);
 
 	set_system_gate(SYSCALL_VECTOR,&system_call);

drivers/ieee1394/sbp2.c

@@ -3139,12 +3139,12 @@ static int sbp2scsi_reset (Scsi_Cmnd *SCpnt)
  */
 #if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,44)
 static int sbp2scsi_biosparam (struct scsi_device *sdev,
-		struct block_device *dev, sector_t capacy, int geom[]) 
+		struct block_device *dev, sector_t capacity, int geom[]) 
 {
 #else
 static int sbp2scsi_biosparam (Scsi_Disk *disk, kdev_t dev, int geom[]) 
 {
-	sector_t capacy = disk->capacity;
+	sector_t capacity = disk->capacity;
 #endif
 	int heads, sectors, cylinders;
 

drivers/ieee1394/sbp2.h

@@ -549,10 +549,10 @@ static int sbp2_max_speed_and_size(struct sbp2scsi_host_info *hi, struct scsi_id
 static int sbp2scsi_detect (Scsi_Host_Template *tpnt);
 static const char *sbp2scsi_info (struct Scsi_Host *host);
 void sbp2scsi_setup(char *str, int *ints);
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,28)
-static int sbp2scsi_biosparam (Scsi_Disk *disk, kdev_t dev, int geom[]);
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,44)
+static int sbp2scsi_biosparam (struct scsi_device *sdev, struct block_device *dev, sector_t capacity, int geom[]);
 #else
-static int sbp2scsi_biosparam (Scsi_Disk *disk, struct block_device *dev, int geom[]);
+static int sbp2scsi_biosparam (Scsi_Disk *disk, kdev_t dev, int geom[]);
 #endif
 static int sbp2scsi_abort (Scsi_Cmnd *SCpnt); 
 static int sbp2scsi_reset (Scsi_Cmnd *SCpnt); 

drivers/scsi/NCR53c406a.c

@@ -677,22 +677,6 @@ static void wait_intr(void)
 	NCR53c406a_intr(0, NULL, NULL);
 }
 
-static int NCR53c406a_command(Scsi_Cmnd * SCpnt)
-{
-	DEB(printk("NCR53c406a_command called\n"));
-	NCR53c406a_queue(SCpnt, internal_done);
-	if (irq_level)
-		while (!internal_done_flag)
-			cpu_relax();
-	else			/* interrupts not supported */
-		while (!internal_done_flag)
-			wait_intr();
-
-	internal_done_flag = 0;
-	return internal_done_errcode;
-}
-
-
 static int NCR53c406a_queue(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
 {
 	int i;
@@ -726,6 +710,21 @@ static int NCR53c406a_queue(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
 	return 0;
 }
 
+static int NCR53c406a_command(Scsi_Cmnd * SCpnt)
+{
+	DEB(printk("NCR53c406a_command called\n"));
+	NCR53c406a_queue(SCpnt, internal_done);
+	if (irq_level)
+		while (!internal_done_flag)
+			cpu_relax();
+	else			/* interrupts not supported */
+		while (!internal_done_flag)
+			wait_intr();
+
+	internal_done_flag = 0;
+	return internal_done_errcode;
+}
+
 static int NCR53c406a_abort(Scsi_Cmnd * SCpnt)
 {
 	DEB(printk("NCR53c406a_abort called\n"));
@@ -755,7 +754,7 @@ static int NCR53c406a_bus_reset(Scsi_Cmnd * SCpnt)
 	return FAILED;
 }
 
-static int NCR53c406a_biosparm(struct scsi_disk *disk,
+static int NCR53c406a_biosparm(struct scsi_device *disk,
                                struct block_device *dev,
 			       sector_t capacity, int *info_array)
 {
@@ -1065,8 +1064,30 @@ static void __init calc_port_addr(void)
 
 MODULE_LICENSE("GPL");
 
-/* Eventually this will go into an include file, but this will be later */
-static Scsi_Host_Template driver_template = NCR53c406a;
+/* NOTE:  scatter-gather support only works in PIO mode.
+ * Use SG_NONE if DMA mode is enabled!
+ */
+
+static Scsi_Host_Template driver_template = 
+{
+     proc_name:         	"NCR53c406a"		/* proc_name */,        
+     name:              	"NCR53c406a"		/* name */,             
+     detect:            	NCR53c406a_detect	/* detect */,           
+     info:              	NCR53c406a_info		/* info */,             
+     command:           	NCR53c406a_command	/* command */,          
+     queuecommand:      	NCR53c406a_queue	/* queuecommand */,     
+     eh_abort_handler:  	NCR53c406a_abort	/* abort */,            
+     eh_bus_reset_handler:      NCR53c406a_bus_reset	/* reset */,            
+     eh_device_reset_handler:   NCR53c406a_device_reset	/* reset */,            
+     eh_host_reset_handler:     NCR53c406a_host_reset	/* reset */,            
+     bios_param:        	NCR53c406a_biosparm	/* biosparm */,         
+     can_queue:         	1			/* can_queue */,        
+     this_id:           	7			/* SCSI ID of the chip */,
+     sg_tablesize:      	32			/*SG_ALL*/ /*SG_NONE*/, 
+     cmd_per_lun:       	1			/* commands per lun */, 
+     unchecked_isa_dma: 	1			/* unchecked_isa_dma */,
+     use_clustering:    	ENABLE_CLUSTERING                               
+};
 
 #include "scsi_module.c"
 

drivers/scsi/NCR53c406a.h

-#ifndef _NCR53C406A_H
-#define _NCR53C406A_H
-
-/*
- *  NCR53c406a.h
- * 
- *  Copyright (C) 1994 Normunds Saumanis (normunds@rx.tech.swh.lv)
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2, or (at your option) any
- *  later version.
- *
- *  This program is distributed in the hope that it will be useful, but
- *  WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *  General Public License for more details.
- *
- */
-
-#ifndef NULL
-#define NULL 0
-#endif
-
-/* NOTE:  scatter-gather support only works in PIO mode.
- * Use SG_NONE if DMA mode is enabled!
- */
-#define NCR53c406a { \
-     proc_name:         	"NCR53c406a"		/* proc_name */,        \
-     name:              	"NCR53c406a"		/* name */,             \
-     detect:            	NCR53c406a_detect	/* detect */,           \
-     info:              	NCR53c406a_info		/* info */,             \
-     command:           	NCR53c406a_command	/* command */,          \
-     queuecommand:      	NCR53c406a_queue	/* queuecommand */,     \
-     eh_abort_handler:  	NCR53c406a_abort	/* abort */,            \
-     eh_bus_reset_handler:      NCR53c406a_bus_reset	/* reset */,            \
-     eh_device_reset_handler:   NCR53c406a_device_reset	/* reset */,            \
-     eh_host_reset_handler:     NCR53c406a_host_reset	/* reset */,            \
-     bios_param:        	NCR53c406a_biosparm	/* biosparm */,         \
-     can_queue:         	1			/* can_queue */,        \
-     this_id:           	7			/* SCSI ID of the chip */, \
-     sg_tablesize:      	32			/*SG_ALL*/ /*SG_NONE*/, \
-     cmd_per_lun:       	1			/* commands per lun */, \
-     unchecked_isa_dma: 	1			/* unchecked_isa_dma */, \
-     use_clustering:    	ENABLE_CLUSTERING                               \
-}
-
-static int NCR53c406a_detect(Scsi_Host_Template *);
-static const char *NCR53c406a_info(struct Scsi_Host *);
-static int NCR53c406a_command(Scsi_Cmnd *);
-static int NCR53c406a_queue(Scsi_Cmnd *, void (*done) (Scsi_Cmnd *));
-static int NCR53c406a_abort(Scsi_Cmnd *);
-static int NCR53c406a_bus_reset(Scsi_Cmnd *);
-static int NCR53c406a_device_reset(Scsi_Cmnd *);
-static int NCR53c406a_host_reset(Scsi_Cmnd *);
-static int NCR53c406a_biosparm(Disk *, struct block_device *, sector_t, int[]);
-
-#endif				/* _NCR53C406A_H */

drivers/scsi/aha1740.c

@@ -20,6 +20,14 @@
  *
  * aha1740_makecode may still need even more work
  * if it doesn't work for your devices, take a look.
+ *
+ * Reworked for new_eh and new locking by Alan Cox <alan@redhat.com>
+ *
+ * For the avoidance of doubt the "preferred form" of this code is one which
+ * is in an open non patent encumbered format. Where cryptographic key signing
+ * forms part of the process of creating an executable the information
+ * including keys needed to generate an equivalently functional executable
+ * are deemed to be part of the source code.
  */
 
 #include <linux/module.h>
@@ -68,7 +76,7 @@ static spinlock_t aha1740_lock = SPIN_LOCK_UNLOCKED;
 /* One for each IRQ level (9-15) */
 static struct Scsi_Host * aha_host[8] = {NULL, };
 
-int aha1740_proc_info(char *buffer, char **start, off_t offset,
+static int aha1740_proc_info(char *buffer, char **start, off_t offset,
 		      int length, int hostno, int inout)
 {
     int len;
@@ -76,7 +84,7 @@ int aha1740_proc_info(char *buffer, char **start, off_t offset,
     struct aha1740_hostdata *host;
 
     if (inout)
-	return(-ENOSYS);
+	return-ENOSYS;
 
     for (len = 0; len < 8; len++) {
 	shpnt = aha_host[len];
@@ -103,7 +111,7 @@ int aha1740_proc_info(char *buffer, char **start, off_t offset,
 }
 
 
-int aha1740_makecode(unchar *sense, unchar *status)
+static int aha1740_makecode(unchar *sense, unchar *status)
 {
     struct statusword
     {
@@ -179,7 +187,7 @@ int aha1740_makecode(unchar *sense, unchar *status)
     return status[3] | retval << 16;
 }
 
-int aha1740_test_port(unsigned int base)
+static int aha1740_test_port(unsigned int base)
 {
     char name[4], tmp;
 
@@ -212,7 +220,7 @@ int aha1740_test_port(unsigned int base)
 }
 
 /* A "high" level interrupt handler */
-void aha1740_intr_handle(int irq, void *dev_id, struct pt_regs * regs)
+static void aha1740_intr_handle(int irq, void *dev_id, struct pt_regs * regs)
 {
     struct Scsi_Host *host = aha_host[irq - 9];
     void (*my_done)(Scsi_Cmnd *);
@@ -303,7 +311,7 @@ void aha1740_intr_handle(int irq, void *dev_id, struct pt_regs * regs)
     spin_unlock_irqrestore(host->host_lock, flags);
 }
 
-int aha1740_queuecommand(Scsi_Cmnd * SCpnt, void (*done)(Scsi_Cmnd *))
+static int aha1740_queuecommand(Scsi_Cmnd * SCpnt, void (*done)(Scsi_Cmnd *))
 {
     unchar direction;
     unchar *cmd = (unchar *) SCpnt->cmnd;
@@ -317,16 +325,6 @@ int aha1740_queuecommand(Scsi_Cmnd * SCpnt, void (*done)(Scsi_Cmnd *))
 
     if(*cmd == REQUEST_SENSE)
     {
-#if 0
-	/* scsi_request_sense() provides a buffer of size 256,
-	   so there is no reason to expect equality */
-
-	if (bufflen != sizeof(SCpnt->sense_buffer))
-	{
-	    printk("Wrong buffer length supplied for request sense (%d)\n",
-		   bufflen);
-	}
-#endif	
 	SCpnt->result = 0;
 	done(SCpnt); 
 	return 0;
@@ -486,7 +484,7 @@ static void internal_done(Scsi_Cmnd * SCpnt)
     SCpnt->SCp.Status++;
 }
 
-int aha1740_command(Scsi_Cmnd * SCpnt)
+static int aha1740_command(Scsi_Cmnd * SCpnt)
 {
     aha1740_queuecommand(SCpnt, internal_done);
     SCpnt->SCp.Status = 0;
@@ -501,7 +499,7 @@ int aha1740_command(Scsi_Cmnd * SCpnt)
 /* Query the board for its irq_level.  Nothing else matters
    in enhanced mode on an EISA bus. */
 
-void aha1740_getconfig(unsigned int base, unsigned int *irq_level,
+static void aha1740_getconfig(unsigned int base, unsigned int *irq_level,
 		       unsigned int *translation)
 {
     static int intab[] = { 9, 10, 11, 12, 0, 14, 15, 0 };
@@ -511,7 +509,7 @@ void aha1740_getconfig(unsigned int base, unsigned int *irq_level,
     outb(inb(INTDEF(base)) | 0x10, INTDEF(base));
 }
 
-int aha1740_detect(Scsi_Host_Template * tpnt)
+static int aha1740_detect(Scsi_Host_Template * tpnt)
 {
     int count = 0, slot;
 
@@ -540,8 +538,8 @@ int aha1740_detect(Scsi_Host_Template * tpnt)
 	    outb(G2CNTRL_HRST, G2CNTRL(slotbase));
 	    outb(0, G2CNTRL(slotbase));
 	}
-	printk("Configuring aha174x at IO:%x, IRQ %d\n", slotbase, irq_level);
-	printk("aha174x: Extended translation %sabled.\n",
+	printk(KERN_INFO "Configuring aha174x at IO:%x, IRQ %d\n", slotbase, irq_level);
+	printk(KERN_INFO "aha174x: Extended translation %sabled.\n",
 	       translation ? "en" : "dis");
 	DEB(printk("aha1740_detect: enable interrupt channel %d\n",irq_level));
 	if (request_irq(irq_level,aha1740_intr_handle,0,"aha1740",NULL)) {
@@ -572,31 +570,7 @@ int aha1740_detect(Scsi_Host_Template * tpnt)
     return count;
 }
 
-/* Note:  They following two functions do not apply very well to the Adaptec,
-   which basically manages its own affairs quite well without our interference,
-   so I haven't put anything into them.  I can faintly imagine someone with a
-   *very* badly behaved SCSI target (perhaps an old tape?) wanting the abort(),
-   but it hasn't happened yet, and doing aborts brings the Adaptec to its
-   knees.  I cannot (at this moment in time) think of any reason to reset the
-   card once it's running.  So there. */
-
-int aha1740_abort(Scsi_Cmnd * SCpnt)
-{
-    DEB(printk("aha1740_abort called\n"));
-    return SCSI_ABORT_SNOOZE;
-}
-
-/* We do not implement a reset function here, but the upper level code assumes
-   that it will get some kind of response for the command in SCpnt.  We must
-   oblige, or the command will hang the scsi system */
-
-int aha1740_reset(Scsi_Cmnd * SCpnt, unsigned int ignored)
-{
-    DEB(printk("aha1740_reset called\n"));
-    return SCSI_RESET_PUNT;
-}
-
-int aha1740_biosparam(struct scsi_device *sdev, struct block_device *dev,
+static int aha1740_biosparam(struct scsi_device *sdev, struct block_device *dev,
 		sector_t capacity, int* ip)
 {
     int size = capacity;

drivers/scsi/aha1740.h

@@ -13,8 +13,8 @@
 #include <linux/types.h>
 
 /* Eisa Enhanced mode operation - slot locating and addressing */
-#define MINEISA 1   /* I don't have an EISA Spec to know these ranges, so I */
-#define MAXEISA 8   /* Just took my machine's specifications.  Adjust to fit.*/
+#define MINEISA 1		/* I don't have an EISA Spec to know these ranges, so I */
+#define MAXEISA 8		/* Just took my machine's specifications.  Adjust to fit. */
 		    /* I just saw an ad, and bumped this from 6 to 8 */
 #define	SLOTBASE(x)	((x << 12) + 0xc80)
 #define SLOTSIZE	0x5c
@@ -75,14 +75,14 @@
 #define	ATTN_START	0x40	/* Start CCB */
 #define	ATTN_ABORT	0x50	/* Abort CCB */
 
-#define G2CNTRL_HRST	0x80		/* Hard Reset */
-#define G2CNTRL_IRST	0x40		/* Clear EISA Interrupt */
-#define G2CNTRL_HRDY	0x20		/* Sets HOST ready */
+#define G2CNTRL_HRST	0x80	/* Hard Reset */
+#define G2CNTRL_IRST	0x40	/* Clear EISA Interrupt */
+#define G2CNTRL_HRDY	0x20	/* Sets HOST ready */
 
 /* This is used with scatter-gather */
 struct aha1740_chain {
-  u32  dataptr;		/* Location of data */
-  u32  datalen;		/* Size of this part of chain */
+	u32 dataptr;		/* Location of data */
+	u32 datalen;		/* Size of this part of chain */
 };
 
 /* These belong in scsi.h */
@@ -107,40 +107,40 @@ struct aha1740_chain {
 #define MAX_STATUS 32
 
 struct ecb {			/* Enhanced Control Block 6.1 */
-  u16	cmdw;			/* Command Word */
-  /* Flag Word 1 */
-  u16		cne:1,		/* Control Block Chaining */
-	:6,	di:1,		/* Disable Interrupt */
-	:2,	ses:1,		/* Suppress Underrun error */
-	:1,	sg:1,		/* Scatter/Gather */
-	:1,	dsb:1,		/* Disable Status Block */
-		ars:1;		/* Automatic Request Sense */
-  /* Flag Word 2 */
-  u16		lun:3,		/* Logical Unit */
-		tag:1,		/* Tagged Queuing */
-		tt:2,		/* Tag Type */
-		nd:1,		/* No Disconnect */
-	:1,	dat:1,		/* Data transfer - check direction */
-		dir:1,		/* Direction of transfer 1 = datain */
-		st:1,		/* Suppress Transfer */
-		chk:1,		/* Calculate Checksum */
-	:2,	rec:1,	:1;	/* Error Recovery */
-  u16	nil0;			/* nothing */
-  u32	dataptr;		/* Data or Scatter List ptr */
-  u32	datalen;		/* Data or Scatter List len */
-  u32	statusptr;		/* Status Block ptr */
-  u32	linkptr;		/* Chain Address */
-  u32	nil1;			/* nothing */
-  u32	senseptr;		/* Sense Info Pointer */
-  u8	senselen;		/* Sense Length */
-  u8	cdblen;			/* CDB Length */
-  u16	datacheck;		/* Data checksum */
-  u8	cdb[MAX_CDB];		/* CDB area */
+	u16 cmdw;		/* Command Word */
+	/* Flag Word 1 */
+	u16 cne:1,		/* Control Block Chaining */
+	:6, di:1,		/* Disable Interrupt */
+	:2, ses:1,		/* Suppress Underrun error */
+	:1, sg:1,		/* Scatter/Gather */
+	:1, dsb:1,		/* Disable Status Block */
+	 ars:1;			/* Automatic Request Sense */
+	/* Flag Word 2 */
+	u16 lun:3,		/* Logical Unit */
+	 tag:1,			/* Tagged Queuing */
+	 tt:2,			/* Tag Type */
+	 nd:1,			/* No Disconnect */
+	:1, dat:1,		/* Data transfer - check direction */
+	 dir:1,			/* Direction of transfer 1 = datain */
+	 st:1,			/* Suppress Transfer */
+	 chk:1,			/* Calculate Checksum */
+	:2, rec:1,:1;		/* Error Recovery */
+	u16 nil0;		/* nothing */
+	u32 dataptr;		/* Data or Scatter List ptr */
+	u32 datalen;		/* Data or Scatter List len */
+	u32 statusptr;		/* Status Block ptr */
+	u32 linkptr;		/* Chain Address */
+	u32 nil1;		/* nothing */
+	u32 senseptr;		/* Sense Info Pointer */
+	u8 senselen;		/* Sense Length */
+	u8 cdblen;		/* CDB Length */
+	u16 datacheck;		/* Data checksum */
+	u8 cdb[MAX_CDB];	/* CDB area */
 /* Hardware defined portion ends here, rest is driver defined */
-  u8	sense[MAX_SENSE];	/* Sense area */ 
-  u8	status[MAX_STATUS];	/* Status area */
-  Scsi_Cmnd *SCpnt;		/* Link to the SCSI Command Block */
-  void (*done)(Scsi_Cmnd *);	/* Completion Function */
+	u8 sense[MAX_SENSE];	/* Sense area */
+	u8 status[MAX_STATUS];	/* Status area */
+	Scsi_Cmnd *SCpnt;	/* Link to the SCSI Command Block */
+	void (*done) (Scsi_Cmnd *);	/* Completion Function */
 };
 
 #define	AHA1740CMD_NOP	 0x00	/* No OP */
@@ -152,32 +152,22 @@ struct ecb {			/* Enhanced Control Block 6.1 */
 #define AHA1740CMD_RINQ  0x0a	/* Read Host Adapter Inquiry Data */
 #define AHA1740CMD_TARG  0x10	/* Target SCSI Command */
 
-int aha1740_detect(Scsi_Host_Template *);
-int aha1740_command(Scsi_Cmnd *);
-int aha1740_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
-int aha1740_abort(Scsi_Cmnd *);
-int aha1740_reset(Scsi_Cmnd *, unsigned int);
-int aha1740_biosparam(struct scsi_device *, struct block_device *,
-		sector_t, int*);
-int aha1740_proc_info(char *buffer, char **start, off_t offset,
-                               int length, int hostno, int inout);
+static int aha1740_detect(Scsi_Host_Template *);
+static int aha1740_command(Scsi_Cmnd *);
+static int aha1740_queuecommand(Scsi_Cmnd *, void (*done) (Scsi_Cmnd *));
+static int aha1740_biosparam(struct scsi_device *, struct block_device *, sector_t, int *);
+static int aha1740_proc_info(char *buffer, char **start, off_t offset, int length, int hostno, int inout);
 
 #define AHA1740_ECBS 32
 #define AHA1740_SCATTER 16
 #define AHA1740_CMDLUN 1
 
-#ifndef NULL
-	#define NULL 0
-#endif
-
 #define AHA1740 {  proc_name:      "aha1740",				\
 		   proc_info:      aha1740_proc_info,	                \
 		   name:           "Adaptec 174x (EISA)",		\
 		   detect:         aha1740_detect,			\
 		   command:        aha1740_command,			\
 		   queuecommand:   aha1740_queuecommand,		\
-		   abort:          aha1740_abort,			\
-		   reset:          aha1740_reset,			\
 		   bios_param:     aha1740_biosparam,                   \
 		   can_queue:      AHA1740_ECBS, 			\
 		   this_id:        7, 					\

drivers/scsi/eata.c

@@ -476,7 +476,6 @@ MODULE_AUTHOR("Dario Ballabio");
 #include <linux/blk.h>
 #include "scsi.h"
 #include "hosts.h"
-#include "sd.h"
 #include <asm/dma.h>
 #include <asm/irq.h>
 #include "eata.h"
@@ -1838,7 +1837,7 @@ int eata2x_bios_param(struct scsi_device *sdev, struct block_device *bdev,
 		sector_t capacity, int *dkinfo) {
    int size = capacity;
 
-   if (ext_tran || (scsicam_bios_param(disk, bdev, dkinfo) < 0)) {
+   if (ext_tran || (scsicam_bios_param(bdev, capacity, dkinfo) < 0)) {
       dkinfo[0] = 255;
       dkinfo[1] = 63;
       dkinfo[2] = size / (dkinfo[0] * dkinfo[1]);

drivers/scsi/eata.h

@@ -18,8 +18,6 @@ static int eata2x_slave_attach(Scsi_Device *);
                 detect:                  eata2x_detect,                      \
                 release:                 eata2x_release,                     \
                 queuecommand:            eata2x_queuecommand,                \
-                abort:                   NULL,                               \
-                reset:                   NULL,                               \
                 eh_abort_handler:        eata2x_eh_abort,                    \
                 eh_device_reset_handler: NULL,                               \
                 eh_bus_reset_handler:    NULL,                               \

drivers/scsi/eata_pio.h

@@ -2,7 +2,7 @@
 * Header file for eata_pio.c Linux EATA-PIO SCSI driver *
 * (c) 1993-96 Michael Neuffer  	                        *
 *********************************************************
-* last change: 96/05/05					*
+* last change: 2002/11/02				*
 ********************************************************/
 
 
@@ -14,7 +14,6 @@
 #include "hosts.h"
 #include <scsi/scsicam.h>
 
-#ifndef HOSTS_C
 #include "eata_generic.h"
 
 #define VER_MAJOR 0
@@ -25,82 +24,55 @@
  * Here you can switch parts of the code on and of			*
  ************************************************************************/
 
-#define VERBOSE_SETUP			/* show startup screen of 2001 */
+#define VERBOSE_SETUP		/* show startup screen of 2001 */
 #define ALLOW_DMA_BOARDS 1
 
 /************************************************************************
  * Debug options.							* 
  * Enable DEBUG and whichever options you require.			*
  ************************************************************************/
-#define DEBUG_EATA	1   /* Enable debug code.			*/
-#define DPT_DEBUG	0   /* Bobs special				*/
-#define DBG_DELAY	0   /* Build in delays so debug messages can be
-                             * be read before they vanish of the top of
-                             * the screen!
-                             */
-#define DBG_PROBE	0   /* Debug probe routines.			*/
-#define DBG_ISA		0   /* Trace ISA routines			*/ 
-#define DBG_EISA	0   /* Trace EISA routines			*/ 
-#define DBG_PCI		0   /* Trace PCI routines			*/ 
-#define DBG_PIO		0   /* Trace get_config_PIO			*/
-#define DBG_COM		0   /* Trace command call			*/
-#define DBG_QUEUE	0   /* Trace command queueing.			*/
-#define DBG_INTR	0   /* Trace interrupt service routine.		*/
-#define DBG_INTR2	0   /* Trace interrupt service routine.		*/
-#define DBG_PROC	0   /* Debug proc-fs related statistics		*/
+#define DEBUG_EATA	1	/* Enable debug code.                       */
+#define DPT_DEBUG	0	/* Bobs special                             */
+#define DBG_DELAY	0	/* Build in delays so debug messages can be
+				 * be read before they vanish of the top of
+				 * the screen!
+				 */
+#define DBG_PROBE	0	/* Debug probe routines.                    */
+#define DBG_ISA		0	/* Trace ISA routines                       */
+#define DBG_EISA	0	/* Trace EISA routines                      */
+#define DBG_PCI		0	/* Trace PCI routines                       */
+#define DBG_PIO		0	/* Trace get_config_PIO                     */
+#define DBG_COM		0	/* Trace command call                       */
+#define DBG_QUEUE	0	/* Trace command queueing.                  */
+#define DBG_INTR	0	/* Trace interrupt service routine.         */
+#define DBG_INTR2	0	/* Trace interrupt service routine.         */
+#define DBG_PROC	0	/* Debug proc-fs related statistics         */
 #define DBG_PROC_WRITE	0
-#define DBG_REGISTER	0   /* */
-#define DBG_ABNORM	1   /* Debug abnormal actions (reset, abort)	*/
+#define DBG_REGISTER	0	/* */
+#define DBG_ABNORM	1	/* Debug abnormal actions (reset, abort)    */
 
-#if DEBUG_EATA 
-#define DBG(x, y)   if ((x)) {y;} 
+#if DEBUG_EATA
+#define DBG(x, y)   if ((x)) {y;}
 #else
 #define DBG(x, y)
 #endif
 
-#endif /* !HOSTS_C */
+static int eata_pio_detect(Scsi_Host_Template *);
+static int eata_pio_queue(Scsi_Cmnd *, void (*done) (Scsi_Cmnd *));
+static int eata_pio_abort(Scsi_Cmnd *);
+static int eata_pio_host_reset(Scsi_Cmnd *);
+static int eata_pio_proc_info(char *, char **, off_t, int, int, int);
+static int eata_pio_release(struct Scsi_Host *);
 
-int eata_pio_detect(Scsi_Host_Template *);
-const char *eata_pio_info(struct Scsi_Host *);
-int eata_pio_command(Scsi_Cmnd *);
-int eata_pio_queue(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
-int eata_pio_abort(Scsi_Cmnd *);
-int eata_pio_reset(Scsi_Cmnd *, unsigned int);
-int eata_pio_proc_info(char *, char **, off_t, int, int, int);
-#ifdef MODULE
-int eata_pio_release(struct Scsi_Host *);
-#else
-#define eata_pio_release NULL  
-#endif
-
-
-#define EATA_PIO {						\
-    proc_info:         eata_pio_proc_info, /* procinfo	  */	\
-    name:              "EATA (Extended Attachment) PIO driver",	\
-    detect:            eata_pio_detect,				\
-    release:           eata_pio_release,			\
-    queuecommand:      eata_pio_queue,				\
-    abort:             eata_pio_abort,				\
-    reset:             eata_pio_reset,				\
-    unchecked_isa_dma: 1,	    /* True if ISA  */		\
-    use_clustering:    ENABLE_CLUSTERING }
-
-#endif /* _EATA_PIO_H */
+#define EATA_PIO {							\
+	proc_info:         	eata_pio_proc_info, /* procinfo	  */	\
+	name:              	"EATA (Extended Attachment) PIO driver",\
+	detect:            	eata_pio_detect,			\
+	release:           	eata_pio_release,			\
+	queuecommand:      	eata_pio_queue,				\
+	eh_abort_handler:  	eata_pio_abort,				\
+	eh_host_reset_handler:	eata_pio_host_reset,			\
+	use_clustering:    	ENABLE_CLUSTERING 			\
+}
 
-/*
- * Overrides for Emacs so that we almost follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 4
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -4
- * c-argdecl-indent: 4
- * c-label-offset: -4
- * c-continued-statement-offset: 4
- * c-continued-brace-offset: 0
- * tab-width: 8
- * End:
- */
+#endif				/* _EATA_PIO_H */

drivers/scsi/fd_mcs.c

@@ -1325,118 +1325,115 @@ static int fd_mcs_host_reset(Scsi_Cmnd * SCpnt)
 	return FAILED;
 }
 
-static int fd_mcs_device_reset(Scsi_Cmnd * SCpnt) {
-		return FAILED;
-	}
+static int fd_mcs_device_reset(Scsi_Cmnd * SCpnt) 
+{
+	return FAILED;
+}
 
-	static int fd_mcs_bus_reset(Scsi_Cmnd * SCpnt) {
-		struct Scsi_Host *shpnt = SCpnt->host;
-		unsigned long flags;
+static int fd_mcs_bus_reset(Scsi_Cmnd * SCpnt) {
+	struct Scsi_Host *shpnt = SCpnt->host;
 
 #if DEBUG_RESET
-		static int called_once = 0;
+	static int called_once = 0;
 #endif
 
 #if ERRORS_ONLY
-		if (SCpnt)
-			printk("fd_mcs: SCSI Bus Reset\n");
+	if (SCpnt)
+		printk("fd_mcs: SCSI Bus Reset\n");
 #endif
 
 #if DEBUG_RESET
-		if (called_once)
-			fd_mcs_print_info(current_SC);
-		called_once = 1;
+	if (called_once)
+		fd_mcs_print_info(current_SC);
+	called_once = 1;
 #endif
 
-		spin_lock_irqsave(shpnt->host_lock, flags);
-
-		outb(1, SCSI_Cntl_port);
-		do_pause(2);
-		outb(0, SCSI_Cntl_port);
-		do_pause(115);
-		outb(0, SCSI_Mode_Cntl_port);
-		outb(PARITY_MASK, TMC_Cntl_port);
-
-		/* Unless this is the very first call (i.e., SCPnt == NULL), everything
-		   is probably hosed at this point.  We will, however, try to keep
-		   things going by informing the high-level code that we need help. */
+	outb(1, SCSI_Cntl_port);
+	do_pause(2);
+	outb(0, SCSI_Cntl_port);
+	do_pause(115);
+	outb(0, SCSI_Mode_Cntl_port);
+	outb(PARITY_MASK, TMC_Cntl_port);
 
-		spin_unlock_irqrestore(shpnt->host_lock, flags);
+	/* Unless this is the very first call (i.e., SCPnt == NULL), everything
+	   is probably hosed at this point.  We will, however, try to keep
+	   things going by informing the high-level code that we need help. */
 		return SUCCESS;
-	}
+}
 
 #include <scsi/scsi_ioctl.h>
 
-	static int fd_mcs_biosparam(Scsi_Disk * disk, struct block_device *bdev,
-				    sector_t capacity, int *info_array) {
-		unsigned char buf[512 + sizeof(int) * 2];
-		int size = capacity;
-		int *sizes = (int *) buf;
-		unsigned char *data = (unsigned char *) (sizes + 2);
-		unsigned char do_read[] = { READ_6, 0, 0, 0, 1, 0 };
-		int retcode;
-
-		/* BIOS >= 3.4 for MCA cards */
-		/* This algorithm was provided by Future Domain (much thanks!). */
-
-		sizes[0] = 0;	/* zero bytes out */
-		sizes[1] = 512;	/* one sector in */
-		memcpy(data, do_read, sizeof(do_read));
-		retcode = kernel_scsi_ioctl(disk->device, SCSI_IOCTL_SEND_COMMAND, (void *) buf);
-		if (!retcode	/* SCSI command ok */
-		    && data[511] == 0xaa && data[510] == 0x55	/* Partition table valid */
-		    && data[0x1c2]) {	/* Partition type */
-
-			/* The partition table layout is as follows:
-
-			   Start: 0x1b3h
-			   Offset: 0 = partition status
-			   1 = starting head
-			   2 = starting sector and cylinder (word, encoded)
-			   4 = partition type
-			   5 = ending head
-			   6 = ending sector and cylinder (word, encoded)
-			   8 = starting absolute sector (double word)
-			   c = number of sectors (double word)
-			   Signature: 0x1fe = 0x55aa
-
-			   So, this algorithm assumes:
-			   1) the first partition table is in use,
-			   2) the data in the first entry is correct, and
-			   3) partitions never divide cylinders
-
-			   Note that (1) may be FALSE for NetBSD (and other BSD flavors),
-			   as well as for Linux.  Note also, that Linux doesn't pay any
-			   attention to the fields that are used by this algorithm -- it
-			   only uses the absolute sector data.  Recent versions of Linux's
-			   fdisk(1) will fill this data in correctly, and forthcoming
-			   versions will check for consistency.
-
-			   Checking for a non-zero partition type is not part of the
-			   Future Domain algorithm, but it seemed to be a reasonable thing
-			   to do, especially in the Linux and BSD worlds. */
-
-			info_array[0] = data[0x1c3] + 1;	/* heads */
-			info_array[1] = data[0x1c4] & 0x3f;	/* sectors */
+static int fd_mcs_biosparam(struct scsi_device * disk, struct block_device *bdev,
+			    sector_t capacity, int *info_array) 
+{
+	unsigned char buf[512 + sizeof(int) * 2];
+	int size = capacity;
+	int *sizes = (int *) buf;
+	unsigned char *data = (unsigned char *) (sizes + 2);
+	unsigned char do_read[] = { READ_6, 0, 0, 0, 1, 0 };
+	int retcode;
+
+	/* BIOS >= 3.4 for MCA cards */
+	/* This algorithm was provided by Future Domain (much thanks!). */
+
+	sizes[0] = 0;	/* zero bytes out */
+	sizes[1] = 512;	/* one sector in */
+	memcpy(data, do_read, sizeof(do_read));
+	retcode = kernel_scsi_ioctl(disk, SCSI_IOCTL_SEND_COMMAND, (void *) buf);
+	if (!retcode	/* SCSI command ok */
+	    && data[511] == 0xaa && data[510] == 0x55	/* Partition table valid */
+	    && data[0x1c2]) {	/* Partition type */
+		/* The partition table layout is as follows:
+
+		   Start: 0x1b3h
+		   Offset: 0 = partition status
+		   1 = starting head
+		   2 = starting sector and cylinder (word, encoded)
+		   4 = partition type
+		   5 = ending head
+		   6 = ending sector and cylinder (word, encoded)
+		   8 = starting absolute sector (double word)
+		   c = number of sectors (double word)
+		   Signature: 0x1fe = 0x55aa
+
+		   So, this algorithm assumes:
+		   1) the first partition table is in use,
+		   2) the data in the first entry is correct, and
+		   3) partitions never divide cylinders
+
+		   Note that (1) may be FALSE for NetBSD (and other BSD flavors),
+		   as well as for Linux.  Note also, that Linux doesn't pay any
+		   attention to the fields that are used by this algorithm -- it
+		   only uses the absolute sector data.  Recent versions of Linux's
+		   fdisk(1) will fill this data in correctly, and forthcoming
+		   versions will check for consistency.
+
+		   Checking for a non-zero partition type is not part of the
+		   Future Domain algorithm, but it seemed to be a reasonable thing
+		   to do, especially in the Linux and BSD worlds. */
+
+		info_array[0] = data[0x1c3] + 1;	/* heads */
+		info_array[1] = data[0x1c4] & 0x3f;	/* sectors */
+	} else {
+		/* Note that this new method guarantees that there will always be
+		   less than 1024 cylinders on a platter.  This is good for drives
+		   up to approximately 7.85GB (where 1GB = 1024 * 1024 kB). */
+		if ((unsigned int) size >= 0x7e0000U) 
+		{
+			info_array[0] = 0xff;	/* heads   = 255 */
+			info_array[1] = 0x3f;	/* sectors =  63 */
+		} else if ((unsigned int) size >= 0x200000U) {
+			info_array[0] = 0x80;	/* heads   = 128 */
+			info_array[1] = 0x3f;	/* sectors =  63 */
 		} else {
-
-			/* Note that this new method guarantees that there will always be
-			   less than 1024 cylinders on a platter.  This is good for drives
-			   up to approximately 7.85GB (where 1GB = 1024 * 1024 kB). */
-
-			if ((unsigned int) size >= 0x7e0000U) {
-				info_array[0] = 0xff;	/* heads   = 255 */
-				info_array[1] = 0x3f;	/* sectors =  63 */
-			} else if ((unsigned int) size >= 0x200000U) {
-				info_array[0] = 0x80;	/* heads   = 128 */
-				info_array[1] = 0x3f;	/* sectors =  63 */
-			} else {
-				info_array[0] = 0x40;	/* heads   =  64 */
-				info_array[1] = 0x20;	/* sectors =  32 */
-			}
+			info_array[0] = 0x40;	/* heads   =  64 */
+			info_array[1] = 0x20;	/* sectors =  32 */
 		}
-		/* For both methods, compute the cylinders */
-		info_array[2] = (unsigned int) size / (info_array[0] * info_array[1]);
+	}
+	/* For both methods, compute the cylinders */
+	info_array[2] = (unsigned int) size / (info_array[0] * info_array[1]);
+	return 0;
+}
 
 /* Eventually this will go into an include file, but this will be later */
 	static Scsi_Host_Template driver_template = FD_MCS;

drivers/scsi/fd_mcs.h

@@ -30,7 +30,7 @@ static int fd_mcs_bus_reset(Scsi_Cmnd *);
 static int fd_mcs_device_reset(Scsi_Cmnd *);
 static int fd_mcs_host_reset(Scsi_Cmnd *);
 static int fd_mcs_queue(Scsi_Cmnd *, void (*done) (Scsi_Cmnd *));
-static int fd_mcs_biosparam(Disk *, struct block_device *,
+static int fd_mcs_biosparam(struct scsi_device *, struct block_device *,
 			    sector_t, int *);
 static int fd_mcs_proc_info(char *, char **, off_t, int, int, int);
 static const char *fd_mcs_info(struct Scsi_Host *);

drivers/scsi/g_NCR5380.h

@@ -54,7 +54,7 @@ static int generic_NCR5380_device_reset(Scsi_Cmnd *);
 static int notyet_generic_proc_info (char *buffer ,char **start, off_t offset,
                      int length, int hostno, int inout);
 static const char* generic_NCR5380_info(struct Scsi_Host *);
-static int generic_NCR5380_biosparam(Disk *, struct block_device *, sector_t, int *);
+static int generic_NCR5380_biosparam(struct scsi_device *, struct block_device *, sector_t, int *);
 static int generic_NCR5380_proc_info(char* buffer, char** start, off_t offset, int length, int hostno, int inout);
 
 #ifndef CMD_PER_LUN

drivers/scsi/hosts.h

@@ -192,7 +192,7 @@ typedef struct	SHT
 
     /*
      * Old EH handlers, no longer used. Make them warn the user of old
-     * drivers by using a wrogn type
+     * drivers by using a wrong type
      */
     int (*abort)(int);
     int (*reset)(int,int);

drivers/scsi/ibmmca.h

@@ -10,18 +10,14 @@
 /* Common forward declarations for all Linux-versions: */
 
 /* Interfaces to the midlevel Linux SCSI driver */
-extern int ibmmca_proc_info (char *, char **, off_t, int, int, int);
-extern int ibmmca_detect (Scsi_Host_Template *);
-extern int ibmmca_release (struct Scsi_Host *);
-extern int ibmmca_command (Scsi_Cmnd *);
-extern int ibmmca_queuecommand (Scsi_Cmnd *, void (*done) (Scsi_Cmnd *));
-extern int ibmmca_abort (Scsi_Cmnd *);
-extern int ibmmca_reset (Scsi_Cmnd *, unsigned int);
-extern int ibmmca_biosparam (struct scsi_device *, struct block_device *,
-		sector_t, int *);
-
-/*structure for /proc filesystem */
-extern struct proc_dir_entry proc_scsi_ibmmca;
+static int ibmmca_proc_info (char *, char **, off_t, int, int, int);
+static int ibmmca_detect (Scsi_Host_Template *);
+static int ibmmca_release (struct Scsi_Host *);
+static int ibmmca_command (Scsi_Cmnd *);
+static int ibmmca_queuecommand (Scsi_Cmnd *, void (*done) (Scsi_Cmnd *));
+static int ibmmca_abort (Scsi_Cmnd *);
+static int ibmmca_host_reset (Scsi_Cmnd *);
+static int ibmmca_biosparam (struct scsi_device *, struct block_device *, sector_t, int *);
 
 /*
  * 2/8/98
@@ -37,8 +33,8 @@ extern struct proc_dir_entry proc_scsi_ibmmca;
           release:        ibmmca_release,       /*release fn*/        \
           command:        ibmmca_command,       /*command fn*/        \
           queuecommand:   ibmmca_queuecommand,  /*queuecommand fn*/   \
-          abort:          ibmmca_abort,         /*abort fn*/          \
-          reset:          ibmmca_reset,         /*reset fn*/          \
+	  eh_abort_handler:ibmmca_abort,         /*abort fn*/          \
+	  eh_host_reset_handler:ibmmca_host_reset,         /*reset fn*/          \
           bios_param:     ibmmca_biosparam,     /*bios fn*/           \
           can_queue:      16,                   /*can_queue*/         \
           this_id:        7,                    /*set by detect*/     \

drivers/scsi/pcmcia/nsp_cs.h

@@ -10,7 +10,7 @@
 
 =========================================================*/
 
-/* $Id: nsp_cs.h,v 1.3 2002/10/10 11:07:52 elca Exp $ */
+/* $Id: nsp_cs.h,v 1.4 2002/11/05 12:06:29 elca Exp $ */
 
 #ifndef  __nsp_cs__
 #define  __nsp_cs__
@@ -26,7 +26,7 @@
 /************************************
  * Some useful macros...
  */
-#define Number(arr) ((int) (sizeof(arr) / sizeof(arr[0])))
+#define NUMBER(arr) ((int) (sizeof(arr) / sizeof(arr[0]))) /* from XtNumber() in /usr/X11R6/include/X11/Intrinsic.h */
 #define BIT(x)      (1L << (x))
 #define MIN(a,b)    ((a) > (b) ? (b) : (a))
 
@@ -270,10 +270,10 @@ typedef struct _nsp_hw_data {
 
 
 
-static void nsp_cs_release(u_long arg);
-static int nsp_cs_event(event_t event, int priority, event_callback_args_t *args);
+static void        nsp_cs_release(u_long arg);
+static int         nsp_cs_event(event_t event, int priority, event_callback_args_t *args);
 static dev_link_t *nsp_cs_attach(void);
-static void nsp_cs_detach(dev_link_t *);
+static void        nsp_cs_detach(dev_link_t *);
 
 static unsigned int nsphw_start_selection(Scsi_Cmnd *SCpnt, nsp_hw_data *data);
 static void nsp_start_timer(Scsi_Cmnd *SCpnt, nsp_hw_data *data, int time);
@@ -285,9 +285,6 @@ static int nsp_proc_info(char *buffer, char **start, off_t offset,
 			 int length, int hostno, int inout);
 static int nsp_queuecommand(Scsi_Cmnd *, void (* done)(Scsi_Cmnd *));
 
-static int nsp_abort(Scsi_Cmnd *);
-static int nsp_reset(Scsi_Cmnd *, unsigned int);
-
 /*static int nsp_eh_abort(Scsi_Cmnd * SCpnt);*/
 /*static int nsp_eh_device_reset(Scsi_Cmnd *SCpnt);*/
 static int nsp_eh_bus_reset(Scsi_Cmnd *SCpnt);

drivers/scsi/pcmcia/nsp_message.c

@@ -64,7 +64,7 @@ static void nsp_message_out(Scsi_Cmnd *SCpnt, nsp_hw_data *data)
 	DEBUG(0, " msgout loop\n");
 	do {
 		if (nsp_xfer(SCpnt, data, BUSPHASE_MESSAGE_OUT)) {
-			printk(KERN_DEBUG " %s msgout: xfer short\n", __FUNCTION__);
+			printk(KERN_DEBUG " %s: msgout: xfer short\n", __FUNCTION__);
 		}
 
 		/* catch a next signal */

drivers/scsi/qlogicfas.c

@@ -613,7 +613,7 @@ int qlogicfas_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
 #ifdef PCMCIA
 
 /*
- *	Allow PCMCIA code to preset the port */
+ *	Allow PCMCIA code to preset the port
  *	port should be 0 and irq to -1 respectively for autoprobing 
  */
 

drivers/scsi/u14-34f.c

@@ -1486,16 +1486,16 @@ static int u14_34f_eh_host_reset(Scsi_Cmnd *SCarg) {
    return SUCCESS;
 }
 
-static int u14_34f_bios_param(Disk *disk, struct block_device *bdev,
-                                                          int *dkinfo) {
+static int u14_34f_bios_param(struct scsi_device *disk, struct block_device *bdev,
+	sector_t capacity, int *dkinfo) {
    unsigned int j = 0;
-   int size = disk->capacity;
+   unsigned int size = capacity;
 
    dkinfo[0] = HD(j)->heads;
    dkinfo[1] = HD(j)->sectors;
    dkinfo[2] = size / (HD(j)->heads * HD(j)->sectors);
 
-   if (ext_tran && (scsicam_bios_param(disk, bdev, dkinfo) < 0)) {
+   if (ext_tran && (scsicam_bios_param(bdev, capacity, dkinfo) < 0)) {
       dkinfo[0] = 255;
       dkinfo[1] = 63;
       dkinfo[2] = size / (dkinfo[0] * dkinfo[1]);

drivers/scsi/u14-34f.h

@@ -7,7 +7,7 @@ static int u14_34f_release(struct Scsi_Host *);
 static int u14_34f_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
 static int u14_34f_eh_abort(Scsi_Cmnd *);
 static int u14_34f_eh_host_reset(Scsi_Cmnd *);
-static int u14_34f_bios_param(Disk *, struct block_device *, int *);
+static int u14_34f_bios_param(struct scsi_device *, struct block_device *, sector_t, int *);
 static int u14_34f_slave_attach(Scsi_Device *);
 
 #define U14_34F_VERSION "8.00.00"
@@ -17,8 +17,6 @@ static int u14_34f_slave_attach(Scsi_Device *);
                 detect:                  u14_34f_detect,                     \
                 release:                 u14_34f_release,                    \
                 queuecommand:            u14_34f_queuecommand,               \
-                abort:                   NULL,                               \
-                reset:                   NULL,                               \
                 eh_abort_handler:        u14_34f_eh_abort,                   \
                 eh_device_reset_handler: NULL,                               \
                 eh_bus_reset_handler:    NULL,                               \

drivers/scsi/ultrastor.h

@@ -13,13 +13,12 @@
 #ifndef _ULTRASTOR_H
 #define _ULTRASTOR_H
 
-int ultrastor_detect(Scsi_Host_Template *);
-const char *ultrastor_info(struct Scsi_Host * shpnt);
-int ultrastor_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
-int ultrastor_abort(Scsi_Cmnd *);
-int ultrastor_reset(Scsi_Cmnd *, unsigned int);
-int ultrastor_biosparam(struct scsi_device *, struct block_device *,
-		sector_t, int *);
+static int ultrastor_detect(Scsi_Host_Template *);
+static const char *ultrastor_info(struct Scsi_Host * shpnt);
+static int ultrastor_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+static int ultrastor_abort(Scsi_Cmnd *);
+static int ultrastor_host_reset(Scsi_Cmnd *);
+static int ultrastor_biosparam(struct scsi_device *, struct block_device *, sector_t, int *);
 
 
 #define ULTRASTOR_14F_MAX_SG 16
@@ -35,8 +34,8 @@ int ultrastor_biosparam(struct scsi_device *, struct block_device *,
 			  detect:            ultrastor_detect, 		\
 			  info:              ultrastor_info, 		\
 			  queuecommand:      ultrastor_queuecommand,	\
-			  abort:             ultrastor_abort, 		\
-			  reset:             ultrastor_reset,		\
+			  eh_abort_handler:  ultrastor_abort, 		\
+			  eh_host_reset_handler:  ultrastor_host_reset,	\
 			  bios_param:        ultrastor_biosparam, 	\
 			  can_queue:         ULTRASTOR_MAX_CMDS,	\
 			  this_id:           0, 			\

drivers/scsi/wd7000.c

@@ -1240,7 +1240,7 @@ static int wd7000_adapter_reset(Adapter * host)
 	host->control = 0;	/* this must always shadow ASC_CONTROL */
 
 	if (WAIT(host->iobase + ASC_STAT, ASC_STATMASK, CMD_RDY, 0)) {
-		printk("wd7000_init: WAIT timed out.\n");
+		printk(KERN_ERR "wd7000_init: WAIT timed out.\n");
 		return -1;	/* -1 = not ok */
 	}
 
@@ -1249,25 +1249,25 @@ static int wd7000_adapter_reset(Adapter * host)
 
 		switch (diag) {
 		case 2:
-			printk("RAM failure.\n");
+			printk(KERN_ERR "RAM failure.\n");
 			break;
 		case 3:
-			printk("FIFO R/W failed\n");
+			printk(KERN_ERR "FIFO R/W failed\n");
 			break;
 		case 4:
-			printk("SBIC register R/W failed\n");
+			printk(KERN_ERR "SBIC register R/W failed\n");
 			break;
 		case 5:
-			printk("Initialization D-FF failed.\n");
+			printk(KERN_ERR "Initialization D-FF failed.\n");
 			break;
 		case 6:
-			printk("Host IRQ D-FF failed.\n");
+			printk(KERN_ERR "Host IRQ D-FF failed.\n");
 			break;
 		case 7:
-			printk("ROM checksum error.\n");
+			printk(KERN_ERR "ROM checksum error.\n");
 			break;
 		default:
-			printk("diagnostic code 0x%02Xh received.\n", diag);
+			printk(KERN_ERR "diagnostic code 0x%02Xh received.\n", diag);
 		}
 		return -1;
 	}

fs/intermezzo/vfs.c

@@ -74,7 +74,7 @@
 #ifdef CONFIG_FS_EXT_ATTR
 # include <linux/ext_attr.h>
 
-# ifdef CONFIG_FS_POSIX_ACL
+# if 0 /* was a broken check for Posix ACLs */
 #  include <linux/posix_acl.h>
 # endif
 #endif
@@ -466,7 +466,7 @@ int lento_setattr(const char *name, struct iattr *iattr,
         struct dentry *dentry;
         struct presto_file_set *fset;
         int error;
-#ifdef  CONFIG_FS_POSIX_ACL
+#if 0 /* was a broken check for Posix ACLs */
         int (*set_posix_acl)(struct inode *, int type, posix_acl_t *)=NULL;
 #endif
 
@@ -507,7 +507,7 @@ int lento_setattr(const char *name, struct iattr *iattr,
                                  (dentry->d_inode->i_mode & ~S_IALLUGO);
                 CDEBUG(D_PIOCTL, "chmod: orig %#o, set %#o, result %#o\n",
                        dentry->d_inode->i_mode, set_mode, iattr->ia_mode);
-#ifdef CONFIG_FS_POSIX_ACL
+#if 0 /* was a broken check for Posix ACLs */
                 /* ACl code interacts badly with setattr 
                  * since it tries to modify the ACL using 
                  * set_ext_attr which recurses back into presto.  
@@ -535,7 +535,7 @@ int lento_setattr(const char *name, struct iattr *iattr,
                 }
         }
 
-#ifdef CONFIG_FS_POSIX_ACL
+#if 0 /* was a broken check for Posix ACLs */
         /* restore the inode_operations if we changed them*/
         if (iattr->ia_valid & ATTR_MODE) 
                 dentry->d_inode->i_op->set_posix_acl=set_posix_acl;
@@ -2252,7 +2252,7 @@ int lento_iopen(const char *name, ino_t ino, unsigned int generation,
 
 #ifdef CONFIG_FS_EXT_ATTR
 
-#ifdef CONFIG_FS_POSIX_ACL
+#if 0 /* was a broken check for Posix ACLs */
 /* Posix ACL code changes i_mode without using a notify_change (or
  * a mark_inode_dirty!). We need to duplicate this at the reintegrator
  * which is done by this function. This function also takes care of 
@@ -2395,7 +2395,7 @@ int presto_do_set_ext_attr(struct presto_file_set *fset,
                 goto exit;
         }
 
-#ifdef CONFIG_FS_POSIX_ACL
+#if 0 /* was a broken check for Posix ACLs */
         /* Reset mode if specified*/
         /* XXX: when we do native acl support, move this code out! */
         if (mode != NULL) {