Skip to content

L
linux
Commit 679be37d authored by Guennadi Liakhovetski's avatar Guennadi Liakhovetski Committed by James Bottomley
Browse files
Options

[PATCH] tmscsim: init / exit cleanup 

On Sun, 23 May 2004, Christoph Hellwig wrote:
> these leaks.  Maybe also  merge dc390_init and dc390_init_one?
>
> Similarly I think DC390_release should be merged into dc390_remove_one.

Attached. Also fixed some __init / __devinit and __exit / __devexit
attributes. Although, would be good to have something like

#ifdef CONFIG_HOTPLUG_PCI
#define __pcidevinit
#define __pcidevinitdata
#define __pcidevexit
#define __pcidevexitdata
#else
#define __pcidevinit __init
#define __pcidevinitdata __initdata
#define __pcidevexit __exit
#define __pcidevexitdata __exitdata
#endif
Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
parent 2562d40e
Show whitespace changes
Inline Side-by-side
Showing with 104 additions and 150 deletions
drivers/scsi/tmscsim.c
View file @ 679be37d
......@@ -306,10 +306,6 @@ MODULE_DEVICE_TABLE(pci, tmscsim_pci_tbl);
#include "tmscsim.h"
#ifndef __init
# define __init
#endif
static UCHAR dc390_StartSCSI( PACB pACB, PDCB pDCB, PSRB pSRB );
static void dc390_DataOut_0( PACB pACB, PSRB pSRB, PUCHAR psstatus);
static void dc390_DataIn_0( PACB pACB, PSRB pSRB, PUCHAR psstatus);
......@@ -343,8 +339,6 @@ static int dc390_initAdapter( PSH psh, ULONG io_port, UCHAR Irq, UCHAR index
static void dc390_initDCB( PACB pACB, PDCB *ppDCB, UCHAR id, UCHAR lun);
static void dc390_updateDCB (PACB pACB, PDCB pDCB);
static int DC390_release(struct Scsi_Host *host);
static int dc390_shutdown (struct Scsi_Host *host);
static int DC390_proc_info (struct Scsi_Host *shpnt, char *buffer, char **start,
off_t offset, int length, int inout);
......@@ -433,7 +427,7 @@ static UCHAR dc390_clock_speed[] = {100,80,67,57,50, 40, 31, 20};
**********************************************************************/
static void __init dc390_EnDisableCE( UCHAR mode, PDEVDECL, PUCHAR regval )
static void __devinit dc390_EnDisableCE( UCHAR mode, PDEVDECL, PUCHAR regval )
{
UCHAR bval;
......@@ -450,7 +444,7 @@ static void __init dc390_EnDisableCE( UCHAR mode, PDEVDECL, PUCHAR regval )
/* Override EEprom values with explicitly set values */
static void __init dc390_EEprom_Override (UCHAR index)
static void __devinit dc390_EEprom_Override (UCHAR index)
{
PUCHAR ptr;
UCHAR id;
......@@ -477,7 +471,7 @@ static void __init dc390_EEprom_Override (UCHAR index)
}
/* Handle "-1" case */
static void __init dc390_check_for_safe_settings (void)
static void __devinit dc390_check_for_safe_settings (void)
{
if (tmscsim[0] == -1 || tmscsim[0] > 15) /* modules-2.0.0 passes -1 as string */
{
......@@ -500,7 +494,7 @@ static int __initdata tmscsim_def[] = {7, 0 /* 10MHz */,
, 3 /* 16 Tags per LUN */, 1 /* s delay after Reset */ };
/* Copy defaults over set values where missing */
static void __init dc390_fill_with_defaults (void)
static void __devinit dc390_fill_with_defaults (void)
{
int i;
PARSEDEBUG(printk(KERN_INFO "DC390: setup %08x %08x %08x %08x %08x %08x\n", tmscsim[0],\
......@@ -517,6 +511,7 @@ static void __init dc390_fill_with_defaults (void)
if (tmscsim[5] > 180) tmscsim[5] = 180;
}
#ifndef MODULE
/* Override defaults on cmdline:
* tmscsim: AdaptID, MaxSpeed (Index), DevMode (Bitmapped), AdaptMode (Bitmapped)
*/
......@@ -536,11 +531,11 @@ static int __init dc390_setup (char *str)
/* dc390_checkparams (); */
return 1;
}
#ifndef MODULE
__setup("tmscsim=", dc390_setup);
#endif
static void __init dc390_EEpromOutDI( PDEVDECL, PUCHAR regval, UCHAR Carry )
static void __devinit dc390_EEpromOutDI( PDEVDECL, PUCHAR regval, UCHAR Carry )
{
UCHAR bval;
......@@ -561,7 +556,7 @@ static void __init dc390_EEpromOutDI( PDEVDECL, PUCHAR regval, UCHAR Carry )
}
static UCHAR __init dc390_EEpromInDO( PDEVDECL )
static UCHAR __devinit dc390_EEpromInDO( PDEVDECL )
{
UCHAR bval;
......@@ -577,7 +572,7 @@ static UCHAR __init dc390_EEpromInDO( PDEVDECL )
}
static USHORT __init dc390_EEpromGetData1( PDEVDECL )
static USHORT __devinit dc390_EEpromGetData1( PDEVDECL )
{
UCHAR i;
UCHAR carryFlag;
......@@ -594,7 +589,7 @@ static USHORT __init dc390_EEpromGetData1( PDEVDECL )
}
static void __init dc390_Prepare( PDEVDECL, PUCHAR regval, UCHAR EEpromCmd )
static void __devinit dc390_Prepare( PDEVDECL, PUCHAR regval, UCHAR EEpromCmd )
{
UCHAR i,j;
UCHAR carryFlag;
......@@ -610,7 +605,7 @@ static void __init dc390_Prepare( PDEVDECL, PUCHAR regval, UCHAR EEpromCmd )
}
static void __init dc390_ReadEEprom( PDEVDECL, PUSHORT ptr)
static void __devinit dc390_ReadEEprom( PDEVDECL, PUSHORT ptr)
{
UCHAR regval,cmd;
UCHAR i;
......@@ -626,13 +621,13 @@ static void __init dc390_ReadEEprom( PDEVDECL, PUSHORT ptr)
}
static void __init dc390_interpret_delay (UCHAR index)
static void __devinit dc390_interpret_delay (UCHAR index)
{
char interpd [] = {1,3,5,10,16,30,60,120};
dc390_eepromBuf[index][EE_DELAY] = interpd [dc390_eepromBuf[index][EE_DELAY]];
}
static UCHAR __init dc390_CheckEEpromCheckSum( PDEVDECL, UCHAR index )
static UCHAR __devinit dc390_CheckEEpromCheckSum( PDEVDECL, UCHAR index )
{
UCHAR i;
char EEbuf[128];
......@@ -1691,7 +1686,7 @@ static void dc390_linkSRB( PACB pACB )
* io_port, Irq, index: Resources and adapter index
***********************************************************************/
static void __init dc390_initACB (PSH psh, ULONG io_port, UCHAR Irq, UCHAR index)
static void __devinit dc390_initACB (PSH psh, ULONG io_port, UCHAR Irq, UCHAR index)
{
PACB pACB;
UCHAR i;
......@@ -1762,7 +1757,7 @@ static void __init dc390_initACB (PSH psh, ULONG io_port, UCHAR Irq, UCHAR index
* Outputs: 0 on success, -1 on error
***********************************************************************/
static int __init dc390_initAdapter (PSH psh, ULONG io_port, UCHAR Irq, UCHAR index)
static int __devinit dc390_initAdapter (PSH psh, ULONG io_port, UCHAR Irq, UCHAR index)
{
PACB pACB, pACB2;
UCHAR dstate;
......@@ -1833,65 +1828,7 @@ static int __init dc390_initAdapter (PSH psh, ULONG io_port, UCHAR Irq, UCHAR in
}
/***********************************************************************
* Function : static int DC390_init (struct Scsi_Host *host, ...)
*
* Purpose : initialize the internal structures for a given SCSI host
*
* Inputs : host - pointer to this host adapter's structure
* io_port - IO ports mapped to this adapter
* irq - IRQ assigned to this adpater
* struct pci_dev - PCI access handle
* index - Adapter index
*
* Outputs: 0 on success, -1 on error
*
* Note: written in capitals, because the locking is only done here,
* not in DC390_detect, called from outside
***********************************************************************/
static int __init dc390_init (PSH psh, unsigned long io_port, u8 irq, struct pci_dev *pdev, UCHAR index)
{
PACB pACB;
if (dc390_CheckEEpromCheckSum (PDEV, index))
{
int speed;
dc390_adapname = "AM53C974";
printk (KERN_INFO "DC390_init: No EEPROM found! Trying default settings ...\n");
dc390_check_for_safe_settings ();
dc390_fill_with_defaults ();
dc390_EEprom_Override (index);
speed = dc390_clock_speed[tmscsim[1]];
printk (KERN_INFO "DC390: Used defaults: AdaptID=%i, SpeedIdx=%i (%i.%i MHz),"
" DevMode=0x%02x, AdaptMode=0x%02x, TaggedCmnds=%i (%i), DelayReset=%is\n",
tmscsim[0], tmscsim[1], speed/10, speed%10,
(UCHAR)tmscsim[2], (UCHAR)tmscsim[3], tmscsim[4], 2 << (tmscsim[4]), tmscsim[5]);
}
else
{
dc390_check_for_safe_settings ();
dc390_EEprom_Override (index);
}
pACB = (PACB) psh->hostdata;
DEBUG0(printk(KERN_INFO "DC390: pSH = %8x, Index %02i\n", (UINT) psh, index));
dc390_initACB( psh, io_port, irq, index );
PDEVSET;
if( !dc390_initAdapter( psh, io_port, irq, index ) )
{
return (0);
}
else
{
scsi_unregister( psh );
return( -1 );
}
}
static void __init dc390_set_pci_cfg (PDEVDECL)
static void __devinit dc390_set_pci_cfg (PDEVDECL)
{
USHORT cmd;
PCI_READ_CONFIG_WORD (PDEV, PCI_COMMAND, &cmd);
......@@ -1984,7 +1921,31 @@ static int __devinit dc390_init_one(struct pci_dev *dev,
pACB = (PACB) scsi_host->hostdata;
if (dc390_init(scsi_host, io_port, irq, dev, dc390_adapterCnt)) {
if (dc390_CheckEEpromCheckSum (dev, dc390_adapterCnt)) {
int speed;
dc390_adapname = "AM53C974";
printk(KERN_INFO "DC390_init: No EEPROM found! Trying default settings ...\n");
dc390_check_for_safe_settings();
dc390_fill_with_defaults();
dc390_EEprom_Override(dc390_adapterCnt);
speed = dc390_clock_speed[tmscsim[1]];
printk(KERN_INFO "DC390: Used defaults: AdaptID=%i, SpeedIdx=%i (%i.%i MHz),"
" DevMode=0x%02x, AdaptMode=0x%02x, TaggedCmnds=%i (%i), DelayReset=%is\n",
tmscsim[0], tmscsim[1], speed/10, speed%10,
(UCHAR)tmscsim[2], (UCHAR)tmscsim[3], tmscsim[4], 2 << (tmscsim[4]), tmscsim[5]);
} else {
dc390_check_for_safe_settings();
dc390_EEprom_Override(dc390_adapterCnt);
}
DEBUG0(printk(KERN_INFO "DC390: pSH = %8x, Index %02i\n", (UINT) scsi_host, dc390_adapterCnt));
dc390_initACB(scsi_host, io_port, irq, dc390_adapterCnt);
pACB->pdev = dev;
if (dc390_initAdapter(scsi_host, io_port, irq, dc390_adapterCnt)) {
scsi_unregister(scsi_host);
ret = -EBUSY;
goto busy;
}
......@@ -2011,6 +1972,52 @@ static int __devinit dc390_init_one(struct pci_dev *dev,
return ret;
}
static void __devexit dc390_freeDCBs (struct Scsi_Host *host)
{
PDCB pDCB, nDCB;
PACB pACB = (PACB) host->hostdata;
pDCB = pACB->pLinkDCB;
if (!pDCB) return;
do
{
nDCB = pDCB->pNextDCB;
DCBDEBUG(printk (KERN_INFO "DC390: Free DCB (ID %i, LUN %i): %p\n",\
pDCB->TargetID, pDCB->TargetLUN, pDCB));
//kfree (pDCB);
dc390_remove_dev (pACB, pDCB);
pDCB = nDCB;
} while (pDCB && pACB->pLinkDCB);
}
/***********************************************************************
* Function : static int dc390_shutdown (struct Scsi_Host *host)
*
* Purpose : does a clean (we hope) shutdown of the SCSI chip.
* Use prior to dumping core, unloading the driver, etc.
*
* Returns : 0 on success
***********************************************************************/
static int __devexit dc390_shutdown (struct Scsi_Host *host)
{
UCHAR bval;
PACB pACB = (PACB) host->hostdata;
/* pACB->soft_reset(host); */
printk(KERN_INFO "DC390: shutdown\n");
pACB->ACBFlag = RESET_DEV;
bval = DC390_read8 (CtrlReg1);
bval |= DIS_INT_ON_SCSI_RST;
DC390_write8 (CtrlReg1, bval); /* disable interrupt */
if (pACB->Gmode2 & RST_SCSI_BUS)
dc390_ResetSCSIBus (pACB);
if (timer_pending (&pACB->Waiting_Timer)) del_timer (&pACB->Waiting_Timer);
return( 0 );
}
/**
* dc390_remove_one - Called to remove a single instance of the adapter.
*
......@@ -2019,9 +2026,25 @@ static int __devinit dc390_init_one(struct pci_dev *dev,
static void __devexit dc390_remove_one(struct pci_dev *dev)
{
struct Scsi_Host *scsi_host = pci_get_drvdata(dev);
DC390_IFLAGS;
PACB pACB = (PACB) scsi_host->hostdata;
scsi_remove_host(scsi_host);
DC390_release(scsi_host);
DC390_LOCK_IO(scsi_host);
/* TO DO: We should check for outstanding commands first. */
dc390_shutdown(scsi_host);
if (scsi_host->irq != SCSI_IRQ_NONE) {
DEBUG0(printk(KERN_INFO "DC390: Free IRQ %i\n", scsi_host->irq));
free_irq(scsi_host->irq, pACB);
}
release_region(scsi_host->io_port, scsi_host->n_io_port);
dc390_freeDCBs(scsi_host);
DC390_UNLOCK_IO(scsi_host);
pci_disable_device(dev);
scsi_host_put(scsi_host);
pci_set_drvdata(dev, NULL);
......@@ -2173,75 +2196,6 @@ static int DC390_proc_info (struct Scsi_Host *shpnt, char *buffer, char **start,
#undef YESNO
#undef SPRINTF
/***********************************************************************
* Function : static int dc390_shutdown (struct Scsi_Host *host)
*
* Purpose : does a clean (we hope) shutdown of the SCSI chip.
* Use prior to dumping core, unloading the driver, etc.
*
* Returns : 0 on success
***********************************************************************/
static int dc390_shutdown (struct Scsi_Host *host)
{
UCHAR bval;
PACB pACB = (PACB) host->hostdata;
/* pACB->soft_reset(host); */
printk(KERN_INFO "DC390: shutdown\n");
pACB->ACBFlag = RESET_DEV;
bval = DC390_read8 (CtrlReg1);
bval |= DIS_INT_ON_SCSI_RST;
DC390_write8 (CtrlReg1, bval); /* disable interrupt */
if (pACB->Gmode2 & RST_SCSI_BUS)
dc390_ResetSCSIBus (pACB);
if (timer_pending (&pACB->Waiting_Timer)) del_timer (&pACB->Waiting_Timer);
return( 0 );
}
static void dc390_freeDCBs (struct Scsi_Host *host)
{
PDCB pDCB, nDCB;
PACB pACB = (PACB) host->hostdata;
pDCB = pACB->pLinkDCB;
if (!pDCB) return;
do
{
nDCB = pDCB->pNextDCB;
DCBDEBUG(printk (KERN_INFO "DC390: Free DCB (ID %i, LUN %i): %p\n",\
pDCB->TargetID, pDCB->TargetLUN, pDCB));
//kfree (pDCB);
dc390_remove_dev (pACB, pDCB);
pDCB = nDCB;
} while (pDCB && pACB->pLinkDCB);
}
static int DC390_release (struct Scsi_Host *host)
{
DC390_IFLAGS;
PACB pACB = (PACB) host->hostdata;
DC390_LOCK_IO(host);
/* TO DO: We should check for outstanding commands first. */
dc390_shutdown (host);
if (host->irq != SCSI_IRQ_NONE)
{
DEBUG0(printk(KERN_INFO "DC390: Free IRQ %i\n",host->irq));
free_irq (host->irq, pACB);
}
release_region(host->io_port,host->n_io_port);
dc390_freeDCBs (host);
DC390_UNLOCK_IO(host);
return( 1 );
}
static struct pci_driver dc390_driver = {
.name = "tmscsim",
.id_table = tmscsim_pci_tbl,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7