Commit 6981e2af authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:
 "This is a rather unpleasantly large set of bug fixes for arm-soc, Most
  of them because of cross-tree dependencies for Exynos where we should
  have figured out the right path to merge things before the merge
  window, and then the maintainer being unable to sort things out in
  time during a business trip.

  The other changes contained here are the usual collection:

  MAINTAINERS file updates
   - Gregory Clement is now a co-maintainer for the legacy Marvell EBU
     platforms
   - A MAINTAINERS entry for the Freescale Vybrid platform that was
     added last year
   - Matt Porter no longer works as a maintainer on Broadcom SoCs

  Build-time issues
   - A compile-time error for at91
   - Several minor DT fixes on at91, imx, exynos, socfpga, and omap
   - The new digicolor platform was not correctly enabled at all

  Configuration issues
   - Two defconfig fix for regressions using USB on versatile express
     and on OMAP3
   - Enabling all 8 CPUs on Allwinner/SUNxi
   - Enabling the new STiH410 platform to be usable

  Bug fixes in platform code
   - A missing barrier for socfpga
   - Fixing LPDDR1 self-refresh mode on at91
   - Fixing RTC interrupt numbers on Exynos3250
   - Fixing a cache-coherency issues in CPU power-down on Exynos5
   - Multiple small OMAP power management fixes"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (69 commits)
  MAINTAINERS: Add myself as co-maintainer to the legacy support of the mvebu SoCs
  ARM: at91: pm_slowclock: fix the compilation error
  ARM: at91/dt: fix USB high-speed clock to select UTMI
  ARM: at91/dt: fix at91 udc compatible strings
  ARM: at91/dt: declare matrix node as a syscon device
  ARM: vexpress: update CONFIG_USB_ISP1760 option
  ARM: digicolor: add the machine directory to Makefile
  ARM: STi: Add STiH410 SoC support
  MAINTAINERS: add Freescale Vybrid SoC
  MAINTAINERS: Remove self as ARM mach-bcm co-maintainer
  ARM: imx6sl-evk: set swbst_reg as vbus's parent reg
  ARM: imx6qdl-sabresd: set swbst_reg as vbus's parent reg
  ARM: at91/dt: at91sam9261: fix clocks and clock-names in udc definition
  ARM: OMAP2+: Fix wl12xx on dm3730-evm with mainline u-boot
  ARM: OMAP: enable TWL4030_USB in omap2plus_defconfig
  ARM: dts: dra7x-evm: avoid possible contention while muxing on CAN lines
  ARM: dts: dra7x-evm: Don't use dcan1_rx.gpio1_15 in DCAN pinctrl
  ARM: dts: am43xx: fix SLEWCTRL_FAST pinctrl binding
  ARM: dts: am33xx: fix SLEWCTRL_FAST pinctrl binding
  ARM: dts: OMAP5: fix polling intervals for thermal zones
  ...
parents 71c87bd0 bfda4031
......@@ -22,6 +22,8 @@ Optional Properties:
- pclkN, clkN: Pairs of parent of input clock and input clock to the
devices in this power domain. Maximum of 4 pairs (N = 0 to 3)
are supported currently.
- power-domains: phandle pointing to the parent power domain, for more details
see Documentation/devicetree/bindings/power/power_domain.txt
Node of a device using power domains must have a power-domains property
defined with a phandle to respective power domain.
......
......@@ -13,6 +13,10 @@ Boards with the ST STiH407 SoC shall have the following properties:
Required root node property:
compatible = "st,stih407";
Boards with the ST STiH410 SoC shall have the following properties:
Required root node property:
compatible = "st,stih410";
Boards with the ST STiH418 SoC shall have the following properties:
Required root node property:
compatible = "st,stih418";
......
......@@ -19,6 +19,16 @@ Required properties:
providing multiple PM domains (e.g. power controllers), but can be any value
as specified by device tree binding documentation of particular provider.
Optional properties:
- power-domains : A phandle and PM domain specifier as defined by bindings of
the power controller specified by phandle.
Some power domains might be powered from another power domain (or have
other hardware specific dependencies). For representing such dependency
a standard PM domain consumer binding is used. When provided, all domains
created by the given provider should be subdomains of the domain
specified by this binding. More details about power domain specifier are
available in the next section.
Example:
power: power-controller@12340000 {
......@@ -30,6 +40,25 @@ Example:
The node above defines a power controller that is a PM domain provider and
expects one cell as its phandle argument.
Example 2:
parent: power-controller@12340000 {
compatible = "foo,power-controller";
reg = <0x12340000 0x1000>;
#power-domain-cells = <1>;
};
child: power-controller@12340000 {
compatible = "foo,power-controller";
reg = <0x12341000 0x1000>;
power-domains = <&parent 0>;
#power-domain-cells = <1>;
};
The nodes above define two power controllers: 'parent' and 'child'.
Domains created by the 'child' power controller are subdomains of '0' power
domain provided by the 'parent' power controller.
==PM domain consumers==
Required properties:
......
......@@ -26,6 +26,11 @@ Optional properties:
- atmel,disable : Should be present if you want to disable the watchdog.
- atmel,idle-halt : Should be present if you want to stop the watchdog when
entering idle state.
CAUTION: This property should be used with care, it actually makes the
watchdog not counting when the CPU is in idle state, therefore the
watchdog reset time depends on mean CPU usage and will not reset at all
if the CPU stop working while it is in idle state, which is probably
not what you want.
- atmel,dbg-halt : Should be present if you want to stop the watchdog when
entering debug state.
......
......@@ -1030,6 +1030,16 @@ F: arch/arm/mach-mxs/
F: arch/arm/boot/dts/imx*
F: arch/arm/configs/imx*_defconfig
ARM/FREESCALE VYBRID ARM ARCHITECTURE
M: Shawn Guo <shawn.guo@linaro.org>
M: Sascha Hauer <kernel@pengutronix.de>
R: Stefan Agner <stefan@agner.ch>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git
F: arch/arm/mach-imx/*vf610*
F: arch/arm/boot/dts/vf*
ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
......@@ -1188,6 +1198,7 @@ ARM/Marvell Dove/MV78xx0/Orion SOC support
M: Jason Cooper <jason@lakedaemon.net>
M: Andrew Lunn <andrew@lunn.ch>
M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
M: Gregory Clement <gregory.clement@free-electrons.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-dove/
......@@ -2107,7 +2118,6 @@ F: drivers/net/ethernet/broadcom/bnx2x/
BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
M: Christian Daudt <bcm@fixthebug.org>
M: Matt Porter <mporter@linaro.org>
M: Florian Fainelli <f.fainelli@gmail.com>
L: bcm-kernel-feedback-list@broadcom.com
T: git git://github.com/broadcom/mach-bcm
......
......@@ -150,6 +150,7 @@ machine-$(CONFIG_ARCH_BERLIN) += berlin
machine-$(CONFIG_ARCH_CLPS711X) += clps711x
machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx
machine-$(CONFIG_ARCH_DAVINCI) += davinci
machine-$(CONFIG_ARCH_DIGICOLOR) += digicolor
machine-$(CONFIG_ARCH_DOVE) += dove
machine-$(CONFIG_ARCH_EBSA110) += ebsa110
machine-$(CONFIG_ARCH_EFM32) += efm32
......
