Merge branch 'akpm' (patches from Andrew Morton)

Merge misc fixes from Andrew Morton:
 "A bunch of fixes"

* emailed patches fron Andrew Morton <akpm@linux-foundation.org>:
  ocfs2: check existence of old dentry in ocfs2_link()
  ocfs2: update inode size after zeroing the hole
  ocfs2: fix issue that ocfs2_setattr() does not deal with new_i_size==i_size
  mm/memory-failure.c: move refcount only in !MF_COUNT_INCREASED
  smp.h: fix x86+cpu.c sparse warnings about arch nonboot CPU calls
  mm: fix page leak at nfs_symlink()
  slub: do not assert not having lock in removing freed partial
  gitignore: add all.config
  ocfs2: fix ocfs2_sync_file() if filesystem is readonly
  drivers/edac/edac_mc_sysfs.c: poll timeout cannot be zero
  fs/file.c:fdtable: avoid triggering OOMs from alloc_fdmem
  xen: properly account for _PAGE_NUMA during xen pte translations
  mm/slub.c: list_lock may not be held in some circumstances
  drivers/md/bcache/extents.c: use %zi to format size_t
  vmcore: prevent PT_NOTE p_memsz overflow during header update
  drivers/message/i2o/i2o_config.c: fix deadlock in compat_ioctl(I2OGETIOPS)
  Documentation/: update 00-INDEX files
  checkpatch: fix detection of git repository
  get_maintainer: fix detection of git repository
  drivers/misc/sgi-gru/grukdump.c: unlocking should be conditional in gru_dump_context()

.gitignore

@@ -92,3 +92,6 @@ extra_certificates
 signing_key.priv
 signing_key.x509
 x509.genkey
+
+# Kconfig presets
+all.config

Documentation/00-INDEX

@@ -29,6 +29,8 @@ DMA-ISA-LPC.txt
 	- How to do DMA with ISA (and LPC) devices.
 DMA-attributes.txt
 	- listing of the various possible attributes a DMA region can have
+dmatest.txt
+	- how to compile, configure and use the dmatest system.
 DocBook/
 	- directory with DocBook templates etc. for kernel documentation.
 EDID/
@@ -77,6 +79,8 @@ arm/
 	- directory with info about Linux on the ARM architecture.
 arm64/
 	- directory with info about Linux on the 64 bit ARM architecture.
+assoc_array.txt
+	- generic associative array intro.
 atomic_ops.txt
 	- semantics and behavior of atomic and bitmask operations.
 auxdisplay/
@@ -87,6 +91,8 @@ bad_memory.txt
 	- how to use kernel parameters to exclude bad RAM regions.
 basic_profiling.txt
 	- basic instructions for those who wants to profile Linux kernel.
+bcache.txt
+	- Block-layer cache on fast SSDs to improve slow (raid) I/O performance.
 binfmt_misc.txt
 	- info on the kernel support for extra binary formats.
 blackfin/
@@ -171,6 +177,8 @@ early-userspace/
 	- info about initramfs, klibc, and userspace early during boot.
 edac.txt
 	- information on EDAC - Error Detection And Correction
+efi-stub.txt
+	- How to use the EFI boot stub to bypass GRUB or elilo on EFI systems.
 eisa.txt
 	- info on EISA bus support.
 email-clients.txt
@@ -195,8 +203,8 @@ futex-requeue-pi.txt
 	- info on requeueing of tasks from a non-PI futex to a PI futex
 gcov.txt
 	- use of GCC's coverage testing tool "gcov" with the Linux kernel
-gpio.txt
-	- overview of GPIO (General Purpose Input/Output) access conventions.
+gpio/
+	- gpio related documentation
 hid/
 	- directory with information on human interface devices
 highuid.txt
@@ -255,6 +263,8 @@ kernel-docs.txt
 	- listing of various WWW + books that document kernel internals.
 kernel-parameters.txt
 	- summary listing of command line / boot prompt args for the kernel.
+kernel-per-CPU-kthreads.txt
+	- List of all per-CPU kthreads and how they introduce jitter.
 kmemcheck.txt
 	- info on dynamic checker that detects uses of uninitialized memory.
 kmemleak.txt
@@ -299,8 +309,6 @@ memory-devices/
 	- directory with info on parts like the Texas Instruments EMIF driver
 memory-hotplug.txt
 	- Hotpluggable memory support, how to use and current status.
-memory.txt
-	- info on typical Linux memory problems.
 metag/
 	- directory with info about Linux on Meta architecture.
 mips/
@@ -311,6 +319,8 @@ mmc/
 	- directory with info about the MMC subsystem
 mn10300/
 	- directory with info about the mn10300 architecture port
+module-signing.txt
+	- Kernel module signing for increased security when loading modules.
 mtd/
 	- directory with info about memory technology devices (flash)
 mono.txt
@@ -343,6 +353,8 @@ pcmcia/
 	- info on the Linux PCMCIA driver.
 percpu-rw-semaphore.txt
 	- RCU based read-write semaphore optimized for locking for reading
+phy.txt
+	- Description of the generic PHY framework.
 pi-futex.txt
 	- documentation on lightweight priority inheritance futexes.
 pinctrl.txt
@@ -431,6 +443,8 @@ sysrq.txt
 	- info on the magic SysRq key.
 target/
 	- directory with info on generating TCM v4 fabric .ko modules
+this_cpu_ops.txt
+	- List rationale behind and the way to use this_cpu operations.
 thermal/
 	- directory with information on managing thermal issues (CPU/temp)
 trace/
@@ -469,6 +483,8 @@ wimax/
 	- directory with info about Intel Wireless Wimax Connections
 workqueue.txt
 	- information on the Concurrency Managed Workqueue implementation
+ww-mutex-design.txt
+	- Intro to Mutex wait/would deadlock handling.s
 x86/x86_64/
 	- directory with info on Linux support for AMD x86-64 (Hammer) machines.
 xtensa/

Documentation/RCU/00-INDEX

@@ -8,6 +8,8 @@ listRCU.txt
 	- Using RCU to Protect Read-Mostly Linked Lists
 lockdep.txt
 	- RCU and lockdep checking
+lockdep-splat.txt
+	- RCU Lockdep splats explained.
 NMI-RCU.txt
 	- Using RCU to Protect Dynamic NMI Handlers
 rcubarrier.txt

Documentation/arm/00-INDEX

@@ -4,6 +4,8 @@ Booting
 	- requirements for booting
 Interrupts
 	- ARM Interrupt subsystem documentation
+IXP4xx
+	- Intel IXP4xx Network processor.
 msm
 	- MSM specific documentation
 Netwinder
@@ -24,8 +26,16 @@ SPEAr
 	- ST SPEAr platform Linux Overview
 VFP/
 	- Release notes for Linux Kernel Vector Floating Point support code
+cluster-pm-race-avoidance.txt
+	- Algorithm for CPU and Cluster setup/teardown
 empeg/
 	- Ltd's Empeg MP3 Car Audio Player
+firmware.txt
+	- Secure firmware registration and calling.
+kernel_mode_neon.txt
+	- How to use NEON instructions in kernel mode
+kernel_user_helpers.txt
+	- Helper functions in kernel space made available for userspace.
 mem_alignment
 	- alignment abort handler documentation
 memory.txt
@@ -34,3 +44,7 @@ nwfpe/
 	- NWFPE floating point emulator documentation
 swp_emulation
 	- SWP/SWPB emulation handler/logging description
+tcm.txt
+	- ARM Tightly Coupled Memory
+vlocks.txt
+	- Voting locks, low-level mechanism relying on memory system atomic writes.

Documentation/blackfin/00-INDEX

 00-INDEX
 	- This file
-
+Makefile
+	- Makefile for gptimers example file.
 bfin-gpio-notes.txt
 	- Notes in developing/using bfin-gpio driver.
-
 bfin-spi-notes.txt
 	- Notes for using bfin spi bus driver.
+gptimers-example.c
+	- gptimers example

Documentation/block/00-INDEX

@@ -14,6 +14,8 @@ deadline-iosched.txt
 	- Deadline IO scheduler tunables
 ioprio.txt
 	- Block io priorities (in CFQ scheduler)
+null_blk.txt
+	- Null block for block-layer benchmarking.
 queue-sysfs.txt
 	- Queue's sysfs entries
 request.txt

Documentation/devicetree/00-INDEX

@@ -8,3 +8,5 @@ https://lists.ozlabs.org/listinfo/devicetree-discuss
 	- this file
 booting-without-of.txt
 	- Booting Linux without Open Firmware, describes history and format of device trees.
+usage-model.txt
+	- How Linux uses DT and what DT aims to solve.
\ No newline at end of file

Documentation/fb/00-INDEX

@@ -5,6 +5,8 @@ please mail me.
 
 00-INDEX
 	- this file.
+api.txt
+	- The frame buffer API between applications and buffer devices.
 arkfb.txt
 	- info on the fbdev driver for ARK Logic chips.
 aty128fb.txt
@@ -51,12 +53,16 @@ sh7760fb.txt
 	- info on the SH7760/SH7763 integrated LCDC Framebuffer driver.
 sisfb.txt
 	- info on the framebuffer device driver for various SiS chips.
+sm501.txt
+	- info on the framebuffer device driver for sm501 videoframebuffer.
 sstfb.txt
 	- info on the frame buffer driver for 3dfx' Voodoo Graphics boards.
 tgafb.txt
 	- info on the TGA (DECChip 21030) frame buffer driver.
 tridentfb.txt
 	info on the framebuffer driver for some Trident chip based cards.
+udlfb.txt
+	- Driver for DisplayLink USB 2.0 chips.
 uvesafb.txt
 	- info on the userspace VESA (VBE2+ compliant) frame buffer device.
 vesafb.txt

Documentation/filesystems/00-INDEX

@@ -2,6 +2,8 @@
 	- this file (info on some of the filesystems supported by linux).
 Locking
 	- info on locking rules as they pertain to Linux VFS.
+Makefile
+	- Makefile for building the filsystems-part of DocBook.
 9p.txt
 	- 9p (v9fs) is an implementation of the Plan 9 remote fs protocol.
 adfs.txt

Documentation/filesystems/nfs/00-INDEX

@@ -12,6 +12,8 @@ nfs41-server.txt
 	- info on the Linux server implementation of NFSv4 minor version 1.
 nfs-rdma.txt
 	- how to install and setup the Linux NFS/RDMA client and server software
+nfsd-admin-interfaces.txt
+	- Administrative interfaces for nfsd.
 nfsroot.txt
 	- short guide on setting up a diskless box with NFS root filesystem.
 pnfs.txt
@@ -20,5 +22,5 @@ rpc-cache.txt
 	- introduction to the caching mechanisms in the sunrpc layer.
 idmapper.txt
 	- information for configuring request-keys to be used by idmapper
-knfsd-rpcgss.txt
+rpc-server-gss.txt
 	- Information on GSS authentication support in the NFS Server

Documentation/ide/00-INDEX

@@ -10,3 +10,5 @@ ide-tape.txt
 	- info on the IDE ATAPI streaming tape driver
 ide.txt
 	- important info for users of ATA devices (IDE/EIDE disks and CD-ROMS).
+warm-plug-howto.txt
+	- using sysfs to remove and add IDE devices.
\ No newline at end of file

Documentation/laptops/00-INDEX

 00-INDEX
 	- This file
-acer-wmi.txt
-	- information on the Acer Laptop WMI Extras driver.
+Makefile
+	- Makefile for building dslm example program.
 asus-laptop.txt
 	- information on the Asus Laptop Extras driver.
 disk-shock-protection.txt
 	- information on hard disk shock protection.
 dslm.c
 	- Simple Disk Sleep Monitor program
+hpfall.c
+	- (HP) laptop accelerometer program for disk protection.
 laptop-mode.txt
 	- how to conserve battery power using laptop-mode.
 sony-laptop.txt

Documentation/leds/00-INDEX

+00-INDEX
+	- This file
+leds-blinkm.txt
+	- Driver for BlinkM LED-devices.
 leds-class.txt
 	- documents LED handling under Linux.
 leds-lp3944.txt
@@ -12,3 +16,7 @@ leds-lp55xx.txt
 	- description about lp55xx common driver.
 leds-lm3556.txt
 	- notes on how to use the leds-lm3556 driver.
+ledtrig-oneshot.txt
+	- One-shot LED trigger for both sporadic and dense events.
+ledtrig-transient.txt
+	- LED Transient Trigger, one shot timer activation.

Documentation/m68k/00-INDEX

 00-INDEX
 	- this file
+README.buddha
+	- Amiga Buddha and Catweasel IDE Driver
 kernel-options.txt
 	- command line options for Linux/m68k
 

Documentation/networking/00-INDEX

@@ -6,8 +6,14 @@
 	- information on the 3Com Etherlink III Series Ethernet cards.
 6pack.txt
 	- info on the 6pack protocol, an alternative to KISS for AX.25
-DLINK.txt
-	- info on the D-Link DE-600/DE-620 parallel port pocket adapters
+LICENSE.qla3xxx
+	- GPLv2 for QLogic Linux Networking HBA Driver
+LICENSE.qlge
+	- GPLv2 for QLogic Linux qlge NIC Driver
+LICENSE.qlcnic
+	- GPLv2 for QLogic Linux qlcnic NIC Driver
+Makefile
+	- Makefile for docsrc.
 PLIP.txt
 	- PLIP: The Parallel Line Internet Protocol device driver
 README.ipw2100
@@ -17,7 +23,7 @@ README.ipw2200
 README.sb1000
 	- info on General Instrument/NextLevel SURFboard1000 cable modem.
 alias.txt
-	- info on using alias network devices 
+	- info on using alias network devices.
 arcnet-hardware.txt
 	- tons of info on ARCnet, hubs, jumper settings for ARCnet cards, etc.
 arcnet.txt
@@ -80,7 +86,7 @@ framerelay.txt
 	- info on using Frame Relay/Data Link Connection Identifier (DLCI).
 gen_stats.txt
 	- Generic networking statistics for netlink users.
-generic_hdlc.txt
+generic-hdlc.txt
 	- The generic High Level Data Link Control (HDLC) layer.
 generic_netlink.txt
 	- info on Generic Netlink
@@ -88,6 +94,8 @@ gianfar.txt
 	- Gianfar Ethernet Driver.
 i40e.txt
 	- README for the Intel Ethernet Controller XL710 Driver (i40e).
+i40evf.txt
+	- Short note on the Driver for the Intel(R) XL710 X710 Virtual Function
 ieee802154.txt
 	- Linux IEEE 802.15.4 implementation, API and drivers
 igb.txt
@@ -102,6 +110,8 @@ ipddp.txt
 	- AppleTalk-IP Decapsulation and AppleTalk-IP Encapsulation
 iphase.txt
 	- Interphase PCI ATM (i)Chip IA Linux driver info.
+ipsec.txt
+	- Note on not compressing IPSec payload and resulting failed policy check.
 ipv6.txt
 	- Options to the ipv6 kernel module.
 ipvs-sysctl.txt
@@ -120,6 +130,8 @@ lapb-module.txt
 	- programming information of the LAPB module.
 ltpc.txt
 	- the Apple or Farallon LocalTalk PC card driver
+mac80211-auth-assoc-deauth.txt
+	- authentication and association / deauth-disassoc with max80211
 mac80211-injection.txt
 	- HOWTO use packet injection with mac80211
 multiqueue.txt
@@ -134,6 +146,10 @@ netdevices.txt
 	- info on network device driver functions exported to the kernel.
 netif-msg.txt
 	- Design of the network interface message level setting (NETIF_MSG_*).
+netlink_mmap.txt
+	- memory mapped I/O with netlink
+nf_conntrack-sysctl.txt
+	- list of netfilter-sysctl knobs.
 nfc.txt
 	- The Linux Near Field Communication (NFS) subsystem.
 openvswitch.txt
@@ -176,7 +192,7 @@ skfp.txt
 	- SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info.
 smc9.txt
 	- the driver for SMC's 9000 series of Ethernet cards
-spider-net.txt
+spider_net.txt
 	- README for the Spidernet Driver (as found in PS3 / Cell BE).
 stmmac.txt
 	- README for the STMicro Synopsys Ethernet driver.
@@ -188,6 +204,8 @@ tcp.txt
 	- short blurb on how TCP output takes place.
 tcp-thin.txt
 	- kernel tuning options for low rate 'thin' TCP streams.
+team.txt
+	- pointer to information for ethernet teaming devices.
 tlan.txt
 	- ThunderLAN (Compaq Netelligent 10/100, Olicom OC-2xxx) driver info.
 tproxy.txt
@@ -200,6 +218,8 @@ vortex.txt
 	- info on using 3Com Vortex (3c590, 3c592, 3c595, 3c597) Ethernet cards.
 vxge.txt
 	- README for the Neterion X3100 PCIe Server Adapter.
+vxlan.txt
+	- Virtual extensible LAN overview
 x25.txt
 	- general info on X.25 development.
 x25-iface.txt

Documentation/power/00-INDEX

@@ -4,6 +4,8 @@ apm-acpi.txt
 	- basic info about the APM and ACPI support.
 basic-pm-debugging.txt
 	- Debugging suspend and resume
+charger-manager.txt
+	- Battery charger management.
 devices.txt
 	- How drivers interact with system-wide power management
 drivers-testing.txt
@@ -22,6 +24,8 @@ pm_qos_interface.txt
 	- info on Linux PM Quality of Service interface
 power_supply_class.txt
 	- Tells userspace about battery, UPS, AC or DC power supply properties
+runtime_pm.txt
+	- Power management framework for I/O devices.
 s2ram.txt
 	- How to get suspend to ram working (and debug it when it isn't)
 states.txt
@@ -38,7 +42,5 @@ tricks.txt
 	- How to trick software suspend (to disk) into working when it isn't
 userland-swsusp.txt
 	- Experimental implementation of software suspend in userspace
-video_extension.txt
-	- ACPI video extensions
 video.txt
 	- Video issues during resume from suspend

Documentation/s390/00-INDEX

@@ -16,11 +16,13 @@ Debugging390.txt
 	- hints for debugging on s390 systems.
 driver-model.txt
 	- information on s390 devices and the driver model.
+kvm.txt
+	- ioctl calls to /dev/kvm on s390.
 monreader.txt
 	- information on accessing the z/VM monitor stream from Linux.
+qeth.txt
+	- HiperSockets Bridge Port Support.
 s390dbf.txt
 	- information on using the s390 debug feature.
-TAPE
-	- information on the driver for channel-attached tapes.
-zfcpdump
+zfcpdump.txt
 	- information on the s390 SCSI dump tool.

Documentation/scheduler/00-INDEX

@@ -2,6 +2,8 @@
 	- this file.
 sched-arch.txt
 	- CPU Scheduler implementation hints for architecture specific code.
+sched-bwc.txt
+	- CFS bandwidth control overview.
 sched-design-CFS.txt
 	- goals, design and implementation of the Completely Fair Scheduler.
 sched-domains.txt

Documentation/scsi/00-INDEX

@@ -36,6 +36,8 @@ NinjaSCSI.txt
 	- info on WorkBiT NinjaSCSI-32/32Bi driver
 aacraid.txt
 	- Driver supporting Adaptec RAID controllers
+advansys.txt
+	- List of Advansys Host Adapters
 aha152x.txt
 	- info on driver for Adaptec AHA152x based adapters
 aic79xx.txt
@@ -44,6 +46,12 @@ aic7xxx.txt
 	- info on driver for Adaptec controllers
 arcmsr_spec.txt
 	- ARECA FIRMWARE SPEC (for IOP331 adapter)
+bfa.txt
+	- Brocade FC/FCOE adapter driver.
+bnx2fc.txt
+	- FCoE hardware offload for Broadcom network interfaces.
+cxgb3i.txt
+	- Chelsio iSCSI Linux Driver
 dc395x.txt
 	- README file for the dc395x SCSI driver
 dpti.txt
@@ -52,18 +60,24 @@ dtc3x80.txt
 	- info on driver for DTC 2x80 based adapters
 g_NCR5380.txt
 	- info on driver for NCR5380 and NCR53c400 based adapters
+hpsa.txt
+	- HP Smart Array Controller SCSI driver.
 hptiop.txt
 	- HIGHPOINT ROCKETRAID 3xxx RAID DRIVER
 in2000.txt
 	- info on in2000 driver
 libsas.txt
 	- Serial Attached SCSI management layer.
+link_power_management_policy.txt
+	- Link power management options.
 lpfc.txt
 	- LPFC driver release notes
 megaraid.txt
 	- Common Management Module, shared code handling ioctls for LSI drivers
 ncr53c8xx.txt
 	- info on driver for NCR53c8xx based adapters
+osd.txt
+	Object-Based Storage Device, command set introduction.
 osst.txt
 	- info on driver for OnStream SC-x0 SCSI tape
 ppa.txt
@@ -74,6 +88,8 @@ scsi-changer.txt
 	- README for the SCSI media changer driver
 scsi-generic.txt
 	- info on the sg driver for generic (non-disk/CD/tape) SCSI devices.
+scsi-parameters.txt
+	- List of SCSI-parameters to pass to the kernel at module load-time.
 scsi.txt
 	- short blurb on using SCSI support as a module.
 scsi_mid_low_api.txt

Documentation/serial/00-INDEX

@@ -4,10 +4,12 @@ README.cycladesZ
 	- info on Cyclades-Z firmware loading.
 digiepca.txt
 	- info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards.
-hayes-esp.txt
-	- info on using the Hayes ESP serial driver.
+driver
+	- intro to the low level serial driver.
 moxa-smartio
 	- file with info on installing/using Moxa multiport serial driver.
+n_gsm.txt
+	- GSM 0710 tty multiplexer howto.
 riscom8.txt
 	- notes on using the RISCom/8 multi-port serial driver.
 rocket.txt

Documentation/spi/00-INDEX

+00-INDEX
+	- this file.
+Makefile
+	- Makefile for the example sourcefiles.
+butterfly
+	- AVR Butterfly SPI driver overview and pin configuration.
+ep93xx_spi
+	- Basic EP93xx SPI driver configuration.
+pxa2xx
+	- PXA2xx SPI master controller build by spi_message fifo wq
+spidev
+	- Intro to the userspace API for spi devices
+spidev_fdx.c
+	- spidev example file
+spi-lm70llp
+	- Connecting an LM70-LLP sensor to the kernel via the SPI subsys.
+spi-sc18is602
+	- NXP SC18IS602/603 I2C-bus to SPI bridge
+spi-summary
+	- (Linux) SPI overview. If unsure about SPI or SPI in Linux, start here.
+spidev_test.c
+	- SPI testing utility.

Documentation/timers/00-INDEX

@@ -8,6 +8,8 @@ hpet_example.c
 	- sample hpet timer test program
 hrtimers.txt
 	- subsystem for high-resolution kernel timers
+Makefile
+	- Build and link hpet_example
 NO_HZ.txt
 	- Summary of the different methods for the scheduler clock-interrupts management.
 timers-howto.txt

Documentation/virtual/kvm/00-INDEX

@@ -20,5 +20,7 @@ ppc-pv.txt
 	- the paravirtualization interface on PowerPC.
 review-checklist.txt
 	- review checklist for KVM patches.
+s390-diag.txt
+	- Diagnose hypercall description (for IBM S/390)
 timekeeping.txt
 	- timekeeping virtualization for x86-based architectures.

Documentation/vm/00-INDEX

@@ -16,8 +16,6 @@ hwpoison.txt
 	- explains what hwpoison is
 ksm.txt
 	- how to use the Kernel Samepage Merging feature.
-locking
-	- info on how locking and synchronization is done in the Linux vm code.
 numa
 	- information about NUMA specific code in the Linux vm.
 numa_memory_policy.txt
@@ -32,6 +30,8 @@ slub.txt
 	- a short users guide for SLUB.
 soft-dirty.txt
 	- short explanation for soft-dirty PTEs
+split_page_table_lock
+	- Separate per-table lock to improve scalability of the old page_table_lock.
 transhuge.txt
 	- Transparent Hugepage Support, alternative way of using hugepages.
 unevictable-lru.txt

Documentation/w1/masters/00-INDEX

@@ -4,7 +4,9 @@ ds2482
 	- The Maxim/Dallas Semiconductor DS2482 provides 1-wire busses.
 ds2490
 	- The Maxim/Dallas Semiconductor DS2490 builds USB <-> W1 bridges.
-mxc_w1
+mxc-w1
 	- W1 master controller driver found on Freescale MX2/MX3 SoCs
+omap-hdq
+	- HDQ/1-wire module of TI OMAP 2430/3430.
 w1-gpio
 	- GPIO 1-wire bus master driver.

Documentation/w1/slaves/00-INDEX

@@ -4,3 +4,5 @@ w1_therm
 	- The Maxim/Dallas Semiconductor ds18*20 temperature sensor.
 w1_ds2423
 	- The Maxim/Dallas Semiconductor ds2423 counter device.
+w1_ds28e04
+	- The Maxim/Dallas Semiconductor ds28e04 eeprom.

Documentation/x86/00-INDEX

 00-INDEX
 	- this file
-mtrr.txt
-	- how to use x86 Memory Type Range Registers to increase performance
+boot.txt
+	- List of boot protocol versions
+early-microcode.txt
+	- How to load microcode from an initrd-CPIO archive early to fix CPU issues.
+earlyprintk.txt
+	- Using earlyprintk with a USB2 debug port key.
+entry_64.txt
+	- Describe (some of the) kernel entry points for x86.
 exception-tables.txt
 	- why and how Linux kernel uses exception tables on x86
+mtrr.txt
+	- how to use x86 Memory Type Range Registers to increase performance
+pat.txt
+	- Page Attribute Table intro and API
+usb-legacy-support.txt
+	- how to fix/avoid quirks when using emulated PS/2 mouse/keyboard.
+zero-page.txt
+	- layout of the first page of memory.

arch/x86/include/asm/pgtable.h

@@ -445,10 +445,20 @@ static inline int pte_same(pte_t a, pte_t b)
 	return a.pte == b.pte;
 }
 
+static inline int pteval_present(pteval_t pteval)
+{
+	/*
+	 * Yes Linus, _PAGE_PROTNONE == _PAGE_NUMA. Expressing it this
+	 * way clearly states that the intent is that protnone and numa
+	 * hinting ptes are considered present for the purposes of
+	 * pagetable operations like zapping, protection changes, gup etc.
+	 */
+	return pteval & (_PAGE_PRESENT | _PAGE_PROTNONE | _PAGE_NUMA);
+}
+
 static inline int pte_present(pte_t a)
 {
-	return pte_flags(a) & (_PAGE_PRESENT | _PAGE_PROTNONE |
-			       _PAGE_NUMA);
+	return pteval_present(pte_flags(a));
 }
 
 #define pte_accessible pte_accessible

arch/x86/xen/mmu.c

@@ -365,7 +365,7 @@ void xen_ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr,
 /* Assume pteval_t is equivalent to all the other *val_t types. */
 static pteval_t pte_mfn_to_pfn(pteval_t val)
 {
-	if (val & _PAGE_PRESENT) {
+	if (pteval_present(val)) {
 		unsigned long mfn = (val & PTE_PFN_MASK) >> PAGE_SHIFT;
 		unsigned long pfn = mfn_to_pfn(mfn);
 
@@ -381,7 +381,7 @@ static pteval_t pte_mfn_to_pfn(pteval_t val)
 
 static pteval_t pte_pfn_to_mfn(pteval_t val)
 {
-	if (val & _PAGE_PRESENT) {
+	if (pteval_present(val)) {
 		unsigned long pfn = (val & PTE_PFN_MASK) >> PAGE_SHIFT;
 		pteval_t flags = val & PTE_FLAGS_MASK;
 		unsigned long mfn;

drivers/edac/edac_mc_sysfs.c

@@ -61,7 +61,7 @@ static int edac_set_poll_msec(const char *val, struct kernel_param *kp)
 	ret = kstrtol(val, 0, &l);
 	if (ret)
 		return ret;
-	if ((int)l != l)
+	if (!l || ((int)l != l))
 		return -EINVAL;
 	*((int *)kp->arg) = l;
 

drivers/md/bcache/extents.c

@@ -194,7 +194,7 @@ static bool btree_ptr_bad_expensive(struct btree *b, const struct bkey *k)
 	mutex_unlock(&b->c->bucket_lock);
 	bch_extent_to_text(buf, sizeof(buf), k);
 	btree_bug(b,
-"inconsistent btree pointer %s: bucket %li pin %i prio %i gen %i last_gc %i mark %llu gc_gen %i",
+"inconsistent btree pointer %s: bucket %zi pin %i prio %i gen %i last_gc %i mark %llu gc_gen %i",
 		  buf, PTR_BUCKET_NR(b->c, k, i), atomic_read(&g->pin),
 		  g->prio, g->gen, g->last_gc, GC_MARK(g), g->gc_gen);
 	return true;

drivers/message/i2o/i2o_config.c

@@ -754,19 +754,19 @@ static long i2o_cfg_compat_ioctl(struct file *file, unsigned cmd,
 				 unsigned long arg)
 {
 	int ret;
-	mutex_lock(&i2o_cfg_mutex);
 	switch (cmd) {
 	case I2OGETIOPS:
 		ret = i2o_cfg_ioctl(file, cmd, arg);
 		break;
 	case I2OPASSTHRU32:
+		mutex_lock(&i2o_cfg_mutex);
 		ret = i2o_cfg_passthru32(file, cmd, arg);
+		mutex_unlock(&i2o_cfg_mutex);
 		break;
 	default:
 		ret = -ENOIOCTLCMD;
 		break;
 	}
-	mutex_unlock(&i2o_cfg_mutex);
 	return ret;
 }
 

drivers/misc/sgi-gru/grukdump.c

@@ -139,8 +139,11 @@ static int gru_dump_context(struct gru_state *gru, int ctxnum,
 
 	ubuf += sizeof(hdr);
 	ubufcch = ubuf;
-	if (gru_user_copy_handle(&ubuf, cch))
-		goto fail;
+	if (gru_user_copy_handle(&ubuf, cch)) {
+		if (cch_locked)
+			unlock_cch_handle(cch);
+		return -EFAULT;
+	}
 	if (cch_locked)
 		ubufcch->delresp = 0;
 	bytes = sizeof(hdr) + GRU_CACHE_LINE_BYTES;
@@ -179,10 +182,6 @@ static int gru_dump_context(struct gru_state *gru, int ctxnum,
 		ret = -EFAULT;
 
 	return ret ? ret : bytes;
-
-fail:
-	unlock_cch_handle(cch);
-	return -EFAULT;
 }
 
 int gru_dump_chiplet_request(unsigned long arg)

fs/file.c

@@ -34,7 +34,7 @@ static void *alloc_fdmem(size_t size)
 	 * vmalloc() if the allocation size will be considered "large" by the VM.
 	 */
 	if (size <= (PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER)) {
-		void *data = kmalloc(size, GFP_KERNEL|__GFP_NOWARN);
+		void *data = kmalloc(size, GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY);
 		if (data != NULL)
 			return data;
 	}

fs/nfs/dir.c

@@ -1846,6 +1846,11 @@ int nfs_symlink(struct inode *dir, struct dentry *dentry, const char *symname)
 							GFP_KERNEL)) {
 		SetPageUptodate(page);
 		unlock_page(page);
+		/*
+		 * add_to_page_cache_lru() grabs an extra page refcount.
+		 * Drop it here to avoid leaking this page later.
+		 */
+		page_cache_release(page);
 	} else
 		__free_page(page);
 

fs/ocfs2/alloc.c

@@ -7158,7 +7158,7 @@ int ocfs2_truncate_inline(struct inode *inode, struct buffer_head *di_bh,
 	if (end > i_size_read(inode))
 		end = i_size_read(inode);
 
-	BUG_ON(start >= end);
+	BUG_ON(start > end);
 
 	if (!(OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) ||
 	    !(le16_to_cpu(di->i_dyn_features) & OCFS2_INLINE_DATA_FL) ||

fs/ocfs2/file.c

@@ -185,6 +185,9 @@ static int ocfs2_sync_file(struct file *file, loff_t start, loff_t end,
 			      file->f_path.dentry->d_name.name,
 			      (unsigned long long)datasync);
 
+	if (ocfs2_is_hard_readonly(osb) || ocfs2_is_soft_readonly(osb))
+		return -EROFS;
+
 	err = filemap_write_and_wait_range(inode->i_mapping, start, end);
 	if (err)
 		return err;
@@ -474,11 +477,6 @@ static int ocfs2_truncate_file(struct inode *inode,
 		goto bail;
 	}
 
-	/* lets handle the simple truncate cases before doing any more
-	 * cluster locking. */
-	if (new_i_size == le64_to_cpu(fe->i_size))
-		goto bail;
-
 	down_write(&OCFS2_I(inode)->ip_alloc_sem);
 
 	ocfs2_resv_discard(&osb->osb_la_resmap,
@@ -718,7 +716,8 @@ static int __ocfs2_extend_allocation(struct inode *inode, u32 logical_start,
  * While a write will already be ordering the data, a truncate will not.
  * Thus, we need to explicitly order the zeroed pages.
  */
-static handle_t *ocfs2_zero_start_ordered_transaction(struct inode *inode)
+static handle_t *ocfs2_zero_start_ordered_transaction(struct inode *inode,
+						struct buffer_head *di_bh)
 {
 	struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
 	handle_t *handle = NULL;
@@ -735,7 +734,14 @@ static handle_t *ocfs2_zero_start_ordered_transaction(struct inode *inode)
 	}
 
 	ret = ocfs2_jbd2_file_inode(handle, inode);
-	if (ret < 0)
+	if (ret < 0) {
+		mlog_errno(ret);
+		goto out;
+	}
+
+	ret = ocfs2_journal_access_di(handle, INODE_CACHE(inode), di_bh,
+				      OCFS2_JOURNAL_ACCESS_WRITE);
+	if (ret)
 		mlog_errno(ret);
 
 out:
@@ -751,7 +757,7 @@ static handle_t *ocfs2_zero_start_ordered_transaction(struct inode *inode)
  * to be too fragile to do exactly what we need without us having to
  * worry about recursive locking in ->write_begin() and ->write_end(). */
 static int ocfs2_write_zero_page(struct inode *inode, u64 abs_from,
-				 u64 abs_to)
+				 u64 abs_to, struct buffer_head *di_bh)
 {
 	struct address_space *mapping = inode->i_mapping;
 	struct page *page;
@@ -759,6 +765,7 @@ static int ocfs2_write_zero_page(struct inode *inode, u64 abs_from,
 	handle_t *handle = NULL;
 	int ret = 0;
 	unsigned zero_from, zero_to, block_start, block_end;
+	struct ocfs2_dinode *di = (struct ocfs2_dinode *)di_bh->b_data;
 
 	BUG_ON(abs_from >= abs_to);
 	BUG_ON(abs_to > (((u64)index + 1) << PAGE_CACHE_SHIFT));
@@ -801,7 +808,8 @@ static int ocfs2_write_zero_page(struct inode *inode, u64 abs_from,
 		}
 
 		if (!handle) {
-			handle = ocfs2_zero_start_ordered_transaction(inode);
+			handle = ocfs2_zero_start_ordered_transaction(inode,
+								      di_bh);
 			if (IS_ERR(handle)) {
 				ret = PTR_ERR(handle);
 				handle = NULL;
@@ -818,8 +826,22 @@ static int ocfs2_write_zero_page(struct inode *inode, u64 abs_from,
 			ret = 0;
 	}
 
-	if (handle)
+	if (handle) {
+		/*
+		 * fs-writeback will release the dirty pages without page lock
+		 * whose offset are over inode size, the release happens at
+		 * block_write_full_page_endio().
+		 */
+		i_size_write(inode, abs_to);
+		inode->i_blocks = ocfs2_inode_sector_count(inode);
+		di->i_size = cpu_to_le64((u64)i_size_read(inode));
+		inode->i_mtime = inode->i_ctime = CURRENT_TIME;
+		di->i_mtime = di->i_ctime = cpu_to_le64(inode->i_mtime.tv_sec);
+		di->i_ctime_nsec = cpu_to_le32(inode->i_mtime.tv_nsec);
+		di->i_mtime_nsec = di->i_ctime_nsec;
+		ocfs2_journal_dirty(handle, di_bh);
 		ocfs2_commit_trans(OCFS2_SB(inode->i_sb), handle);
+	}
 
 out_unlock:
 	unlock_page(page);
@@ -915,7 +937,7 @@ static int ocfs2_zero_extend_get_range(struct inode *inode,
  * has made sure that the entire range needs zeroing.
  */
 static int ocfs2_zero_extend_range(struct inode *inode, u64 range_start,
-				   u64 range_end)
+				   u64 range_end, struct buffer_head *di_bh)
 {
 	int rc = 0;
 	u64 next_pos;
@@ -931,7 +953,7 @@ static int ocfs2_zero_extend_range(struct inode *inode, u64 range_start,
 		next_pos = (zero_pos & PAGE_CACHE_MASK) + PAGE_CACHE_SIZE;
 		if (next_pos > range_end)
 			next_pos = range_end;
-		rc = ocfs2_write_zero_page(inode, zero_pos, next_pos);
+		rc = ocfs2_write_zero_page(inode, zero_pos, next_pos, di_bh);
 		if (rc < 0) {
 			mlog_errno(rc);
 			break;
@@ -977,7 +999,7 @@ int ocfs2_zero_extend(struct inode *inode, struct buffer_head *di_bh,
 			range_end = zero_to_size;
 
 		ret = ocfs2_zero_extend_range(inode, range_start,
-					      range_end);
+					      range_end, di_bh);
 		if (ret) {
 			mlog_errno(ret);
 			break;
@@ -1145,14 +1167,14 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
 		goto bail_unlock_rw;
 	}
 
-	if (size_change && attr->ia_size != i_size_read(inode)) {
+	if (size_change) {
 		status = inode_newsize_ok(inode, attr->ia_size);
 		if (status)
 			goto bail_unlock;
 
 		inode_dio_wait(inode);
 
-		if (i_size_read(inode) > attr->ia_size) {
+		if (i_size_read(inode) >= attr->ia_size) {
 			if (ocfs2_should_order_data(inode)) {
 				status = ocfs2_begin_ordered_truncate(inode,
 								      attr->ia_size);

fs/ocfs2/namei.c

@@ -664,6 +664,7 @@ static int ocfs2_link(struct dentry *old_dentry,
 	struct ocfs2_super *osb = OCFS2_SB(dir->i_sb);
 	struct ocfs2_dir_lookup_result lookup = { NULL, };
 	sigset_t oldset;
+	u64 old_de_ino;
 
 	trace_ocfs2_link((unsigned long long)OCFS2_I(inode)->ip_blkno,
 			 old_dentry->d_name.len, old_dentry->d_name.name,
@@ -686,6 +687,22 @@ static int ocfs2_link(struct dentry *old_dentry,
 		goto out;
 	}
 
+	err = ocfs2_lookup_ino_from_name(dir, old_dentry->d_name.name,
+			old_dentry->d_name.len, &old_de_ino);
+	if (err) {
+		err = -ENOENT;
+		goto out;
+	}
+
+	/*
+	 * Check whether another node removed the source inode while we
+	 * were in the vfs.
+	 */
+	if (old_de_ino != OCFS2_I(inode)->ip_blkno) {
+		err = -ENOENT;
+		goto out;
+	}
+
 	err = ocfs2_check_dir_for_entry(dir, dentry->d_name.name,
 					dentry->d_name.len);
 	if (err)

fs/proc/vmcore.c

@@ -468,17 +468,24 @@ static int __init update_note_header_size_elf64(const Elf64_Ehdr *ehdr_ptr)
 			return rc;
 		}
 		nhdr_ptr = notes_section;
-		while (real_sz < max_sz) {
-			if (nhdr_ptr->n_namesz == 0)
-				break;
+		while (nhdr_ptr->n_namesz != 0) {
 			sz = sizeof(Elf64_Nhdr) +
 				((nhdr_ptr->n_namesz + 3) & ~3) +
 				((nhdr_ptr->n_descsz + 3) & ~3);
+			if ((real_sz + sz) > max_sz) {
+				pr_warn("Warning: Exceeded p_memsz, dropping PT_NOTE entry n_namesz=0x%x, n_descsz=0x%x\n",
+					nhdr_ptr->n_namesz, nhdr_ptr->n_descsz);
+				break;
+			}
 			real_sz += sz;
 			nhdr_ptr = (Elf64_Nhdr*)((char*)nhdr_ptr + sz);
 		}
 		kfree(notes_section);
 		phdr_ptr->p_memsz = real_sz;
+		if (real_sz == 0) {
+			pr_warn("Warning: Zero PT_NOTE entries found\n");
+			return -EINVAL;
+		}
 	}
 
 	return 0;
@@ -648,17 +655,24 @@ static int __init update_note_header_size_elf32(const Elf32_Ehdr *ehdr_ptr)
 			return rc;
 		}
 		nhdr_ptr = notes_section;
-		while (real_sz < max_sz) {
-			if (nhdr_ptr->n_namesz == 0)
-				break;
+		while (nhdr_ptr->n_namesz != 0) {
 			sz = sizeof(Elf32_Nhdr) +
 				((nhdr_ptr->n_namesz + 3) & ~3) +
 				((nhdr_ptr->n_descsz + 3) & ~3);
+			if ((real_sz + sz) > max_sz) {
+				pr_warn("Warning: Exceeded p_memsz, dropping PT_NOTE entry n_namesz=0x%x, n_descsz=0x%x\n",
+					nhdr_ptr->n_namesz, nhdr_ptr->n_descsz);
+				break;
+			}
 			real_sz += sz;
 			nhdr_ptr = (Elf32_Nhdr*)((char*)nhdr_ptr + sz);
 		}
 		kfree(notes_section);
 		phdr_ptr->p_memsz = real_sz;
+		if (real_sz == 0) {
+			pr_warn("Warning: Zero PT_NOTE entries found\n");
+			return -EINVAL;
+		}
 	}
 
 	return 0;

include/linux/smp.h

@@ -188,6 +188,9 @@ static inline void kick_all_cpus_sync(void) {  }
  */
 extern void arch_disable_smp_support(void);
 
+extern void arch_enable_nonboot_cpus_begin(void);
+extern void arch_enable_nonboot_cpus_end(void);
+
 void smp_setup_processor_id(void);
 
 #endif /* __LINUX_SMP_H */

mm/memory-failure.c

@@ -945,8 +945,10 @@ static int hwpoison_user_mappings(struct page *p, unsigned long pfn,
 			 * to it. Similarly, page lock is shifted.
 			 */
 			if (hpage != p) {
+				if (!(flags & MF_COUNT_INCREASED)) {
 					put_page(hpage);
 					get_page(p);
+				}
 				lock_page(p);
 				unlock_page(hpage);
 				*hpagep = p;

mm/slub.c

@@ -1004,21 +1004,19 @@ static inline void slab_free_hook(struct kmem_cache *s, void *x)
 static void add_full(struct kmem_cache *s,
 	struct kmem_cache_node *n, struct page *page)
 {
-	lockdep_assert_held(&n->list_lock);
-
 	if (!(s->flags & SLAB_STORE_USER))
 		return;
 
+	lockdep_assert_held(&n->list_lock);
 	list_add(&page->lru, &n->full);
 }
 
 static void remove_full(struct kmem_cache *s, struct kmem_cache_node *n, struct page *page)
 {
-	lockdep_assert_held(&n->list_lock);
-
 	if (!(s->flags & SLAB_STORE_USER))
 		return;
 
+	lockdep_assert_held(&n->list_lock);
 	list_del(&page->lru);
 }
 
@@ -1520,11 +1518,9 @@ static void discard_slab(struct kmem_cache *s, struct page *page)
 /*
  * Management of partially allocated slabs.
  */
-static inline void add_partial(struct kmem_cache_node *n,
-				struct page *page, int tail)
+static inline void
+__add_partial(struct kmem_cache_node *n, struct page *page, int tail)
 {
-	lockdep_assert_held(&n->list_lock);
-
 	n->nr_partial++;
 	if (tail == DEACTIVATE_TO_TAIL)
 		list_add_tail(&page->lru, &n->partial);
@@ -1532,15 +1528,27 @@ static inline void add_partial(struct kmem_cache_node *n,
 		list_add(&page->lru, &n->partial);
 }
 
-static inline void remove_partial(struct kmem_cache_node *n,
-					struct page *page)
+static inline void add_partial(struct kmem_cache_node *n,
+				struct page *page, int tail)
 {
 	lockdep_assert_held(&n->list_lock);
+	__add_partial(n, page, tail);
+}
 
+static inline void
+__remove_partial(struct kmem_cache_node *n, struct page *page)
+{
 	list_del(&page->lru);
 	n->nr_partial--;
 }
 
+static inline void remove_partial(struct kmem_cache_node *n,
+					struct page *page)
+{
+	lockdep_assert_held(&n->list_lock);
+	__remove_partial(n, page);
+}
+
 /*
  * Remove slab from the partial list, freeze it and
  * return the pointer to the freelist.
@@ -2906,12 +2914,10 @@ static void early_kmem_cache_node_alloc(int node)
 	inc_slabs_node(kmem_cache_node, node, page->objects);
 
 	/*
-	 * the lock is for lockdep's sake, not for any actual
-	 * race protection
+	 * No locks need to be taken here as it has just been
+	 * initialized and there is no concurrent access.
 	 */
-	spin_lock(&n->list_lock);
-	add_partial(n, page, DEACTIVATE_TO_HEAD);
-	spin_unlock(&n->list_lock);
+	__add_partial(n, page, DEACTIVATE_TO_HEAD);
 }
 
 static void free_kmem_cache_nodes(struct kmem_cache *s)
@@ -3197,7 +3203,7 @@ static void free_partial(struct kmem_cache *s, struct kmem_cache_node *n)
 
 	list_for_each_entry_safe(page, h, &n->partial, lru) {
 		if (!page->inuse) {
-			remove_partial(n, page);
+			__remove_partial(n, page);
 			discard_slab(s, page);
 		} else {
 			list_slab_objects(s, page,

scripts/checkpatch.pl

@@ -471,7 +471,7 @@ sub seed_camelcase_includes {
 
 	$camelcase_seeded = 1;
 
-	if (-d ".git") {
+	if (-e ".git") {
 		my $git_last_include_commit = `git log --no-merges --pretty=format:"%h%n" -1 -- include`;
 		chomp $git_last_include_commit;
 		$camelcase_cache = ".checkpatch-camelcase.git.$git_last_include_commit";
@@ -499,7 +499,7 @@ sub seed_camelcase_includes {
 		return;
 	}
 
-	if (-d ".git") {
+	if (-e ".git") {
 		$files = `git ls-files "include/*.h"`;
 		@include_files = split('\n', $files);
 	}

scripts/get_maintainer.pl

@@ -95,7 +95,7 @@ my %VCS_cmds;
 
 my %VCS_cmds_git = (
     "execute_cmd" => \&git_execute_cmd,
-    "available" => '(which("git") ne "") && (-d ".git")',
+    "available" => '(which("git") ne "") && (-e ".git")',
     "find_signers_cmd" =>
 	"git log --no-color --follow --since=\$email_git_since " .
 	    '--numstat --no-merges ' .