Commit 65cc0fa3 authored by Scott Wood's avatar Scott Wood Committed by Kumar Gala

powerpc/pq2fads: Update device tree for use with device-tree-aware u-boot.

Add aliases, and correct CS0 offset to match how u-boot
programs it (this was not a problem with cuImage because
the wrapper would reprogram the localbus to match the device
tree).
Signed-off-by: default avatarScott Wood <scottwood@freescale.com>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent 4d8107f4
......@@ -17,6 +17,14 @@ / {
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
......@@ -45,7 +53,7 @@ localbus@f0010100 {
#size-cells = <1>;
reg = <0xf0010100 0x60>;
ranges = <0x0 0x0 0xfe000000 0x800000
ranges = <0x0 0x0 0xff800000 0x800000
0x1 0x0 0xf4500000 0x8000
0x8 0x0 0xf8200000 0x8000>;
......@@ -71,7 +79,7 @@ PCI_PIC: pic@8,0 {
};
};
pci@f0010800 {
pci0: pci@f0010800 {
device_type = "pci";
reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>;
compatible = "fsl,mpc8280-pci", "fsl,pq2-pci";
......@@ -142,7 +150,7 @@ brg@119f0 {
reg = <0x119f0 0x10 0x115f0 0x10>;
};
serial@11a00 {
serial0: serial@11a00 {
device_type = "serial";
compatible = "fsl,mpc8280-scc-uart",
"fsl,cpm2-scc-uart";
......@@ -153,7 +161,7 @@ serial@11a00 {
fsl,cpm-command = <0x800000>;
};
serial@11a20 {
serial1: serial@11a20 {
device_type = "serial";
compatible = "fsl,mpc8280-scc-uart",
"fsl,cpm2-scc-uart";
......@@ -164,7 +172,7 @@ serial@11a20 {
fsl,cpm-command = <0x4a00000>;
};
ethernet@11320 {
enet0: ethernet@11320 {
device_type = "network";
compatible = "fsl,mpc8280-fcc-enet",
"fsl,cpm2-fcc-enet";
......@@ -176,7 +184,7 @@ ethernet@11320 {
fsl,cpm-command = <0x16200300>;
};
ethernet@11340 {
enet1: ethernet@11340 {
device_type = "network";
compatible = "fsl,mpc8280-fcc-enet",
"fsl,cpm2-fcc-enet";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment