ARM: dts: imx6ull-colibri: reduce v_batt current in power off

Reduce the current drawn from VCC_BATT when the main power on the 3V3
pins to the module are switched off.

This switches off SoC internal pull resistors which are provided on the
module for TAMPER7 and TAMPER9 SoC pin and switches on a pull down
instead of a pullup for the USBC_DET module pin (TAMPER2).
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/imx6ull-colibri.dtsi

@@ -533,19 +533,19 @@ MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x14 /* SODIMM 127 */
 
 	pinctrl_snvs_ad7879_int: snvs-ad7879-int-grp { /* TOUCH Interrupt */
 		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x1b0b0
+			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x100b0
 		>;
 	};
 
 	pinctrl_snvs_reg_sd: snvs-reg-sd-grp {
 		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x4001b8b0
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x400100b0
 		>;
 	};
 
 	pinctrl_snvs_usbc_det: snvs-usbc-det-grp {
 		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1b0b0
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x130b0
 		>;
 	};