Merge branch 'next/devel' of ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc

* 'next/devel' of ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (128 commits)
  ARM: S5P64X0: External Interrupt Support
  ARM: EXYNOS4: Enable MFC on Samsung NURI
  ARM: EXYNOS4: Enable MFC on universal_c210
  ARM: S5PV210: Enable MFC on Goni
  ARM: S5P: Add support for MFC device
  ARM: EXYNOS4: Add support FIMD on SMDKC210
  ARM: EXYNOS4: Add platform device and helper functions for FIMD
  ARM: EXYNOS4: Add resource definition for FIMD
  ARM: EXYNOS4: Change devname for FIMD clkdev
  ARM: SAMSUNG: Add IRQ_I2S0 definition
  ARM: SAMSUNG: Add platform device for idma
  ARM: EXYNOS4: Add more registers to be saved and restored for PM
  ARM: EXYNOS4: Add more register addresses of CMU
  ARM: EXYNOS4: Add platform device for dwmci driver
  ARM: EXYNOS4: configure rtc-s3c on NURI
  ARM: EXYNOS4: configure MAX8903 secondary charger on NURI
  ARM: EXYNOS4: configure ADC on NURI
  ARM: EXYNOS4: configure MAX17042 fuel gauge on NURI
  ARM: EXYNOS4: configure regulators and PMIC(MAX8997) on NURI
  ARM: EXYNOS4: Increase NR_IRQS for devices with more IRQs
  ...

Fix up tons of silly conflicts:
 - arch/arm/mach-davinci/include/mach/psc.h
 - arch/arm/mach-exynos4/Kconfig
 - arch/arm/mach-exynos4/mach-smdkc210.c
 - arch/arm/mach-exynos4/pm.c
 - arch/arm/mach-imx/mm-imx1.c
 - arch/arm/mach-imx/mm-imx21.c
 - arch/arm/mach-imx/mm-imx25.c
 - arch/arm/mach-imx/mm-imx27.c
 - arch/arm/mach-imx/mm-imx31.c
 - arch/arm/mach-imx/mm-imx35.c
 - arch/arm/mach-mx5/mm.c
 - arch/arm/mach-s5pv210/mach-goni.c
 - arch/arm/mm/Kconfig

arch/arm/Kconfig

@@ -328,7 +328,7 @@ config ARCH_CLPS711X
 
 config ARCH_CNS3XXX
 	bool "Cavium Networks CNS3XXX family"
-	select CPU_V6
+	select CPU_V6K
 	select GENERIC_CLOCKEVENTS
 	select ARM_GIC
 	select MIGHT_HAVE_PCI
@@ -396,6 +396,7 @@ config ARCH_MXC
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select GENERIC_IRQ_CHIP
 	select HAVE_SCHED_CLOCK
 	help
 	  Support for Freescale MXC/iMX-based family of processors
@@ -603,7 +604,6 @@ config ARCH_TEGRA
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_SCHED_CLOCK
-	select ARCH_HAS_BARRIERS if CACHE_L2X0
 	select ARCH_HAS_CPUFREQ
 	help
 	  This enables support for NVIDIA Tegra based systems (Tegra APX,
@@ -630,6 +630,8 @@ config ARCH_PXA
 	select TICK_ONESHOT
 	select PLAT_PXA
 	select SPARSE_IRQ
+	select AUTO_ZRELADDR
+	select MULTI_IRQ_HANDLER
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
@@ -768,6 +770,7 @@ config ARCH_S5PV210
 	bool "Samsung S5PV210/S5PC110"
 	select CPU_V7
 	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_HAS_HOLES_MEMORYMODEL
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
@@ -786,6 +789,7 @@ config ARCH_EXYNOS4
 	bool "Samsung EXYNOS4"
 	select CPU_V7
 	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_HAS_HOLES_MEMORYMODEL
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select CLKDEV_LOOKUP

arch/arm/common/gic.c

@@ -38,12 +38,6 @@ static DEFINE_SPINLOCK(irq_controller_lock);
 /* Address of GIC 0 CPU interface */
 void __iomem *gic_cpu_base_addr __read_mostly;
 
-struct gic_chip_data {
-	unsigned int irq_offset;
-	void __iomem *dist_base;
-	void __iomem *cpu_base;
-};
-
 /*
  * Supported arch specific GIC irq extension.
  * Default make them NULL.

arch/arm/configs/mxs_defconfig

@@ -22,6 +22,8 @@ CONFIG_BLK_DEV_INTEGRITY=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_MXS=y
+CONFIG_MACH_MX23EVK=y
+CONFIG_MACH_MX28EVK=y
 CONFIG_MACH_STMP378X_DEVB=y
 CONFIG_MACH_TX28=y
 # CONFIG_ARM_THUMB is not set

arch/arm/configs/u8500_defconfig

@@ -11,12 +11,12 @@ CONFIG_ARCH_U8500=y
 CONFIG_UX500_SOC_DB5500=y
 CONFIG_UX500_SOC_DB8500=y
 CONFIG_MACH_U8500=y
+CONFIG_MACH_SNOWBALL=y
 CONFIG_MACH_U5500=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
-CONFIG_HOTPLUG_CPU=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
@@ -25,8 +25,13 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_NETFILTER=y
 CONFIG_PHONET=y
-CONFIG_PHONET_PIPECTRLR=y
 # CONFIG_WIRELESS is not set
 CONFIG_CAIF=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@@ -35,6 +40,13 @@ CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_MISC_DEVICES=y
 CONFIG_AB8500_PWM=y
 CONFIG_SENSORS_BH1780=y
+CONFIG_NETDEVICES=y
+CONFIG_SMSC_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMSC911X=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
@@ -49,9 +61,9 @@ CONFIG_INPUT_MISC=y
 CONFIG_INPUT_AB8500_PONKEY=y
 # CONFIG_SERIO is not set
 CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_NOMADIK=y
 CONFIG_I2C=y
@@ -64,14 +76,19 @@ CONFIG_GPIO_TC3589X=y
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_TC3589X=y
 CONFIG_AB8500_CORE=y
-CONFIG_REGULATOR=y
 CONFIG_REGULATOR_AB8500=y
 # CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_MUSB_PIO_ONLY=y
+CONFIG_USB_GADGET=y
+CONFIG_AB8500_USB=y
 CONFIG_MMC=y
+CONFIG_MMC_CLKGATE=y
 CONFIG_MMC_ARMMMCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_LM3530=y
 CONFIG_LEDS_LP5521=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AB8500=y
@@ -79,7 +96,6 @@ CONFIG_RTC_DRV_PL031=y
 CONFIG_DMADEVICES=y
 CONFIG_STE_DMA40=y
 CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
 CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
@@ -91,6 +107,8 @@ CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_CONFIGFS_FS=m
 # CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_MAGIC_SYSRQ=y
@@ -99,7 +117,5 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y

arch/arm/include/asm/hardware/gic.h

@@ -41,6 +41,12 @@ void gic_secondary_init(unsigned int);
 void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
 void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
 void gic_enable_ppi(unsigned int);
+
+struct gic_chip_data {
+	unsigned int irq_offset;
+	void __iomem *dist_base;
+	void __iomem *cpu_base;
+};
 #endif
 
 #endif

arch/arm/include/asm/irq.h

@@ -23,6 +23,7 @@ struct pt_regs;
 extern void migrate_irqs(void);
 
 extern void asm_do_IRQ(unsigned int, struct pt_regs *);
+void handle_IRQ(unsigned int, struct pt_regs *);
 void init_IRQ(void);
 
 #endif

arch/arm/kernel/irq.c

@@ -67,12 +67,12 @@ int arch_show_interrupts(struct seq_file *p, int prec)
 }
 
 /*
- * do_IRQ handles all hardware IRQ's.  Decoded IRQs should not
- * come via this function.  Instead, they should provide their
- * own 'handler'
+ * handle_IRQ handles all hardware IRQ's.  Decoded IRQs should
+ * not come via this function.  Instead, they should provide their
+ * own 'handler'.  Used by platform code implementing C-based 1st
+ * level decoding.
  */
-asmlinkage void __exception_irq_entry
-asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
+void handle_IRQ(unsigned int irq, struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
 
@@ -97,6 +97,15 @@ asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 	set_irq_regs(old_regs);
 }
 
+/*
+ * asm_do_IRQ is the interface to be used from assembly code.
+ */
+asmlinkage void __exception_irq_entry
+asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
+{
+	handle_IRQ(irq, regs);
+}
+
 void set_irq_flags(unsigned int irq, unsigned int iflags)
 {
 	unsigned long clr = 0, set = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;

arch/arm/mach-cns3xxx/cns3420vb.c

@@ -169,6 +169,8 @@ static struct platform_device *cns3420_pdevs[] __initdata = {
 
 static void __init cns3420_init(void)
 {
+	cns3xxx_l2x0_init();
+
 	platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs));
 
 	cns3xxx_ahci_init();

arch/arm/mach-cns3xxx/core.c

@@ -16,6 +16,7 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 #include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
 #include <mach/cns3xxx.h>
 #include "core.h"
 
@@ -244,3 +245,45 @@ static void __init cns3xxx_timer_init(void)
 struct sys_timer cns3xxx_timer = {
 	.init = cns3xxx_timer_init,
 };
+
+#ifdef CONFIG_CACHE_L2X0
+
+void __init cns3xxx_l2x0_init(void)
+{
+	void __iomem *base = ioremap(CNS3XXX_L2C_BASE, SZ_4K);
+	u32 val;
+
+	if (WARN_ON(!base))
+		return;
+
+	/*
+	 * Tag RAM Control register
+	 *
+	 * bit[10:8]	- 1 cycle of write accesses latency
+	 * bit[6:4]	- 1 cycle of read accesses latency
+	 * bit[3:0]	- 1 cycle of setup latency
+	 *
+	 * 1 cycle of latency for setup, read and write accesses
+	 */
+	val = readl(base + L2X0_TAG_LATENCY_CTRL);
+	val &= 0xfffff888;
+	writel(val, base + L2X0_TAG_LATENCY_CTRL);
+
+	/*
+	 * Data RAM Control register
+	 *
+	 * bit[10:8]	- 1 cycles of write accesses latency
+	 * bit[6:4]	- 1 cycles of read accesses latency
+	 * bit[3:0]	- 1 cycle of setup latency
+	 *
+	 * 1 cycle of latency for setup, read and write accesses
+	 */
+	val = readl(base + L2X0_DATA_LATENCY_CTRL);
+	val &= 0xfffff888;
+	writel(val, base + L2X0_DATA_LATENCY_CTRL);
+
+	/* 32 KiB, 8-way, parity disable */
+	l2x0_init(base, 0x00540000, 0xfe000fff);
+}
+
+#endif /* CONFIG_CACHE_L2X0 */

arch/arm/mach-cns3xxx/core.h

@@ -13,6 +13,12 @@
 
 extern struct sys_timer cns3xxx_timer;
 
+#ifdef CONFIG_CACHE_L2X0
+void __init cns3xxx_l2x0_init(void);
+#else
+static inline void cns3xxx_l2x0_init(void) {}
+#endif /* CONFIG_CACHE_L2X0 */
+
 void __init cns3xxx_map_io(void);
 void __init cns3xxx_init_irq(void);
 void cns3xxx_power_off(void);

arch/arm/mach-davinci/board-da850-evm.c

@@ -1117,6 +1117,8 @@ static __init int da850_evm_init_cpufreq(void)
 static __init int da850_evm_init_cpufreq(void) { return 0; }
 #endif
 
+#define DA850EVM_SATA_REFCLKPN_RATE	(100 * 1000 * 1000)
+
 static __init void da850_evm_init(void)
 {
 	int ret;
@@ -1237,6 +1239,11 @@ static __init void da850_evm_init(void)
 	if (ret)
 		pr_warning("da850_evm_init: spi 1 registration failed: %d\n",
 				ret);
+
+	ret = da850_register_sata(DA850EVM_SATA_REFCLKPN_RATE);
+	if (ret)
+		pr_warning("da850_evm_init: sata registration failed: %d\n",
+				ret);
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE

arch/arm/mach-davinci/clock.c

@@ -44,7 +44,7 @@ static void __clk_enable(struct clk *clk)
 		__clk_enable(clk->parent);
 	if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
 		davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc,
-				PSC_STATE_ENABLE);
+				true, clk->flags);
 }
 
 static void __clk_disable(struct clk *clk)
@@ -54,8 +54,7 @@ static void __clk_disable(struct clk *clk)
 	if (--clk->usecount == 0 && !(clk->flags & CLK_PLL) &&
 	    (clk->flags & CLK_PSC))
 		davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc,
-				(clk->flags & PSC_SWRSTDISABLE) ?
-				PSC_STATE_SWRSTDISABLE : PSC_STATE_DISABLE);
+				false, clk->flags);
 	if (clk->parent)
 		__clk_disable(clk->parent);
 }
@@ -239,8 +238,7 @@ static int __init clk_disable_unused(void)
 		pr_debug("Clocks: disable unused %s\n", ck->name);
 
 		davinci_psc_config(psc_domain(ck), ck->gpsc, ck->lpsc,
-				(ck->flags & PSC_SWRSTDISABLE) ?
-				PSC_STATE_SWRSTDISABLE : PSC_STATE_DISABLE);
+				false, ck->flags);
 	}
 	spin_unlock_irq(&clockfw_lock);
 

arch/arm/mach-davinci/clock.h

@@ -111,6 +111,7 @@ struct clk {
 #define CLK_PLL			BIT(4) /* PLL-derived clock */
 #define PRE_PLL			BIT(5) /* source is before PLL mult/div */
 #define PSC_SWRSTDISABLE	BIT(6) /* Disable state is SwRstDisable */
+#define PSC_FORCE		BIT(7) /* Force module state transtition */
 
 #define CLK(dev, con, ck) 	\
 	{			\

arch/arm/mach-davinci/da850.c

@@ -58,6 +58,7 @@ static struct pll_data pll0_data = {
 static struct clk ref_clk = {
 	.name		= "ref_clk",
 	.rate		= DA850_REF_FREQ,
+	.set_rate	= davinci_simple_set_rate,
 };
 
 static struct clk pll0_clk = {
@@ -373,6 +374,14 @@ static struct clk spi1_clk = {
 	.flags		= DA850_CLK_ASYNC3,
 };
 
+static struct clk sata_clk = {
+	.name		= "sata",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA850_LPSC1_SATA,
+	.gpsc		= 1,
+	.flags		= PSC_FORCE,
+};
+
 static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"ref",		&ref_clk),
 	CLK(NULL,		"pll0",		&pll0_clk),
@@ -419,6 +428,7 @@ static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"usb20",	&usb20_clk),
 	CLK("spi_davinci.0",	NULL,		&spi0_clk),
 	CLK("spi_davinci.1",	NULL,		&spi1_clk),
+	CLK("ahci",		NULL,		&sata_clk),
 	CLK(NULL,		NULL,		NULL),
 };
 

arch/arm/mach-davinci/devices-da8xx.c

@@ -14,6 +14,8 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/serial_8250.h>
+#include <linux/ahci_platform.h>
+#include <linux/clk.h>
 
 #include <mach/cputype.h>
 #include <mach/common.h>
@@ -33,6 +35,7 @@
 #define DA8XX_SPI0_BASE			0x01c41000
 #define DA830_SPI1_BASE			0x01e12000
 #define DA8XX_LCD_CNTRL_BASE		0x01e13000
+#define DA850_SATA_BASE			0x01e18000
 #define DA850_MMCSD1_BASE		0x01e1b000
 #define DA8XX_EMAC_CPPI_PORT_BASE	0x01e20000
 #define DA8XX_EMAC_CPGMACSS_BASE	0x01e22000
@@ -842,3 +845,126 @@ int __init da8xx_register_spi(int instance, struct spi_board_info *info,
 
 	return platform_device_register(&da8xx_spi_device[instance]);
 }
+
+#ifdef CONFIG_ARCH_DAVINCI_DA850
+
+static struct resource da850_sata_resources[] = {
+	{
+		.start	= DA850_SATA_BASE,
+		.end	= DA850_SATA_BASE + 0x1fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_DA850_SATAINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+/* SATA PHY Control Register offset from AHCI base */
+#define SATA_P0PHYCR_REG	0x178
+
+#define SATA_PHY_MPY(x)		((x) << 0)
+#define SATA_PHY_LOS(x)		((x) << 6)
+#define SATA_PHY_RXCDR(x)	((x) << 10)
+#define SATA_PHY_RXEQ(x)	((x) << 13)
+#define SATA_PHY_TXSWING(x)	((x) << 19)
+#define SATA_PHY_ENPLL(x)	((x) << 31)
+
+static struct clk *da850_sata_clk;
+static unsigned long da850_sata_refclkpn;
+
+/* Supported DA850 SATA crystal frequencies */
+#define KHZ_TO_HZ(freq) ((freq) * 1000)
+static unsigned long da850_sata_xtal[] = {
+	KHZ_TO_HZ(300000),
+	KHZ_TO_HZ(250000),
+	0,			/* Reserved */
+	KHZ_TO_HZ(187500),
+	KHZ_TO_HZ(150000),
+	KHZ_TO_HZ(125000),
+	KHZ_TO_HZ(120000),
+	KHZ_TO_HZ(100000),
+	KHZ_TO_HZ(75000),
+	KHZ_TO_HZ(60000),
+};
+
+static int da850_sata_init(struct device *dev, void __iomem *addr)
+{
+	int i, ret;
+	unsigned int val;
+
+	da850_sata_clk = clk_get(dev, NULL);
+	if (IS_ERR(da850_sata_clk))
+		return PTR_ERR(da850_sata_clk);
+
+	ret = clk_enable(da850_sata_clk);
+	if (ret)
+		goto err0;
+
+	/* Enable SATA clock receiver */
+	val = __raw_readl(DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
+	val &= ~BIT(0);
+	__raw_writel(val, DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
+
+	/* Get the multiplier needed for 1.5GHz PLL output */
+	for (i = 0; i < ARRAY_SIZE(da850_sata_xtal); i++)
+		if (da850_sata_xtal[i] == da850_sata_refclkpn)
+			break;
+
+	if (i == ARRAY_SIZE(da850_sata_xtal)) {
+		ret = -EINVAL;
+		goto err1;
+	}
+
+	val = SATA_PHY_MPY(i + 1) |
+		SATA_PHY_LOS(1) |
+		SATA_PHY_RXCDR(4) |
+		SATA_PHY_RXEQ(1) |
+		SATA_PHY_TXSWING(3) |
+		SATA_PHY_ENPLL(1);
+
+	__raw_writel(val, addr + SATA_P0PHYCR_REG);
+
+	return 0;
+
+err1:
+	clk_disable(da850_sata_clk);
+err0:
+	clk_put(da850_sata_clk);
+	return ret;
+}
+
+static void da850_sata_exit(struct device *dev)
+{
+	clk_disable(da850_sata_clk);
+	clk_put(da850_sata_clk);
+}
+
+static struct ahci_platform_data da850_sata_pdata = {
+	.init	= da850_sata_init,
+	.exit	= da850_sata_exit,
+};
+
+static u64 da850_sata_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device da850_sata_device = {
+	.name	= "ahci",
+	.id	= -1,
+	.dev	= {
+		.platform_data		= &da850_sata_pdata,
+		.dma_mask		= &da850_sata_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(da850_sata_resources),
+	.resource	= da850_sata_resources,
+};
+
+int __init da850_register_sata(unsigned long refclkpn)
+{
+	da850_sata_refclkpn = refclkpn;
+	if (!da850_sata_refclkpn)
+		return -EINVAL;
+
+	return platform_device_register(&da850_sata_device);
+}
+#endif

arch/arm/mach-davinci/include/mach/da8xx.h

@@ -57,6 +57,7 @@ extern unsigned int da850_max_speed;
 #define DA8XX_SYSCFG1_BASE	(IO_PHYS + 0x22C000)
 #define DA8XX_SYSCFG1_VIRT(x)	(da8xx_syscfg1_base + (x))
 #define DA8XX_DEEPSLEEP_REG	0x8
+#define DA8XX_PWRDN_REG		0x18
 
 #define DA8XX_PSC0_BASE		0x01c10000
 #define DA8XX_PLL0_BASE		0x01c11000
@@ -89,6 +90,7 @@ int da850_register_cpufreq(char *async_clk);
 int da8xx_register_cpuidle(void);
 void __iomem * __init da8xx_get_mem_ctlr(void);
 int da850_register_pm(struct platform_device *pdev);
+int __init da850_register_sata(unsigned long refclkpn);
 
 extern struct platform_device da8xx_serial_device;
 extern struct emac_platform_data da8xx_emac_pdata;

arch/arm/mach-davinci/include/mach/psc.h

@@ -244,12 +244,13 @@
 #define PSC_STATE_ENABLE	3
 
 #define MDSTAT_STATE_MASK	0x1f
+#define MDCTL_FORCE		BIT(31)
 
 #ifndef __ASSEMBLER__
 
 extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id);
 extern void davinci_psc_config(unsigned int domain, unsigned int ctlr,
-		unsigned int id, u32 next_state);
+		unsigned int id, bool enable, u32 flags);
 
 #endif
 

arch/arm/mach-davinci/psc.c

@@ -25,6 +25,8 @@
 #include <mach/cputype.h>
 #include <mach/psc.h>
 
+#include "clock.h"
+
 /* Return nonzero iff the domain's clock is active */
 int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
 {
@@ -48,11 +50,12 @@ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
 
 /* Enable or disable a PSC domain */
 void davinci_psc_config(unsigned int domain, unsigned int ctlr,
-		unsigned int id, u32 next_state)
+		unsigned int id, bool enable, u32 flags)
 {
 	u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
 	void __iomem *psc_base;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	u32 next_state = PSC_STATE_ENABLE;
 
 	if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
 		pr_warning("PSC: Bad psc data: 0x%x[%d]\n",
@@ -62,9 +65,18 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr,
 
 	psc_base = ioremap(soc_info->psc_bases[ctlr], SZ_4K);
 
+	if (!enable) {
+		if (flags & PSC_SWRSTDISABLE)
+			next_state = PSC_STATE_SWRSTDISABLE;
+		else
+			next_state = PSC_STATE_DISABLE;
+	}
+
 	mdctl = __raw_readl(psc_base + MDCTL + 4 * id);
 	mdctl &= ~MDSTAT_STATE_MASK;
 	mdctl |= next_state;
+	if (flags & PSC_FORCE)
+		mdctl |= MDCTL_FORCE;
 	__raw_writel(mdctl, psc_base + MDCTL + 4 * id);
 
 	pdstat = __raw_readl(psc_base + PDSTAT);

arch/arm/mach-exynos4/Kconfig

@@ -16,7 +16,8 @@ config CPU_EXYNOS4210
 	  Enable EXYNOS4210 CPU support
 
 config EXYNOS4_MCT
-	bool "Kernel timer support by MCT"
+	bool
+	default y
 	help
 	  Use MCT (Multi Core Timer) as kernel timers
 
@@ -25,6 +26,11 @@ config EXYNOS4_DEV_AHCI
 	help
 	  Compile in platform device definitions for AHCI
 
+config EXYNOS4_SETUP_FIMD0
+	bool
+	help
+	  Common setup code for FIMD0.
+
 config EXYNOS4_DEV_PD
 	bool
 	help
@@ -35,6 +41,11 @@ config EXYNOS4_DEV_SYSMMU
 	help
 	  Common setup code for SYSTEM MMU in EXYNOS4
 
+config EXYNOS4_DEV_DWMCI
+	bool
+	help
+	  Compile in platform device definitions for DWMCI
+
 config EXYNOS4_SETUP_I2C1
 	bool
 	help
@@ -103,6 +114,7 @@ menu "EXYNOS4 Machines"
 config MACH_SMDKC210
 	bool "SMDKC210"
 	select CPU_EXYNOS4210
+	select S5P_DEV_FIMD0
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
 	select S3C_DEV_I2C1
@@ -114,6 +126,7 @@ config MACH_SMDKC210
 	select SAMSUNG_DEV_BACKLIGHT
 	select EXYNOS4_DEV_PD
 	select EXYNOS4_DEV_SYSMMU
+	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_SDHCI
 	help
@@ -122,6 +135,7 @@ config MACH_SMDKC210
 config MACH_SMDKV310
 	bool "SMDKV310"
 	select CPU_EXYNOS4210
+	select S5P_DEV_FIMD0
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
 	select S3C_DEV_I2C1
@@ -130,10 +144,12 @@ config MACH_SMDKV310
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
 	select SAMSUNG_DEV_BACKLIGHT
+	select EXYNOS4_DEV_AHCI
 	select SAMSUNG_DEV_KEYPAD
 	select EXYNOS4_DEV_PD
 	select SAMSUNG_DEV_PWM
 	select EXYNOS4_DEV_SYSMMU
+	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_KEYPAD
 	select EXYNOS4_SETUP_SDHCI
@@ -157,13 +173,22 @@ config MACH_ARMLEX4210
 config MACH_UNIVERSAL_C210
 	bool "Mobile UNIVERSAL_C210 Board"
 	select CPU_EXYNOS4210
+	select S5P_GPIO_INT
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S5P_DEV_FIMC3
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
 	select S3C_DEV_I2C1
+	select S3C_DEV_I2C3
 	select S3C_DEV_I2C5
+	select S5P_DEV_MFC
 	select S5P_DEV_ONENAND
+	select EXYNOS4_DEV_PD
 	select EXYNOS4_SETUP_I2C1
+	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C5
 	select EXYNOS4_SETUP_SDHCI
 	help
@@ -180,13 +205,16 @@ config MACH_NURI
 	select S3C_DEV_I2C1
 	select S3C_DEV_I2C3
 	select S3C_DEV_I2C5
+	select S5P_DEV_MFC
 	select S5P_DEV_USB_EHCI
+	select EXYNOS4_DEV_PD
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C5
 	select EXYNOS4_SETUP_SDHCI
 	select EXYNOS4_SETUP_USB_PHY
 	select SAMSUNG_DEV_PWM
+	select SAMSUNG_DEV_ADC
 	help
 	  Machine support for Samsung Mobile NURI Board.
 

arch/arm/mach-exynos4/Makefile

@@ -13,18 +13,13 @@ obj-				:=
 # Core support for EXYNOS4 system
 
 obj-$(CONFIG_CPU_EXYNOS4210)	+= cpu.o init.o clock.o irq-combiner.o
-obj-$(CONFIG_CPU_EXYNOS4210)	+= setup-i2c0.o irq-eint.o dma.o
+obj-$(CONFIG_CPU_EXYNOS4210)	+= setup-i2c0.o irq-eint.o dma.o pmu.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 
-ifeq ($(CONFIG_EXYNOS4_MCT),y)
-obj-y				+= mct.o
-else
-obj-y				+= time.o
-obj-$(CONFIG_LOCAL_TIMERS)	+= localtimer.o
-endif
+obj-$(CONFIG_EXYNOS4_MCT)	+= mct.o
 
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 
@@ -42,8 +37,10 @@ obj-y					+= dev-audio.o
 obj-$(CONFIG_EXYNOS4_DEV_AHCI)		+= dev-ahci.o
 obj-$(CONFIG_EXYNOS4_DEV_PD)		+= dev-pd.o
 obj-$(CONFIG_EXYNOS4_DEV_SYSMMU)	+= dev-sysmmu.o
+obj-$(CONFIG_EXYNOS4_DEV_DWMCI)	+= dev-dwmci.o
 
 obj-$(CONFIG_EXYNOS4_SETUP_FIMC)	+= setup-fimc.o
+obj-$(CONFIG_EXYNOS4_SETUP_FIMD0)	+= setup-fimd0.o
 obj-$(CONFIG_EXYNOS4_SETUP_I2C1)	+= setup-i2c1.o
 obj-$(CONFIG_EXYNOS4_SETUP_I2C2)	+= setup-i2c2.o
 obj-$(CONFIG_EXYNOS4_SETUP_I2C3)	+= setup-i2c3.o

arch/arm/mach-exynos4/clock.c

@@ -527,6 +527,11 @@ static struct clk init_clocks_off[] = {
 		.name		= "fimg2d",
 		.enable		= exynos4_clk_ip_image_ctrl,
 		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "mfc",
+		.devname	= "s5p-mfc",
+		.enable		= exynos4_clk_ip_mfc_ctrl,
+		.ctrlbit	= (1 << 0),
 	}, {
 		.name		= "i2c",
 		.devname	= "s3c2440-i2c.0",
@@ -731,6 +736,52 @@ static struct clksrc_sources clkset_mout_g2d = {
 	.nr_sources	= ARRAY_SIZE(clkset_mout_g2d_list),
 };
 
+static struct clk *clkset_mout_mfc0_list[] = {
+	[0] = &clk_mout_mpll.clk,
+	[1] = &clk_sclk_apll.clk,
+};
+
+static struct clksrc_sources clkset_mout_mfc0 = {
+	.sources	= clkset_mout_mfc0_list,
+	.nr_sources	= ARRAY_SIZE(clkset_mout_mfc0_list),
+};
+
+static struct clksrc_clk clk_mout_mfc0 = {
+	.clk	= {
+		.name		= "mout_mfc0",
+	},
+	.sources	= &clkset_mout_mfc0,
+	.reg_src	= { .reg = S5P_CLKSRC_MFC, .shift = 0, .size = 1 },
+};
+
+static struct clk *clkset_mout_mfc1_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_sclk_vpll.clk,
+};
+
+static struct clksrc_sources clkset_mout_mfc1 = {
+	.sources	= clkset_mout_mfc1_list,
+	.nr_sources	= ARRAY_SIZE(clkset_mout_mfc1_list),
+};
+
+static struct clksrc_clk clk_mout_mfc1 = {
+	.clk	= {
+		.name		= "mout_mfc1",
+	},
+	.sources	= &clkset_mout_mfc1,
+	.reg_src	= { .reg = S5P_CLKSRC_MFC, .shift = 4, .size = 1 },
+};
+
+static struct clk *clkset_mout_mfc_list[] = {
+	[0] = &clk_mout_mfc0.clk,
+	[1] = &clk_mout_mfc1.clk,
+};
+
+static struct clksrc_sources clkset_mout_mfc = {
+	.sources	= clkset_mout_mfc_list,
+	.nr_sources	= ARRAY_SIZE(clkset_mout_mfc_list),
+};
+
 static struct clksrc_clk clk_dout_mmc0 = {
 	.clk		= {
 		.name		= "dout_mmc0",
@@ -972,6 +1023,14 @@ static struct clksrc_clk clksrcs[] = {
 		.sources = &clkset_mout_g2d,
 		.reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 8, .size = 1 },
 		.reg_div = { .reg = S5P_CLKDIV_IMAGE, .shift = 0, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_mfc",
+			.devname	= "s5p-mfc",
+		},
+		.sources = &clkset_mout_mfc,
+		.reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 8, .size = 1 },
+		.reg_div = { .reg = S5P_CLKDIV_MFC, .shift = 0, .size = 4 },
 	}, {
 		.clk		= {
 			.name		= "sclk_mmc",
@@ -1049,6 +1108,8 @@ static struct clksrc_clk *sysclks[] = {
 	&clk_dout_mmc2,
 	&clk_dout_mmc3,
 	&clk_dout_mmc4,
+	&clk_mout_mfc0,
+	&clk_mout_mfc1,
 };
 
 static int xtal_rate;

arch/arm/mach-exynos4/cpu.c

@@ -16,12 +16,16 @@
 
 #include <asm/proc-fns.h>
 #include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
 
 #include <plat/cpu.h>
 #include <plat/clock.h>
+#include <plat/devs.h>
 #include <plat/exynos4.h>
+#include <plat/adc-core.h>
 #include <plat/sdhci.h>
 #include <plat/devs.h>
+#include <plat/fb-core.h>
 #include <plat/fimc-core.h>
 #include <plat/iic-core.h>
 
@@ -103,7 +107,17 @@ static struct map_desc exynos4_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_HSPHY),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
-	}
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GIC_CPU,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_GIC_CPU),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GIC_DIST,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_GIC_DIST),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	},
 };
 
 static void exynos4_idle(void)
@@ -129,6 +143,8 @@ void __init exynos4_map_io(void)
 	exynos4_default_sdhci2();
 	exynos4_default_sdhci3();
 
+	s3c_adc_setname("samsung-adc-v3");
+
 	s3c_fimc_setname(0, "exynos4-fimc");
 	s3c_fimc_setname(1, "exynos4-fimc");
 	s3c_fimc_setname(2, "exynos4-fimc");
@@ -138,6 +154,8 @@ void __init exynos4_map_io(void)
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
 	s3c_i2c2_setname("s3c2440-i2c");
+
+	s5p_fb_setname(0, "exynos4-fb");
 }
 
 void __init exynos4_init_clocks(int xtal)
@@ -150,22 +168,23 @@ void __init exynos4_init_clocks(int xtal)
 	exynos4_setup_clocks();
 }
 
+static void exynos4_gic_irq_eoi(struct irq_data *d)
+{
+	struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
+
+	gic_data->cpu_base = S5P_VA_GIC_CPU +
+			    (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+}
+
 void __init exynos4_init_irq(void)
 {
 	int irq;
 
-	gic_init(0, IRQ_LOCALTIMER, S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+	gic_init(0, IRQ_SPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+	gic_arch_extn.irq_eoi = exynos4_gic_irq_eoi;
 
 	for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
 
-		/*
-		 * From SPI(0) to SPI(39) and SPI(51), SPI(53) are
-		 * connected to the interrupt combiner. These irqs
-		 * should be initialized to support cascade interrupt.
-		 */
-		if ((irq >= 40) && !(irq == 51) && !(irq == 53))
-			continue;
-
 		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
 				COMBINER_IRQ(irq, 0));
 		combiner_cascade_irq(irq, IRQ_SPI(irq));

arch/arm/mach-exynos4/dev-audio.c

@@ -21,6 +21,7 @@
 #include <mach/map.h>
 #include <mach/dma.h>
 #include <mach/irqs.h>
+#include <mach/regs-audss.h>
 
 static const char *rclksrc[] = {
 	[0] = "busclk",
@@ -55,6 +56,7 @@ static struct s3c_audio_pdata i2sv5_pdata = {
 			.quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
 					 | QUIRK_NEED_RSTCLR,
 			.src_clk = rclksrc,
+			.idma_addr = EXYNOS4_AUDSS_INT_MEM,
 		},
 	},
 };

arch/arm/mach-exynos4/dev-dwmci.c

+/*
+ * linux/arch/arm/mach-exynos4/dev-dwmci.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Platform device for Synopsys DesignWare Mobile Storage IP
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mmc/dw_mmc.h>
+
+#include <plat/devs.h>
+
+#include <mach/map.h>
+
+static int exynos4_dwmci_get_bus_wd(u32 slot_id)
+{
+	return 4;
+}
+
+static int exynos4_dwmci_init(u32 slot_id, irq_handler_t handler, void *data)
+{
+	return 0;
+}
+
+static struct resource exynos4_dwmci_resource[] = {
+	[0] = {
+		.start	= EXYNOS4_PA_DWMCI,
+		.end	= EXYNOS4_PA_DWMCI + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_DWMCI,
+		.end	= IRQ_DWMCI,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct dw_mci_board exynos4_dwci_pdata = {
+	.num_slots			= 1,
+	.quirks				= DW_MCI_QUIRK_BROKEN_CARD_DETECTION,
+	.bus_hz				= 80 * 1000 * 1000,
+	.detect_delay_ms	= 200,
+	.init				= exynos4_dwmci_init,
+	.get_bus_wd			= exynos4_dwmci_get_bus_wd,
+};
+
+static u64 exynos4_dwmci_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device exynos4_device_dwmci = {
+	.name		= "dw_mmc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(exynos4_dwmci_resource),
+	.resource	= exynos4_dwmci_resource,
+	.dev		= {
+		.dma_mask		= &exynos4_dwmci_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data	= &exynos4_dwci_pdata,
+	},
+};
+
+void __init exynos4_dwmci_set_platdata(struct dw_mci_board *pd)
+{
+	struct dw_mci_board *npd;
+
+	npd = s3c_set_platdata(pd, sizeof(struct dw_mci_board),
+			&exynos4_device_dwmci);
+
+	if (!npd->init)
+		npd->init = exynos4_dwmci_init;
+	if (!npd->get_bus_wd)
+		npd->get_bus_wd = exynos4_dwmci_get_bus_wd;
+}

arch/arm/mach-exynos4/hotplug.c

@@ -13,9 +13,12 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/smp.h>
+#include <linux/io.h>
 
 #include <asm/cacheflush.h>
 
+#include <mach/regs-pmu.h>
+
 extern volatile int pen_release;
 
 static inline void cpu_enter_lowpower(void)
@@ -58,12 +61,12 @@ static inline void cpu_leave_lowpower(void)
 
 static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
 {
-	/*
-	 * there is no power-control hardware on this platform, so all
-	 * we can do is put the core into WFI; this is safe as the calling
-	 * code will have already disabled interrupts
-	 */
 	for (;;) {
+
+		/* make cpu1 to be turned off at next WFI command */
+		if (cpu == 1)
+			__raw_writel(0, S5P_ARM_CORE1_CONFIGURATION);
+
 		/*
 		 * here's the WFI
 		 */

arch/arm/mach-exynos4/localtimer.c → arch/arm/mach-exynos4/include/mach/dwmci.h

-/* linux/arch/arm/mach-exynos4/localtimer.c
+/* linux/arch/arm/mach-exynos4/include/mach/dwmci.h
  *
- * Cloned from linux/arch/arm/mach-realview/localtimer.c
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
  *
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
+ * Synopsys DesignWare Mobile Storage for EXYNOS4210
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
-*/
+ */
 
-#include <linux/clockchips.h>
+#ifndef __ASM_ARM_ARCH_DWMCI_H
+#define __ASM_ARM_ARCH_DWMCI_H __FILE__
 
-#include <asm/irq.h>
-#include <asm/localtimer.h>
+#include <linux/mmc/dw_mmc.h>
 
-/*
- * Setup the local clock events for a CPU.
- */
-int __cpuinit local_timer_setup(struct clock_event_device *evt)
-{
-	evt->irq = IRQ_LOCALTIMER;
-	twd_timer_setup(evt);
-	return 0;
-}
+extern void exynos4_dwmci_set_platdata(struct dw_mci_board *pd);
+
+#endif /* __ASM_ARM_ARCH_DWMCI_H */

arch/arm/mach-exynos4/include/mach/entry-macro.S

@@ -10,6 +10,7 @@
 */
 
 #include <mach/hardware.h>
+#include <mach/map.h>
 #include <asm/hardware/gic.h>
 
 		.macro	disable_fiq
@@ -18,6 +19,10 @@
 		.macro  get_irqnr_preamble, base, tmp
 		ldr	\base, =gic_cpu_base_addr
 		ldr	\base, [\base]
+		mrc     p15, 0, \tmp, c0, c0, 5
+		and     \tmp, \tmp, #3
+		cmp     \tmp, #1
+		addeq   \base, \base, #EXYNOS4_GIC_BANK_OFFSET
 		.endm
 
 		.macro  arch_ret_to_user, tmp1, tmp2
@@ -75,10 +80,4 @@
 		/* As above, this assumes that irqstat and base are preserved.. */
 
 		.macro test_for_ltirq, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		mov	\tmp, #0
-		cmp	\irqnr, #29
-		moveq	\tmp, #1
-		streq	\irqstat, [\base, #GIC_CPU_EOI]
-		cmp	\tmp, #0
 		.endm

arch/arm/mach-exynos4/include/mach/irqs.h

@@ -19,40 +19,105 @@
 
 #define IRQ_PPI(x)		S5P_IRQ(x+16)
 
-#define IRQ_LOCALTIMER		IRQ_PPI(13)
-
 /* SPI: Shared Peripheral Interrupt */
 
 #define IRQ_SPI(x)		S5P_IRQ(x+32)
 
-#define IRQ_MCT1		IRQ_SPI(35)
-
-#define IRQ_EINT0		IRQ_SPI(40)
-#define IRQ_EINT1		IRQ_SPI(41)
-#define IRQ_EINT2		IRQ_SPI(42)
-#define IRQ_EINT3		IRQ_SPI(43)
-#define IRQ_USB_HSOTG		IRQ_SPI(44)
-#define IRQ_USB_HOST		IRQ_SPI(45)
-#define IRQ_MODEM_IF		IRQ_SPI(46)
-#define IRQ_ROTATOR		IRQ_SPI(47)
-#define IRQ_JPEG		IRQ_SPI(48)
-#define IRQ_2D			IRQ_SPI(49)
-#define IRQ_PCIE		IRQ_SPI(50)
-#define IRQ_MCT0		IRQ_SPI(51)
-#define IRQ_MFC			IRQ_SPI(52)
-#define IRQ_AUDIO_SS		IRQ_SPI(54)
-#define IRQ_AC97		IRQ_SPI(55)
-#define IRQ_SPDIF		IRQ_SPI(56)
-#define IRQ_KEYPAD		IRQ_SPI(57)
-#define IRQ_INTFEEDCTRL_SSS	IRQ_SPI(58)
-#define IRQ_SLIMBUS		IRQ_SPI(59)
-#define IRQ_PMU			IRQ_SPI(60)
-#define IRQ_TSI			IRQ_SPI(61)
-#define IRQ_SATA		IRQ_SPI(62)
-#define IRQ_GPS			IRQ_SPI(63)
+#define IRQ_EINT0		IRQ_SPI(16)
+#define IRQ_EINT1		IRQ_SPI(17)
+#define IRQ_EINT2		IRQ_SPI(18)
+#define IRQ_EINT3		IRQ_SPI(19)
+#define IRQ_EINT4		IRQ_SPI(20)
+#define IRQ_EINT5		IRQ_SPI(21)
+#define IRQ_EINT6		IRQ_SPI(22)
+#define IRQ_EINT7		IRQ_SPI(23)
+#define IRQ_EINT8		IRQ_SPI(24)
+#define IRQ_EINT9		IRQ_SPI(25)
+#define IRQ_EINT10		IRQ_SPI(26)
+#define IRQ_EINT11		IRQ_SPI(27)
+#define IRQ_EINT12		IRQ_SPI(28)
+#define IRQ_EINT13		IRQ_SPI(29)
+#define IRQ_EINT14		IRQ_SPI(30)
+#define IRQ_EINT15		IRQ_SPI(31)
+#define IRQ_EINT16_31		IRQ_SPI(32)
+
+#define IRQ_PDMA0		IRQ_SPI(35)
+#define IRQ_PDMA1		IRQ_SPI(36)
+#define IRQ_TIMER0_VIC		IRQ_SPI(37)
+#define IRQ_TIMER1_VIC		IRQ_SPI(38)
+#define IRQ_TIMER2_VIC		IRQ_SPI(39)
+#define IRQ_TIMER3_VIC		IRQ_SPI(40)
+#define IRQ_TIMER4_VIC		IRQ_SPI(41)
+#define IRQ_MCT_L0		IRQ_SPI(42)
+#define IRQ_WDT			IRQ_SPI(43)
+#define IRQ_RTC_ALARM		IRQ_SPI(44)
+#define IRQ_RTC_TIC		IRQ_SPI(45)
+#define IRQ_GPIO_XB		IRQ_SPI(46)
+#define IRQ_GPIO_XA		IRQ_SPI(47)
+#define IRQ_MCT_L1		IRQ_SPI(48)
+
+#define IRQ_UART0		IRQ_SPI(52)
+#define IRQ_UART1		IRQ_SPI(53)
+#define IRQ_UART2		IRQ_SPI(54)
+#define IRQ_UART3		IRQ_SPI(55)
+#define IRQ_UART4		IRQ_SPI(56)
+#define IRQ_MCT_G0		IRQ_SPI(57)
+#define IRQ_IIC			IRQ_SPI(58)
+#define IRQ_IIC1		IRQ_SPI(59)
+#define IRQ_IIC2		IRQ_SPI(60)
+#define IRQ_IIC3		IRQ_SPI(61)
+#define IRQ_IIC4		IRQ_SPI(62)
+#define IRQ_IIC5		IRQ_SPI(63)
+#define IRQ_IIC6		IRQ_SPI(64)
+#define IRQ_IIC7		IRQ_SPI(65)
+
+#define IRQ_USB_HOST		IRQ_SPI(70)
+#define IRQ_USB_HSOTG		IRQ_SPI(71)
+#define IRQ_MODEM_IF		IRQ_SPI(72)
+#define IRQ_HSMMC0		IRQ_SPI(73)
+#define IRQ_HSMMC1		IRQ_SPI(74)
+#define IRQ_HSMMC2		IRQ_SPI(75)
+#define IRQ_HSMMC3		IRQ_SPI(76)
+#define IRQ_DWMCI		IRQ_SPI(77)
+
+#define IRQ_MIPICSI0		IRQ_SPI(78)
+
+#define IRQ_MIPICSI1		IRQ_SPI(80)
+
+#define IRQ_ONENAND_AUDI	IRQ_SPI(82)
+#define IRQ_ROTATOR		IRQ_SPI(83)
+#define IRQ_FIMC0		IRQ_SPI(84)
+#define IRQ_FIMC1		IRQ_SPI(85)
+#define IRQ_FIMC2		IRQ_SPI(86)
+#define IRQ_FIMC3		IRQ_SPI(87)
+#define IRQ_JPEG		IRQ_SPI(88)
+#define IRQ_2D			IRQ_SPI(89)
+#define IRQ_PCIE		IRQ_SPI(90)
+
+#define IRQ_MFC			IRQ_SPI(94)
+
+#define IRQ_AUDIO_SS		IRQ_SPI(96)
+#define IRQ_I2S0		IRQ_SPI(97)
+#define IRQ_I2S1		IRQ_SPI(98)
+#define IRQ_I2S2		IRQ_SPI(99)
+#define IRQ_AC97		IRQ_SPI(100)
+
+#define IRQ_SPDIF		IRQ_SPI(104)
+#define IRQ_ADC0		IRQ_SPI(105)
+#define IRQ_PEN0		IRQ_SPI(106)
+#define IRQ_ADC1		IRQ_SPI(107)
+#define IRQ_PEN1		IRQ_SPI(108)
+#define IRQ_KEYPAD		IRQ_SPI(109)
+#define IRQ_PMU			IRQ_SPI(110)
+#define IRQ_GPS			IRQ_SPI(111)
+#define IRQ_INTFEEDCTRL_SSS	IRQ_SPI(112)
+#define IRQ_SLIMBUS		IRQ_SPI(113)
+
+#define IRQ_TSI			IRQ_SPI(115)
+#define IRQ_SATA		IRQ_SPI(116)
 
 #define MAX_IRQ_IN_COMBINER	8
-#define COMBINER_GROUP(x)	((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(64))
+#define COMBINER_GROUP(x)	((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(128))
 #define COMBINER_IRQ(x, y)	(COMBINER_GROUP(x) + y)
 
 #define IRQ_SYSMMU_MDMA0_0	COMBINER_IRQ(4, 0)
@@ -73,75 +138,14 @@
 #define IRQ_SYSMMU_MFC_M1_0	COMBINER_IRQ(5, 6)
 #define IRQ_SYSMMU_PCIE_0	COMBINER_IRQ(5, 7)
 
-#define IRQ_PDMA0		COMBINER_IRQ(21, 0)
-#define IRQ_PDMA1		COMBINER_IRQ(21, 1)
-
-#define IRQ_TIMER0_VIC		COMBINER_IRQ(22, 0)
-#define IRQ_TIMER1_VIC		COMBINER_IRQ(22, 1)
-#define IRQ_TIMER2_VIC		COMBINER_IRQ(22, 2)
-#define IRQ_TIMER3_VIC		COMBINER_IRQ(22, 3)
-#define IRQ_TIMER4_VIC		COMBINER_IRQ(22, 4)
-
-#define IRQ_RTC_ALARM		COMBINER_IRQ(23, 0)
-#define IRQ_RTC_TIC		COMBINER_IRQ(23, 1)
-
-#define IRQ_GPIO_XB		COMBINER_IRQ(24, 0)
-#define IRQ_GPIO_XA		COMBINER_IRQ(24, 1)
-
-#define IRQ_UART0		COMBINER_IRQ(26, 0)
-#define IRQ_UART1		COMBINER_IRQ(26, 1)
-#define IRQ_UART2		COMBINER_IRQ(26, 2)
-#define IRQ_UART3		COMBINER_IRQ(26, 3)
-#define IRQ_UART4		COMBINER_IRQ(26, 4)
-
-#define IRQ_IIC			COMBINER_IRQ(27, 0)
-#define IRQ_IIC1		COMBINER_IRQ(27, 1)
-#define IRQ_IIC2		COMBINER_IRQ(27, 2)
-#define IRQ_IIC3		COMBINER_IRQ(27, 3)
-#define IRQ_IIC4		COMBINER_IRQ(27, 4)
-#define IRQ_IIC5		COMBINER_IRQ(27, 5)
-#define IRQ_IIC6		COMBINER_IRQ(27, 6)
-#define IRQ_IIC7		COMBINER_IRQ(27, 7)
-
-#define IRQ_HSMMC0		COMBINER_IRQ(29, 0)
-#define IRQ_HSMMC1		COMBINER_IRQ(29, 1)
-#define IRQ_HSMMC2		COMBINER_IRQ(29, 2)
-#define IRQ_HSMMC3		COMBINER_IRQ(29, 3)
-
-#define IRQ_MIPI_CSIS0		COMBINER_IRQ(30, 0)
-#define IRQ_MIPI_CSIS1		COMBINER_IRQ(30, 1)
-
-#define IRQ_FIMC0		COMBINER_IRQ(32, 0)
-#define IRQ_FIMC1		COMBINER_IRQ(32, 1)
-#define IRQ_FIMC2		COMBINER_IRQ(33, 0)
-#define IRQ_FIMC3		COMBINER_IRQ(33, 1)
-
-#define IRQ_ONENAND_AUDI	COMBINER_IRQ(34, 0)
-
-#define IRQ_MCT_L1		COMBINER_IRQ(35, 3)
-
-#define IRQ_EINT4		COMBINER_IRQ(37, 0)
-#define IRQ_EINT5		COMBINER_IRQ(37, 1)
-#define IRQ_EINT6		COMBINER_IRQ(37, 2)
-#define IRQ_EINT7		COMBINER_IRQ(37, 3)
-#define IRQ_EINT8		COMBINER_IRQ(38, 0)
-
-#define IRQ_EINT9		COMBINER_IRQ(38, 1)
-#define IRQ_EINT10		COMBINER_IRQ(38, 2)
-#define IRQ_EINT11		COMBINER_IRQ(38, 3)
-#define IRQ_EINT12		COMBINER_IRQ(38, 4)
-#define IRQ_EINT13		COMBINER_IRQ(38, 5)
-#define IRQ_EINT14		COMBINER_IRQ(38, 6)
-#define IRQ_EINT15		COMBINER_IRQ(38, 7)
-
-#define IRQ_EINT16_31		COMBINER_IRQ(39, 0)
-
-#define IRQ_MCT_L0		COMBINER_IRQ(51, 0)
+#define IRQ_FIMD0_FIFO		COMBINER_IRQ(11, 0)
+#define IRQ_FIMD0_VSYNC		COMBINER_IRQ(11, 1)
+#define IRQ_FIMD0_SYSTEM	COMBINER_IRQ(11, 2)
 
-#define IRQ_WDT			COMBINER_IRQ(53, 0)
-#define IRQ_MCT_G0		COMBINER_IRQ(53, 4)
+#define MAX_COMBINER_NR		16
 
-#define MAX_COMBINER_NR		54
+#define IRQ_ADC			IRQ_ADC0
+#define IRQ_TC			IRQ_PEN0
 
 #define S5P_IRQ_EINT_BASE	COMBINER_IRQ(MAX_COMBINER_NR, 0)
 
@@ -155,6 +159,6 @@
 #define IRQ_GPIO_END		(S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT)
 
 /* Set the default NR_IRQS */
-#define NR_IRQS			(IRQ_GPIO_END)
+#define NR_IRQS			(IRQ_GPIO_END + 64)
 
 #endif /* __ASM_ARCH_IRQS_H */

arch/arm/mach-exynos4/include/mach/map.h

@@ -57,12 +57,14 @@
 
 #define EXYNOS4_PA_DMC0			0x10400000
 
-#define EXYNOS4_PA_COMBINER		0x10448000
+#define EXYNOS4_PA_COMBINER		0x10440000
+
+#define EXYNOS4_PA_GIC_CPU		0x10480000
+#define EXYNOS4_PA_GIC_DIST		0x10490000
+#define EXYNOS4_GIC_BANK_OFFSET		0x8000
 
 #define EXYNOS4_PA_COREPERI		0x10500000
-#define EXYNOS4_PA_GIC_CPU		0x10500100
 #define EXYNOS4_PA_TWD			0x10500600
-#define EXYNOS4_PA_GIC_DIST		0x10501000
 #define EXYNOS4_PA_L2CC			0x10502000
 
 #define EXYNOS4_PA_MDMA			0x10810000
@@ -93,7 +95,10 @@
 #define EXYNOS4_PA_MIPI_CSIS0		0x11880000
 #define EXYNOS4_PA_MIPI_CSIS1		0x11890000
 
+#define EXYNOS4_PA_FIMD0		0x11C00000
+
 #define EXYNOS4_PA_HSMMC(x)		(0x12510000 + ((x) * 0x10000))
+#define EXYNOS4_PA_DWMCI		0x12550000
 
 #define EXYNOS4_PA_SATA			0x12560000
 #define EXYNOS4_PA_SATAPHY		0x125D0000
@@ -103,11 +108,15 @@
 
 #define EXYNOS4_PA_EHCI			0x12580000
 #define EXYNOS4_PA_HSPHY		0x125B0000
+#define EXYNOS4_PA_MFC			0x13400000
 
 #define EXYNOS4_PA_UART			0x13800000
 
 #define EXYNOS4_PA_IIC(x)		(0x13860000 + ((x) * 0x10000))
 
+#define EXYNOS4_PA_ADC			0x13910000
+#define EXYNOS4_PA_ADC1			0x13911000
+
 #define EXYNOS4_PA_AC97			0x139A0000
 
 #define EXYNOS4_PA_SPDIF		0x139B0000
@@ -130,6 +139,8 @@
 #define S3C_PA_IIC5			EXYNOS4_PA_IIC(5)
 #define S3C_PA_IIC6			EXYNOS4_PA_IIC(6)
 #define S3C_PA_IIC7			EXYNOS4_PA_IIC(7)
+#define SAMSUNG_PA_ADC			EXYNOS4_PA_ADC
+#define SAMSUNG_PA_ADC1			EXYNOS4_PA_ADC1
 #define S3C_PA_RTC			EXYNOS4_PA_RTC
 #define S3C_PA_WDT			EXYNOS4_PA_WATCHDOG
 
@@ -140,10 +151,12 @@
 #define S5P_PA_FIMC3			EXYNOS4_PA_FIMC3
 #define S5P_PA_MIPI_CSIS0		EXYNOS4_PA_MIPI_CSIS0
 #define S5P_PA_MIPI_CSIS1		EXYNOS4_PA_MIPI_CSIS1
+#define S5P_PA_FIMD0			EXYNOS4_PA_FIMD0
 #define S5P_PA_ONENAND			EXYNOS4_PA_ONENAND
 #define S5P_PA_ONENAND_DMA		EXYNOS4_PA_ONENAND_DMA
 #define S5P_PA_SDRAM			EXYNOS4_PA_SDRAM
 #define S5P_PA_SROMC			EXYNOS4_PA_SROMC
+#define S5P_PA_MFC			EXYNOS4_PA_MFC
 #define S5P_PA_SYSCON			EXYNOS4_PA_SYSCON
 #define S5P_PA_TIMER			EXYNOS4_PA_TIMER
 #define S5P_PA_EHCI			EXYNOS4_PA_EHCI

arch/arm/mach-exynos4/include/mach/pm-core.h

@@ -47,3 +47,13 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs,
 {
 	/* nothing here yet */
 }
+
+static inline void s3c_pm_restored_gpios(void)
+{
+	/* nothing here yet */
+}
+
+static inline void s3c_pm_saved_gpios(void)
+{
+	/* nothing here yet */
+}

arch/arm/mach-exynos4/include/mach/pmu.h

+/* linux/arch/arm/mach-exynos4/include/mach/pmu.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * EXYNOS4210 - PMU(Power Management Unit) support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_PMU_H
+#define __ASM_ARCH_PMU_H __FILE__
+
+enum sys_powerdown {
+	SYS_AFTR,
+	SYS_LPA,
+	SYS_SLEEP,
+	NUM_SYS_POWERDOWN,
+};
+
+extern void exynos4_sys_powerdown_conf(enum sys_powerdown mode);
+
+#endif /* __ASM_ARCH_PMU_H */

arch/arm/mach-exynos4/include/mach/regs-audss.h

+/* arch/arm/mach-exynos4/include/mach/regs-audss.h
+ *
+ * Copyright (c) 2011 Samsung Electronics
+ *		http://www.samsung.com
+ *
+ * Exynos4 Audio SubSystem clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_AUDSS_H
+#define __PLAT_REGS_AUDSS_H __FILE__
+
+#define EXYNOS4_AUDSS_INT_MEM	(0x03000000)
+
+#endif /* _PLAT_REGS_AUDSS_H */

arch/arm/mach-exynos4/include/mach/regs-clock.h

@@ -25,6 +25,9 @@
 #define S5P_CLKDIV_STAT_RIGHTBUS	S5P_CLKREG(0x08600)
 #define S5P_CLKGATE_IP_RIGHTBUS		S5P_CLKREG(0x08800)
 
+#define S5P_EPLL_LOCK			S5P_CLKREG(0x0C010)
+#define S5P_VPLL_LOCK			S5P_CLKREG(0x0C020)
+
 #define S5P_EPLL_CON0			S5P_CLKREG(0x0C110)
 #define S5P_EPLL_CON1			S5P_CLKREG(0x0C114)
 #define S5P_VPLL_CON0			S5P_CLKREG(0x0C120)
@@ -33,7 +36,9 @@
 #define S5P_CLKSRC_TOP0			S5P_CLKREG(0x0C210)
 #define S5P_CLKSRC_TOP1			S5P_CLKREG(0x0C214)
 #define S5P_CLKSRC_CAM			S5P_CLKREG(0x0C220)
+#define S5P_CLKSRC_TV			S5P_CLKREG(0x0C224)
 #define S5P_CLKSRC_MFC			S5P_CLKREG(0x0C228)
+#define S5P_CLKSRC_G3D			S5P_CLKREG(0x0C22C)
 #define S5P_CLKSRC_IMAGE		S5P_CLKREG(0x0C230)
 #define S5P_CLKSRC_LCD0			S5P_CLKREG(0x0C234)
 #define S5P_CLKSRC_LCD1			S5P_CLKREG(0x0C238)
@@ -61,6 +66,7 @@
 #define S5P_CLKDIV_PERIL3		S5P_CLKREG(0x0C55C)
 #define S5P_CLKDIV_PERIL4		S5P_CLKREG(0x0C560)
 #define S5P_CLKDIV_PERIL5		S5P_CLKREG(0x0C564)
+#define S5P_CLKDIV2_RATIO		S5P_CLKREG(0x0C580)
 
 #define S5P_CLKSRC_MASK_TOP		S5P_CLKREG(0x0C310)
 #define S5P_CLKSRC_MASK_CAM		S5P_CLKREG(0x0C320)
@@ -120,6 +126,12 @@
 #define S5P_APLL_VAL_1000		((250 << 16) | (6 << 8) | 1)
 #define S5P_APLL_VAL_800		((200 << 16) | (6 << 8) | 1)
 
+#define S5P_EPLLCON0_ENABLE_SHIFT	(31)
+#define S5P_EPLLCON0_LOCKED_SHIFT	(29)
+
+#define S5P_VPLLCON0_ENABLE_SHIFT	(31)
+#define S5P_VPLLCON0_LOCKED_SHIFT	(29)
+
 #define S5P_CLKSRC_CPU_MUXCORE_SHIFT	(16)
 #define S5P_CLKMUX_STATCPU_MUXCORE_MASK	(0x7 << S5P_CLKSRC_CPU_MUXCORE_SHIFT)
 

arch/arm/mach-exynos4/include/mach/regs-pmu.h

@@ -158,6 +158,7 @@
 #define S5P_PMU_GPS_CONF			S5P_PMUREG(0x3CE0)
 
 #define S5P_PMU_SATA_PHY_CONTROL_EN		0x1
+#define S5P_CORE_LOCAL_PWR_EN			0x3
 #define S5P_INT_LOCAL_PWR_EN			0x7
 
 #define S5P_CHECK_SLEEP				0x00000BAD

arch/arm/mach-exynos4/mach-smdkc210.c

@@ -9,7 +9,9 @@
 */
 
 #include <linux/serial_core.h>
+#include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/lcd.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
 #include <linux/smsc911x.h>
@@ -20,11 +22,15 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
+#include <video/platform_lcd.h>
+
 #include <plat/regs-serial.h>
 #include <plat/regs-srom.h>
+#include <plat/regs-fb-v4.h>
 #include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
+#include <plat/fb.h>
 #include <plat/sdhci.h>
 #include <plat/iic.h>
 #include <plat/pd.h>
@@ -114,6 +120,67 @@ static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = {
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };
 
+static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power) {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+		gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
+		gpio_free(EXYNOS4_GPD0(1));
+#endif
+		/* fire nRESET on power up */
+		gpio_request(EXYNOS4_GPX0(6), "GPX0");
+
+		gpio_direction_output(EXYNOS4_GPX0(6), 1);
+		mdelay(100);
+
+		gpio_set_value(EXYNOS4_GPX0(6), 0);
+		mdelay(10);
+
+		gpio_set_value(EXYNOS4_GPX0(6), 1);
+		mdelay(10);
+
+		gpio_free(EXYNOS4_GPX0(6));
+	} else {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+		gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
+		gpio_free(EXYNOS4_GPD0(1));
+#endif
+	}
+}
+
+static struct plat_lcd_data smdkc210_lcd_lte480wv_data = {
+	.set_power		= lcd_lte480wv_set_power,
+};
+
+static struct platform_device smdkc210_lcd_lte480wv = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s5p_device_fimd0.dev,
+	.dev.platform_data	= &smdkc210_lcd_lte480wv_data,
+};
+
+static struct s3c_fb_pd_win smdkc210_fb_win0 = {
+	.win_mode = {
+		.left_margin	= 13,
+		.right_margin	= 8,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp		= 32,
+	.default_bpp		= 24,
+};
+
+static struct s3c_fb_platdata smdkc210_lcd0_pdata __initdata = {
+	.win[0]		= &smdkc210_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
+};
+
 static struct resource smdkc210_smsc911x_resources[] = {
 	[0] = {
 		.start	= EXYNOS4_PA_SROM_BANK(1),
@@ -168,6 +235,8 @@ static struct platform_device *smdkc210_devices[] __initdata = {
 	&exynos4_device_pd[PD_GPS],
 	&exynos4_device_sysmmu,
 	&samsung_asoc_dma,
+	&s5p_device_fimd0,
+	&smdkc210_lcd_lte480wv,
 	&smdkc210_smsc911x,
 };
 
@@ -225,6 +294,7 @@ static void __init smdkc210_machine_init(void)
 	s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata);
 
 	samsung_bl_set(&smdkc210_bl_gpio_info, &smdkc210_bl_data);
+	s5p_fimd0_set_platdata(&smdkc210_lcd0_pdata);
 
 	platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices));
 }

arch/arm/mach-exynos4/mach-smdkv310.c

@@ -184,9 +184,12 @@ static struct platform_device *smdkv310_devices[] __initdata = {
 	&exynos4_device_pd[PD_CAM],
 	&exynos4_device_pd[PD_TV],
 	&exynos4_device_pd[PD_GPS],
+	&exynos4_device_spdif,
 	&exynos4_device_sysmmu,
 	&samsung_asoc_dma,
+	&samsung_asoc_idma,
 	&smdkv310_smsc911x,
+	&exynos4_device_ahci,
 };
 
 static void __init smdkv310_smsc911x_init(void)

arch/arm/mach-exynos4/mach-universal_c210.c

@@ -18,6 +18,9 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/max8952.h>
 #include <linux/mmc/host.h>
+#include <linux/i2c-gpio.h>
+#include <linux/i2c/mcs.h>
+#include <linux/i2c/atmel_mxt_ts.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -27,7 +30,10 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+#include <plat/mfc.h>
 #include <plat/sdhci.h>
+#include <plat/pd.h>
 
 #include <mach/map.h>
 
@@ -477,6 +483,96 @@ static struct i2c_board_info i2c5_devs[] __initdata = {
 	},
 };
 
+/* I2C3 (TSP) */
+static struct mxt_platform_data qt602240_platform_data = {
+	.x_line		= 19,
+	.y_line		= 11,
+	.x_size		= 800,
+	.y_size		= 480,
+	.blen		= 0x11,
+	.threshold	= 0x28,
+	.voltage	= 2800000,		/* 2.8V */
+	.orient		= MXT_DIAGONAL,
+};
+
+static struct i2c_board_info i2c3_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("qt602240_ts", 0x4a),
+		.platform_data = &qt602240_platform_data,
+	},
+};
+
+static void __init universal_tsp_init(void)
+{
+	int gpio;
+
+	/* TSP_LDO_ON: XMDMADDR_11 */
+	gpio = EXYNOS4_GPE2(3);
+	gpio_request(gpio, "TSP_LDO_ON");
+	gpio_direction_output(gpio, 1);
+	gpio_export(gpio, 0);
+
+	/* TSP_INT: XMDMADDR_7 */
+	gpio = EXYNOS4_GPE1(7);
+	gpio_request(gpio, "TSP_INT");
+
+	s5p_register_gpio_interrupt(gpio);
+	s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+	s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+	i2c3_devs[0].irq = gpio_to_irq(gpio);
+}
+
+
+/* GPIO I2C 12 (3 Touchkey) */
+static uint32_t touchkey_keymap[] = {
+	/* MCS_KEY_MAP(value, keycode) */
+	MCS_KEY_MAP(0, KEY_MENU),		/* KEY_SEND */
+	MCS_KEY_MAP(1, KEY_BACK),		/* KEY_END */
+};
+
+static struct mcs_platform_data touchkey_data = {
+	.keymap		= touchkey_keymap,
+	.keymap_size	= ARRAY_SIZE(touchkey_keymap),
+	.key_maxval	= 2,
+};
+
+/* GPIO I2C 3_TOUCH 2.8V */
+#define I2C_GPIO_BUS_12		12
+static struct i2c_gpio_platform_data i2c_gpio12_data = {
+	.sda_pin	= EXYNOS4_GPE4(0),	/* XMDMDATA_8 */
+	.scl_pin	= EXYNOS4_GPE4(1),	/* XMDMDATA_9 */
+};
+
+static struct platform_device i2c_gpio12 = {
+	.name		= "i2c-gpio",
+	.id		= I2C_GPIO_BUS_12,
+	.dev		= {
+		.platform_data	= &i2c_gpio12_data,
+	},
+};
+
+static struct i2c_board_info i2c_gpio12_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("mcs5080_touchkey", 0x20),
+		.platform_data = &touchkey_data,
+	},
+};
+
+static void __init universal_touchkey_init(void)
+{
+	int gpio;
+
+	gpio = EXYNOS4_GPE3(7);			/* XMDMDATA_7 */
+	gpio_request(gpio, "3_TOUCH_INT");
+	s5p_register_gpio_interrupt(gpio);
+	s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+	i2c_gpio12_devs[0].irq = gpio_to_irq(gpio);
+
+	gpio = EXYNOS4_GPE3(3);			/* XMDMDATA_3 */
+	gpio_request(gpio, "3_TOUCH_EN");
+	gpio_direction_output(gpio, 1);
+}
+
 /* GPIO KEYS */
 static struct gpio_keys_button universal_gpio_keys_tables[] = {
 	{
@@ -608,15 +704,25 @@ static struct i2c_board_info i2c1_devs[] __initdata = {
 
 static struct platform_device *universal_devices[] __initdata = {
 	/* Samsung Platform Devices */
+	&s5p_device_fimc0,
+	&s5p_device_fimc1,
+	&s5p_device_fimc2,
+	&s5p_device_fimc3,
 	&mmc0_fixed_voltage,
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc3,
+	&s3c_device_i2c3,
 	&s3c_device_i2c5,
 
 	/* Universal Devices */
+	&i2c_gpio12,
 	&universal_gpio_keys,
 	&s5p_device_onenand,
+	&s5p_device_mfc,
+	&s5p_device_mfc_l,
+	&s5p_device_mfc_r,
+	&exynos4_device_pd[PD_MFC],
 };
 
 static void __init universal_map_io(void)
@@ -626,6 +732,11 @@ static void __init universal_map_io(void)
 	s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
 }
 
+static void __init universal_reserve(void)
+{
+	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
 static void __init universal_machine_init(void)
 {
 	universal_sdhci_init();
@@ -633,11 +744,20 @@ static void __init universal_machine_init(void)
 	i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
 	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
 
+	universal_tsp_init();
+	s3c_i2c3_set_platdata(NULL);
+	i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
+
 	s3c_i2c5_set_platdata(NULL);
 	i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
 
+	universal_touchkey_init();
+	i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
+			ARRAY_SIZE(i2c_gpio12_devs));
+
 	/* Last */
 	platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
+	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
 }
 
 MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
@@ -647,4 +767,5 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
 	.map_io		= universal_map_io,
 	.init_machine	= universal_machine_init,
 	.timer		= &exynos4_timer,
+	.reserve        = &universal_reserve,
 MACHINE_END

arch/arm/mach-exynos4/mct.c

@@ -383,8 +383,8 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt)
 		setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
 	} else {
 		mct_tick1_event_irq.dev_id = &mct_tick[cpu];
-		irq_set_affinity(IRQ_MCT1, cpumask_of(1));
 		setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
+		irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
 	}
 }
 

arch/arm/mach-exynos4/platsmp.c

@@ -28,9 +28,12 @@
 
 #include <mach/hardware.h>
 #include <mach/regs-clock.h>
+#include <mach/regs-pmu.h>
 
 extern void exynos4_secondary_startup(void);
 
+#define CPU1_BOOT_REG S5P_VA_SYSRAM
+
 /*
  * control for which core is the next to come out of the secondary
  * boot "holding pen"
@@ -58,6 +61,31 @@ static void __iomem *scu_base_addr(void)
 
 static DEFINE_SPINLOCK(boot_lock);
 
+static void __cpuinit exynos4_gic_secondary_init(void)
+{
+	void __iomem *dist_base = S5P_VA_GIC_DIST +
+				 (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+	void __iomem *cpu_base = S5P_VA_GIC_CPU +
+				(EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+	int i;
+
+	/*
+	 * Deal with the banked PPI and SGI interrupts - disable all
+	 * PPI interrupts, ensure all SGI interrupts are enabled.
+	 */
+	__raw_writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
+	__raw_writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
+
+	/*
+	 * Set priority on PPI and SGI interrupts
+	 */
+	for (i = 0; i < 32; i += 4)
+		__raw_writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
+
+	__raw_writel(0xf0, cpu_base + GIC_CPU_PRIMASK);
+	__raw_writel(1, cpu_base + GIC_CPU_CTRL);
+}
+
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
 	/*
@@ -65,7 +93,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 * core (e.g. timer irq), then they will not have been enabled
 	 * for us: do so
 	 */
-	gic_secondary_init(0);
+	exynos4_gic_secondary_init();
 
 	/*
 	 * let the primary processor know we're out of the
@@ -100,16 +128,41 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 */
 	write_pen_release(cpu);
 
+	if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) {
+		__raw_writel(S5P_CORE_LOCAL_PWR_EN,
+			     S5P_ARM_CORE1_CONFIGURATION);
+
+		timeout = 10;
+
+		/* wait max 10 ms until cpu1 is on */
+		while ((__raw_readl(S5P_ARM_CORE1_STATUS)
+			& S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN) {
+			if (timeout-- == 0)
+				break;
+
+			mdelay(1);
+		}
+
+		if (timeout == 0) {
+			printk(KERN_ERR "cpu1 power enable failed");
+			spin_unlock(&boot_lock);
+			return -ETIMEDOUT;
+		}
+	}
 	/*
 	 * Send the secondary CPU a soft interrupt, thereby causing
 	 * the boot monitor to read the system wide flags register,
 	 * and branch to the address found there.
 	 */
-	gic_raise_softirq(cpumask_of(cpu), 1);
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
 		smp_rmb();
+
+		__raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)),
+			CPU1_BOOT_REG);
+		gic_raise_softirq(cpumask_of(cpu), 1);
+
 		if (pen_release == -1)
 			break;
 

arch/arm/mach-exynos4/pmu.c

+/* linux/arch/arm/mach-exynos4/pmu.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * EXYNOS4210 - CPU PMU(Power Management Unit) support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+
+#include <mach/regs-clock.h>
+#include <mach/pmu.h>
+
+static void __iomem *sys_powerdown_reg[] = {
+	S5P_ARM_CORE0_LOWPWR,
+	S5P_DIS_IRQ_CORE0,
+	S5P_DIS_IRQ_CENTRAL0,
+	S5P_ARM_CORE1_LOWPWR,
+	S5P_DIS_IRQ_CORE1,
+	S5P_DIS_IRQ_CENTRAL1,
+	S5P_ARM_COMMON_LOWPWR,
+	S5P_L2_0_LOWPWR,
+	S5P_L2_1_LOWPWR,
+	S5P_CMU_ACLKSTOP_LOWPWR,
+	S5P_CMU_SCLKSTOP_LOWPWR,
+	S5P_CMU_RESET_LOWPWR,
+	S5P_APLL_SYSCLK_LOWPWR,
+	S5P_MPLL_SYSCLK_LOWPWR,
+	S5P_VPLL_SYSCLK_LOWPWR,
+	S5P_EPLL_SYSCLK_LOWPWR,
+	S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,
+	S5P_CMU_RESET_GPSALIVE_LOWPWR,
+	S5P_CMU_CLKSTOP_CAM_LOWPWR,
+	S5P_CMU_CLKSTOP_TV_LOWPWR,
+	S5P_CMU_CLKSTOP_MFC_LOWPWR,
+	S5P_CMU_CLKSTOP_G3D_LOWPWR,
+	S5P_CMU_CLKSTOP_LCD0_LOWPWR,
+	S5P_CMU_CLKSTOP_LCD1_LOWPWR,
+	S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,
+	S5P_CMU_CLKSTOP_GPS_LOWPWR,
+	S5P_CMU_RESET_CAM_LOWPWR,
+	S5P_CMU_RESET_TV_LOWPWR,
+	S5P_CMU_RESET_MFC_LOWPWR,
+	S5P_CMU_RESET_G3D_LOWPWR,
+	S5P_CMU_RESET_LCD0_LOWPWR,
+	S5P_CMU_RESET_LCD1_LOWPWR,
+	S5P_CMU_RESET_MAUDIO_LOWPWR,
+	S5P_CMU_RESET_GPS_LOWPWR,
+	S5P_TOP_BUS_LOWPWR,
+	S5P_TOP_RETENTION_LOWPWR,
+	S5P_TOP_PWR_LOWPWR,
+	S5P_LOGIC_RESET_LOWPWR,
+	S5P_ONENAND_MEM_LOWPWR,
+	S5P_MODIMIF_MEM_LOWPWR,
+	S5P_G2D_ACP_MEM_LOWPWR,
+	S5P_USBOTG_MEM_LOWPWR,
+	S5P_HSMMC_MEM_LOWPWR,
+	S5P_CSSYS_MEM_LOWPWR,
+	S5P_SECSS_MEM_LOWPWR,
+	S5P_PCIE_MEM_LOWPWR,
+	S5P_SATA_MEM_LOWPWR,
+	S5P_PAD_RETENTION_DRAM_LOWPWR,
+	S5P_PAD_RETENTION_MAUDIO_LOWPWR,
+	S5P_PAD_RETENTION_GPIO_LOWPWR,
+	S5P_PAD_RETENTION_UART_LOWPWR,
+	S5P_PAD_RETENTION_MMCA_LOWPWR,
+	S5P_PAD_RETENTION_MMCB_LOWPWR,
+	S5P_PAD_RETENTION_EBIA_LOWPWR,
+	S5P_PAD_RETENTION_EBIB_LOWPWR,
+	S5P_PAD_RETENTION_ISOLATION_LOWPWR,
+	S5P_PAD_RETENTION_ALV_SEL_LOWPWR,
+	S5P_XUSBXTI_LOWPWR,
+	S5P_XXTI_LOWPWR,
+	S5P_EXT_REGULATOR_LOWPWR,
+	S5P_GPIO_MODE_LOWPWR,
+	S5P_GPIO_MODE_MAUDIO_LOWPWR,
+	S5P_CAM_LOWPWR,
+	S5P_TV_LOWPWR,
+	S5P_MFC_LOWPWR,
+	S5P_G3D_LOWPWR,
+	S5P_LCD0_LOWPWR,
+	S5P_LCD1_LOWPWR,
+	S5P_MAUDIO_LOWPWR,
+	S5P_GPS_LOWPWR,
+	S5P_GPS_ALIVE_LOWPWR,
+};
+
+static const unsigned int sys_powerdown_val[][NUM_SYS_POWERDOWN] = {
+	/* { AFTR, LPA, SLEEP }*/
+	{ 0, 0, 2 },	/* ARM_CORE0 */
+	{ 0, 0, 0 },	/* ARM_DIS_IRQ_CORE0 */
+	{ 0, 0, 0 },	/* ARM_DIS_IRQ_CENTRAL0 */
+	{ 0, 0, 2 },	/* ARM_CORE1 */
+	{ 0, 0, 0 },	/* ARM_DIS_IRQ_CORE1 */
+	{ 0, 0, 0 },	/* ARM_DIS_IRQ_CENTRAL1 */
+	{ 0, 0, 2 },	/* ARM_COMMON */
+	{ 2, 2, 3 },	/* ARM_CPU_L2_0 */
+	{ 2, 2, 3 },	/* ARM_CPU_L2_1 */
+	{ 1, 0, 0 },	/* CMU_ACLKSTOP */
+	{ 1, 0, 0 },	/* CMU_SCLKSTOP */
+	{ 1, 1, 0 },	/* CMU_RESET */
+	{ 1, 0, 0 },	/* APLL_SYSCLK */
+	{ 1, 0, 0 },	/* MPLL_SYSCLK */
+	{ 1, 0, 0 },	/* VPLL_SYSCLK */
+	{ 1, 1, 0 },	/* EPLL_SYSCLK */
+	{ 1, 1, 0 },	/* CMU_CLKSTOP_GPS_ALIVE */
+	{ 1, 1, 0 },	/* CMU_RESET_GPS_ALIVE */
+	{ 1, 1, 0 },	/* CMU_CLKSTOP_CAM */
+	{ 1, 1, 0 },	/* CMU_CLKSTOP_TV */
+	{ 1, 1, 0 },	/* CMU_CLKSTOP_MFC */
+	{ 1, 1, 0 },	/* CMU_CLKSTOP_G3D */
+	{ 1, 1, 0 },	/* CMU_CLKSTOP_LCD0 */
+	{ 1, 1, 0 },	/* CMU_CLKSTOP_LCD1 */
+	{ 1, 1, 0 },	/* CMU_CLKSTOP_MAUDIO */
+	{ 1, 1, 0 },	/* CMU_CLKSTOP_GPS */
+	{ 1, 1, 0 },	/* CMU_RESET_CAM */
+	{ 1, 1, 0 },	/* CMU_RESET_TV */
+	{ 1, 1, 0 },	/* CMU_RESET_MFC */
+	{ 1, 1, 0 },	/* CMU_RESET_G3D */
+	{ 1, 1, 0 },	/* CMU_RESET_LCD0 */
+	{ 1, 1, 0 },	/* CMU_RESET_LCD1 */
+	{ 1, 1, 0 },	/* CMU_RESET_MAUDIO */
+	{ 1, 1, 0 },	/* CMU_RESET_GPS */
+	{ 3, 0, 0 },	/* TOP_BUS */
+	{ 1, 0, 1 },	/* TOP_RETENTION */
+	{ 3, 0, 3 },	/* TOP_PWR */
+	{ 1, 1, 0 },	/* LOGIC_RESET */
+	{ 3, 0, 0 },	/* ONENAND_MEM */
+	{ 3, 0, 0 },	/* MODIMIF_MEM */
+	{ 3, 0, 0 },	/* G2D_ACP_MEM */
+	{ 3, 0, 0 },	/* USBOTG_MEM */
+	{ 3, 0, 0 },	/* HSMMC_MEM */
+	{ 3, 0, 0 },	/* CSSYS_MEM */
+	{ 3, 0, 0 },	/* SECSS_MEM */
+	{ 3, 0, 0 },	/* PCIE_MEM */
+	{ 3, 0, 0 },	/* SATA_MEM */
+	{ 1, 0, 0 },	/* PAD_RETENTION_DRAM */
+	{ 1, 1, 0 },	/* PAD_RETENTION_MAUDIO */
+	{ 1, 0, 0 },	/* PAD_RETENTION_GPIO */
+	{ 1, 0, 0 },	/* PAD_RETENTION_UART */
+	{ 1, 0, 0 },	/* PAD_RETENTION_MMCA */
+	{ 1, 0, 0 },	/* PAD_RETENTION_MMCB */
+	{ 1, 0, 0 },	/* PAD_RETENTION_EBIA */
+	{ 1, 0, 0 },	/* PAD_RETENTION_EBIB */
+	{ 1, 0, 0 },	/* PAD_RETENTION_ISOLATION */
+	{ 1, 0, 0 },	/* PAD_RETENTION_ALV_SEL */
+	{ 1, 1, 0 },	/* XUSBXTI */
+	{ 1, 1, 0 },	/* XXTI */
+	{ 1, 1, 0 },	/* EXT_REGULATOR */
+	{ 1, 0, 0 },	/* GPIO_MODE */
+	{ 1, 1, 0 },	/* GPIO_MODE_MAUDIO */
+	{ 7, 0, 0 },	/* CAM */
+	{ 7, 0, 0 },	/* TV */
+	{ 7, 0, 0 },	/* MFC */
+	{ 7, 0, 0 },	/* G3D */
+	{ 7, 0, 0 },	/* LCD0 */
+	{ 7, 0, 0 },	/* LCD1 */
+	{ 7, 7, 0 },	/* MAUDIO */
+	{ 7, 0, 0 },	/* GPS */
+	{ 7, 0, 0 },	/* GPS_ALIVE */
+};
+
+void exynos4_sys_powerdown_conf(enum sys_powerdown mode)
+{
+	unsigned int count = ARRAY_SIZE(sys_powerdown_reg);
+
+	for (; count > 0; count--)
+		__raw_writel(sys_powerdown_val[count - 1][mode],
+				sys_powerdown_reg[count - 1]);
+}

arch/arm/mach-exynos4/setup-fimd0.c

+/* linux/arch/arm/mach-exynos4/setup-fimd0.c
+ *
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ *             http://www.samsung.com
+ *
+ * Base Exynos4 FIMD 0 configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/regs-fb-v4.h>
+
+#include <mach/map.h>
+
+void exynos4_fimd0_gpio_setup_24bpp(void)
+{
+	unsigned int reg;
+
+	s3c_gpio_cfgrange_nopull(EXYNOS4_GPF0(0), 8, S3C_GPIO_SFN(2));
+	s3c_gpio_cfgrange_nopull(EXYNOS4_GPF1(0), 8, S3C_GPIO_SFN(2));
+	s3c_gpio_cfgrange_nopull(EXYNOS4_GPF2(0), 8, S3C_GPIO_SFN(2));
+	s3c_gpio_cfgrange_nopull(EXYNOS4_GPF3(0), 4, S3C_GPIO_SFN(2));
+
+	/*
+	 * Set DISPLAY_CONTROL register for Display path selection.
+	 *
+	 * DISPLAY_CONTROL[1:0]
+	 * ---------------------
+	 *  00 | MIE
+	 *  01 | MDINE
+	 *  10 | FIMD : selected
+	 *  11 | FIMD
+	 */
+	reg = __raw_readl(S3C_VA_SYS + 0x0210);
+	reg |= (1 << 1);
+	__raw_writel(reg, S3C_VA_SYS + 0x0210);
+}

arch/arm/mach-exynos4/time.c

-/* linux/arch/arm/mach-exynos4/time.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 (and compatible) HRT support
- * PWM 2/4 is used for this feature
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/clockchips.h>
-#include <linux/platform_device.h>
-
-#include <asm/smp_twd.h>
-
-#include <mach/map.h>
-#include <plat/regs-timer.h>
-#include <asm/mach/time.h>
-
-static unsigned long clock_count_per_tick;
-
-static struct clk *tin2;
-static struct clk *tin4;
-static struct clk *tdiv2;
-static struct clk *tdiv4;
-static struct clk *timerclk;
-
-static void exynos4_pwm_stop(unsigned int pwm_id)
-{
-	unsigned long tcon;
-
-	tcon = __raw_readl(S3C2410_TCON);
-
-	switch (pwm_id) {
-	case 2:
-		tcon &= ~S3C2410_TCON_T2START;
-		break;
-	case 4:
-		tcon &= ~S3C2410_TCON_T4START;
-		break;
-	default:
-		break;
-	}
-	__raw_writel(tcon, S3C2410_TCON);
-}
-
-static void exynos4_pwm_init(unsigned int pwm_id, unsigned long tcnt)
-{
-	unsigned long tcon;
-
-	tcon = __raw_readl(S3C2410_TCON);
-
-	/* timers reload after counting zero, so reduce the count by 1 */
-	tcnt--;
-
-	/* ensure timer is stopped... */
-	switch (pwm_id) {
-	case 2:
-		tcon &= ~(0xf<<12);
-		tcon |= S3C2410_TCON_T2MANUALUPD;
-
-		__raw_writel(tcnt, S3C2410_TCNTB(2));
-		__raw_writel(tcnt, S3C2410_TCMPB(2));
-		__raw_writel(tcon, S3C2410_TCON);
-
-		break;
-	case 4:
-		tcon &= ~(7<<20);
-		tcon |= S3C2410_TCON_T4MANUALUPD;
-
-		__raw_writel(tcnt, S3C2410_TCNTB(4));
-		__raw_writel(tcnt, S3C2410_TCMPB(4));
-		__raw_writel(tcon, S3C2410_TCON);
-
-		break;
-	default:
-		break;
-	}
-}
-
-static inline void exynos4_pwm_start(unsigned int pwm_id, bool periodic)
-{
-	unsigned long tcon;
-
-	tcon  = __raw_readl(S3C2410_TCON);
-
-	switch (pwm_id) {
-	case 2:
-		tcon |= S3C2410_TCON_T2START;
-		tcon &= ~S3C2410_TCON_T2MANUALUPD;
-
-		if (periodic)
-			tcon |= S3C2410_TCON_T2RELOAD;
-		else
-			tcon &= ~S3C2410_TCON_T2RELOAD;
-		break;
-	case 4:
-		tcon |= S3C2410_TCON_T4START;
-		tcon &= ~S3C2410_TCON_T4MANUALUPD;
-
-		if (periodic)
-			tcon |= S3C2410_TCON_T4RELOAD;
-		else
-			tcon &= ~S3C2410_TCON_T4RELOAD;
-		break;
-	default:
-		break;
-	}
-	__raw_writel(tcon, S3C2410_TCON);
-}
-
-static int exynos4_pwm_set_next_event(unsigned long cycles,
-					struct clock_event_device *evt)
-{
-	exynos4_pwm_init(2, cycles);
-	exynos4_pwm_start(2, 0);
-	return 0;
-}
-
-static void exynos4_pwm_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *evt)
-{
-	exynos4_pwm_stop(2);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		exynos4_pwm_init(2, clock_count_per_tick);
-		exynos4_pwm_start(2, 1);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
-}
-
-static struct clock_event_device pwm_event_device = {
-	.name		= "pwm_timer2",
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.rating		= 200,
-	.shift		= 32,
-	.set_next_event	= exynos4_pwm_set_next_event,
-	.set_mode	= exynos4_pwm_set_mode,
-};
-
-irqreturn_t exynos4_clock_event_isr(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &pwm_event_device;
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction exynos4_clock_event_irq = {
-	.name		= "pwm_timer2_irq",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= exynos4_clock_event_isr,
-};
-
-static void __init exynos4_clockevent_init(void)
-{
-	unsigned long pclk;
-	unsigned long clock_rate;
-	struct clk *tscaler;
-
-	pclk = clk_get_rate(timerclk);
-
-	/* configure clock tick */
-
-	tscaler = clk_get_parent(tdiv2);
-
-	clk_set_rate(tscaler, pclk / 2);
-	clk_set_rate(tdiv2, pclk / 2);
-	clk_set_parent(tin2, tdiv2);
-
-	clock_rate = clk_get_rate(tin2);
-
-	clock_count_per_tick = clock_rate / HZ;
-
-	pwm_event_device.mult =
-		div_sc(clock_rate, NSEC_PER_SEC, pwm_event_device.shift);
-	pwm_event_device.max_delta_ns =
-		clockevent_delta2ns(-1, &pwm_event_device);
-	pwm_event_device.min_delta_ns =
-		clockevent_delta2ns(1, &pwm_event_device);
-
-	pwm_event_device.cpumask = cpumask_of(0);
-	clockevents_register_device(&pwm_event_device);
-
-	setup_irq(IRQ_TIMER2, &exynos4_clock_event_irq);
-}
-
-static cycle_t exynos4_pwm4_read(struct clocksource *cs)
-{
-	return (cycle_t) ~__raw_readl(S3C_TIMERREG(0x40));
-}
-
-#ifdef CONFIG_PM
-static void exynos4_pwm4_resume(struct clocksource *cs)
-{
-	unsigned long pclk;
-
-	pclk = clk_get_rate(timerclk);
-
-	clk_set_rate(tdiv4, pclk / 2);
-	clk_set_parent(tin4, tdiv4);
-
-	exynos4_pwm_init(4, ~0);
-	exynos4_pwm_start(4, 1);
-}
-#endif
-
-struct clocksource pwm_clocksource = {
-	.name		= "pwm_timer4",
-	.rating		= 250,
-	.read		= exynos4_pwm4_read,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS ,
-#ifdef CONFIG_PM
-	.resume		= exynos4_pwm4_resume,
-#endif
-};
-
-static void __init exynos4_clocksource_init(void)
-{
-	unsigned long pclk;
-	unsigned long clock_rate;
-
-	pclk = clk_get_rate(timerclk);
-
-	clk_set_rate(tdiv4, pclk / 2);
-	clk_set_parent(tin4, tdiv4);
-
-	clock_rate = clk_get_rate(tin4);
-
-	exynos4_pwm_init(4, ~0);
-	exynos4_pwm_start(4, 1);
-
-	if (clocksource_register_hz(&pwm_clocksource, clock_rate))
-		panic("%s: can't register clocksource\n", pwm_clocksource.name);
-}
-
-static void __init exynos4_timer_resources(void)
-{
-	struct platform_device tmpdev;
-
-	tmpdev.dev.bus = &platform_bus_type;
-
-	timerclk = clk_get(NULL, "timers");
-	if (IS_ERR(timerclk))
-		panic("failed to get timers clock for system timer");
-
-	clk_enable(timerclk);
-
-	tmpdev.id = 2;
-	tin2 = clk_get(&tmpdev.dev, "pwm-tin");
-	if (IS_ERR(tin2))
-		panic("failed to get pwm-tin2 clock for system timer");
-
-	tdiv2 = clk_get(&tmpdev.dev, "pwm-tdiv");
-	if (IS_ERR(tdiv2))
-		panic("failed to get pwm-tdiv2 clock for system timer");
-	clk_enable(tin2);
-
-	tmpdev.id = 4;
-	tin4 = clk_get(&tmpdev.dev, "pwm-tin");
-	if (IS_ERR(tin4))
-		panic("failed to get pwm-tin4 clock for system timer");
-
-	tdiv4 = clk_get(&tmpdev.dev, "pwm-tdiv");
-	if (IS_ERR(tdiv4))
-		panic("failed to get pwm-tdiv4 clock for system timer");
-
-	clk_enable(tin4);
-}
-
-static void __init exynos4_timer_init(void)
-{
-#ifdef CONFIG_LOCAL_TIMERS
-	twd_base = S5P_VA_TWD;
-#endif
-
-	exynos4_timer_resources();
-	exynos4_clockevent_init();
-	exynos4_clocksource_init();
-}
-
-struct sys_timer exynos4_timer = {
-	.init		= exynos4_timer_init,
-};

arch/arm/mach-imx/Kconfig

@@ -278,6 +278,7 @@ config MACH_MX27_3DS
 	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_FB
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_KEYPAD
 	select IMX_HAVE_PLATFORM_IMX_UART

arch/arm/mach-imx/mach-mx27_3ds.c

@@ -29,6 +29,7 @@
 #include <linux/mfd/mc13783.h>
 #include <linux/spi/spi.h>
 #include <linux/regulator/machine.h>
+#include <linux/spi/l4f00242t03.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -47,7 +48,10 @@
 #define SPI2_SS0		IMX_GPIO_NR(4, 21)
 #define EXPIO_PARENT_INT	gpio_to_irq(IMX_GPIO_NR(3, 28))
 #define PMIC_INT		IMX_GPIO_NR(3, 14)
+#define SPI1_SS0		IMX_GPIO_NR(4, 28)
 #define SD1_CD			IMX_GPIO_NR(2, 26)
+#define LCD_RESET		IMX_GPIO_NR(1, 3)
+#define LCD_ENABLE		IMX_GPIO_NR(1, 31)
 
 static const int mx27pdk_pins[] __initconst = {
 	/* UART1 */
@@ -96,6 +100,12 @@ static const int mx27pdk_pins[] __initconst = {
 	PE2_PF_USBOTG_DIR,
 	PE24_PF_USBOTG_CLK,
 	PE25_PF_USBOTG_DATA7,
+	/* CSPI1 */
+	PD31_PF_CSPI1_MOSI,
+	PD30_PF_CSPI1_MISO,
+	PD29_PF_CSPI1_SCLK,
+	PD25_PF_CSPI1_RDY,
+	SPI1_SS0 | GPIO_GPIO | GPIO_OUT,
 	/* CSPI2 */
 	PD22_PF_CSPI2_SCLK,
 	PD23_PF_CSPI2_MISO,
@@ -106,6 +116,31 @@ static const int mx27pdk_pins[] __initconst = {
 	PD18_PF_I2C_CLK,
 	/* PMIC INT */
 	PMIC_INT | GPIO_GPIO | GPIO_IN,
+	/* LCD */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	LCD_ENABLE | GPIO_GPIO | GPIO_OUT,
+	LCD_RESET | GPIO_GPIO | GPIO_OUT,
 };
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
@@ -258,10 +293,18 @@ static struct mc13xxx_platform_data mc13783_pdata = {
 		.num_regulators = ARRAY_SIZE(mx27_3ds_regulators),
 
 	},
-	.flags  = MC13783_USE_REGULATOR,
+	.flags  = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN |
+	MC13783_USE_RTC,
 };
 
 /* SPI */
+static int spi1_chipselect[] = {SPI1_SS0};
+
+static const struct spi_imx_master spi1_pdata __initconst = {
+	.chipselect	= spi1_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi1_chipselect),
+};
+
 static int spi2_chipselect[] = {SPI2_SS0};
 
 static const struct spi_imx_master spi2_pdata __initconst = {
@@ -269,6 +312,46 @@ static const struct spi_imx_master spi2_pdata __initconst = {
 	.num_chipselect	= ARRAY_SIZE(spi2_chipselect),
 };
 
+static struct imx_fb_videomode mx27_3ds_modes[] = {
+	{	/* 480x640 @ 60 Hz */
+		.mode = {
+			.name		= "Epson-VGA",
+			.refresh	= 60,
+			.xres		= 480,
+			.yres		= 640,
+			.pixclock	= 41701,
+			.left_margin	= 20,
+			.right_margin	= 41,
+			.upper_margin	= 10,
+			.lower_margin	= 5,
+			.hsync_len	= 20,
+			.vsync_len	= 10,
+			.sync		= FB_SYNC_OE_ACT_HIGH |
+						FB_SYNC_CLK_INVERT,
+			.vmode		= FB_VMODE_NONINTERLACED,
+			.flag		= 0,
+		},
+		.bpp		= 16,
+		.pcr		= 0xFAC08B82,
+	},
+};
+
+static const struct imx_fb_platform_data mx27_3ds_fb_data __initconst = {
+	.mode = mx27_3ds_modes,
+	.num_modes = ARRAY_SIZE(mx27_3ds_modes),
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020010,
+};
+
+/* LCD */
+static struct l4f00242t03_pdata mx27_3ds_lcd_pdata = {
+	.reset_gpio		= LCD_RESET,
+	.data_enable_gpio	= LCD_ENABLE,
+	.core_supply		= "lcd_2v8",
+	.io_supply		= "vdd_lcdio",
+};
+
 static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
 	{
 		.modalias	= "mc13783",
@@ -278,6 +361,12 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
 		.platform_data	= &mc13783_pdata,
 		.irq = gpio_to_irq(PMIC_INT),
 		.mode = SPI_CS_HIGH,
+	}, {
+		.modalias	= "l4f00242t03",
+		.max_speed_hz	= 5000000,
+		.bus_num	= 0,
+		.chip_select	= 0, /* SS0 */
+		.platform_data	= &mx27_3ds_lcd_pdata,
 	},
 };
 
@@ -311,12 +400,14 @@ static void __init mx27pdk_init(void)
 		imx27_add_fsl_usb2_udc(&otg_device_pdata);
 
 	imx27_add_spi_imx1(&spi2_pdata);
+	imx27_add_spi_imx0(&spi1_pdata);
 	spi_register_board_info(mx27_3ds_spi_devs,
 						ARRAY_SIZE(mx27_3ds_spi_devs));
 
 	if (mxc_expio_init(MX27_CS5_BASE_ADDR, EXPIO_PARENT_INT))
 		pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
 	imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
+	imx27_add_imx_fb(&mx27_3ds_fb_data);
 }
 
 static void __init mx27pdk_timer_init(void)

arch/arm/mach-imx/mm-imx21.c

@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
+#include <mach/devices-common.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
 #include <mach/irqs.h>
@@ -82,4 +83,6 @@ void __init imx21_soc_init(void)
 	mxc_register_gpio("imx21-gpio", 3, MX21_GPIO4_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
 	mxc_register_gpio("imx21-gpio", 4, MX21_GPIO5_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
 	mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
+
+	imx_add_imx_dma();
 }

arch/arm/mach-imx/mm-imx25.c

@@ -24,6 +24,7 @@
 #include <asm/mach/map.h>
 
 #include <mach/common.h>
+#include <mach/devices-common.h>
 #include <mach/hardware.h>
 #include <mach/mx25.h>
 #include <mach/iomux-v3.h>
@@ -61,6 +62,28 @@ void __init mx25_init_irq(void)
 	mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR));
 }
 
+static struct sdma_script_start_addrs imx25_sdma_script __initdata = {
+	.ap_2_ap_addr = 729,
+	.uart_2_mcu_addr = 904,
+	.per_2_app_addr = 1255,
+	.mcu_2_app_addr = 834,
+	.uartsh_2_mcu_addr = 1120,
+	.per_2_shp_addr = 1329,
+	.mcu_2_shp_addr = 1048,
+	.ata_2_mcu_addr = 1560,
+	.mcu_2_ata_addr = 1479,
+	.app_2_per_addr = 1189,
+	.app_2_mcu_addr = 770,
+	.shp_2_per_addr = 1407,
+	.shp_2_mcu_addr = 979,
+};
+
+static struct sdma_platform_data imx25_sdma_pdata __initdata = {
+	.sdma_version = 2,
+	.fw_name = "sdma-imx25.bin",
+	.script_addrs = &imx25_sdma_script,
+};
+
 void __init imx25_soc_init(void)
 {
 	/* i.mx25 has the i.mx31 type gpio */
@@ -68,4 +91,6 @@ void __init imx25_soc_init(void)
 	mxc_register_gpio("imx31-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0);
 	mxc_register_gpio("imx31-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0);
 	mxc_register_gpio("imx31-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0);
+
+	imx_add_imx_sdma(MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata);
 }

arch/arm/mach-imx/mm-imx27.c

@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
+#include <mach/devices-common.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
 #include <mach/irqs.h>
@@ -83,4 +84,6 @@ void __init imx27_soc_init(void)
 	mxc_register_gpio("imx21-gpio", 3, MX27_GPIO4_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
 	mxc_register_gpio("imx21-gpio", 4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
 	mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
+
+	imx_add_imx_dma();
 }

arch/arm/mach-imx/mm-imx31.c

@@ -24,6 +24,7 @@
 #include <asm/mach/map.h>
 
 #include <mach/common.h>
+#include <mach/devices-common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-v3.h>
 #include <mach/irqs.h>
@@ -57,9 +58,35 @@ void __init mx31_init_irq(void)
 	mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
 }
 
+static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
+	.per_2_per_addr = 1677,
+};
+
+static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = {
+	.ap_2_ap_addr = 423,
+	.ap_2_bp_addr = 829,
+	.bp_2_ap_addr = 1029,
+};
+
+static struct sdma_platform_data imx31_sdma_pdata __initdata = {
+	.sdma_version = 1,
+	.fw_name = "sdma-imx31-to2.bin",
+	.script_addrs = &imx31_to2_sdma_script,
+};
+
 void __init imx31_soc_init(void)
 {
+	int to_version = mx31_revision() >> 4;
+
 	mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
 	mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
 	mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
+
+	if (to_version == 1) {
+		strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
+			strlen(imx31_sdma_pdata.fw_name));
+		imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script;
+	}
+
+	imx_add_imx_sdma(MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
 }

arch/arm/mach-imx/mm-imx35.c

@@ -25,6 +25,7 @@
 #include <asm/hardware/cache-l2x0.h>
 
 #include <mach/common.h>
+#include <mach/devices-common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-v3.h>
 #include <mach/irqs.h>
@@ -54,10 +55,56 @@ void __init mx35_init_irq(void)
 	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
 }
 
+static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
+	.ap_2_ap_addr = 642,
+	.uart_2_mcu_addr = 817,
+	.mcu_2_app_addr = 747,
+	.uartsh_2_mcu_addr = 1183,
+	.per_2_shp_addr = 1033,
+	.mcu_2_shp_addr = 961,
+	.ata_2_mcu_addr = 1333,
+	.mcu_2_ata_addr = 1252,
+	.app_2_mcu_addr = 683,
+	.shp_2_per_addr = 1111,
+	.shp_2_mcu_addr = 892,
+};
+
+static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = {
+	.ap_2_ap_addr = 729,
+	.uart_2_mcu_addr = 904,
+	.per_2_app_addr = 1597,
+	.mcu_2_app_addr = 834,
+	.uartsh_2_mcu_addr = 1270,
+	.per_2_shp_addr = 1120,
+	.mcu_2_shp_addr = 1048,
+	.ata_2_mcu_addr = 1429,
+	.mcu_2_ata_addr = 1339,
+	.app_2_per_addr = 1531,
+	.app_2_mcu_addr = 770,
+	.shp_2_per_addr = 1198,
+	.shp_2_mcu_addr = 979,
+};
+
+static struct sdma_platform_data imx35_sdma_pdata __initdata = {
+	.sdma_version = 2,
+	.fw_name = "sdma-imx35-to2.bin",
+	.script_addrs = &imx35_to2_sdma_script,
+};
+
 void __init imx35_soc_init(void)
 {
+	int to_version = mx35_revision() >> 4;
+
 	/* i.mx35 has the i.mx31 type gpio */
 	mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
 	mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
 	mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
+
+	if (to_version == 1) {
+		strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin",
+			strlen(imx35_sdma_pdata.fw_name));
+		imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script;
+	}
+
+	imx_add_imx_sdma(MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
 }

arch/arm/mach-lpc32xx/clock.c

@@ -1077,7 +1077,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand)
 	_REGISTER_CLOCK("tbd", "i2s0_ck", clk_i2s0)
 	_REGISTER_CLOCK("tbd", "i2s1_ck", clk_i2s1)
-	_REGISTER_CLOCK("lpc32xx-ts", NULL, clk_tsc)
+	_REGISTER_CLOCK("ts-lpc32xx", NULL, clk_tsc)
 	_REGISTER_CLOCK("dev:mmc0", "MCLK", clk_mmc)
 	_REGISTER_CLOCK("lpc-net.0", NULL, clk_net)
 	_REGISTER_CLOCK("dev:clcd", NULL, clk_lcd)

arch/arm/mach-lpc32xx/common.c

@@ -95,6 +95,48 @@ struct platform_device lpc32xx_i2c2_device = {
 	},
 };
 
+/* TSC (Touch Screen Controller) */
+
+static struct resource lpc32xx_tsc_resources[] = {
+	{
+		.start = LPC32XX_ADC_BASE,
+		.end = LPC32XX_ADC_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_LPC32XX_TS_IRQ,
+		.end = IRQ_LPC32XX_TS_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device lpc32xx_tsc_device = {
+	.name =  "ts-lpc32xx",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(lpc32xx_tsc_resources),
+	.resource = lpc32xx_tsc_resources,
+};
+
+/* RTC */
+
+static struct resource lpc32xx_rtc_resources[] = {
+	{
+		.start = LPC32XX_RTC_BASE,
+		.end = LPC32XX_RTC_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},{
+		.start = IRQ_LPC32XX_RTC,
+		.end = IRQ_LPC32XX_RTC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device lpc32xx_rtc_device = {
+	.name =  "rtc-lpc32xx",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(lpc32xx_rtc_resources),
+	.resource = lpc32xx_rtc_resources,
+};
+
 /*
  * Returns the unique ID for the device
  */

arch/arm/mach-lpc32xx/common.h

@@ -28,6 +28,8 @@ extern struct platform_device lpc32xx_watchdog_device;
 extern struct platform_device lpc32xx_i2c0_device;
 extern struct platform_device lpc32xx_i2c1_device;
 extern struct platform_device lpc32xx_i2c2_device;
+extern struct platform_device lpc32xx_tsc_device;
+extern struct platform_device lpc32xx_rtc_device;
 
 /*
  * Other arch specific structures and functions

arch/arm/mach-mmp/Kconfig

@@ -77,6 +77,13 @@ config MACH_TETON_BGA
 	  Say 'Y' here if you want to support the Marvell PXA168-based
 	  Teton BGA Development Board.
 
+config MACH_SHEEVAD
+	bool "Marvell's PXA168 GuruPlug Display (gplugD) Board"
+	select CPU_PXA168
+	help
+	  Say 'Y' here if you want to support the Marvell PXA168-based
+	  GuruPlug Display (gplugD) Board
+
 endmenu
 
 config CPU_PXA168

arch/arm/mach-mmp/Makefile

@@ -19,3 +19,4 @@ obj-$(CONFIG_MACH_BROWNSTONE)	+= brownstone.o
 obj-$(CONFIG_MACH_FLINT)	+= flint.o
 obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
 obj-$(CONFIG_MACH_TETON_BGA)	+= teton_bga.o
+obj-$(CONFIG_MACH_SHEEVAD)	+= gplugd.o

arch/arm/mach-mmp/clock.c

@@ -88,3 +88,18 @@ unsigned long clk_get_rate(struct clk *clk)
 	return rate;
 }
 EXPORT_SYMBOL(clk_get_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	if (clk->ops->setrate) {
+		spin_lock_irqsave(&clocks_lock, flags);
+		ret = clk->ops->setrate(clk, rate);
+		spin_unlock_irqrestore(&clocks_lock, flags);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);

arch/arm/mach-mmp/clock.h

@@ -12,6 +12,7 @@ struct clkops {
 	void			(*enable)(struct clk *);
 	void			(*disable)(struct clk *);
 	unsigned long		(*getrate)(struct clk *);
+	int			(*setrate)(struct clk *, unsigned long);
 };
 
 struct clk {

arch/arm/mach-mmp/gplugd.c

+/*
+ *  linux/arch/arm/mach-mmp/gplugd.c
+ *
+ *  Support for the Marvell PXA168-based GuruPlug Display (gplugD) Platform.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/gpio.h>
+#include <mach/pxa168.h>
+#include <mach/mfp-pxa168.h>
+#include <mach/mfp-gplugd.h>
+
+#include "common.h"
+
+static unsigned long gplugd_pin_config[] __initdata = {
+	/* UART3 */
+	GPIO8_UART3_SOUT,
+	GPIO9_UART3_SIN,
+	GPI1O_UART3_CTS,
+	GPI11_UART3_RTS,
+
+	/* MMC2 */
+	GPIO28_MMC2_CMD,
+	GPIO29_MMC2_CLK,
+	GPIO30_MMC2_DAT0,
+	GPIO31_MMC2_DAT1,
+	GPIO32_MMC2_DAT2,
+	GPIO33_MMC2_DAT3,
+
+	/* LCD & HDMI clock selection GPIO: 0: 74.176MHz, 1: 74.25 MHz */
+	GPIO35_GPIO,
+	GPIO36_GPIO, /* CEC Interrupt */
+
+	/* MMC1 */
+	GPIO43_MMC1_CLK,
+	GPIO49_MMC1_CMD,
+	GPIO41_MMC1_DAT0,
+	GPIO40_MMC1_DAT1,
+	GPIO52_MMC1_DAT2,
+	GPIO51_MMC1_DAT3,
+	GPIO53_MMC1_CD,
+
+	/* LCD */
+	GPIO56_LCD_FCLK_RD,
+	GPIO57_LCD_LCLK_A0,
+	GPIO58_LCD_PCLK_WR,
+	GPIO59_LCD_DENA_BIAS,
+	GPIO60_LCD_DD0,
+	GPIO61_LCD_DD1,
+	GPIO62_LCD_DD2,
+	GPIO63_LCD_DD3,
+	GPIO64_LCD_DD4,
+	GPIO65_LCD_DD5,
+	GPIO66_LCD_DD6,
+	GPIO67_LCD_DD7,
+	GPIO68_LCD_DD8,
+	GPIO69_LCD_DD9,
+	GPIO70_LCD_DD10,
+	GPIO71_LCD_DD11,
+	GPIO72_LCD_DD12,
+	GPIO73_LCD_DD13,
+	GPIO74_LCD_DD14,
+	GPIO75_LCD_DD15,
+	GPIO76_LCD_DD16,
+	GPIO77_LCD_DD17,
+	GPIO78_LCD_DD18,
+	GPIO79_LCD_DD19,
+	GPIO80_LCD_DD20,
+	GPIO81_LCD_DD21,
+	GPIO82_LCD_DD22,
+	GPIO83_LCD_DD23,
+
+	/* GPIO */
+	GPIO84_GPIO,
+	GPIO85_GPIO,
+
+	/* Fast-Ethernet*/
+	GPIO86_TX_CLK,
+	GPIO87_TX_EN,
+	GPIO88_TX_DQ3,
+	GPIO89_TX_DQ2,
+	GPIO90_TX_DQ1,
+	GPIO91_TX_DQ0,
+	GPIO92_MII_CRS,
+	GPIO93_MII_COL,
+	GPIO94_RX_CLK,
+	GPIO95_RX_ER,
+	GPIO96_RX_DQ3,
+	GPIO97_RX_DQ2,
+	GPIO98_RX_DQ1,
+	GPIO99_RX_DQ0,
+	GPIO100_MII_MDC,
+	GPIO101_MII_MDIO,
+	GPIO103_RX_DV,
+	GPIO104_GPIO,     /* Reset PHY */
+
+	/* RTC interrupt */
+	GPIO102_GPIO,
+
+	/* I2C */
+	GPIO105_CI2C_SDA,
+	GPIO106_CI2C_SCL,
+
+	/* Select JTAG */
+	GPIO109_GPIO,
+
+	/* I2S */
+	GPIO114_I2S_FRM,
+	GPIO115_I2S_BCLK,
+	GPIO116_I2S_TXD
+};
+
+static struct i2c_board_info gplugd_i2c_board_info[] = {
+	{
+		.type = "isl1208",
+		.addr = 0x6F,
+	}
+};
+
+/* Bring PHY out of reset by setting GPIO 104 */
+static int gplugd_eth_init(void)
+{
+	if (unlikely(gpio_request(104, "ETH_RESET_N"))) {
+		printk(KERN_ERR "Can't get hold of GPIO 104 to bring Ethernet "
+				"PHY out of reset\n");
+		return -EIO;
+	}
+
+	gpio_direction_output(104, 1);
+	gpio_free(104);
+	return 0;
+}
+
+struct pxa168_eth_platform_data gplugd_eth_platform_data = {
+	.port_number = 0,
+	.phy_addr    = 0,
+	.speed       = 0, /* Autonagotiation */
+	.init        = gplugd_eth_init,
+};
+
+static void __init select_disp_freq(void)
+{
+	/* set GPIO 35 & clear GPIO 85 to set LCD External Clock to 74.25 MHz */
+	if (unlikely(gpio_request(35, "DISP_FREQ_SEL"))) {
+		printk(KERN_ERR "Can't get hold of GPIO 35 to select display "
+				"frequency\n");
+	} else {
+		gpio_direction_output(35, 1);
+		gpio_free(104);
+	}
+
+	if (unlikely(gpio_request(85, "DISP_FREQ_SEL_2"))) {
+		printk(KERN_ERR "Can't get hold of GPIO 85 to select display "
+				"frequency\n");
+	} else {
+		gpio_direction_output(85, 0);
+		gpio_free(104);
+	}
+}
+
+static void __init gplugd_init(void)
+{
+	mfp_config(ARRAY_AND_SIZE(gplugd_pin_config));
+
+	select_disp_freq();
+
+	/* on-chip devices */
+	pxa168_add_uart(3);
+	pxa168_add_ssp(0);
+	pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
+
+	pxa168_add_eth(&gplugd_eth_platform_data);
+}
+
+MACHINE_START(SHEEVAD, "PXA168-based GuruPlug Display (gplugD) Platform")
+	.map_io		= mmp_map_io,
+	.nr_irqs	= IRQ_BOARD_START,
+	.init_irq       = pxa168_init_irq,
+	.timer          = &pxa168_timer,
+	.init_machine   = gplugd_init,
+MACHINE_END

arch/arm/mach-mmp/include/mach/mfp-gplugd.h

+/*
+ * linux/arch/arm/mach-mmp/include/mach/mfp-gplugd.h
+ *
+ *   MFP definitions used in gplugD
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_MFP_GPLUGD_H
+#define __MACH_MFP_GPLUGD_H
+
+#include <plat/mfp.h>
+#include <mach/mfp.h>
+
+/* UART3 */
+#define GPIO8_UART3_SOUT       MFP_CFG(GPIO8, AF2)
+#define GPIO9_UART3_SIN        MFP_CFG(GPIO9, AF2)
+#define GPI1O_UART3_CTS        MFP_CFG(GPIO10, AF2)
+#define GPI11_UART3_RTS        MFP_CFG(GPIO11, AF2)
+
+/* MMC2 */
+#define	GPIO28_MMC2_CMD		MFP_CFG_DRV(GPIO28, AF6, FAST)
+#define	GPIO29_MMC2_CLK		MFP_CFG_DRV(GPIO29, AF6, FAST)
+#define	GPIO30_MMC2_DAT0	MFP_CFG_DRV(GPIO30, AF6, FAST)
+#define	GPIO31_MMC2_DAT1	MFP_CFG_DRV(GPIO31, AF6, FAST)
+#define	GPIO32_MMC2_DAT2	MFP_CFG_DRV(GPIO32, AF6, FAST)
+#define	GPIO33_MMC2_DAT3	MFP_CFG_DRV(GPIO33, AF6, FAST)
+
+/* I2S */
+#undef GPIO114_I2S_FRM
+#undef GPIO115_I2S_BCLK
+
+#define GPIO114_I2S_FRM	        MFP_CFG_DRV(GPIO114, AF1, FAST)
+#define GPIO115_I2S_BCLK        MFP_CFG_DRV(GPIO115, AF1, FAST)
+#define GPIO116_I2S_TXD         MFP_CFG_DRV(GPIO116, AF1, FAST)
+
+/* MMC4 */
+#define GPIO125_MMC4_DAT3       MFP_CFG_DRV(GPIO125, AF7, FAST)
+#define GPIO126_MMC4_DAT2       MFP_CFG_DRV(GPIO126, AF7, FAST)
+#define GPIO127_MMC4_DAT1       MFP_CFG_DRV(GPIO127, AF7, FAST)
+#define GPIO0_2_MMC4_DAT0       MFP_CFG_DRV(GPIO0_2, AF7, FAST)
+#define GPIO1_2_MMC4_CMD        MFP_CFG_DRV(GPIO1_2, AF7, FAST)
+#define GPIO2_2_MMC4_CLK        MFP_CFG_DRV(GPIO2_2, AF7, FAST)
+
+/* OTG GPIO */
+#define GPIO_USB_OTG_PEN        18
+#define GPIO_USB_OIDIR          20
+
+/* Other GPIOs are 35, 84, 85 */
+#endif /* __MACH_MFP_GPLUGD_H */

arch/arm/mach-mmp/include/mach/mfp-pxa168.h

@@ -305,4 +305,23 @@
 #define GPIO112_KP_MKOUT6       MFP_CFG(GPIO112, AF7)
 #define GPIO121_KP_MKIN4        MFP_CFG(GPIO121, AF7)
 
+/* Fast Ethernet */
+#define GPIO86_TX_CLK		MFP_CFG(GPIO86, AF5)
+#define GPIO87_TX_EN		MFP_CFG(GPIO87, AF5)
+#define GPIO88_TX_DQ3		MFP_CFG(GPIO88, AF5)
+#define GPIO89_TX_DQ2		MFP_CFG(GPIO89, AF5)
+#define GPIO90_TX_DQ1		MFP_CFG(GPIO90, AF5)
+#define GPIO91_TX_DQ0		MFP_CFG(GPIO91, AF5)
+#define GPIO92_MII_CRS		MFP_CFG(GPIO92, AF5)
+#define GPIO93_MII_COL		MFP_CFG(GPIO93, AF5)
+#define GPIO94_RX_CLK		MFP_CFG(GPIO94, AF5)
+#define GPIO95_RX_ER		MFP_CFG(GPIO95, AF5)
+#define GPIO96_RX_DQ3		MFP_CFG(GPIO96, AF5)
+#define GPIO97_RX_DQ2		MFP_CFG(GPIO97, AF5)
+#define GPIO98_RX_DQ1		MFP_CFG(GPIO98, AF5)
+#define GPIO99_RX_DQ0		MFP_CFG(GPIO99, AF5)
+#define GPIO100_MII_MDC		MFP_CFG(GPIO100, AF5)
+#define GPIO101_MII_MDIO	MFP_CFG(GPIO101, AF5)
+#define GPIO103_RX_DV		MFP_CFG(GPIO103, AF5)
+
 #endif /* __ASM_MACH_MFP_PXA168_H */

arch/arm/mach-mmp/include/mach/pxa168.h

@@ -14,9 +14,11 @@ extern void pxa168_clear_keypad_wakeup(void);
 #include <video/pxa168fb.h>
 #include <plat/pxa27x_keypad.h>
 #include <mach/cputype.h>
+#include <linux/pxa168_eth.h>
 
 extern struct pxa_device_desc pxa168_device_uart1;
 extern struct pxa_device_desc pxa168_device_uart2;
+extern struct pxa_device_desc pxa168_device_uart3;
 extern struct pxa_device_desc pxa168_device_twsi0;
 extern struct pxa_device_desc pxa168_device_twsi1;
 extern struct pxa_device_desc pxa168_device_pwm1;
@@ -31,6 +33,7 @@ extern struct pxa_device_desc pxa168_device_ssp5;
 extern struct pxa_device_desc pxa168_device_nand;
 extern struct pxa_device_desc pxa168_device_fb;
 extern struct pxa_device_desc pxa168_device_keypad;
+extern struct pxa_device_desc pxa168_device_eth;
 
 static inline int pxa168_add_uart(int id)
 {
@@ -39,6 +42,7 @@ static inline int pxa168_add_uart(int id)
 	switch (id) {
 	case 1: d = &pxa168_device_uart1; break;
 	case 2: d = &pxa168_device_uart2; break;
+	case 3: d = &pxa168_device_uart3; break;
 	}
 
 	if (d == NULL)
@@ -117,4 +121,8 @@ static inline int pxa168_add_keypad(struct pxa27x_keypad_platform_data *data)
 	return pxa_register_device(&pxa168_device_keypad, data, sizeof(*data));
 }
 
+static inline int pxa168_add_eth(struct pxa168_eth_platform_data *data)
+{
+	return pxa_register_device(&pxa168_device_eth, data, sizeof(*data));
+}
 #endif /* __ASM_MACH_PXA168_H */

arch/arm/mach-mmp/include/mach/regs-apmu.h

@@ -29,6 +29,7 @@
 #define APMU_BUS	APMU_REG(0x06c)
 #define APMU_SDH2	APMU_REG(0x0e8)
 #define APMU_SDH3	APMU_REG(0x0ec)
+#define APMU_ETH	APMU_REG(0x0fc)
 
 #define APMU_FNCLK_EN	(1 << 4)
 #define APMU_AXICLK_EN	(1 << 3)

arch/arm/mach-mmp/pxa168.c

@@ -66,6 +66,7 @@ void __init pxa168_init_irq(void)
 /* APB peripheral clocks */
 static APBC_CLK(uart1, PXA168_UART1, 1, 14745600);
 static APBC_CLK(uart2, PXA168_UART2, 1, 14745600);
+static APBC_CLK(uart3, PXA168_UART3, 1, 14745600);
 static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
 static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
 static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000);
@@ -81,11 +82,13 @@ static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
 
 static APMU_CLK(nand, NAND, 0x19b, 156000000);
 static APMU_CLK(lcd, LCD, 0x7f, 312000000);
+static APMU_CLK(eth, ETH, 0x09, 0);
 
 /* device and clock bindings */
 static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
 	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+	INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
 	INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
 	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
 	INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL),
@@ -100,6 +103,7 @@ static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
 	INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
 	INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
+	INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
 };
 
 static int __init pxa168_init(void)
@@ -149,6 +153,7 @@ void pxa168_clear_keypad_wakeup(void)
 /* on-chip devices */
 PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
 PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
+PXA168_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4026000, 0x30, 23, 24);
 PXA168_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
 PXA168_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
 PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10);
@@ -163,3 +168,4 @@ PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59);
 PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);
 PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
 PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c);
+PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff);

arch/arm/mach-mmp/ttc_dkb.c

@@ -15,6 +15,8 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/onenand.h>
 #include <linux/interrupt.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -25,7 +27,17 @@
 
 #include "common.h"
 
-#define TTCDKB_NR_IRQS		(IRQ_BOARD_START + 24)
+#define TTCDKB_GPIO_EXT0(x)	(NR_BUILTIN_GPIO + ((x < 0) ? 0 :	\
+				((x < 16) ? x : 15)))
+#define TTCDKB_GPIO_EXT1(x)	(NR_BUILTIN_GPIO + 16 + ((x < 0) ? 0 :	\
+				((x < 16) ? x : 15)))
+
+/*
+ * 16 board interrupts -- MAX7312 GPIO expander
+ * 16 board interrupts -- PCA9575 GPIO expander
+ * 24 board interrupts -- 88PM860x PMIC
+ */
+#define TTCDKB_NR_IRQS		(IRQ_BOARD_START + 16 + 16 + 24)
 
 static unsigned long ttc_dkb_pin_config[] __initdata = {
 	/* UART2 */
@@ -113,6 +125,22 @@ static struct platform_device *ttc_dkb_devices[] = {
 	&ttc_dkb_device_onenand,
 };
 
+static struct pca953x_platform_data max7312_data[] = {
+	{
+		.gpio_base	= TTCDKB_GPIO_EXT0(0),
+		.irq_base	= IRQ_BOARD_START,
+	},
+};
+
+static struct i2c_board_info ttc_dkb_i2c_info[] = {
+	{
+		.type		= "max7312",
+		.addr		= 0x23,
+		.irq		= IRQ_GPIO(80),
+		.platform_data	= &max7312_data,
+	},
+};
+
 static void __init ttc_dkb_init(void)
 {
 	mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config));
@@ -121,6 +149,7 @@ static void __init ttc_dkb_init(void)
 	pxa910_add_uart(1);
 
 	/* off-chip devices */
+	pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info));
 	platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
 }
 

arch/arm/mach-mx5/Kconfig

@@ -180,6 +180,7 @@ config MACH_MX53_EVK
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select IMX_HAVE_PLATFORM_SPI_IMX
+	select LEDS_GPIO_REGISTER
 	help
 	  Include support for MX53 EVK platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -203,10 +204,23 @@ config MACH_MX53_LOCO
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select LEDS_GPIO_REGISTER
 	help
 	  Include support for MX53 LOCO platform. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_MX53_ARD
+	bool "Support MX53 ARD platforms"
+	select SOC_IMX53
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	help
+	  Include support for MX53 ARD platform. This includes specific
+	  configurations for the board and its peripherals.
+
 endif # ARCH_MX53_SUPPORTED
 
 endif

arch/arm/mach-mx5/Makefile

@@ -6,12 +6,14 @@
 obj-y   := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o system.o
 obj-$(CONFIG_SOC_IMX50) += mm-mx50.o
 
+obj-$(CONFIG_PM) += pm-imx5.o
 obj-$(CONFIG_CPU_FREQ_IMX)    += cpu_op-mx51.o
 obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
 obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
 obj-$(CONFIG_MACH_MX53_EVK) += board-mx53_evk.o
 obj-$(CONFIG_MACH_MX53_SMD) += board-mx53_smd.o
 obj-$(CONFIG_MACH_MX53_LOCO) += board-mx53_loco.o
+obj-$(CONFIG_MACH_MX53_ARD) += board-mx53_ard.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o
 obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o

arch/arm/mach-mx5/board-mx51_babbage.c

@@ -41,6 +41,10 @@
 #define BABBAGE_POWER_KEY	IMX_GPIO_NR(2, 21)
 #define BABBAGE_ECSPI1_CS0	IMX_GPIO_NR(4, 24)
 #define BABBAGE_ECSPI1_CS1	IMX_GPIO_NR(4, 25)
+#define BABBAGE_SD1_CD		IMX_GPIO_NR(1, 0)
+#define BABBAGE_SD1_WP		IMX_GPIO_NR(1, 1)
+#define BABBAGE_SD2_CD		IMX_GPIO_NR(1, 6)
+#define BABBAGE_SD2_WP		IMX_GPIO_NR(1, 5)
 
 /* USB_CTRL_1 */
 #define MX51_USB_CTRL_1_OFFSET			0x10
@@ -142,6 +146,8 @@ static iomux_v3_cfg_t mx51babbage_pads[] = {
 	MX51_PAD_SD1_DATA1__SD1_DATA1,
 	MX51_PAD_SD1_DATA2__SD1_DATA2,
 	MX51_PAD_SD1_DATA3__SD1_DATA3,
+	MX51_PAD_GPIO1_0__GPIO1_0,
+	MX51_PAD_GPIO1_1__GPIO1_1,
 
 	/* SD 2 */
 	MX51_PAD_SD2_CMD__SD2_CMD,
@@ -150,6 +156,8 @@ static iomux_v3_cfg_t mx51babbage_pads[] = {
 	MX51_PAD_SD2_DATA1__SD2_DATA1,
 	MX51_PAD_SD2_DATA2__SD2_DATA2,
 	MX51_PAD_SD2_DATA3__SD2_DATA3,
+	MX51_PAD_GPIO1_6__GPIO1_6,
+	MX51_PAD_GPIO1_5__GPIO1_5,
 
 	/* eCSPI1 */
 	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
@@ -331,6 +339,16 @@ static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = {
 	.num_chipselect = ARRAY_SIZE(mx51_babbage_spi_cs),
 };
 
+static const struct esdhc_platform_data mx51_babbage_sd1_data __initconst = {
+	.cd_gpio = BABBAGE_SD1_CD,
+	.wp_gpio = BABBAGE_SD1_WP,
+};
+
+static const struct esdhc_platform_data mx51_babbage_sd2_data __initconst = {
+	.cd_gpio = BABBAGE_SD2_CD,
+	.wp_gpio = BABBAGE_SD2_WP,
+};
+
 /*
  * Board specific initialization.
  */
@@ -376,8 +394,8 @@ static void __init mx51_babbage_init(void)
 	mxc_iomux_v3_setup_pad(usbh1stp);
 	babbage_usbhub_reset();
 
-	imx51_add_sdhci_esdhc_imx(0, NULL);
-	imx51_add_sdhci_esdhc_imx(1, NULL);
+	imx51_add_sdhci_esdhc_imx(0, &mx51_babbage_sd1_data);
+	imx51_add_sdhci_esdhc_imx(1, &mx51_babbage_sd2_data);
 
 	spi_register_board_info(mx51_babbage_spi_board_info,
 		ARRAY_SIZE(mx51_babbage_spi_board_info));

arch/arm/mach-mx5/board-mx53_ard.c

+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx53.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "crm_regs.h"
+#include "devices-imx53.h"
+
+#define ARD_ETHERNET_INT_B	IMX_GPIO_NR(2, 31)
+#define ARD_SD1_CD		IMX_GPIO_NR(1, 1)
+#define ARD_SD1_WP		IMX_GPIO_NR(1, 9)
+#define ARD_I2CPORTEXP_B	IMX_GPIO_NR(2, 3)
+#define ARD_VOLUMEDOWN		IMX_GPIO_NR(4, 0)
+#define ARD_HOME			IMX_GPIO_NR(5, 10)
+#define ARD_BACK			IMX_GPIO_NR(5, 11)
+#define ARD_PROG			IMX_GPIO_NR(5, 12)
+#define ARD_VOLUMEUP		IMX_GPIO_NR(5, 13)
+
+static iomux_v3_cfg_t mx53_ard_pads[] = {
+	/* UART1 */
+	MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
+	MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
+	/* WEIM for CS1 */
+	MX53_PAD_EIM_EB3__GPIO2_31, /* ETHERNET_INT_B */
+	MX53_PAD_EIM_D16__EMI_WEIM_D_16,
+	MX53_PAD_EIM_D17__EMI_WEIM_D_17,
+	MX53_PAD_EIM_D18__EMI_WEIM_D_18,
+	MX53_PAD_EIM_D19__EMI_WEIM_D_19,
+	MX53_PAD_EIM_D20__EMI_WEIM_D_20,
+	MX53_PAD_EIM_D21__EMI_WEIM_D_21,
+	MX53_PAD_EIM_D22__EMI_WEIM_D_22,
+	MX53_PAD_EIM_D23__EMI_WEIM_D_23,
+	MX53_PAD_EIM_D24__EMI_WEIM_D_24,
+	MX53_PAD_EIM_D25__EMI_WEIM_D_25,
+	MX53_PAD_EIM_D26__EMI_WEIM_D_26,
+	MX53_PAD_EIM_D27__EMI_WEIM_D_27,
+	MX53_PAD_EIM_D28__EMI_WEIM_D_28,
+	MX53_PAD_EIM_D29__EMI_WEIM_D_29,
+	MX53_PAD_EIM_D30__EMI_WEIM_D_30,
+	MX53_PAD_EIM_D31__EMI_WEIM_D_31,
+	MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0,
+	MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1,
+	MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2,
+	MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3,
+	MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4,
+	MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5,
+	MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6,
+	MX53_PAD_EIM_OE__EMI_WEIM_OE,
+	MX53_PAD_EIM_RW__EMI_WEIM_RW,
+	MX53_PAD_EIM_CS1__EMI_WEIM_CS_1,
+	/* SDHC1 */
+	MX53_PAD_SD1_CMD__ESDHC1_CMD,
+	MX53_PAD_SD1_CLK__ESDHC1_CLK,
+	MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
+	MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
+	MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
+	MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
+	MX53_PAD_PATA_DATA8__ESDHC1_DAT4,
+	MX53_PAD_PATA_DATA9__ESDHC1_DAT5,
+	MX53_PAD_PATA_DATA10__ESDHC1_DAT6,
+	MX53_PAD_PATA_DATA11__ESDHC1_DAT7,
+	MX53_PAD_GPIO_1__GPIO1_1,
+	MX53_PAD_GPIO_9__GPIO1_9,
+	/* I2C2 */
+	MX53_PAD_EIM_EB2__I2C2_SCL,
+	MX53_PAD_KEY_ROW3__I2C2_SDA,
+	/* I2C3 */
+	MX53_PAD_GPIO_3__I2C3_SCL,
+	MX53_PAD_GPIO_16__I2C3_SDA,
+	/* GPIO */
+	MX53_PAD_DISP0_DAT16__GPIO5_10,	/* home */
+	MX53_PAD_DISP0_DAT17__GPIO5_11,	/* back */
+	MX53_PAD_DISP0_DAT18__GPIO5_12,	/* prog */
+	MX53_PAD_DISP0_DAT19__GPIO5_13,	/* vol up */
+	MX53_PAD_GPIO_10__GPIO4_0,		/* vol down */
+};
+
+#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake)	\
+{							\
+	.gpio		= gpio_num,				\
+	.type		= EV_KEY,				\
+	.code		= ev_code,				\
+	.active_low	= act_low,				\
+	.desc		= "btn " descr,			\
+	.wakeup		= wake,					\
+}
+
+static struct gpio_keys_button ard_buttons[] = {
+	GPIO_BUTTON(ARD_HOME, KEY_HOME, 1, "home", 0),
+	GPIO_BUTTON(ARD_BACK, KEY_BACK, 1, "back", 0),
+	GPIO_BUTTON(ARD_PROG, KEY_PROGRAM, 1, "program", 0),
+	GPIO_BUTTON(ARD_VOLUMEUP, KEY_VOLUMEUP, 1, "volume-up", 0),
+	GPIO_BUTTON(ARD_VOLUMEDOWN, KEY_VOLUMEDOWN, 1, "volume-down", 0),
+};
+
+static const struct gpio_keys_platform_data ard_button_data __initconst = {
+	.buttons        = ard_buttons,
+	.nbuttons       = ARRAY_SIZE(ard_buttons),
+};
+
+static struct resource ard_smsc911x_resources[] = {
+	{
+		.start = MX53_CS1_64MB_BASE_ADDR,
+		.end = MX53_CS1_64MB_BASE_ADDR + SZ_32M - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start =  gpio_to_irq(ARD_ETHERNET_INT_B),
+		.end =  gpio_to_irq(ARD_ETHERNET_INT_B),
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct smsc911x_platform_config ard_smsc911x_config = {
+	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags = SMSC911X_USE_32BIT,
+};
+
+static struct platform_device ard_smsc_lan9220_device = {
+	.name = "smsc911x",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(ard_smsc911x_resources),
+	.resource = ard_smsc911x_resources,
+	.dev = {
+		.platform_data = &ard_smsc911x_config,
+	},
+};
+
+static const struct esdhc_platform_data mx53_ard_sd1_data __initconst = {
+	.cd_gpio = ARD_SD1_CD,
+	.wp_gpio = ARD_SD1_WP,
+};
+
+static struct imxi2c_platform_data mx53_ard_i2c2_data = {
+	.bitrate = 50000,
+};
+
+static struct imxi2c_platform_data mx53_ard_i2c3_data = {
+	.bitrate = 400000,
+};
+
+static void __init mx53_ard_io_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads,
+				ARRAY_SIZE(mx53_ard_pads));
+
+	gpio_request(ARD_ETHERNET_INT_B, "eth-int-b");
+	gpio_direction_input(ARD_ETHERNET_INT_B);
+
+	gpio_request(ARD_I2CPORTEXP_B, "i2cptexp-rst");
+	gpio_direction_output(ARD_I2CPORTEXP_B, 1);
+}
+
+/* Config CS1 settings for ethernet controller */
+static int weim_cs_config(void)
+{
+	u32 reg;
+	void __iomem *weim_base, *iomuxc_base;
+
+	weim_base = ioremap(MX53_WEIM_BASE_ADDR, SZ_4K);
+	if (!weim_base)
+		return -ENOMEM;
+
+	iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K);
+	if (!iomuxc_base)
+		return -ENOMEM;
+
+	/* CS1 timings for LAN9220 */
+	writel(0x20001, (weim_base + 0x18));
+	writel(0x0, (weim_base + 0x1C));
+	writel(0x16000202, (weim_base + 0x20));
+	writel(0x00000002, (weim_base + 0x24));
+	writel(0x16002082, (weim_base + 0x28));
+	writel(0x00000000, (weim_base + 0x2C));
+	writel(0x00000000, (weim_base + 0x90));
+
+	/* specify 64 MB on CS1 and CS0 on GPR1 */
+	reg = readl(iomuxc_base + 0x4);
+	reg &= ~0x3F;
+	reg |= 0x1B;
+	writel(reg, (iomuxc_base + 0x4));
+
+	iounmap(iomuxc_base);
+	iounmap(weim_base);
+
+	return 0;
+}
+
+static struct platform_device *devices[] __initdata = {
+	&ard_smsc_lan9220_device,
+};
+
+static void __init mx53_ard_board_init(void)
+{
+	imx53_soc_init();
+	imx53_add_imx_uart(0, NULL);
+
+	mx53_ard_io_init();
+	weim_cs_config();
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data);
+	imx53_add_imx2_wdt(0, NULL);
+	imx53_add_imx_i2c(1, &mx53_ard_i2c2_data);
+	imx53_add_imx_i2c(2, &mx53_ard_i2c3_data);
+	imx_add_gpio_keys(&ard_button_data);
+}
+
+static void __init mx53_ard_timer_init(void)
+{
+	mx53_clocks_init(32768, 24000000, 22579200, 0);
+}
+
+static struct sys_timer mx53_ard_timer = {
+	.init	= mx53_ard_timer_init,
+};
+
+MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board")
+	.map_io = mx53_map_io,
+	.init_early = imx53_init_early,
+	.init_irq = mx53_init_irq,
+	.timer = &mx53_ard_timer,
+	.init_machine = mx53_ard_board_init,
+MACHINE_END

arch/arm/mach-mx5/board-mx53_evk.c

@@ -35,6 +35,7 @@
 #define MX53_EVK_FEC_PHY_RST	IMX_GPIO_NR(7, 6)
 #define EVK_ECSPI1_CS0		IMX_GPIO_NR(2, 30)
 #define EVK_ECSPI1_CS1		IMX_GPIO_NR(3, 19)
+#define MX53EVK_LED		IMX_GPIO_NR(7, 7)
 
 #include "crm_regs.h"
 #include "devices-imx53.h"
@@ -58,12 +59,27 @@ static iomux_v3_cfg_t mx53_evk_pads[] = {
 	/* ecspi chip select lines */
 	MX53_PAD_EIM_EB2__GPIO2_30,
 	MX53_PAD_EIM_D19__GPIO3_19,
+	/* LED */
+	MX53_PAD_PATA_DA_1__GPIO7_7,
 };
 
 static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
+static const struct gpio_led mx53evk_leds[] __initconst = {
+	{
+		.name			= "green",
+		.default_trigger	= "heartbeat",
+		.gpio			= MX53EVK_LED,
+	},
+};
+
+static const struct gpio_led_platform_data mx53evk_leds_data __initconst = {
+	.leds		= mx53evk_leds,
+	.num_leds	= ARRAY_SIZE(mx53evk_leds),
+};
+
 static inline void mx53_evk_init_uart(void)
 {
 	imx53_add_imx_uart(0, NULL);
@@ -135,6 +151,7 @@ static void __init mx53_evk_board_init(void)
 		ARRAY_SIZE(mx53_evk_spi_board_info));
 	imx53_add_ecspi(0, &mx53_evk_spi_data);
 	imx53_add_imx2_wdt(0, NULL);
+	gpio_led_register_device(-1, &mx53evk_leds_data);
 }
 
 static void __init mx53_evk_timer_init(void)

arch/arm/mach-mx5/board-mx53_loco.c

@@ -38,6 +38,10 @@
 #define MX53_LOCO_UI1			IMX_GPIO_NR(2, 14)
 #define MX53_LOCO_UI2			IMX_GPIO_NR(2, 15)
 #define LOCO_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
+#define LOCO_LED			IMX_GPIO_NR(7, 7)
+#define LOCO_SD3_CD			IMX_GPIO_NR(3, 11)
+#define LOCO_SD3_WP			IMX_GPIO_NR(3, 12)
+#define LOCO_SD1_CD			IMX_GPIO_NR(3, 13)
 
 static iomux_v3_cfg_t mx53_loco_pads[] = {
 	/* FEC */
@@ -70,6 +74,8 @@ static iomux_v3_cfg_t mx53_loco_pads[] = {
 	MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
 	MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
 	MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
+	/* SD1_CD */
+	MX53_PAD_EIM_DA13__GPIO3_13,
 	/* SD3 */
 	MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
 	MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
@@ -163,7 +169,7 @@ static iomux_v3_cfg_t mx53_loco_pads[] = {
 	MX53_PAD_GPIO_7__SPDIF_PLOCK,
 	MX53_PAD_GPIO_17__SPDIF_OUT1,
 	/* GPIO */
-	MX53_PAD_PATA_DA_1__GPIO7_7,
+	MX53_PAD_PATA_DA_1__GPIO7_7,		/* LED */
 	MX53_PAD_PATA_DA_2__GPIO7_8,
 	MX53_PAD_PATA_DATA5__GPIO2_5,
 	MX53_PAD_PATA_DATA6__GPIO2_6,
@@ -202,6 +208,15 @@ static const struct gpio_keys_platform_data loco_button_data __initconst = {
 	.nbuttons       = ARRAY_SIZE(loco_buttons),
 };
 
+static const struct esdhc_platform_data mx53_loco_sd1_data __initconst = {
+	.cd_gpio = LOCO_SD1_CD,
+};
+
+static const struct esdhc_platform_data mx53_loco_sd3_data __initconst = {
+	.cd_gpio = LOCO_SD3_CD,
+	.wp_gpio = LOCO_SD3_WP,
+};
+
 static inline void mx53_loco_fec_reset(void)
 {
 	int ret;
@@ -225,6 +240,19 @@ static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = {
 	.bitrate = 100000,
 };
 
+static const struct gpio_led mx53loco_leds[] __initconst = {
+	{
+		.name			= "green",
+		.default_trigger	= "heartbeat",
+		.gpio			= LOCO_LED,
+	},
+};
+
+static const struct gpio_led_platform_data mx53loco_leds_data __initconst = {
+	.leds		= mx53loco_leds,
+	.num_leds	= ARRAY_SIZE(mx53loco_leds),
+};
+
 static void __init mx53_loco_board_init(void)
 {
 	imx53_soc_init();
@@ -237,9 +265,10 @@ static void __init mx53_loco_board_init(void)
 	imx53_add_imx2_wdt(0, NULL);
 	imx53_add_imx_i2c(0, &mx53_loco_i2c_data);
 	imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
-	imx53_add_sdhci_esdhc_imx(0, NULL);
-	imx53_add_sdhci_esdhc_imx(2, NULL);
+	imx53_add_sdhci_esdhc_imx(0, &mx53_loco_sd1_data);
+	imx53_add_sdhci_esdhc_imx(2, &mx53_loco_sd3_data);
 	imx_add_gpio_keys(&loco_button_data);
+	gpio_led_register_device(-1, &mx53loco_leds_data);
 }
 
 static void __init mx53_loco_timer_init(void)

arch/arm/mach-mx5/clock-mx51-mx53.c

@@ -1254,12 +1254,20 @@ DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET,
 	NULL,  NULL, &ipg_clk, &aips_tz1_clk);
 DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET,
 	NULL,  NULL, &ipg_clk, &spba_clk);
+DEFINE_CLOCK(uart4_ipg_clk, 3, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG4_OFFSET,
+	NULL,  NULL, &ipg_clk, &spba_clk);
+DEFINE_CLOCK(uart5_ipg_clk, 4, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG6_OFFSET,
+	NULL,  NULL, &ipg_clk, &spba_clk);
 DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET,
 	NULL,  NULL, &uart_root_clk, &uart1_ipg_clk);
 DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET,
 	NULL,  NULL, &uart_root_clk, &uart2_ipg_clk);
 DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET,
 	NULL,  NULL, &uart_root_clk, &uart3_ipg_clk);
+DEFINE_CLOCK(uart4_clk, 3, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG5_OFFSET,
+	NULL,  NULL, &uart_root_clk, &uart4_ipg_clk);
+DEFINE_CLOCK(uart5_clk, 4, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG7_OFFSET,
+	NULL,  NULL, &uart_root_clk, &uart5_ipg_clk);
 
 /* GPT */
 DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
@@ -1279,6 +1287,8 @@ DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG10_OFFSET,
 	NULL, NULL, &ipg_perclk, NULL);
 DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
 	NULL, NULL, &ipg_clk, NULL);
+DEFINE_CLOCK(i2c3_mx53_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
+	NULL, NULL, &ipg_perclk, NULL);
 
 /* FEC */
 DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
@@ -1463,11 +1473,14 @@ static struct clk_lookup mx53_lookups[] = {
 	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
 	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
 	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+	_REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
+	_REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
 	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
 	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
 	_REGISTER_CLOCK(NULL, "iim_clk", iim_clk)
 	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
+	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_mx53_clk)
 	_REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
 	_REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_mx53_clk)
 	_REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_mx53_clk)
@@ -1479,6 +1492,11 @@ static struct clk_lookup mx53_lookups[] = {
 	_REGISTER_CLOCK("imx35-cspi.0", NULL, cspi_clk)
 	_REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk)
 	_REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk)
+	_REGISTER_CLOCK("imx-sdma", NULL, sdma_clk)
+	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
+	_REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
+	_REGISTER_CLOCK("imx-keypad", NULL, dummy_clk)
 };
 
 static void clk_tree_init(void)

arch/arm/mach-mx5/crm_regs.h

@@ -114,6 +114,8 @@
 #define MXC_CCM_CCGR4		(MX51_CCM_BASE + 0x78)
 #define MXC_CCM_CCGR5		(MX51_CCM_BASE + 0x7C)
 #define MXC_CCM_CCGR6		(MX51_CCM_BASE + 0x80)
+#define MXC_CCM_CCGR7		(MX51_CCM_BASE + 0x84)
+
 #define MXC_CCM_CMEOR		(MX51_CCM_BASE + 0x84)
 
 /* Define the bits in register CCR */

arch/arm/mach-mx5/devices-imx53.h

@@ -32,3 +32,11 @@ extern const struct imx_spi_imx_data imx53_ecspi_data[];
 extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[];
 #define imx53_add_imx2_wdt(id, pdata)	\
 	imx_add_imx2_wdt(&imx53_imx2_wdt_data[id])
+
+extern const struct imx_imx_ssi_data imx53_imx_ssi_data[];
+#define imx53_add_imx_ssi(id, pdata)	\
+	imx_add_imx_ssi(&imx53_imx_ssi_data[id], pdata)
+
+extern const struct imx_imx_keypad_data imx53_imx_keypad_data;
+#define imx53_add_imx_keypad(pdata)	\
+	imx_add_imx_keypad(&imx53_imx_keypad_data, pdata)

arch/arm/mach-mxs/Kconfig

@@ -41,6 +41,7 @@ config MACH_MX23EVK
 config MACH_MX28EVK
 	bool "Support MX28EVK Platform"
 	select SOC_IMX28
+	select LEDS_GPIO_REGISTER
 	select MXS_HAVE_AMBA_DUART
 	select MXS_HAVE_PLATFORM_AUART
 	select MXS_HAVE_PLATFORM_FEC
@@ -60,6 +61,7 @@ config MODULE_TX28
 	select MXS_HAVE_PLATFORM_AUART
 	select MXS_HAVE_PLATFORM_FEC
 	select MXS_HAVE_PLATFORM_MXS_I2C
+	select MXS_HAVE_PLATFORM_MXS_MMC
 	select MXS_HAVE_PLATFORM_MXS_PWM
 
 config MACH_TX28

arch/arm/mach-mxs/mach-tx28.c

@@ -139,6 +139,11 @@ static struct i2c_board_info tx28_stk5v3_i2c_boardinfo[] __initdata = {
 	},
 };
 
+static struct mxs_mmc_platform_data tx28_mmc0_pdata __initdata = {
+       .wp_gpio = -EINVAL,
+       .flags = SLOTF_4_BIT_CAPABLE,
+};
+
 static void __init tx28_stk5v3_init(void)
 {
 	mxs_iomux_setup_multiple_pads(tx28_stk5v3_pads,
@@ -155,6 +160,7 @@ static void __init tx28_stk5v3_init(void)
 	mx28_add_mxs_i2c(0);
 	i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo,
 			ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo));
+	mx28_add_mxs_mmc(0, &tx28_mmc0_pdata);
 }
 
 static void __init tx28_timer_init(void)

arch/arm/mach-pxa/balloon3.c

@@ -825,6 +825,7 @@ MACHINE_START(BALLOON3, "Balloon3")
 	.map_io		= balloon3_map_io,
 	.nr_irqs	= BALLOON3_NR_IRQS,
 	.init_irq	= balloon3_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= balloon3_init,
 	.boot_params	= PLAT_PHYS_OFFSET + 0x100,

arch/arm/mach-pxa/capc7117.c

@@ -151,6 +151,7 @@ MACHINE_START(CAPC7117,
 	.boot_params = 0xa0000100,
 	.map_io = pxa3xx_map_io,
 	.init_irq = pxa3xx_init_irq,
+	.handle_irq = pxa3xx_handle_irq,
 	.timer = &pxa_timer,
 	.init_machine = capc7117_init
 MACHINE_END

arch/arm/mach-pxa/clock.h

@@ -5,6 +5,7 @@ struct clkops {
 	void			(*enable)(struct clk *);
 	void			(*disable)(struct clk *);
 	unsigned long		(*getrate)(struct clk *);
+	int			(*setrate)(struct clk *, unsigned long);
 };
 
 struct clk {