......@@ -301,3 +301,11 @@ &mmc1 {
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
cd-inverted;
};
&aes {
status = "okay";
};
&sham {
status = "okay";
};
......@@ -24,11 +24,3 @@ &ldo3_reg {
&mmc1 {
vmmc-supply = <&ldo3_reg>;
};
&sham {
status = "okay";
};
&aes {
status = "okay";
};
......@@ -328,6 +328,10 @@ &cpsw_emac1 {
dual_emac_res_vlan = <3>;
};
&phy_sel {
rmii-clock-ext;
};
&mac {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
......
......@@ -99,7 +99,7 @@ rng_fck: rng_fck {
ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <0>;
reg = <0x0664>;
};
......@@ -107,7 +107,7 @@ ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 {
ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <1>;
reg = <0x0664>;
};
......@@ -115,7 +115,7 @@ ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 {
ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <2>;
reg = <0x0664>;
};
......
......@@ -107,7 +107,7 @@ aes0_fck: aes0_fck {
ehrpwm0_tbclk: ehrpwm0_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <0>;
reg = <0x0664>;
};
......@@ -115,7 +115,7 @@ ehrpwm0_tbclk: ehrpwm0_tbclk {
ehrpwm1_tbclk: ehrpwm1_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <1>;
reg = <0x0664>;
};
......@@ -123,7 +123,7 @@ ehrpwm1_tbclk: ehrpwm1_tbclk {
ehrpwm2_tbclk: ehrpwm2_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <2>;
reg = <0x0664>;
};
......@@ -131,7 +131,7 @@ ehrpwm2_tbclk: ehrpwm2_tbclk {
ehrpwm3_tbclk: ehrpwm3_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <4>;
reg = <0x0664>;
};
......@@ -139,7 +139,7 @@ ehrpwm3_tbclk: ehrpwm3_tbclk {
ehrpwm4_tbclk: ehrpwm4_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <5>;
reg = <0x0664>;
};
......@@ -147,7 +147,7 @@ ehrpwm4_tbclk: ehrpwm4_tbclk {
ehrpwm5_tbclk: ehrpwm5_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <6>;
reg = <0x0664>;
};
......
......@@ -494,12 +494,12 @@ pinctrl_usart3: usart3-0 {
pinctrl_usart3_rts: usart3_rts-0 {
atmel,pins =
<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC8 periph B */
<AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_usart3_cts: usart3_cts-0 {
atmel,pins =
<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC10 periph B */
<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
};
......@@ -853,7 +853,7 @@ macb0: ethernet@fffc4000 {
};
usb1: gadget@fffa4000 {
compatible = "atmel,at91rm9200-udc";
compatible = "atmel,at91sam9260-udc";
reg = <0xfffa4000 0x4000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&udc_clk>, <&udpck>;
......@@ -976,7 +976,6 @@ watchdog@fffffd40 {
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};
......
......@@ -124,11 +124,12 @@ tcb0: timer@fffa0000 {
};
usb1: gadget@fffa4000 {
compatible = "atmel,at91rm9200-udc";
compatible = "atmel,at91sam9261-udc";
reg = <0xfffa4000 0x4000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&udc_clk>, <&udpck>;
clock-names = "usb_clk", "udc_clk", "udpck";
clocks = <&udc_clk>, <&udpck>;
clock-names = "pclk", "hclk";
atmel,matrix = <&matrix>;
status = "disabled";
};
......@@ -262,7 +263,7 @@ ramc: ramc@ffffea00 {
};
matrix: matrix@ffffee00 {
compatible = "atmel,at91sam9260-bus-matrix";
compatible = "atmel,at91sam9260-bus-matrix", "syscon";
reg = <0xffffee00 0x200>;
};
......
......@@ -69,7 +69,7 @@ sram0: sram@00300000 {
sram1: sram@00500000 {
compatible = "mmio-sram";
reg = <0x00300000 0x4000>;
reg = <0x00500000 0x4000>;
};
ahb {
......@@ -856,7 +856,7 @@ macb0: ethernet@fffbc000 {
};
usb1: gadget@fff78000 {
compatible = "atmel,at91rm9200-udc";
compatible = "atmel,at91sam9263-udc";
reg = <0xfff78000 0x4000>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&udc_clk>, <&udpck>;
......@@ -905,7 +905,6 @@ watchdog@fffffd40 {
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};
......
......@@ -1116,7 +1116,6 @@ watchdog@fffffd40 {
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};
......@@ -1301,7 +1300,7 @@ usb1: ehci@00800000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00800000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
clocks = <&utmi>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck";
status = "disabled";
};
......
......@@ -894,7 +894,6 @@ watchdog@fffffe40 {
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};
......
......@@ -1066,7 +1066,7 @@ usb2: gadget@f803c000 {
reg = <0x00500000 0x80000
0xf803c000 0x400>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&usb>, <&udphs_clk>;
clocks = <&utmi>, <&udphs_clk>;
clock-names = "hclk", "pclk";
status = "disabled";
......@@ -1130,7 +1130,6 @@ watchdog@fffffe40 {
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};
......@@ -1186,7 +1185,7 @@ usb1: ehci@00700000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ehci_clk", "uhpck";
status = "disabled";
};
......
......@@ -263,17 +263,15 @@ davinci_mdio_sleep: davinci_mdio_sleep {
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
0x3d4 (MUX_MODE15) /* dcan1_rx.off */
0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
>;
};
dcan1_pins_sleep: dcan1_pins_sleep {
pinctrl-single,pins = <
0x3d0 (MUX_MODE15) /* dcan1_tx.off */
0x3d4 (MUX_MODE15) /* dcan1_rx.off */
0x418 (MUX_MODE15) /* wakeup0.off */
0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */
>;
};
};
......
......@@ -119,17 +119,15 @@ mmc2_pins_default: mmc2_pins_default {
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
0x3d4 (MUX_MODE15) /* dcan1_rx.off */
0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
>;
};
dcan1_pins_sleep: dcan1_pins_sleep {
pinctrl-single,pins = <
0x3d0 (MUX_MODE15) /* dcan1_tx.off */
0x3d4 (MUX_MODE15) /* dcan1_rx.off */
0x418 (MUX_MODE15) /* wakeup0.off */
0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */
>;
};
......
......@@ -243,10 +243,18 @@ dpll_abe_m3x2_ck: dpll_abe_m3x2_ck {
ti,invert-autoidle-bit;
};
dpll_core_byp_mux: dpll_core_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
ti,bit-shift = <23>;
reg = <0x012c>;
};
dpll_core_ck: dpll_core_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-core-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
clocks = <&sys_clkin1>, <&dpll_core_byp_mux>;
reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
};
......@@ -309,10 +317,18 @@ dsp_dpll_hs_clk_div: dsp_dpll_hs_clk_div {
clock-div = <1>;
};
dpll_dsp_byp_mux: dpll_dsp_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x0240>;
};
dpll_dsp_ck: dpll_dsp_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>;
reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>;
};
......@@ -335,10 +351,18 @@ iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
clock-div = <1>;
};
dpll_iva_byp_mux: dpll_iva_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x01ac>;
};
dpll_iva_ck: dpll_iva_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>;
reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
};
......@@ -361,10 +385,18 @@ iva_dclk: iva_dclk {
clock-div = <1>;
};
dpll_gpu_byp_mux: dpll_gpu_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
ti,bit-shift = <23>;
reg = <0x02e4>;
};
dpll_gpu_ck: dpll_gpu_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>;
reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
};
......@@ -398,10 +430,18 @@ core_dpll_out_dclk_div: core_dpll_out_dclk_div {
clock-div = <1>;
};
dpll_ddr_byp_mux: dpll_ddr_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
ti,bit-shift = <23>;
reg = <0x021c>;
};
dpll_ddr_ck: dpll_ddr_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>;
reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>;
};
......@@ -416,10 +456,18 @@ dpll_ddr_m2_ck: dpll_ddr_m2_ck {
ti,invert-autoidle-bit;
};
dpll_gmac_byp_mux: dpll_gmac_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
ti,bit-shift = <23>;
reg = <0x02b4>;
};
dpll_gmac_ck: dpll_gmac_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>;
reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>;
};
......@@ -482,10 +530,18 @@ eve_dpll_hs_clk_div: eve_dpll_hs_clk_div {
clock-div = <1>;
};
dpll_eve_byp_mux: dpll_eve_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x0290>;
};
dpll_eve_ck: dpll_eve_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>;
reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>;
};
......@@ -1249,10 +1305,18 @@ apll_pcie_m2_ck: apll_pcie_m2_ck {
clock-div = <1>;
};
dpll_per_byp_mux: dpll_per_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x014c>;
};
dpll_per_ck: dpll_per_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
clocks = <&sys_clkin1>, <&dpll_per_byp_mux>;
reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
};
......@@ -1275,10 +1339,18 @@ func_96m_aon_dclk_div: func_96m_aon_dclk_div {
clock-div = <1>;
};
dpll_usb_byp_mux: dpll_usb_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x018c>;
};
dpll_usb_ck: dpll_usb_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-j-type-clock";
clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>;
reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
};
......
......@@ -18,6 +18,7 @@
*/
#include "skeleton.dtsi"
#include "exynos4-cpu-thermal.dtsi"
#include <dt-bindings/clock/exynos3250.h>
/ {
......@@ -193,6 +194,7 @@ tmu: tmu@100C0000 {
interrupts = <0 216 0>;
clocks = <&cmu CLK_TMU_APBIF>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
status = "disabled";
};
......
/*
* Device tree sources for Exynos4 thermal zone
*
* Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <dt-bindings/thermal/thermal.h>
/ {
thermal-zones {
cpu_thermal: cpu-thermal {
thermal-sensors = <&tmu 0>;
polling-delay-passive = <0>;
polling-delay = <0>;
trips {
cpu_alert0: cpu-alert-0 {
temperature = <70000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu_alert1: cpu-alert-1 {
temperature = <95000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu_alert2: cpu-alert-2 {
temperature = <110000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu_crit0: cpu-crit-0 {
temperature = <120000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu_alert0>;
};
map1 {
trip = <&cpu_alert1>;
};
};
};
};
};
......@@ -38,6 +38,7 @@ aliases {
i2c5 = &i2c_5;
i2c6 = &i2c_6;
i2c7 = &i2c_7;
i2c8 = &i2c_8;
csis0 = &csis_0;
csis1 = &csis_1;
fimc0 = &fimc_0;
......@@ -104,6 +105,7 @@ pd_tv: tv-power-domain@10023C20 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023C20 0x20>;
#power-domain-cells = <0>;
power-domains = <&pd_lcd0>;
};
pd_cam: cam-power-domain@10023C00 {
......@@ -554,6 +556,22 @@ i2c_7: i2c@138D0000 {
status = "disabled";
};
i2c_8: i2c@138E0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-hdmiphy-i2c";
reg = <0x138E0000 0x100>;
interrupts = <0 93 0>;
clocks = <&clock CLK_I2C_HDMI>;
clock-names = "i2c";
status = "disabled";
hdmi_i2c_phy: hdmiphy@38 {
compatible = "exynos4210-hdmiphy";
reg = <0x38>;
};
};
spi_0: spi@13920000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13920000 0x100>;
......@@ -663,6 +681,33 @@ fimd: fimd@11c00000 {
status = "disabled";
};
tmu: tmu@100C0000 {
#include "exynos4412-tmu-sensor-conf.dtsi"
};
hdmi: hdmi@12D00000 {
compatible = "samsung,exynos4210-hdmi";
reg = <0x12D00000 0x70000>;
interrupts = <0 92 0>;
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy",
"mout_hdmi";
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
<&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
<&clock CLK_MOUT_HDMI>;
phy = <&hdmi_i2c_phy>;
power-domains = <&pd_tv>;
samsung,syscon-phandle = <&pmu_system_controller>;
status = "disabled";
};
mixer: mixer@12C10000 {
compatible = "samsung,exynos4210-mixer";
interrupts = <0 91 0>;
reg = <0x12C10000 0x2100>, <0x12c00000 0x300>;
power-domains = <&pd_tv>;
status = "disabled";
};
ppmu_dmc0: ppmu_dmc0@106a0000 {
compatible = "samsung,exynos-ppmu";
reg = <0x106a0000 0x2000>;
......
......@@ -426,6 +426,25 @@ fimd@11c00000 {
status = "okay";
};
tmu@100C0000 {
status = "okay";
};
thermal-zones {
cpu_thermal: cpu-thermal {
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
cooling-device = <&cpu0 2 2>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
cooling-device = <&cpu0 4 4>;
};
};
};
};
camera {
pinctrl-names = "default";
pinctrl-0 = <>;
......
......@@ -505,6 +505,63 @@ fimc_3: fimc@11830000 {
assigned-clock-rates = <0>, <160000000>;
};
};
hdmi_en: voltage-regulator-hdmi-5v {
compatible = "regulator-fixed";
regulator-name = "HDMI_5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpe0 1 0>;
enable-active-high;
};
hdmi_ddc: i2c-ddc {
compatible = "i2c-gpio";
gpios = <&gpe4 2 0 &gpe4 3 0>;
i2c-gpio,delay-us = <100>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&i2c_ddc_bus>;
pinctrl-names = "default";
status = "okay";
};
mixer@12C10000 {
status = "okay";
};
hdmi@12D00000 {
hpd-gpio = <&gpx3 7 0>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd>;
hdmi-en-supply = <&hdmi_en>;
vdd-supply = <&ldo3_reg>;
vdd_osc-supply = <&ldo4_reg>;
vdd_pll-supply = <&ldo3_reg>;
ddc = <&hdmi_ddc>;
status = "okay";
};
i2c@138E0000 {
status = "okay";
};
};
&pinctrl_1 {
hdmi_hpd: hdmi-hpd {
samsung,pins = "gpx3-7";
samsung,pin-pud = <0>;
};
};
&pinctrl_0 {
i2c_ddc_bus: i2c-ddc-bus {
samsung,pins = "gpe4-2", "gpe4-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
};
&mdma1 {
......
......@@ -21,6 +21,7 @@
#include "exynos4.dtsi"
#include "exynos4210-pinctrl.dtsi"
#include "exynos4-cpu-thermal.dtsi"
/ {
compatible = "samsung,exynos4210", "samsung,exynos4";
......@@ -35,10 +36,13 @@ cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@900 {
cpu0: cpu@900 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0x900>;
cooling-min-level = <4>;
cooling-max-level = <2>;
#cooling-cells = <2>; /* min followed by max */
};
cpu@901 {
......@@ -153,16 +157,38 @@ pinctrl_2: pinctrl@03860000 {
reg = <0x03860000 0x1000>;
};
tmu@100C0000 {
tmu: tmu@100C0000 {
compatible = "samsung,exynos4210-tmu";
interrupt-parent = <&combiner>;
reg = <0x100C0000 0x100>;
interrupts = <2 4>;
clocks = <&clock CLK_TMU_APBIF>;
clock-names = "tmu_apbif";
samsung,tmu_gain = <15>;
samsung,tmu_reference_voltage = <7>;
status = "disabled";
};
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tmu 0>;
trips {
cpu_alert0: cpu-alert-0 {
temperature = <85000>; /* millicelsius */
};
cpu_alert1: cpu-alert-1 {
temperature = <100000>; /* millicelsius */
};
cpu_alert2: cpu-alert-2 {
temperature = <110000>; /* millicelsius */
};
};
};
};
g2d@12800000 {
compatible = "samsung,s5pv210-g2d";
reg = <0x12800000 0x1000>;
......@@ -203,6 +229,14 @@ fimc_3: fimc@11830000 {
};
};
mixer: mixer@12C10000 {
clock-names = "mixer", "hdmi", "sclk_hdmi", "vp", "mout_mixer",
"sclk_mixer";
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>, <&clock CLK_VP>,
<&clock CLK_MOUT_MIXER>, <&clock CLK_SCLK_MIXER>;
};
ppmu_lcd1: ppmu_lcd1@12240000 {
compatible = "samsung,exynos-ppmu";
reg = <0x12240000 0x2000>;
......
......@@ -26,10 +26,13 @@ cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@A00 {
cpu0: cpu@A00 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA00>;
cooling-min-level = <13>;
cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
};
cpu@A01 {
......
......@@ -249,6 +249,20 @@ ldo7_reg: LDO7 {
regulator-always-on;
};
ldo8_reg: ldo@8 {
regulator-compatible = "LDO8";
regulator-name = "VDD10_HDMI_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
ldo10_reg: ldo@10 {
regulator-compatible = "LDO10";
regulator-name = "VDDQ_MIPIHSI_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo11_reg: LDO11 {
regulator-name = "VDD18_ABB1_1.8V";
regulator-min-microvolt = <1800000>;
......@@ -411,6 +425,51 @@ hsotg@12480000 {
ehci: ehci@12580000 {
status = "okay";
};
tmu@100C0000 {
vtmu-supply = <&ldo10_reg>;
status = "okay";
};
thermal-zones {
cpu_thermal: cpu-thermal {
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
cooling-device = <&cpu0 7 7>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
cooling-device = <&cpu0 13 13>;
};
};
};
};
mixer: mixer@12C10000 {
status = "okay";
};
hdmi@12D00000 {
hpd-gpio = <&gpx3 7 0>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd>;
vdd-supply = <&ldo8_reg>;
vdd_osc-supply = <&ldo10_reg>;
vdd_pll-supply = <&ldo8_reg>;
ddc = <&hdmi_ddc>;
status = "okay";
};
hdmi_ddc: i2c@13880000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c2_bus>;
};
i2c@138E0000 {
status = "okay";
};
};
&pinctrl_1 {
......@@ -425,4 +484,9 @@ max77686_irq: max77686-irq {
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
hdmi_hpd: hdmi-hpd {
samsung,pins = "gpx3-7";
samsung,pin-pud = <1>;
};
};
/*
* Device tree sources for Exynos4412 TMU sensor configuration
*
* Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <dt-bindings/thermal/thermal_exynos.h>
#thermal-sensor-cells = <0>;
samsung,tmu_gain = <8>;
samsung,tmu_reference_voltage = <16>;
samsung,tmu_noise_cancel_mode = <4>;
samsung,tmu_efuse_value = <55>;
samsung,tmu_min_efuse_value = <40>;
samsung,tmu_max_efuse_value = <100>;
samsung,tmu_first_point_trim = <25>;
samsung,tmu_second_point_trim = <85>;
samsung,tmu_default_temp_offset = <50>;
samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
......@@ -927,6 +927,21 @@ thermistor-battery@1 {
pulldown-ohm = <100000>; /* 100K */
io-channels = <&adc 2>; /* Battery temperature */
};
thermal-zones {
cpu_thermal: cpu-thermal {
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
cooling-device = <&cpu0 7 7>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
cooling-device = <&cpu0 13 13>;
};
};
};
};
};
&pmu_system_controller {
......
......@@ -26,10 +26,13 @@ cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@A00 {
cpu0: cpu@A00 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA00>;
cooling-min-level = <13>;
cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
};
cpu@A01 {
......
......@@ -19,6 +19,7 @@
#include "exynos4.dtsi"
#include "exynos4x12-pinctrl.dtsi"
#include "exynos4-cpu-thermal.dtsi"
/ {
aliases {
......@@ -297,4 +298,15 @@ tmu@100C0000 {
clock-names = "tmu_apbif";
status = "disabled";
};
hdmi: hdmi@12D00000 {
compatible = "samsung,exynos4212-hdmi";
};
mixer: mixer@12C10000 {
compatible = "samsung,exynos4212-mixer";
clock-names = "mixer", "hdmi", "sclk_hdmi", "vp";
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>, <&clock CLK_VP>;
};
};
......@@ -20,7 +20,7 @@
#include <dt-bindings/clock/exynos5250.h>
#include "exynos5.dtsi"
#include "exynos5250-pinctrl.dtsi"
#include "exynos4-cpu-thermal.dtsi"
#include <dt-bindings/clock/exynos-audss-clk.h>
/ {
......@@ -58,11 +58,14 @@ cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0>;
clock-frequency = <1700000000>;
cooling-min-level = <15>;
cooling-max-level = <9>;
#cooling-cells = <2>; /* min followed by max */
};
cpu@1 {
device_type = "cpu";
......@@ -102,6 +105,12 @@ pd_mfc: mfc-power-domain@10044040 {
#power-domain-cells = <0>;
};
pd_disp1: disp1-power-domain@100440A0 {
compatible = "samsung,exynos4210-pd";
reg = <0x100440A0 0x20>;
#power-domain-cells = <0>;
};
clock: clock-controller@10010000 {
compatible = "samsung,exynos5250-clock";
reg = <0x10010000 0x30000>;
......@@ -235,12 +244,32 @@ rtc: rtc@101E0000 {
status = "disabled";
};
tmu@10060000 {
tmu: tmu@10060000 {
compatible = "samsung,exynos5250-tmu";
reg = <0x10060000 0x100>;
interrupts = <0 65 0>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
};
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tmu 0>;
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
cooling-device = <&cpu0 9 9>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
cooling-device = <&cpu0 15 15>;
};
};
};
};
serial@12C00000 {
......@@ -719,6 +748,7 @@ gsc_3: gsc@13e30000 {
hdmi: hdmi {
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
power-domains = <&pd_disp1>;
interrupts = <0 95 0>;
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
<&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
......@@ -731,9 +761,11 @@ hdmi: hdmi {
mixer {
compatible = "samsung,exynos5250-mixer";
reg = <0x14450000 0x10000>;
power-domains = <&pd_disp1>;
interrupts = <0 94 0>;
clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "sclk_hdmi";
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "hdmi", "sclk_hdmi";
};
dp_phy: video-phy@10040720 {
......@@ -743,6 +775,7 @@ dp_phy: video-phy@10040720 {
};
dp: dp-controller@145B0000 {
power-domains = <&pd_disp1>;
clocks = <&clock CLK_DP>;
clock-names = "dp";
phys = <&dp_phy>;
......@@ -750,6 +783,7 @@ dp: dp-controller@145B0000 {
};
fimd: fimd@14400000 {
power-domains = <&pd_disp1>;
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
};
......
/*
* Device tree sources for default Exynos5420 thermal zone definition
*
* Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
polling-delay-passive = <0>;
polling-delay = <0>;
trips {
cpu-alert-0 {
temperature = <85000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu-alert-1 {
temperature = <103000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu-alert-2 {
temperature = <110000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu-crit-0 {
temperature = <1200000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
};
};
......@@ -740,8 +740,9 @@ mixer: mixer@14450000 {
compatible = "samsung,exynos5420-mixer";
reg = <0x14450000 0x10000>;
interrupts = <0 94 0>;
clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "sclk_hdmi";
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "hdmi", "sclk_hdmi";
power-domains = <&disp_pd>;
};
......@@ -782,6 +783,7 @@ tmu_cpu0: tmu@10060000 {
interrupts = <0 65 0>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
};
tmu_cpu1: tmu@10064000 {
......@@ -790,6 +792,7 @@ tmu_cpu1: tmu@10064000 {
interrupts = <0 183 0>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
};
tmu_cpu2: tmu@10068000 {
......@@ -798,6 +801,7 @@ tmu_cpu2: tmu@10068000 {
interrupts = <0 184 0>;
clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
};
tmu_cpu3: tmu@1006c000 {
......@@ -806,6 +810,7 @@ tmu_cpu3: tmu@1006c000 {
interrupts = <0 185 0>;
clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
};
tmu_gpu: tmu@100a0000 {
......@@ -814,6 +819,30 @@ tmu_gpu: tmu@100a0000 {
interrupts = <0 215 0>;
clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
};
thermal-zones {
cpu0_thermal: cpu0-thermal {
thermal-sensors = <&tmu_cpu0>;
#include "exynos5420-trip-points.dtsi"
};
cpu1_thermal: cpu1-thermal {
thermal-sensors = <&tmu_cpu1>;
#include "exynos5420-trip-points.dtsi"
};
cpu2_thermal: cpu2-thermal {
thermal-sensors = <&tmu_cpu2>;
#include "exynos5420-trip-points.dtsi"
};
cpu3_thermal: cpu3-thermal {
thermal-sensors = <&tmu_cpu3>;
#include "exynos5420-trip-points.dtsi"
};
gpu_thermal: gpu-thermal {
thermal-sensors = <&tmu_gpu>;
#include "exynos5420-trip-points.dtsi"
};
};
watchdog: watchdog@101D0000 {
......
/*
* Device tree sources for Exynos5440 TMU sensor configuration
*
* Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <dt-bindings/thermal/thermal_exynos.h>
#thermal-sensor-cells = <0>;
samsung,tmu_gain = <5>;
samsung,tmu_reference_voltage = <16>;
samsung,tmu_noise_cancel_mode = <4>;
samsung,tmu_efuse_value = <0x5d2d>;
samsung,tmu_min_efuse_value = <16>;
samsung,tmu_max_efuse_value = <76>;
samsung,tmu_first_point_trim = <25>;
samsung,tmu_second_point_trim = <70>;
samsung,tmu_default_temp_offset = <25>;
samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
/*
* Device tree sources for default Exynos5440 thermal zone definition
*
* Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
polling-delay-passive = <0>;
polling-delay = <0>;
trips {
cpu-alert-0 {
temperature = <100000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "active";
};
cpu-crit-0 {
temperature = <1050000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
};
};
......@@ -219,6 +219,7 @@ tmuctrl_0: tmuctrl@160118 {
interrupts = <0 58 0>;
clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
#include "exynos5440-tmu-sensor-conf.dtsi"
};
tmuctrl_1: tmuctrl@16011C {
......@@ -227,6 +228,7 @@ tmuctrl_1: tmuctrl@16011C {
interrupts = <0 58 0>;
clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
#include "exynos5440-tmu-sensor-conf.dtsi"
};
tmuctrl_2: tmuctrl@160120 {
......@@ -235,6 +237,22 @@ tmuctrl_2: tmuctrl@160120 {
interrupts = <0 58 0>;
clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
#include "exynos5440-tmu-sensor-conf.dtsi"
};
thermal-zones {
cpu0_thermal: cpu0-thermal {
thermal-sensors = <&tmuctrl_0>;
#include "exynos5440-trip-points.dtsi"
};
cpu1_thermal: cpu1-thermal {
thermal-sensors = <&tmuctrl_1>;
#include "exynos5440-trip-points.dtsi"
};
cpu2_thermal: cpu2-thermal {
thermal-sensors = <&tmuctrl_2>;
#include "exynos5440-trip-points.dtsi"
};
};
sata@210000 {
......
......@@ -35,6 +35,7 @@ reg_usb_otg_vbus: regulator@0 {
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 0>;
enable-active-high;
vin-supply = <&swbst_reg>;
};
reg_usb_h1_vbus: regulator@1 {
......@@ -45,6 +46,7 @@ reg_usb_h1_vbus: regulator@1 {
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 29 0>;
enable-active-high;
vin-supply = <&swbst_reg>;
};
reg_audio: regulator@2 {
......
......@@ -52,6 +52,7 @@ reg_usb_otg1_vbus: regulator@0 {
regulator-max-microvolt = <5000000>;
gpio = <&gpio4 0 0>;
enable-active-high;
vin-supply = <&swbst_reg>;
};
reg_usb_otg2_vbus: regulator@1 {
......@@ -62,6 +63,7 @@ reg_usb_otg2_vbus: regulator@1 {
regulator-max-microvolt = <5000000>;
gpio = <&gpio4 2 0>;
enable-active-high;
vin-supply = <&swbst_reg>;
};
reg_aud3v: regulator@2 {
......
......@@ -13,7 +13,7 @@
core_thermal: core_thermal {
polling-delay-passive = <250>; /* milliseconds */
polling-delay = <1000>; /* milliseconds */
polling-delay = <500>; /* milliseconds */
/* sensor ID */
thermal-sensors = <&bandgap 2>;
......
......@@ -13,7 +13,7 @@
gpu_thermal: gpu_thermal {
polling-delay-passive = <250>; /* milliseconds */
polling-delay = <1000>; /* milliseconds */
polling-delay = <500>; /* milliseconds */
/* sensor ID */
thermal-sensors = <&bandgap 1>;
......
......@@ -1079,4 +1079,8 @@ abb_mm: regulator-abb-mm {
};
};
&cpu_thermal {
polling-delay = <500>; /* milliseconds */
};
/include/ "omap54xx-clocks.dtsi"
......@@ -167,10 +167,18 @@ dpll_abe_m3x2_ck: dpll_abe_m3x2_ck {
ti,index-starts-at-one;
};
dpll_core_byp_mux: dpll_core_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
ti,bit-shift = <23>;
reg = <0x012c>;
};
dpll_core_ck: dpll_core_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-core-clock";
clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
clocks = <&sys_clkin>, <&dpll_core_byp_mux>;
reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
};
......@@ -294,10 +302,18 @@ iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
clock-div = <1>;
};
dpll_iva_byp_mux: dpll_iva_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x01ac>;
};
dpll_iva_ck: dpll_iva_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
clocks = <&sys_clkin>, <&dpll_iva_byp_mux>;
reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
};
......@@ -599,10 +615,19 @@ timer1_gfclk_mux: timer1_gfclk_mux {
};
};
&cm_core_clocks {
dpll_per_byp_mux: dpll_per_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x014c>;
};
dpll_per_ck: dpll_per_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
clocks = <&sys_clkin>, <&dpll_per_byp_mux>;
reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
};
......@@ -714,10 +739,18 @@ dpll_unipro2_m2_ck: dpll_unipro2_m2_ck {
ti,index-starts-at-one;
};
dpll_usb_byp_mux: dpll_usb_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x018c>;
};
dpll_usb_ck: dpll_usb_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-j-type-clock";
clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
clocks = <&sys_clkin>, <&dpll_usb_byp_mux>;
reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
};
......
......@@ -1248,7 +1248,6 @@ watchdog@fffffe40 {
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};
......@@ -1416,7 +1415,7 @@ usb2: ehci@00700000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ehci_clk", "uhpck";
status = "disabled";
};
......
......@@ -66,6 +66,7 @@ aliases {
gpio4 = &pioE;
tcb0 = &tcb0;
tcb1 = &tcb1;
i2c0 = &i2c0;
i2c2 = &i2c2;
};
cpus {
......@@ -259,7 +260,7 @@ usb2: ehci@00600000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00600000 0x100000>;
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ehci_clk", "uhpck";
status = "disabled";
};
......@@ -461,8 +462,8 @@ ddrck: ddrck {
lcdck: lcdck {
#clock-cells = <0>;
reg = <4>;
clocks = <&smd>;
reg = <3>;
clocks = <&mck>;
};
smdck: smdck {
......@@ -770,7 +771,7 @@ dma1_clk: dma1_clk {
reg = <50>;
};
lcd_clk: lcd_clk {
lcdc_clk: lcdc_clk {
#clock-cells = <0>;
reg = <51>;
};
......
......@@ -713,6 +713,9 @@ uart0: serial0@ffc02000 {
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&l4_sp_clk>;
dmas = <&pdma 28>,
<&pdma 29>;
dma-names = "tx", "rx";
};
uart1: serial1@ffc03000 {
......@@ -722,6 +725,9 @@ uart1: serial1@ffc03000 {
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&l4_sp_clk>;
dmas = <&pdma 30>,
<&pdma 31>;
dma-names = "tx", "rx";
};
rst: rstmgr@ffd05000 {
......
......@@ -70,6 +70,7 @@ CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_ARM_AT91_ETHER=y
CONFIG_MACB=y
# CONFIG_NET_VENDOR_BROADCOM is not set
CONFIG_DM9000=y
......
......@@ -99,7 +99,7 @@ CONFIG_PCI_RCAR_GEN2=y
CONFIG_PCI_RCAR_GEN2_PCIE=y
CONFIG_PCIEPORTBUS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=8
CONFIG_NR_CPUS=16
CONFIG_HIGHPTE=y
CONFIG_CMA=y
CONFIG_ARM_APPENDED_DTB=y
......
......@@ -377,6 +377,7 @@ CONFIG_PWM_TWL=m
CONFIG_PWM_TWL_LED=m
CONFIG_OMAP_USB2=m
CONFIG_TI_PIPE3=y
CONFIG_TWL4030_USB=m
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
......
......@@ -3,8 +3,6 @@
CONFIG_SYSVIPC=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
......
......@@ -4,6 +4,7 @@ CONFIG_BLK_DEV_INITRD=y
CONFIG_PERF_EVENTS=y
CONFIG_ARCH_SUNXI=y
CONFIG_SMP=y
CONFIG_NR_CPUS=8
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
......
......@@ -118,8 +118,8 @@ CONFIG_HID_ZEROPLUS=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_MON=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_ISP1760=y
CONFIG_MMC=y
CONFIG_MMC_ARMMMCI=y
CONFIG_NEW_LEDS=y
......
......@@ -18,8 +18,11 @@
#define AT91_DBGU 0xfc00c000 /* SAMA5D4_BASE_USART3 */
#endif
/* Keep in sync with mach-at91/include/mach/hardware.h */
#ifdef CONFIG_MMU
#define AT91_IO_P2V(x) ((x) - 0x01000000)
#else
#define AT91_IO_P2V(x) (x)
#endif
#define AT91_DBGU_SR (0x14) /* Status Register */
#define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */
......
......@@ -270,37 +270,35 @@ static void __init at91_pm_sram_init(void)
phys_addr_t sram_pbase;
unsigned long sram_base;
struct device_node *node;
struct platform_device *pdev;
struct platform_device *pdev = NULL;
node = of_find_compatible_node(NULL, NULL, "mmio-sram");
if (!node) {
pr_warn("%s: failed to find sram node!\n", __func__);
return;
for_each_compatible_node(node, NULL, "mmio-sram") {
pdev = of_find_device_by_node(node);
if (pdev) {
of_node_put(node);
break;
}
}
pdev = of_find_device_by_node(node);
if (!pdev) {
pr_warn("%s: failed to find sram device!\n", __func__);
goto put_node;
return;
}
sram_pool = dev_get_gen_pool(&pdev->dev);
if (!sram_pool) {
pr_warn("%s: sram pool unavailable!\n", __func__);
goto put_node;
return;
}
sram_base = gen_pool_alloc(sram_pool, at91_slow_clock_sz);
if (!sram_base) {
pr_warn("%s: unable to alloc ocram!\n", __func__);
goto put_node;
return;
}
sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
slow_clock = __arm_ioremap_exec(sram_pbase, at91_slow_clock_sz, false);
put_node:
of_node_put(node);
}
#endif
......
......@@ -44,7 +44,7 @@ static inline void at91rm9200_standby(void)
" mcr p15, 0, %0, c7, c0, 4\n\t"
" str %5, [%1, %2]"
:
: "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR),
: "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR),
"r" (1), "r" (AT91RM9200_SDRAMC_SRR),
"r" (lpr));
}
......
......@@ -25,11 +25,6 @@
*/
#undef SLOWDOWN_MASTER_CLOCK
#define MCKRDY_TIMEOUT 1000
#define MOSCRDY_TIMEOUT 1000
#define PLLALOCK_TIMEOUT 1000
#define PLLBLOCK_TIMEOUT 1000
pmc .req r0
sdramc .req r1
ramc1 .req r2
......@@ -41,60 +36,42 @@ tmp2 .req r5
* Wait until master clock is ready (after switching master clock source)
*/
.macro wait_mckrdy
mov tmp2, #MCKRDY_TIMEOUT
1: sub tmp2, tmp2, #1
cmp tmp2, #0
beq 2f
ldr tmp1, [pmc, #AT91_PMC_SR]
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_MCKRDY
beq 1b
2:
.endm
/*
* Wait until master oscillator has stabilized.
*/
.macro wait_moscrdy
mov tmp2, #MOSCRDY_TIMEOUT
1: sub tmp2, tmp2, #1
cmp tmp2, #0
beq 2f
ldr tmp1, [pmc, #AT91_PMC_SR]
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_MOSCS
beq 1b
2:
.endm
/*
* Wait until PLLA has locked.
*/
.macro wait_pllalock
mov tmp2, #PLLALOCK_TIMEOUT
1: sub tmp2, tmp2, #1
cmp tmp2, #0
beq 2f
ldr tmp1, [pmc, #AT91_PMC_SR]
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_LOCKA
beq 1b
2:
.endm
/*
* Wait until PLLB has locked.
*/
.macro wait_pllblock
mov tmp2, #PLLBLOCK_TIMEOUT
1: sub tmp2, tmp2, #1
cmp tmp2, #0
beq 2f
ldr tmp1, [pmc, #AT91_PMC_SR]
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_LOCKB
beq 1b
2:
.endm
.text
.arm
/* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc,
* void __iomem *ramc1, int memctrl)
*/
......@@ -134,6 +111,16 @@ ddr_sr_enable:
cmp memctrl, #AT91_MEMCTRL_DDRSDR
bne sdr_sr_enable
/* LPDDR1 --> force DDR2 mode during self-refresh */
ldr tmp1, [sdramc, #AT91_DDRSDRC_MDR]
str tmp1, .saved_sam9_mdr
bic tmp1, tmp1, #~AT91_DDRSDRC_MD
cmp tmp1, #AT91_DDRSDRC_MD_LOW_POWER_DDR
ldreq tmp1, [sdramc, #AT91_DDRSDRC_MDR]
biceq tmp1, tmp1, #AT91_DDRSDRC_MD
orreq tmp1, tmp1, #AT91_DDRSDRC_MD_DDR2
streq tmp1, [sdramc, #AT91_DDRSDRC_MDR]
/* prepare for DDRAM self-refresh mode */
ldr tmp1, [sdramc, #AT91_DDRSDRC_LPR]
str tmp1, .saved_sam9_lpr
......@@ -142,14 +129,26 @@ ddr_sr_enable:
/* figure out if we use the second ram controller */
cmp ramc1, #0
ldrne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
strne tmp2, .saved_sam9_lpr1
bicne tmp2, #AT91_DDRSDRC_LPCB
orrne tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
beq ddr_no_2nd_ctrl
ldr tmp2, [ramc1, #AT91_DDRSDRC_MDR]
str tmp2, .saved_sam9_mdr1
bic tmp2, tmp2, #~AT91_DDRSDRC_MD
cmp tmp2, #AT91_DDRSDRC_MD_LOW_POWER_DDR
ldreq tmp2, [ramc1, #AT91_DDRSDRC_MDR]
biceq tmp2, tmp2, #AT91_DDRSDRC_MD
orreq tmp2, tmp2, #AT91_DDRSDRC_MD_DDR2
streq tmp2, [ramc1, #AT91_DDRSDRC_MDR]
ldr tmp2, [ramc1, #AT91_DDRSDRC_LPR]
str tmp2, .saved_sam9_lpr1
bic tmp2, #AT91_DDRSDRC_LPCB
orr tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
/* Enable DDRAM self-refresh mode */
str tmp2, [ramc1, #AT91_DDRSDRC_LPR]
ddr_no_2nd_ctrl:
str tmp1, [sdramc, #AT91_DDRSDRC_LPR]
strne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
b sdr_sr_done
......@@ -208,6 +207,7 @@ sdr_sr_done:
/* Turn off the main oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR]
bic tmp1, tmp1, #AT91_PMC_MOSCEN
orr tmp1, tmp1, #AT91_PMC_KEY
str tmp1, [pmc, #AT91_CKGR_MOR]
/* Wait for interrupt */
......@@ -216,6 +216,7 @@ sdr_sr_done:
/* Turn on the main oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR]
orr tmp1, tmp1, #AT91_PMC_MOSCEN
orr tmp1, tmp1, #AT91_PMC_KEY
str tmp1, [pmc, #AT91_CKGR_MOR]
wait_moscrdy
......@@ -280,12 +281,17 @@ sdr_sr_done:
*/
cmp memctrl, #AT91_MEMCTRL_DDRSDR
bne sdr_en_restore
/* Restore MDR in case of LPDDR1 */
ldr tmp1, .saved_sam9_mdr
str tmp1, [sdramc, #AT91_DDRSDRC_MDR]
/* Restore LPR on AT91 with DDRAM */
ldr tmp1, .saved_sam9_lpr
str tmp1, [sdramc, #AT91_DDRSDRC_LPR]
/* if we use the second ram controller */
cmp ramc1, #0
ldrne tmp2, .saved_sam9_mdr1
strne tmp2, [ramc1, #AT91_DDRSDRC_MDR]
ldrne tmp2, .saved_sam9_lpr1
strne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
......@@ -319,5 +325,11 @@ ram_restored:
.saved_sam9_lpr1:
.word 0
.saved_sam9_mdr:
.word 0
.saved_sam9_mdr1:
.word 0
ENTRY(at91_slow_clock_sz)
.word .-at91_slow_clock
......@@ -126,8 +126,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
*/
void exynos_cpu_power_down(int cpu)
{
if (cpu == 0 && (of_machine_is_compatible("samsung,exynos5420") ||
of_machine_is_compatible("samsung,exynos5800"))) {
if (cpu == 0 && (soc_is_exynos5420() || soc_is_exynos5800())) {
/*
* Bypass power down for CPU0 during suspend. Check for
* the SYS_PWR_REG value to decide if we are suspending
......
......@@ -161,6 +161,34 @@ static __init int exynos4_pm_init_power_domain(void)
of_genpd_add_provider_simple(np, &pd->pd);
}
/* Assign the child power domains to their parents */
for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") {
struct generic_pm_domain *child_domain, *parent_domain;
struct of_phandle_args args;
args.np = np;
args.args_count = 0;
child_domain = of_genpd_get_from_provider(&args);
if (!child_domain)
continue;
if (of_parse_phandle_with_args(np, "power-domains",
"#power-domain-cells", 0, &args) != 0)
continue;
parent_domain = of_genpd_get_from_provider(&args);
if (!parent_domain)
continue;
if (pm_genpd_add_subdomain(parent_domain, child_domain))
pr_warn("%s failed to add subdomain: %s\n",
parent_domain->name, child_domain->name);
else
pr_info("%s has as child subdomain: %s.\n",
parent_domain->name, child_domain->name);
of_node_put(np);
}
return 0;
}
arch_initcall(exynos4_pm_init_power_domain);
......@@ -87,8 +87,8 @@ static unsigned int exynos_pmu_spare3;
static u32 exynos_irqwake_intmask = 0xffffffff;
static const struct exynos_wkup_irq exynos3250_wkup_irq[] = {
{ 73, BIT(1) }, /* RTC alarm */
{ 74, BIT(2) }, /* RTC tick */
{ 105, BIT(1) }, /* RTC alarm */
{ 106, BIT(2) }, /* RTC tick */
{ /* sentinel */ },
};
......
......@@ -1692,15 +1692,14 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
if (ret == -EBUSY)
pr_warn("omap_hwmod: %s: failed to hardreset\n", oh->name);
if (!ret) {
if (oh->clkdm) {
/*
* Set the clockdomain to HW_AUTO, assuming that the
* previous state was HW_AUTO.
*/
if (oh->clkdm && hwsup)
if (hwsup)
clkdm_allow_idle(oh->clkdm);
} else {
if (oh->clkdm)
clkdm_hwmod_disable(oh->clkdm, oh);
}
......@@ -2698,6 +2697,7 @@ static int __init _register(struct omap_hwmod *oh)
INIT_LIST_HEAD(&oh->master_ports);
INIT_LIST_HEAD(&oh->slave_ports);
spin_lock_init(&oh->_lock);
lockdep_set_class(&oh->_lock, &oh->hwmod_key);
oh->_state = _HWMOD_STATE_REGISTERED;
......
......@@ -674,6 +674,7 @@ struct omap_hwmod {
u32 _sysc_cache;
void __iomem *_mpu_rt_va;
spinlock_t _lock;
struct lock_class_key hwmod_key; /* unique lock class */
struct list_head node;
struct omap_hwmod_ocp_if *_mpu_port;
unsigned int (*xlate_irq)(unsigned int);
......
......@@ -1466,68 +1466,31 @@ static struct omap_hwmod dra7xx_ocp2scp3_hwmod = {
*
*/
static struct omap_hwmod_class dra7xx_pcie_hwmod_class = {
static struct omap_hwmod_class dra7xx_pciess_hwmod_class = {
.name = "pcie",
};
/* pcie1 */
static struct omap_hwmod dra7xx_pcie1_hwmod = {
static struct omap_hwmod dra7xx_pciess1_hwmod = {
.name = "pcie1",
.class = &dra7xx_pcie_hwmod_class,
.class = &dra7xx_pciess_hwmod_class,
.clkdm_name = "pcie_clkdm",
.main_clk = "l4_root_clk_div",
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET,
.clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL_OFFSET,
.context_offs = DRA7XX_RM_L3INIT_PCIESS1_CONTEXT_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},
},
};
/* pcie2 */
static struct omap_hwmod dra7xx_pcie2_hwmod = {
static struct omap_hwmod dra7xx_pciess2_hwmod = {
.name = "pcie2",
.class = &dra7xx_pcie_hwmod_class,
.class = &dra7xx_pciess_hwmod_class,
.clkdm_name = "pcie_clkdm",
.main_clk = "l4_root_clk_div",
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},
},
};
/*
* 'PCIE PHY' class
*
*/
static struct omap_hwmod_class dra7xx_pcie_phy_hwmod_class = {
.name = "pcie-phy",
};
/* pcie1 phy */
static struct omap_hwmod dra7xx_pcie1_phy_hwmod = {
.name = "pcie1-phy",
.class = &dra7xx_pcie_phy_hwmod_class,
.clkdm_name = "l3init_clkdm",
.main_clk = "l4_root_clk_div",
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL_OFFSET,
.context_offs = DRA7XX_RM_L3INIT_PCIESS1_CONTEXT_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},
},
};
/* pcie2 phy */
static struct omap_hwmod dra7xx_pcie2_phy_hwmod = {
.name = "pcie2-phy",
.class = &dra7xx_pcie_phy_hwmod_class,
.clkdm_name = "l3init_clkdm",
.main_clk = "l4_root_clk_div",
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS2_CLKCTRL_OFFSET,
......@@ -2877,50 +2840,34 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp3 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l3_main_1 -> pcie1 */
static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pcie1 = {
/* l3_main_1 -> pciess1 */
static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess1 = {
.master = &dra7xx_l3_main_1_hwmod,
.slave = &dra7xx_pcie1_hwmod,
.slave = &dra7xx_pciess1_hwmod,
.clk = "l3_iclk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_cfg -> pcie1 */
static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie1 = {
/* l4_cfg -> pciess1 */
static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess1 = {
.master = &dra7xx_l4_cfg_hwmod,
.slave = &dra7xx_pcie1_hwmod,
.slave = &dra7xx_pciess1_hwmod,
.clk = "l4_root_clk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l3_main_1 -> pcie2 */
static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pcie2 = {
/* l3_main_1 -> pciess2 */
static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess2 = {
.master = &dra7xx_l3_main_1_hwmod,
.slave = &dra7xx_pcie2_hwmod,
.slave = &dra7xx_pciess2_hwmod,
.clk = "l3_iclk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_cfg -> pcie2 */
static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie2 = {
.master = &dra7xx_l4_cfg_hwmod,
.slave = &dra7xx_pcie2_hwmod,
.clk = "l4_root_clk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_cfg -> pcie1 phy */
static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie1_phy = {
.master = &dra7xx_l4_cfg_hwmod,
.slave = &dra7xx_pcie1_phy_hwmod,
.clk = "l4_root_clk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_cfg -> pcie2 phy */
static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie2_phy = {
/* l4_cfg -> pciess2 */
static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess2 = {
.master = &dra7xx_l4_cfg_hwmod,
.slave = &dra7xx_pcie2_phy_hwmod,
.slave = &dra7xx_pciess2_hwmod,
.clk = "l4_root_clk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
......@@ -3327,12 +3274,10 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
&dra7xx_l4_cfg__mpu,
&dra7xx_l4_cfg__ocp2scp1,
&dra7xx_l4_cfg__ocp2scp3,
&dra7xx_l3_main_1__pcie1,
&dra7xx_l4_cfg__pcie1,
&dra7xx_l3_main_1__pcie2,
&dra7xx_l4_cfg__pcie2,
&dra7xx_l4_cfg__pcie1_phy,
&dra7xx_l4_cfg__pcie2_phy,
&dra7xx_l3_main_1__pciess1,
&dra7xx_l4_cfg__pciess1,
&dra7xx_l3_main_1__pciess2,
&dra7xx_l4_cfg__pciess2,
&dra7xx_l3_main_1__qspi,
&dra7xx_l4_per3__rtcss,
&dra7xx_l4_cfg__sata,
......
......@@ -173,6 +173,7 @@ static void __init omap3_igep0030_rev_g_legacy_init(void)
static void __init omap3_evm_legacy_init(void)
{
hsmmc2_internal_input_clk();
legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 149);
}
......
......@@ -252,10 +252,10 @@ static void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask)
{
saved_mask[0] =
omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
OMAP4_PRM_IRQSTATUS_MPU_OFFSET);
OMAP4_PRM_IRQENABLE_MPU_OFFSET);
saved_mask[1] =
omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET);
OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST,
OMAP4_PRM_IRQENABLE_MPU_OFFSET);
......
......@@ -45,6 +45,6 @@ extern char secondary_trampoline, secondary_trampoline_end;
extern unsigned long socfpga_cpu1start_addr;
#define SOCFPGA_SCU_VIRT_BASE 0xfffec000
#define SOCFPGA_SCU_VIRT_BASE 0xfee00000
#endif
......@@ -23,6 +23,7 @@
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/cacheflush.h>
#include "core.h"
......@@ -73,6 +74,10 @@ void __init socfpga_sysmgr_init(void)
(u32 *) &socfpga_cpu1start_addr))
pr_err("SMP: Need cpu1-start-addr in device tree.\n");
/* Ensure that socfpga_cpu1start_addr is visible to other CPUs */
smp_wmb();
sync_cache_w(&socfpga_cpu1start_addr);
sys_manager_base_addr = of_iomap(np, 0);
np = of_find_compatible_node(NULL, NULL, "altr,rst-mgr");
......
......@@ -18,6 +18,7 @@ static const char *stih41x_dt_match[] __initdata = {
"st,stih415",
"st,stih416",
"st,stih407",
"st,stih410",
"st,stih418",
NULL
};
......
......@@ -13,7 +13,8 @@
#define PULL_DISABLE (1 << 3)
#define INPUT_EN (1 << 5)
#define SLEWCTRL_FAST (1 << 6)
#define SLEWCTRL_SLOW (1 << 6)
#define SLEWCTRL_FAST 0
/* update macro depending on INPUT_EN and PULL_ENA */
#undef PIN_OUTPUT
......
......@@ -18,7 +18,8 @@
#define PULL_DISABLE (1 << 16)
#define PULL_UP (1 << 17)
#define INPUT_EN (1 << 18)
#define SLEWCTRL_FAST (1 << 19)
#define SLEWCTRL_SLOW (1 << 19)
#define SLEWCTRL_FAST 0
#define DS0_PULL_UP_DOWN_EN (1 << 27)
#define PIN_OUTPUT (PULL_DISABLE)
......
......@@ -92,7 +92,7 @@
#define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */
#define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */
#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */
#define AT91_DDRSDRC_MD (7 << 0) /* Memory Device Type */
#define AT91_DDRSDRC_MD_SDR 0
#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1
#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment