Commit 68d59693 authored by Ben Dooks's avatar Ben Dooks Committed by Russell King

[ARM] 3552/1: S3C24XX: Move VA of GPIO for low-level debug

Patch from Ben Dooks

Using the low-level debug routines early in the
kernel debug cause the 1:1 mapping to get into
the TLB, which is not flushed until after the
CPU detection process (which needs the GPIO VA).

This patch moves the VA for the GPIO to the
same offset as the physical offset of the UART
to the GPIO.
Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 4833acb2
...@@ -126,9 +126,18 @@ ...@@ -126,9 +126,18 @@
#define S3C24XX_SZ_IIS SZ_1M #define S3C24XX_SZ_IIS SZ_1M
/* GPIO ports */ /* GPIO ports */
#define S3C24XX_VA_GPIO S3C2410_ADDR(0x00E00000)
/* the calculation for the VA of this must ensure that
* it is the same distance apart from the UART in the
* phsyical address space, as the initial mapping for the IO
* is done as a 1:1 maping. This puts it (currently) at
* 0xF6800000, which is not in the way of any current mapping
* by the base system.
*/
#define S3C2400_PA_GPIO (0x15600000) #define S3C2400_PA_GPIO (0x15600000)
#define S3C2410_PA_GPIO (0x56000000) #define S3C2410_PA_GPIO (0x56000000)
#define S3C24XX_VA_GPIO ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
#define S3C24XX_SZ_GPIO SZ_1M #define S3C24XX_SZ_GPIO SZ_1M
/* RTC */ /* RTC */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment