x86_64: further cleanup of 32-bit compat syscall mechanisms

AMD only supports "syscall" from 32-bit compat usermode.
Intel and Centaur(?) only support "sysenter" from 32-bit compat usermode.

Set the X86 feature bits accordingly, and set up the vdso in
accordance with those bits.  On the offchance we run on in a 64-bit
environment which supports neither syscall nor sysenter from 32-bit
mode, then fall back to the int $0x80 vdso.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

arch/x86/kernel/cpu/amd_64.c

@@ -115,6 +115,8 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
 	/* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */
 	if (c->x86_power & (1<<8))
 		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+
+	set_cpu_cap(c, X86_FEATURE_SYSCALL32);
 }
 
 static void __cpuinit init_amd(struct cpuinfo_x86 *c)

arch/x86/kernel/cpu/common_64.c

@@ -317,9 +317,6 @@ static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
 		c->x86_phys_bits = eax & 0xff;
 	}
 
-	/* Assume all 64-bit CPUs support 32-bit syscall */
-	set_cpu_cap(c, X86_FEATURE_SYSCALL32);
-
 	if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
 	    cpu_devs[c->x86_vendor]->c_early_init)
 		cpu_devs[c->x86_vendor]->c_early_init(c);

arch/x86/vdso/Makefile

@@ -62,7 +62,7 @@ $(obj)/%-syms.lds: $(obj)/%.so.dbg FORCE
 # Build multiple 32-bit vDSO images to choose from at boot time.
 #
 obj-$(VDSO32-y)			+= vdso32-syms.lds
-vdso32.so-$(CONFIG_X86_32)	+= int80
+vdso32.so-$(VDSO32-y)		+= int80
 vdso32.so-$(CONFIG_COMPAT)	+= syscall
 vdso32.so-$(VDSO32-y)		+= sysenter
 

arch/x86/vdso/vdso32-setup.c

@@ -193,17 +193,12 @@ static __init void relocate_vdso(Elf32_Ehdr *ehdr)
 	}
 }
 
-/*
- * These symbols are defined by vdso32.S to mark the bounds
- * of the ELF DSO images included therein.
- */
-extern const char vdso32_default_start, vdso32_default_end;
-extern const char vdso32_sysenter_start, vdso32_sysenter_end;
 static struct page *vdso32_pages[1];
 
 #ifdef CONFIG_X86_64
 
 #define	vdso32_sysenter()	(boot_cpu_has(X86_FEATURE_SYSENTER32))
+#define	vdso32_syscall()	(boot_cpu_has(X86_FEATURE_SYSCALL32))
 
 /* May not be __init: called during resume */
 void syscall32_cpu_init(void)
@@ -226,6 +221,7 @@ static inline void map_compat_vdso(int map)
 #else  /* CONFIG_X86_32 */
 
 #define vdso32_sysenter()	(boot_cpu_has(X86_FEATURE_SEP))
+#define vdso32_syscall()	(0)
 
 void enable_sep_cpu(void)
 {
@@ -296,12 +292,15 @@ int __init sysenter_setup(void)
 	gate_vma_init();
 #endif
 
-	if (!vdso32_sysenter()) {
-		vsyscall = &vdso32_default_start;
-		vsyscall_len = &vdso32_default_end - &vdso32_default_start;
-	} else {
+	if (vdso32_syscall()) {
+		vsyscall = &vdso32_syscall_start;
+		vsyscall_len = &vdso32_syscall_end - &vdso32_syscall_start;
+	} else if (vdso32_sysenter()){
 		vsyscall = &vdso32_sysenter_start;
 		vsyscall_len = &vdso32_sysenter_end - &vdso32_sysenter_start;
+	} else {
+		vsyscall = &vdso32_int80_start;
+		vsyscall_len = &vdso32_int80_end - &vdso32_int80_start;
 	}
 
 	memcpy(syscall_page, vsyscall, vsyscall_len);

arch/x86/vdso/vdso32.S

@@ -2,14 +2,17 @@
 
 __INITDATA
 
-	.globl vdso32_default_start, vdso32_default_end
-vdso32_default_start:
-#ifdef CONFIG_X86_32
+	.globl vdso32_int80_start, vdso32_int80_end
+vdso32_int80_start:
 	.incbin "arch/x86/vdso/vdso32-int80.so"
-#else
+vdso32_int80_end:
+
+	.globl vdso32_syscall_start, vdso32_syscall_end
+vdso32_syscall_start:
+#ifdef CONFIG_COMPAT
 	.incbin "arch/x86/vdso/vdso32-syscall.so"
 #endif
-vdso32_default_end:
+vdso32_syscall_end:
 
 	.globl vdso32_sysenter_start, vdso32_sysenter_end
 vdso32_sysenter_start:

arch/x86/xen/setup.c

@@ -83,12 +83,16 @@ static void xen_idle(void)
 
 /*
  * Set the bit indicating "nosegneg" library variants should be used.
+ * We only need to bother in pure 32-bit mode; compat 32-bit processes
+ * can have un-truncated segments, so wrapping around is allowed.
  */
 static void __init fiddle_vdso(void)
 {
-#if defined(CONFIG_X86_32) || defined(CONFIG_IA32_EMULATION)
-	extern const char vdso32_default_start;
-	u32 *mask = VDSO32_SYMBOL(&vdso32_default_start, NOTE_MASK);
+#ifdef CONFIG_X86_32
+	u32 *mask;
+	mask = VDSO32_SYMBOL(&vdso32_int80_start, NOTE_MASK);
+	*mask |= 1 << VDSO_NOTE_NONEGSEG_BIT;
+	mask = VDSO32_SYMBOL(&vdso32_sysenter_start, NOTE_MASK);
 	*mask |= 1 << VDSO_NOTE_NONEGSEG_BIT;
 #endif
 }

include/asm-x86/vdso.h

@@ -36,4 +36,12 @@ extern const char VDSO32_PRELINK[];
 extern void __user __kernel_sigreturn;
 extern void __user __kernel_rt_sigreturn;
 
+/*
+ * These symbols are defined by vdso32.S to mark the bounds
+ * of the ELF DSO images included therein.
+ */
+extern const char vdso32_int80_start, vdso32_int80_end;
+extern const char vdso32_syscall_start, vdso32_syscall_end;
+extern const char vdso32_sysenter_start, vdso32_sysenter_end;
+
 #endif	/* asm-x86/vdso.h */