[IA64-SGI] - New SN hardware support - cpu_relax

Add a few missing calls to "hint @pause".
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

arch/ia64/sn/kernel/bte.c

@@ -215,6 +215,7 @@ bte_result_t bte_copy(u64 src, u64 dest, u64 len, u64 mode, void *notification)
 	}
 
 	while ((transfer_stat = *bte->most_rcnt_na) == BTE_WORD_BUSY) {
+		cpu_relax();
 		if (ia64_get_itc() > itc_end) {
 			BTE_PRINTK(("BTE timeout nasid 0x%x bte%d IBLS = 0x%lx na 0x%lx\n",
 				NASID_GET(bte->bte_base_addr), bte->bte_num,

arch/ia64/sn/kernel/huberror.c

@@ -76,7 +76,7 @@ void hubiio_crb_free(struct hubdev_info *hubdev_info, int crbnum)
 	 */
 	REMOTE_HUB_S(hubdev_info->hdi_nasid, IIO_ICDR, (IIO_ICDR_PND | crbnum));
 	while (REMOTE_HUB_L(hubdev_info->hdi_nasid, IIO_ICDR) & IIO_ICDR_PND)
-		udelay(1);
+		cpu_relax();
 
 }
 

arch/ia64/sn/pci/pcibr/pcibr_dma.c

@@ -317,7 +317,8 @@ void sn_dma_flush(uint64_t addr)
 		*(volatile uint32_t *)(p->sfdl_force_int_addr) = 1;
 
 		/* wait for the interrupt to come back. */
-		while (*(p->sfdl_flush_addr) != 0x10f) ;
+		while (*(p->sfdl_flush_addr) != 0x10f)
+			cpu_relax();
 
 		/* okay, everything is synched up. */
 		spin_unlock_irqrestore((spinlock_t *)&p->sfdl_flush_lock, flags);

include/asm-ia64/sn/sn_sal.h

@@ -749,7 +749,8 @@ ia64_sn_power_down(void)
 {
 	struct ia64_sal_retval ret_stuff;
 	SAL_CALL(ret_stuff, SN_SAL_SYSTEM_POWER_DOWN, 0, 0, 0, 0, 0, 0, 0);
-	while(1);
+	while(1)
+		cpu_relax();
 	/* never returns */
 }