Commit 68046d50 authored by Ondrej Zary's avatar Ondrej Zary Committed by Martin K. Petersen

scsi: fdomain: Resurrect driver - PCI support

Future Domain TMC-3260/AHA-2920A PCI card support.

Tested on Adaptec AHA-2920A PCI card.
Signed-off-by: default avatarOndrej Zary <linux@zary.sk>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent ebeb4665
...@@ -645,6 +645,23 @@ config SCSI_FDOMAIN ...@@ -645,6 +645,23 @@ config SCSI_FDOMAIN
tristate tristate
depends on SCSI depends on SCSI
config SCSI_FDOMAIN_PCI
tristate "Future Domain TMC-3260/AHA-2920A PCI SCSI support"
depends on PCI && SCSI
select SCSI_FDOMAIN
help
This is support for Future Domain's PCI SCSI host adapters (TMC-3260)
and other adapters with PCI bus based on the Future Domain chipsets
(Adaptec AHA-2920A).
NOTE: Newer Adaptec AHA-2920C boards use the Adaptec AIC-7850 chip
and should use the aic7xxx driver ("Adaptec AIC7xxx chipset SCSI
controller support"). This Future Domain driver works with the older
Adaptec AHA-2920A boards with a Future Domain chip on them.
To compile this driver as a module, choose M here: the
module will be called fdomain_pci.
config SCSI_GDTH config SCSI_GDTH
tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support" tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
depends on PCI && SCSI depends on PCI && SCSI
......
...@@ -77,6 +77,7 @@ obj-$(CONFIG_SCSI_PM8001) += pm8001/ ...@@ -77,6 +77,7 @@ obj-$(CONFIG_SCSI_PM8001) += pm8001/
obj-$(CONFIG_SCSI_ISCI) += isci/ obj-$(CONFIG_SCSI_ISCI) += isci/
obj-$(CONFIG_SCSI_IPS) += ips.o obj-$(CONFIG_SCSI_IPS) += ips.o
obj-$(CONFIG_SCSI_FDOMAIN) += fdomain.o obj-$(CONFIG_SCSI_FDOMAIN) += fdomain.o
obj-$(CONFIG_SCSI_FDOMAIN_PCI) += fdomain_pci.o
obj-$(CONFIG_SCSI_GENERIC_NCR5380) += g_NCR5380.o obj-$(CONFIG_SCSI_GENERIC_NCR5380) += g_NCR5380.o
obj-$(CONFIG_SCSI_QLOGIC_FAS) += qlogicfas408.o qlogicfas.o obj-$(CONFIG_SCSI_QLOGIC_FAS) += qlogicfas408.o qlogicfas.o
obj-$(CONFIG_PCMCIA_QLOGIC) += qlogicfas408.o obj-$(CONFIG_PCMCIA_QLOGIC) += qlogicfas408.o
......
// SPDX-License-Identifier: GPL-2.0
#include <linux/module.h>
#include <linux/pci.h>
#include "fdomain.h"
static int fdomain_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *d)
{
int err;
struct Scsi_Host *sh;
err = pci_enable_device(pdev);
if (err)
goto fail;
err = pci_request_regions(pdev, "fdomain_pci");
if (err)
goto disable_device;
err = -ENODEV;
if (pci_resource_len(pdev, 0) == 0)
goto release_region;
sh = fdomain_create(pci_resource_start(pdev, 0), pdev->irq, 7,
&pdev->dev);
if (!sh)
goto release_region;
pci_set_drvdata(pdev, sh);
return 0;
release_region:
pci_release_regions(pdev);
disable_device:
pci_disable_device(pdev);
fail:
return err;
}
static void fdomain_pci_remove(struct pci_dev *pdev)
{
struct Scsi_Host *sh = pci_get_drvdata(pdev);
fdomain_destroy(sh);
pci_release_regions(pdev);
pci_disable_device(pdev);
}
static struct pci_device_id fdomain_pci_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_FD, PCI_DEVICE_ID_FD_36C70) },
{}
};
MODULE_DEVICE_TABLE(pci, fdomain_pci_table);
static struct pci_driver fdomain_pci_driver = {
.name = "fdomain_pci",
.id_table = fdomain_pci_table,
.probe = fdomain_pci_probe,
.remove = fdomain_pci_remove,
.driver.pm = FDOMAIN_PM_OPS,
};
module_pci_driver(fdomain_pci_driver);
MODULE_AUTHOR("Ondrej Zary, Rickard E. Faith");
MODULE_DESCRIPTION("Future Domain TMC-3260 PCI SCSI driver");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment