Merge branch 'tg3-fixes'

Siva Reddy Kallam says:

====================
tg3: update on copyright and couple of fixes

First patch:
	Update copyright

Second patch:
	Add workaround to restrict 5762 MRRS

Third patch:
	Add PHY reset in change MTU path for 5720
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/tg3.c

@@ -4,11 +4,13 @@
  * Copyright (C) 2001, 2002, 2003, 2004 David S. Miller (davem@redhat.com)
  * Copyright (C) 2001, 2002, 2003 Jeff Garzik (jgarzik@pobox.com)
  * Copyright (C) 2004 Sun Microsystems Inc.
- * Copyright (C) 2005-2014 Broadcom Corporation.
+ * Copyright (C) 2005-2016 Broadcom Corporation.
+ * Copyright (C) 2016-2017 Broadcom Limited.
  *
  * Firmware is:
  *	Derived from proprietary unpublished source code,
- *	Copyright (C) 2000-2003 Broadcom Corporation.
+ *	Copyright (C) 2000-2016 Broadcom Corporation.
+ *	Copyright (C) 2016-2017 Broadcom Ltd.
  *
  *	Permission is hereby granted for the distribution of this firmware
  *	data in hexadecimal or equivalent format, provided this copyright
@@ -10052,6 +10054,16 @@ static int tg3_reset_hw(struct tg3 *tp, bool reset_phy)
 
 	tw32(GRC_MODE, tp->grc_mode | val);
 
+	/* On one of the AMD platform, MRRS is restricted to 4000 because of
+	 * south bridge limitation. As a workaround, Driver is setting MRRS
+	 * to 2048 instead of default 4096.
+	 */
+	if (tp->pdev->subsystem_vendor == PCI_VENDOR_ID_DELL &&
+	    tp->pdev->subsystem_device == TG3PCI_SUBDEVICE_ID_DELL_5762) {
+		val = tr32(TG3PCI_DEV_STATUS_CTRL) & ~MAX_READ_REQ_MASK;
+		tw32(TG3PCI_DEV_STATUS_CTRL, val | MAX_READ_REQ_SIZE_2048);
+	}
+
 	/* Setup the timer prescalar register.  Clock is always 66Mhz. */
 	val = tr32(GRC_MISC_CFG);
 	val &= ~0xff;
@@ -14227,7 +14239,8 @@ static int tg3_change_mtu(struct net_device *dev, int new_mtu)
 	 */
 	if (tg3_asic_rev(tp) == ASIC_REV_57766 ||
 	    tg3_asic_rev(tp) == ASIC_REV_5717 ||
-	    tg3_asic_rev(tp) == ASIC_REV_5719)
+	    tg3_asic_rev(tp) == ASIC_REV_5719 ||
+	    tg3_asic_rev(tp) == ASIC_REV_5720)
 		reset_phy = true;
 
 	err = tg3_restart_hw(tp, reset_phy);

drivers/net/ethernet/broadcom/tg3.h

@@ -5,7 +5,8 @@
  * Copyright (C) 2001, 2002, 2003, 2004 David S. Miller (davem@redhat.com)
  * Copyright (C) 2001 Jeff Garzik (jgarzik@pobox.com)
  * Copyright (C) 2004 Sun Microsystems Inc.
- * Copyright (C) 2007-2014 Broadcom Corporation.
+ * Copyright (C) 2007-2016 Broadcom Corporation.
+ * Copyright (C) 2016-2017 Broadcom Limited.
  */
 
 #ifndef _T3_H
@@ -96,6 +97,7 @@
 #define TG3PCI_SUBDEVICE_ID_DELL_JAGUAR		0x0106
 #define TG3PCI_SUBDEVICE_ID_DELL_MERLOT		0x0109
 #define TG3PCI_SUBDEVICE_ID_DELL_SLIM_MERLOT	0x010a
+#define TG3PCI_SUBDEVICE_ID_DELL_5762		0x07f0
 #define TG3PCI_SUBVENDOR_ID_COMPAQ		PCI_VENDOR_ID_COMPAQ
 #define TG3PCI_SUBDEVICE_ID_COMPAQ_BANSHEE	0x007c
 #define TG3PCI_SUBDEVICE_ID_COMPAQ_BANSHEE_2	0x009a
@@ -281,6 +283,9 @@
 #define TG3PCI_STD_RING_PROD_IDX	0x00000098 /* 64-bit */
 #define TG3PCI_RCV_RET_RING_CON_IDX	0x000000a0 /* 64-bit */
 /* 0xa8 --> 0xb8 unused */
+#define TG3PCI_DEV_STATUS_CTRL		0x000000b4
+#define  MAX_READ_REQ_SIZE_2048		 0x00004000
+#define  MAX_READ_REQ_MASK		 0x00007000
 #define TG3PCI_DUAL_MAC_CTRL		0x000000b8
 #define  DUAL_MAC_CTRL_CH_MASK		 0x00000003
 #define  DUAL_MAC_CTRL_ID		 0x00000004