Commit 69c1fd97 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

Pull trivial tree updates from Jiri Kosina:
 "My attempt to revitalize trivial queue I've been neglecting for years
  (what a disaster that was for this world, right? :) ) with patches
  collected from backlog that were still relevant and not applied
  elsewhere in the meantime"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  err.h: remove deprecated PTR_RET for good
  blk-mq: Fix typo in comment
  x86/boot: Fix comment spelling
  sh: mach-highlander: Fix comment spelling
  s390/dasd: Fix comment spelling
  mfd: wm8994: Fix comment spelling
  docs: Add reference in binfmt-misc.rst
  genirq: fix kerneldoc comment for irq_desc
  drm/amdgpu: fix two documentation mismatch issues
  HID: fix Kconfig word ordering
  list/hashtable: minor documentation corrections.
parents 72f35423 fad7c902
......@@ -140,8 +140,8 @@ Hints
-----
If you want to pass special arguments to your interpreter, you can
write a wrapper script for it. See Documentation/admin-guide/java.rst for an
example.
write a wrapper script for it.
See :doc:`Documentation/admin-guide/java.rst <./java>` for an example.
Your interpreter should NOT look in the PATH for the filename; the kernel
passes it the full filename (or the file descriptor) to use. Using ``$PATH`` can
......
......@@ -18,7 +18,7 @@
#define PA_IRLPRI4 (PA_BCR+0x000a) /* Interrupt Priorty 4 */
#define PA_RSTCTL (PA_BCR+0x000c) /* Reset Control */
#define PA_PCIBD (PA_BCR+0x000e) /* PCI Board detect control */
#define PA_PCICD (PA_BCR+0x0010) /* PCI Conector detect control */
#define PA_PCICD (PA_BCR+0x0010) /* PCI Connector detect control */
#define PA_EXTGIO (PA_BCR+0x0016) /* Extension GPIO Control */
#define PA_IVDRMON (PA_BCR+0x0018) /* iVDR Moniter control */
#define PA_IVDRCTL (PA_BCR+0x001a) /* iVDR control */
......@@ -80,7 +80,7 @@
#define PA_SDPOW (PA_BCR+0x0004) /* SD Power control */
#define PA_RSTCTL (PA_BCR+0x0006) /* Device Reset control */
#define PA_PCIBD (PA_BCR+0x0008) /* PCI Board detect control */
#define PA_PCICD (PA_BCR+0x000a) /* PCI Conector detect control */
#define PA_PCICD (PA_BCR+0x000a) /* PCI Connector detect control */
#define PA_ZIGIO1 (PA_BCR+0x000c) /* Zigbee IO control 1 */
#define PA_ZIGIO2 (PA_BCR+0x000e) /* Zigbee IO control 2 */
#define PA_ZIGIO3 (PA_BCR+0x0010) /* Zigbee IO control 3 */
......
......@@ -60,7 +60,7 @@ int query_apm_bios(void)
intcall(0x15, &ireg, &oreg);
if ((oreg.eflags & X86_EFLAGS_CF) || oreg.bx != 0x504d) {
/* Failure with 32-bit connect, try to disconect and ignore */
/* Failure with 32-bit connect, try to disconnect and ignore */
ireg.al = 0x04;
intcall(0x15, &ireg, NULL);
return -1;
......
......@@ -16,7 +16,7 @@
* @first_vec: first interrupt vectors to use for queues (usually 0)
*
* This function assumes the virtio device @vdev has at least as many available
* interrupt vetors as @set has queues. It will then queuery the vector
* interrupt vectors as @set has queues. It will then query the vector
* corresponding to each queue for it's affinity mask and built queue mapping
* that maps a queue to the CPUs that have irq affinity for the corresponding
* vector.
......
......@@ -677,7 +677,7 @@ static uint64_t sdma_v4_0_ring_get_wptr(struct amdgpu_ring *ring)
}
/**
* sdma_v4_0_ring_set_wptr - commit the write pointer
* sdma_v4_0_page_ring_set_wptr - commit the write pointer
*
* @ring: amdgpu ring pointer
*
......@@ -977,7 +977,7 @@ static void sdma_v4_0_page_stop(struct amdgpu_device *adev)
}
/**
* sdma_v_0_ctx_switch_enable - stop the async dma engines context switch
* sdma_v4_0_ctx_switch_enable - stop the async dma engines context switch
*
* @adev: amdgpu_device pointer
* @enable: enable/disable the DMA MEs context switch.
......
......@@ -1039,7 +1039,7 @@ config HID_U2FZERO
U2F Zero only supports blinking its LED, so this driver doesn't
allow setting the brightness to anything but 1, which will
trigger a single blink and immediately reset to back 0.
trigger a single blink and immediately reset back to 0.
config HID_WACOM
tristate "Wacom Intuos/Graphire tablet support (USB)"
......
......@@ -1987,7 +1987,7 @@ dasd_3990_erp_compound_code(struct dasd_ccw_req * erp, char *sense)
* DASD_3990_ERP_COMPOUND_CONFIG
*
* DESCRIPTION
* Handles the compound ERP action for configruation
* Handles the compound ERP action for configuration
* dependent error.
* Note: duplex handling is not implemented (yet).
*
......
......@@ -62,9 +62,6 @@ static inline int __must_check PTR_ERR_OR_ZERO(__force const void *ptr)
return 0;
}
/* Deprecated */
#define PTR_RET(p) PTR_ERR_OR_ZERO(p)
#endif
#endif /* _LINUX_ERR_H */
......@@ -145,7 +145,7 @@ static inline void hash_del_rcu(struct hlist_node *node)
* hash entry
* @name: hashtable to iterate
* @bkt: integer to use as bucket loop cursor
* @tmp: a &struct used for temporary storage
* @tmp: a &struct hlist_node used for temporary storage
* @obj: the type * to use as a loop cursor for each entry
* @member: the name of the hlist_node within the struct
*/
......@@ -197,7 +197,7 @@ static inline void hash_del_rcu(struct hlist_node *node)
* same bucket safe against removals
* @name: hashtable to iterate
* @obj: the type * to use as a loop cursor for each entry
* @tmp: a &struct used for temporary storage
* @tmp: a &struct hlist_node used for temporary storage
* @member: the name of the hlist_node within the struct
* @key: the key of the objects to iterate over
*/
......
......@@ -24,7 +24,7 @@ struct pt_regs;
* @handle_irq: highlevel irq-events handler
* @preflow_handler: handler called before the flow handler (currently used by sparc)
* @action: the irq action chain
* @status: status information
* @status_use_accessors: status information
* @core_internal_state__do_not_mess_with_it: core internal status information
* @depth: disable-depth, for nested irq_disable() calls
* @wake_depth: enable depth, for multiple irq_set_irq_wake() callers
......
......@@ -989,7 +989,7 @@ static inline void hlist_move_list(struct hlist_head *old,
/**
* hlist_for_each_entry_safe - iterate over list of given type safe against removal of list entry
* @pos: the type * to use as a loop cursor.
* @n: another &struct hlist_node to use as temporary storage
* @n: a &struct hlist_node to use as temporary storage
* @head: the head for your list.
* @member: the name of the hlist_node within the struct.
*/
......
......@@ -33,7 +33,7 @@ struct wm8994_ldo_pdata {
* DRC configurations are specified with a label and a set of register
* values to write (the enable bits will be ignored). At runtime an
* enumerated control will be presented for each DRC block allowing
* the user to choose the configration to use.
* the user to choose the configuration to use.
*
* Configurations may be generated by hand or by using the DRC control
* panel provided by the WISCE - see http://www.wolfsonmicro.com/wisce/
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment