Commit 69a462b9 authored by Mars Cheng's avatar Mars Cheng Committed by Matthias Brugger

Document: DT: Add bindings for mediatek MT6580 SoC Platform

This adds a DT binding documentation for the MT6580 SoC from Mediatek.
Signed-off-by: default avatarMars Cheng <mars.cheng@mediatek.com>
Signed-off-by: default avatarMatthias Brugger <matthias.bgg@gmail.com>
parent d57b1d28
......@@ -5,6 +5,7 @@ Boards with a MediaTek mt65xx/mt81xx SoC shall have the following property:
Required root node property:
compatible: Must contain one of
"mediatek,mt6580"
"mediatek,mt6589"
"mediatek,mt6592"
"mediatek,mt8127"
......@@ -14,6 +15,9 @@ compatible: Must contain one of
Supported boards:
- Evaluation board for MT6580:
Required root node properties:
- compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580";
- bq Aquaris5 smart phone:
Required root node properties:
- compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589";
......
......@@ -11,6 +11,7 @@ Required properties:
"mediatek,mt6592-sysirq"
"mediatek,mt6589-sysirq"
"mediatek,mt6582-sysirq"
"mediatek,mt6580-sysirq"
"mediatek,mt6577-sysirq"
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Use the same format as specified by GIC in
......
......@@ -7,8 +7,9 @@ Required properties:
* "mediatek,mt8173-uart" for MT8173 compatible UARTS
* "mediatek,mt6589-uart" for MT6589 compatible UARTS
* "mediatek,mt6582-uart" for MT6582 compatible UARTS
* "mediatek,mt6580-uart" for MT6580 compatible UARTS
* "mediatek,mt6577-uart" for all compatible UARTS (MT8173, MT6589, MT6582,
MT6577)
MT6580, MT6577)
- reg: The base address of the UART register bank.
......
......@@ -2,7 +2,11 @@ Mediatek MT6577, MT6572 and MT6589 Timers
---------------------------------------
Required properties:
- compatible: Should be "mediatek,mt6577-timer"
- compatible should contain:
* "mediatek,mt6589-timer" for MT6589 compatible timers
* "mediatek,mt6580-timer" for MT6580 compatible timers
* "mediatek,mt6577-timer" for all compatible timers (MT6589, MT6580,
MT6577)
- reg: Should contain location and length for timers register.
- clocks: Clocks driving the timer hardware. This list should include two
clocks. The order is system clock and as second clock the RTC clock.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment