Skip to content

L
linux
Commit 6a7f6ec9 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu 

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (25 commits)
  m68knommu: fix broken setting of irq_chip and handler
  m68knommu: switch to using -mcpu= flags for ColdFire targets
  m68knommu: arch/m68knommu/Kconfig whitespace cleanup
  m68knommu: create optimal separate instruction and data cache for ColdFire
  m68knommu: support ColdFire caches that do copyback and write-through
  m68knommu: support version 2 ColdFire split cache
  m68knommu: make cache push code ColdFire generic
  m68knommu: clean up ColdFire cache control code
  m68knommu: move inclusion of ColdFire v4 cache registers
  m68knommu: merge bit definitions for version 3 ColdFire cache controller
  m68knommu: create bit definitions for the version 2 ColdFire cache controller
  m68knommu: remove empty __iounmap() it is no used
  m68knommu: remove kernel_map() code, it is not used
  m68knommu: remove do_page_fault(), it is not used
  m68knommu: use user stack pointer hardware on some ColdFire cores
  m68knommu: remove command line printing DEBUG
  m68knommu: remove fasthandler interrupt code
  m68knommu: move UART addressing to part specific includes
  m68knommu: fix clock rate value reported for ColdFire 54xx parts
  m68knommu: move ColdFire CPU names into their headers
  ...
parents c6fa63c6 4c65595e
Hide whitespace changes
Inline Side-by-side
Showing with 727 additions and 623 deletions
arch/m68k/include/asm/cacheflush_no.h
View file @ 6a7f6ec9
...@@ -2,21 +2,22 @@ ...@@ -2,21 +2,22 @@
#define _M68KNOMMU_CACHEFLUSH_H #define _M68KNOMMU_CACHEFLUSH_H
/* /*
* (C) Copyright 2000-2004, Greg Ungerer <gerg@snapgear.com> * (C) Copyright 2000-2010, Greg Ungerer <gerg@snapgear.com>
*/ */
#include <linux/mm.h> #include <linux/mm.h>
#include <asm/mcfsim.h>
#define flush_cache_all() __flush_cache_all() #define flush_cache_all() __flush_cache_all()
#define flush_cache_mm(mm) do { } while (0) #define flush_cache_mm(mm) do { } while (0)
#define flush_cache_dup_mm(mm) do { } while (0) #define flush_cache_dup_mm(mm) do { } while (0)
#define flush_cache_range(vma, start, end) __flush_cache_all() #define flush_cache_range(vma, start, end) do { } while (0)
#define flush_cache_page(vma, vmaddr) do { } while (0) #define flush_cache_page(vma, vmaddr) do { } while (0)
#define flush_dcache_range(start,len) __flush_cache_all() #define flush_dcache_range(start, len) __flush_dcache_all()
#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0 #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
#define flush_dcache_page(page) do { } while (0) #define flush_dcache_page(page) do { } while (0)
#define flush_dcache_mmap_lock(mapping) do { } while (0) #define flush_dcache_mmap_lock(mapping) do { } while (0)
#define flush_dcache_mmap_unlock(mapping) do { } while (0) #define flush_dcache_mmap_unlock(mapping) do { } while (0)
#define flush_icache_range(start,len) __flush_cache_all() #define flush_icache_range(start, len) __flush_icache_all()
#define flush_icache_page(vma,pg) do { } while (0) #define flush_icache_page(vma,pg) do { } while (0)
#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) #define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
#define flush_cache_vmap(start, end) do { } while (0) #define flush_cache_vmap(start, end) do { } while (0)
...@@ -27,66 +28,52 @@ ...@@ -27,66 +28,52 @@
#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ #define copy_from_user_page(vma, page, vaddr, dst, src, len) \
memcpy(dst, src, len) memcpy(dst, src, len)
void mcf_cache_push(void);
static inline void __flush_cache_all(void) static inline void __flush_cache_all(void)
{ {
#if defined(CONFIG_M5407) || defined(CONFIG_M548x) #ifdef CACHE_PUSH
/* mcf_cache_push();
* Use cpushl to push and invalidate all cache lines. #endif
* Gas doesn't seem to know how to generate the ColdFire #ifdef CACHE_INVALIDATE
* cpushl instruction... Oh well, bit stuff it for now.
*/
__asm__ __volatile__ (
"nop\n\t"
"clrl %%d0\n\t"
"1:\n\t"
"movel %%d0,%%a0\n\t"
"2:\n\t"
".word 0xf468\n\t"
"addl #0x10,%%a0\n\t"
"cmpl #0x00000800,%%a0\n\t"
"blt 2b\n\t"
"addql #1,%%d0\n\t"
"cmpil #4,%%d0\n\t"
"bne 1b\n\t"
"movel #0xb6088500,%%d0\n\t"
"movec %%d0,%%CACR\n\t"
: : : "d0", "a0" );
#endif /* CONFIG_M5407 */
#if defined(CONFIG_M523x) || defined(CONFIG_M527x)
__asm__ __volatile__ (
"movel #0x81400100, %%d0\n\t"
"movec %%d0, %%CACR\n\t"
"nop\n\t"
: : : "d0" );
#endif /* CONFIG_M523x || CONFIG_M527x */
#if defined(CONFIG_M528x)
__asm__ __volatile__ (
"movel #0x81000200, %%d0\n\t"
"movec %%d0, %%CACR\n\t"
"nop\n\t"
: : : "d0" );
#endif /* CONFIG_M528x */
#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
__asm__ __volatile__ ( __asm__ __volatile__ (
"movel #0x81000100, %%d0\n\t" "movel %0, %%d0\n\t"
"movec %%d0, %%CACR\n\t" "movec %%d0, %%CACR\n\t"
"nop\n\t" "nop\n\t"
: : : "d0" ); : : "i" (CACHE_INVALIDATE) : "d0" );
#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */ #endif
#ifdef CONFIG_M5249 }
/*
* Some ColdFire parts implement separate instruction and data caches,
* on those we should just flush the appropriate cache. If we don't need
* to do any specific flushing then this will be optimized away.
*/
static inline void __flush_icache_all(void)
{
#ifdef CACHE_INVALIDATEI
__asm__ __volatile__ ( __asm__ __volatile__ (
"movel #0xa1000200, %%d0\n\t" "movel %0, %%d0\n\t"
"movec %%d0, %%CACR\n\t" "movec %%d0, %%CACR\n\t"
"nop\n\t" "nop\n\t"
: : : "d0" ); : : "i" (CACHE_INVALIDATEI) : "d0" );
#endif /* CONFIG_M5249 */ #endif
#ifdef CONFIG_M532x }
static inline void __flush_dcache_all(void)
{
#ifdef CACHE_PUSH
mcf_cache_push();
#endif
#ifdef CACHE_INVALIDATED
__asm__ __volatile__ ( __asm__ __volatile__ (
"movel #0x81000200, %%d0\n\t" "movel %0, %%d0\n\t"
"movec %%d0, %%CACR\n\t" "movec %%d0, %%CACR\n\t"
"nop\n\t" "nop\n\t"
: : : "d0" ); : : "i" (CACHE_INVALIDATED) : "d0" );
#endif /* CONFIG_M532x */ #else
/* Flush the wrtite buffer */
__asm__ __volatile__ ( "nop" );
#endif
} }
#endif /* _M68KNOMMU_CACHEFLUSH_H */ #endif /* _M68KNOMMU_CACHEFLUSH_H */
arch/m68k/include/asm/coldfire.h
View file @ 6a7f6ec9
...@@ -32,7 +32,7 @@ ...@@ -32,7 +32,7 @@
*/ */
#define MCF_MBAR 0x10000000 #define MCF_MBAR 0x10000000
#define MCF_MBAR2 0x80000000 #define MCF_MBAR2 0x80000000
#if defined(CONFIG_M548x) #if defined(CONFIG_M54xx)
#define MCF_IPSBAR MCF_MBAR #define MCF_IPSBAR MCF_MBAR
#elif defined(CONFIG_M520x) #elif defined(CONFIG_M520x)
#define MCF_IPSBAR 0xFC000000 #define MCF_IPSBAR 0xFC000000
......
arch/m68k/include/asm/entry_no.h
View file @ 6a7f6ec9
...@@ -42,12 +42,16 @@ ...@@ -42,12 +42,16 @@
*/ */
#ifdef CONFIG_COLDFIRE #ifdef CONFIG_COLDFIRE
#ifdef CONFIG_COLDFIRE_SW_A7
/* /*
* This is made a little more tricky on the ColdFire. There is no * This is made a little more tricky on older ColdFires. There is no
* separate kernel and user stack pointers. Need to artificially * separate supervisor and user stack pointers. Need to artificially
* construct a usp in software... When doing this we need to disable * construct a usp in software... When doing this we need to disable
* interrupts, otherwise bad things could happen. * interrupts, otherwise bad things will happen.
*/ */
.globl sw_usp
.globl sw_ksp
.macro SAVE_ALL .macro SAVE_ALL
move #0x2700,%sr /* disable intrs */ move #0x2700,%sr /* disable intrs */
btst #5,%sp@(2) /* from user? */ btst #5,%sp@(2) /* from user? */
...@@ -74,9 +78,7 @@ ...@@ -74,9 +78,7 @@
7: 7:
.endm .endm
.macro RESTORE_ALL .macro RESTORE_USER
btst #5,%sp@(PT_SR) /* going user? */
bnes 8f /* no, skip */
move #0x2700,%sr /* disable intrs */ move #0x2700,%sr /* disable intrs */
movel sw_usp,%a0 /* get usp */ movel sw_usp,%a0 /* get usp */
movel %sp@(PT_OFF_PC),%a0@- /* copy exception program counter */ movel %sp@(PT_OFF_PC),%a0@- /* copy exception program counter */
...@@ -91,19 +93,22 @@ ...@@ -91,19 +93,22 @@
subql #8,sw_usp /* set exception */ subql #8,sw_usp /* set exception */
movel sw_usp,%sp /* restore usp */ movel sw_usp,%sp /* restore usp */
rte rte
8:
moveml %sp@,%d1-%d5/%a0-%a2
lea %sp@(32),%sp /* space for 8 regs */
movel %sp@+,%d0
addql #4,%sp /* orig d0 */
addl %sp@+,%sp /* stkadj */
rte
.endm .endm
.macro RDUSP
movel sw_usp,%a2
.endm
.macro WRUSP
movel %a0,sw_usp
.endm
#else /* !CONFIG_COLDFIRE_SW_A7 */
/* /*
* Quick exception save, use current stack only. * Modern ColdFire parts have separate supervisor and user stack
* pointers. Simple load and restore macros for this case.
*/ */
.macro SAVE_LOCAL .macro SAVE_ALL
move #0x2700,%sr /* disable intrs */ move #0x2700,%sr /* disable intrs */
clrl %sp@- /* stkadj */ clrl %sp@- /* stkadj */
movel %d0,%sp@- /* orig d0 */ movel %d0,%sp@- /* orig d0 */
...@@ -112,7 +117,7 @@ ...@@ -112,7 +117,7 @@
moveml %d1-%d5/%a0-%a2,%sp@ moveml %d1-%d5/%a0-%a2,%sp@
.endm .endm
.macro RESTORE_LOCAL .macro RESTORE_USER
moveml %sp@,%d1-%d5/%a0-%a2 moveml %sp@,%d1-%d5/%a0-%a2
lea %sp@(32),%sp /* space for 8 regs */ lea %sp@(32),%sp /* space for 8 regs */
movel %sp@+,%d0 movel %sp@+,%d0
...@@ -121,6 +126,18 @@ ...@@ -121,6 +126,18 @@
rte rte
.endm .endm
.macro RDUSP
/*move %usp,%a2*/
.word 0x4e6a
.endm
.macro WRUSP
/*move %a0,%usp*/
.word 0x4e60
.endm
#endif /* !CONFIG_COLDFIRE_SW_A7 */
.macro SAVE_SWITCH_STACK .macro SAVE_SWITCH_STACK
lea %sp@(-24),%sp /* 6 regs */ lea %sp@(-24),%sp /* 6 regs */
moveml %a3-%a6/%d6-%d7,%sp@ moveml %a3-%a6/%d6-%d7,%sp@
...@@ -131,14 +148,6 @@ ...@@ -131,14 +148,6 @@
lea %sp@(24),%sp /* 6 regs */ lea %sp@(24),%sp /* 6 regs */
.endm .endm
/*
* Software copy of the user and kernel stack pointers... Ugh...
* Need these to get around ColdFire not having separate kernel
* and user stack pointers.
*/
.globl sw_usp
.globl sw_ksp
#else /* !CONFIG_COLDFIRE */ #else /* !CONFIG_COLDFIRE */
/* /*
...@@ -167,6 +176,6 @@ ...@@ -167,6 +176,6 @@
moveml %sp@+,%a3-%a6/%d6-%d7 moveml %sp@+,%a3-%a6/%d6-%d7
.endm .endm
#endif /* !CONFIG_COLDFIRE */ #endif /* !COLDFIRE_SW_A7 */
#endif /* __ASSEMBLY__ */ #endif /* __ASSEMBLY__ */
#endif /* __M68KNOMMU_ENTRY_H */ #endif /* __M68KNOMMU_ENTRY_H */
arch/m68k/include/asm/gpio.h
View file @ 6a7f6ec9
...@@ -37,7 +37,7 @@ ...@@ -37,7 +37,7 @@
#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ #if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
defined(CONFIG_M532x) || defined(CONFIG_M548x) defined(CONFIG_M532x) || defined(CONFIG_M54xx)
/* These parts have GPIO organized by 8 bit ports */ /* These parts have GPIO organized by 8 bit ports */
......
arch/m68k/include/asm/io_no.h
View file @ 6a7f6ec9
...@@ -145,7 +145,6 @@ static inline void io_insl(unsigned int addr, void *buf, int len) ...@@ -145,7 +145,6 @@ static inline void io_insl(unsigned int addr, void *buf, int len)
#define IOMAP_WRITETHROUGH 3 #define IOMAP_WRITETHROUGH 3
extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag); extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
extern void __iounmap(void *addr, unsigned long size);
static inline void *ioremap(unsigned long physaddr, unsigned long size) static inline void *ioremap(unsigned long physaddr, unsigned long size)
{ {
......
arch/m68k/include/asm/m5206sim.h
View file @ 6a7f6ec9
...@@ -12,6 +12,10 @@ ...@@ -12,6 +12,10 @@
#define m5206sim_h #define m5206sim_h
/****************************************************************************/ /****************************************************************************/
#define CPU_NAME "COLDFIRE(m5206)"
#define CPU_INSTR_PER_JIFFY 3
#include <asm/m52xxacr.h>
/* /*
* Define the 5206 SIM register set addresses. * Define the 5206 SIM register set addresses.
...@@ -88,6 +92,14 @@ ...@@ -88,6 +92,14 @@
#define MCFSIM_PADDR (MCF_MBAR + 0x1c5) /* Parallel Direction (r/w) */ #define MCFSIM_PADDR (MCF_MBAR + 0x1c5) /* Parallel Direction (r/w) */
#define MCFSIM_PADAT (MCF_MBAR + 0x1c9) /* Parallel Port Value (r/w) */ #define MCFSIM_PADAT (MCF_MBAR + 0x1c9) /* Parallel Port Value (r/w) */
#if defined(CONFIG_NETtel)
#define MCFUART_BASE1 0x180 /* Base address of UART1 */
#define MCFUART_BASE2 0x140 /* Base address of UART2 */
#else
#define MCFUART_BASE1 0x140 /* Base address of UART1 */
#define MCFUART_BASE2 0x180 /* Base address of UART2 */
#endif
/* /*
* Define system peripheral IRQ usage. * Define system peripheral IRQ usage.
*/ */
...@@ -95,7 +107,7 @@ ...@@ -95,7 +107,7 @@
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ #define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
/* /*
* Generic GPIO * Generic GPIO
*/ */
#define MCFGPIO_PIN_MAX 8 #define MCFGPIO_PIN_MAX 8
#define MCFGPIO_IRQ_VECBASE -1 #define MCFGPIO_IRQ_VECBASE -1
......
arch/m68k/include/asm/m520xsim.h
View file @ 6a7f6ec9
...@@ -11,6 +11,11 @@ ...@@ -11,6 +11,11 @@
#define m520xsim_h #define m520xsim_h
/****************************************************************************/ /****************************************************************************/
#define CPU_NAME "COLDFIRE(m520x)"
#define CPU_INSTR_PER_JIFFY 3
#include <asm/m52xxacr.h>
/* /*
* Define the 520x SIM register set addresses. * Define the 520x SIM register set addresses.
*/ */
...@@ -54,6 +59,9 @@ ...@@ -54,6 +59,9 @@
#define MCFSIM_SDCS0 0x000a8110 /* SDRAM Chip Select 0 Configuration */ #define MCFSIM_SDCS0 0x000a8110 /* SDRAM Chip Select 0 Configuration */
#define MCFSIM_SDCS1 0x000a8114 /* SDRAM Chip Select 1 Configuration */ #define MCFSIM_SDCS1 0x000a8114 /* SDRAM Chip Select 1 Configuration */
/*
* EPORT and GPIO registers.
*/
#define MCFEPORT_EPDDR 0xFC088002 #define MCFEPORT_EPDDR 0xFC088002
#define MCFEPORT_EPDR 0xFC088004 #define MCFEPORT_EPDR 0xFC088004
#define MCFEPORT_EPPDR 0xFC088005 #define MCFEPORT_EPPDR 0xFC088005
...@@ -97,6 +105,7 @@ ...@@ -97,6 +105,7 @@
#define MCFGPIO_PCLRR_UART 0xFC0A402A #define MCFGPIO_PCLRR_UART 0xFC0A402A
#define MCFGPIO_PCLRR_FECH 0xFC0A402B #define MCFGPIO_PCLRR_FECH 0xFC0A402B
#define MCFGPIO_PCLRR_FECL 0xFC0A402C #define MCFGPIO_PCLRR_FECL 0xFC0A402C
/* /*
* Generic GPIO support * Generic GPIO support
*/ */
...@@ -109,7 +118,6 @@ ...@@ -109,7 +118,6 @@
#define MCFGPIO_PIN_MAX 80 #define MCFGPIO_PIN_MAX 80
#define MCFGPIO_IRQ_MAX 8 #define MCFGPIO_IRQ_MAX 8
#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE #define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE
/****************************************************************************/
#define MCF_GPIO_PAR_UART (0xA4036) #define MCF_GPIO_PAR_UART (0xA4036)
#define MCF_GPIO_PAR_FECI2C (0xA4033) #define MCF_GPIO_PAR_FECI2C (0xA4033)
...@@ -125,6 +133,13 @@ ...@@ -125,6 +133,13 @@
#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02) #define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02)
#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04) #define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04)
/*
* UART module.
*/
#define MCFUART_BASE1 0x60000 /* Base address of UART1 */
#define MCFUART_BASE2 0x64000 /* Base address of UART2 */
#define MCFUART_BASE3 0x68000 /* Base address of UART2 */
/* /*
* Reset Controll Unit. * Reset Controll Unit.
*/ */
......
arch/m68k/include/asm/m523xsim.h
View file @ 6a7f6ec9
...@@ -11,6 +11,10 @@ ...@@ -11,6 +11,10 @@
#define m523xsim_h #define m523xsim_h
/****************************************************************************/ /****************************************************************************/
#define CPU_NAME "COLDFIRE(m523x)"
#define CPU_INSTR_PER_JIFFY 3
#include <asm/m52xxacr.h>
/* /*
* Define the 523x SIM register set addresses. * Define the 523x SIM register set addresses.
...@@ -50,6 +54,13 @@ ...@@ -50,6 +54,13 @@
#define MCF_RCR_SWRESET 0x80 /* Software reset bit */ #define MCF_RCR_SWRESET 0x80 /* Software reset bit */
#define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */ #define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */
/*
* UART module.
*/
#define MCFUART_BASE1 0x200 /* Base address of UART1 */
#define MCFUART_BASE2 0x240 /* Base address of UART2 */
#define MCFUART_BASE3 0x280 /* Base address of UART3 */
#define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000) #define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000)
#define MCFGPIO_PODR_DATAH (MCF_IPSBAR + 0x100001) #define MCFGPIO_PODR_DATAH (MCF_IPSBAR + 0x100001)
#define MCFGPIO_PODR_DATAL (MCF_IPSBAR + 0x100002) #define MCFGPIO_PODR_DATAL (MCF_IPSBAR + 0x100002)
......
arch/m68k/include/asm/m5249sim.h
View file @ 6a7f6ec9
...@@ -11,6 +11,11 @@ ...@@ -11,6 +11,11 @@
#define m5249sim_h #define m5249sim_h
/****************************************************************************/ /****************************************************************************/
#define CPU_NAME "COLDFIRE(m5249)"
#define CPU_INSTR_PER_JIFFY 3
#include <asm/m52xxacr.h>
/* /*
* Define the 5249 SIM register set addresses. * Define the 5249 SIM register set addresses.
*/ */
...@@ -56,6 +61,11 @@ ...@@ -56,6 +61,11 @@
#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ #define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */
#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ #define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */
/*
* UART module.
*/
#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */
#define MCFUART_BASE2 0x200 /* Base address of UART2 */
/* /*
* Some symbol defines for the above... * Some symbol defines for the above...
......
arch/m68k/include/asm/m5272sim.h
View file @ 6a7f6ec9
...@@ -12,6 +12,11 @@ ...@@ -12,6 +12,11 @@
#define m5272sim_h #define m5272sim_h
/****************************************************************************/ /****************************************************************************/
#define CPU_NAME "COLDFIRE(m5272)"
#define CPU_INSTR_PER_JIFFY 3
#include <asm/m52xxacr.h>
/* /*
* Define the 5272 SIM register set addresses. * Define the 5272 SIM register set addresses.
*/ */
...@@ -62,6 +67,9 @@ ...@@ -62,6 +67,9 @@
#define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */ #define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */
#define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */ #define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */
#define MCFUART_BASE1 0x100 /* Base address of UART1 */
#define MCFUART_BASE2 0x140 /* Base address of UART2 */
#define MCFSIM_PACNT (MCF_MBAR + 0x80) /* Port A Control (r/w) */ #define MCFSIM_PACNT (MCF_MBAR + 0x80) /* Port A Control (r/w) */
#define MCFSIM_PADDR (MCF_MBAR + 0x84) /* Port A Direction (r/w) */ #define MCFSIM_PADDR (MCF_MBAR + 0x84) /* Port A Direction (r/w) */
#define MCFSIM_PADAT (MCF_MBAR + 0x86) /* Port A Data (r/w) */ #define MCFSIM_PADAT (MCF_MBAR + 0x86) /* Port A Data (r/w) */
......
arch/m68k/include/asm/m527xsim.h
View file @ 6a7f6ec9
...@@ -11,6 +11,10 @@ ...@@ -11,6 +11,10 @@
#define m527xsim_h #define m527xsim_h
/****************************************************************************/ /****************************************************************************/
#define CPU_NAME "COLDFIRE(m527x)"
#define CPU_INSTR_PER_JIFFY 3
#include <asm/m52xxacr.h>
/* /*
* Define the 5270/5271 SIM register set addresses. * Define the 5270/5271 SIM register set addresses.
...@@ -55,6 +59,12 @@ ...@@ -55,6 +59,12 @@
#define MCFSIM_DMR1 0x5c /* SDRAM address mask 1 */ #define MCFSIM_DMR1 0x5c /* SDRAM address mask 1 */
#endif #endif
/*
* UART module.
*/
#define MCFUART_BASE1 0x200 /* Base address of UART1 */
#define MCFUART_BASE2 0x240 /* Base address of UART2 */
#define MCFUART_BASE3 0x280 /* Base address of UART3 */
#ifdef CONFIG_M5271 #ifdef CONFIG_M5271
#define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000) #define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000)
......
arch/m68k/include/asm/m528xsim.h
View file @ 6a7f6ec9
...@@ -11,6 +11,10 @@ ...@@ -11,6 +11,10 @@
#define m528xsim_h #define m528xsim_h
/****************************************************************************/ /****************************************************************************/
#define CPU_NAME "COLDFIRE(m528x)"
#define CPU_INSTR_PER_JIFFY 3
#include <asm/m52xxacr.h>
/* /*
* Define the 5280/5282 SIM register set addresses. * Define the 5280/5282 SIM register set addresses.
...@@ -41,6 +45,13 @@ ...@@ -41,6 +45,13 @@
#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */ #define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */
#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ #define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */
/*
* UART module.
*/
#define MCFUART_BASE1 0x200 /* Base address of UART1 */
#define MCFUART_BASE2 0x240 /* Base address of UART2 */
#define MCFUART_BASE3 0x280 /* Base address of UART3 */
/* /*
* GPIO registers * GPIO registers
*/ */
......
arch/m68k/include/asm/m52xxacr.h 0 → 100644
View file @ 6a7f6ec9
/****************************************************************************/
/*
* m52xxacr.h -- ColdFire version 2 core cache support
*
* (C) Copyright 2010, Greg Ungerer <gerg@snapgear.com>
*/
/****************************************************************************/
#ifndef m52xxacr_h
#define m52xxacr_h
/****************************************************************************/
/*
* All varients of the ColdFire using version 2 cores have a similar
* cache setup. Although not absolutely identical the cache register
* definitions are compatible for all of them. Mostly they support a
* configurable cache memory that can be instruction only, data only,
* or split instruction and data. The exception is the very old version 2
* core based parts, like the 5206(e), 5249 and 5272, which are instruction
* cache only. Cache size varies from 2k up to 16k.
*/
/*
* Define the Cache Control register flags.
*/
#define CACR_CENB 0x80000000 /* Enable cache */
#define CACR_CDPI 0x10000000 /* Disable invalidation by CPUSHL */
#define CACR_CFRZ 0x08000000 /* Cache freeze mode */
#define CACR_CINV 0x01000000 /* Invalidate cache */
#define CACR_DISI 0x00800000 /* Disable instruction cache */
#define CACR_DISD 0x00400000 /* Disable data cache */
#define CACR_INVI 0x00200000 /* Invalidate instruction cache */
#define CACR_INVD 0x00100000 /* Invalidate data cache */
#define CACR_CEIB 0x00000400 /* Non-cachable instruction burst */
#define CACR_DCM 0x00000200 /* Default cache mode */
#define CACR_DBWE 0x00000100 /* Buffered write enable */
#define CACR_DWP 0x00000020 /* Write protection */
#define CACR_EUSP 0x00000010 /* Enable separate user a7 */
/*
* Define the Access Control register flags.
*/
#define ACR_BASE_POS 24 /* Address Base (upper 8 bits) */
#define ACR_MASK_POS 16 /* Address Mask (next 8 bits) */
#define ACR_ENABLE 0x00008000 /* Enable this ACR */
#define ACR_USER 0x00000000 /* Allow only user accesses */
#define ACR_SUPER 0x00002000 /* Allow supervisor access only */
#define ACR_ANY 0x00004000 /* Allow any access type */
#define ACR_CENB 0x00000000 /* Caching of region enabled */
#define ACR_CDIS 0x00000040 /* Caching of region disabled */
#define ACR_BWE 0x00000020 /* Write buffer enabled */
#define ACR_WPROTECT 0x00000004 /* Write protect region */
/*
* Set the cache controller settings we will use. On the cores that support
* a split cache configuration we allow all the combinations at Kconfig
* time. For those cores that only have an instruction cache we just set
* that as on.
*/
#if defined(CONFIG_CACHE_I)
#define CACHE_TYPE (CACR_DISD + CACR_EUSP)
#define CACHE_INVTYPEI 0
#elif defined(CONFIG_CACHE_D)
#define CACHE_TYPE (CACR_DISI + CACR_EUSP)
#define CACHE_INVTYPED 0
#elif defined(CONFIG_CACHE_BOTH)
#define CACHE_TYPE CACR_EUSP
#define CACHE_INVTYPEI CACR_INVI
#define CACHE_INVTYPED CACR_INVD
#else
/* This is the instruction cache only devices (no split cache, no eusp) */
#define CACHE_TYPE 0
#define CACHE_INVTYPEI 0
#endif
#define CACHE_INIT (CACR_CINV + CACHE_TYPE)
#define CACHE_MODE (CACR_CENB + CACHE_TYPE + CACR_DCM)
#define CACHE_INVALIDATE (CACHE_MODE + CACR_CINV)
#if defined(CACHE_INVTYPEI)
#define CACHE_INVALIDATEI (CACHE_MODE + CACR_CINV + CACHE_INVTYPEI)
#endif
#if defined(CACHE_INVTYPED)
#define CACHE_INVALIDATED (CACHE_MODE + CACR_CINV + CACHE_INVTYPED)
#endif
#define ACR0_MODE ((CONFIG_RAMBASE & 0xff000000) + \
(0x000f0000) + \
(ACR_ENABLE + ACR_ANY + ACR_CENB + ACR_BWE))
#define ACR1_MODE 0
/****************************************************************************/
#endif /* m52xxsim_h */
arch/m68k/include/asm/m5307sim.h
View file @ 6a7f6ec9
...@@ -14,6 +14,11 @@ ...@@ -14,6 +14,11 @@
#define m5307sim_h #define m5307sim_h
/****************************************************************************/ /****************************************************************************/
#define CPU_NAME "COLDFIRE(m5307)"
#define CPU_INSTR_PER_JIFFY 3
#include <asm/m53xxacr.h>
/* /*
* Define the 5307 SIM register set addresses. * Define the 5307 SIM register set addresses.
*/ */
...@@ -93,6 +98,17 @@ ...@@ -93,6 +98,17 @@
#define MCFSIM_PADDR (MCF_MBAR + 0x244) #define MCFSIM_PADDR (MCF_MBAR + 0x244)
#define MCFSIM_PADAT (MCF_MBAR + 0x248) #define MCFSIM_PADAT (MCF_MBAR + 0x248)
/*
* UART module.
*/
#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
#define MCFUART_BASE1 0x200 /* Base address of UART1 */
#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */
#else
#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */
#define MCFUART_BASE2 0x200 /* Base address of UART2 */
#endif
/* /*
* Generic GPIO support * Generic GPIO support
*/ */
...@@ -146,32 +162,5 @@ ...@@ -146,32 +162,5 @@
#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ #define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ #define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
/*
* Define the Cache register flags.
*/
#define CACR_EC (1<<31)
#define CACR_ESB (1<<29)
#define CACR_DPI (1<<28)
#define CACR_HLCK (1<<27)
#define CACR_CINVA (1<<24)
#define CACR_DNFB (1<<10)
#define CACR_DCM_WTHRU (0<<8)
#define CACR_DCM_WBACK (1<<8)
#define CACR_DCM_OFF_PRE (2<<8)
#define CACR_DCM_OFF_IMP (3<<8)
#define CACR_DW (1<<5)
#define ACR_BASE_POS 24
#define ACR_MASK_POS 16
#define ACR_ENABLE (1<<15)
#define ACR_USER (0<<13)
#define ACR_SUPER (1<<13)
#define ACR_ANY (2<<13)
#define ACR_CM_WTHRU (0<<5)
#define ACR_CM_WBACK (1<<5)
#define ACR_CM_OFF_PRE (2<<5)
#define ACR_CM_OFF_IMP (3<<5)
#define ACR_WPROTECT (1<<2)
/****************************************************************************/ /****************************************************************************/
#endif /* m5307sim_h */ #endif /* m5307sim_h */
arch/m68k/include/asm/m532xsim.h
View file @ 6a7f6ec9
...@@ -9,6 +9,11 @@ ...@@ -9,6 +9,11 @@
#define m532xsim_h #define m532xsim_h
/****************************************************************************/ /****************************************************************************/
#define CPU_NAME "COLDFIRE(m532x)"
#define CPU_INSTR_PER_JIFFY 3
#include <asm/m53xxacr.h>
#define MCF_REG32(x) (*(volatile unsigned long *)(x)) #define MCF_REG32(x) (*(volatile unsigned long *)(x))
#define MCF_REG16(x) (*(volatile unsigned short *)(x)) #define MCF_REG16(x) (*(volatile unsigned short *)(x))
#define MCF_REG08(x) (*(volatile unsigned char *)(x)) #define MCF_REG08(x) (*(volatile unsigned char *)(x))
...@@ -74,31 +79,11 @@ ...@@ -74,31 +79,11 @@
#define MCF_IRQ_PROFILER (64 + 33) /* Timer1 */ #define MCF_IRQ_PROFILER (64 + 33) /* Timer1 */
/* /*
* Define the Cache register flags. * UART module.
*/ */
#define CACR_EC (1<<31) #define MCFUART_BASE1 0xFC060000 /* Base address of UART1 */
#define CACR_ESB (1<<29) #define MCFUART_BASE2 0xFC064000 /* Base address of UART2 */
#define CACR_DPI (1<<28) #define MCFUART_BASE3 0xFC068000 /* Base address of UART3 */
#define CACR_HLCK (1<<27)
#define CACR_CINVA (1<<24)
#define CACR_DNFB (1<<10)
#define CACR_DCM_WTHRU (0<<8)
#define CACR_DCM_WBACK (1<<8)
#define CACR_DCM_OFF_PRE (2<<8)
#define CACR_DCM_OFF_IMP (3<<8)
#define CACR_DW (1<<5)
#define ACR_BASE_POS 24
#define ACR_MASK_POS 16
#define ACR_ENABLE (1<<15)
#define ACR_USER (0<<13)
#define ACR_SUPER (1<<13)
#define ACR_ANY (2<<13)
#define ACR_CM_WTHRU (0<<5)
#define ACR_CM_WBACK (1<<5)
#define ACR_CM_OFF_PRE (2<<5)
#define ACR_CM_OFF_IMP (3<<5)
#define ACR_WPROTECT (1<<2)
/********************************************************************* /*********************************************************************
* *
......
arch/m68k/include/asm/m53xxacr.h 0 → 100644
View file @ 6a7f6ec9
/****************************************************************************/
/*
* m53xxacr.h -- ColdFire version 3 core cache support
*
* (C) Copyright 2010, Greg Ungerer <gerg@snapgear.com>
*/
/****************************************************************************/
#ifndef m53xxacr_h
#define m53xxacr_h
/****************************************************************************/
/*
* All varients of the ColdFire using version 3 cores have a similar
* cache setup. They have a unified instruction and data cache, with
* configurable write-through or copy-back operation.
*/
/*
* Define the Cache Control register flags.
*/
#define CACR_EC 0x80000000 /* Enable cache */
#define CACR_ESB 0x20000000 /* Enable store buffer */
#define CACR_DPI 0x10000000 /* Disable invalidation by CPUSHL */
#define CACR_HLCK 0x08000000 /* Half cache lock mode */
#define CACR_CINVA 0x01000000 /* Invalidate cache */
#define CACR_DNFB 0x00000400 /* Inhibited fill buffer */
#define CACR_DCM_WT 0x00000000 /* Cacheable write-through */
#define CACR_DCM_CB 0x00000100 /* Cacheable copy-back */
#define CACR_DCM_PRE 0x00000200 /* Cache inhibited, precise */
#define CACR_DCM_IMPRE 0x00000300 /* Cache inhibited, imprecise */
#define CACR_WPROTECT 0x00000020 /* Write protect*/
#define CACR_EUSP 0x00000010 /* Eanble separate user a7 */
/*
* Define the Access Control register flags.
*/
#define ACR_BASE_POS 24 /* Address Base (upper 8 bits) */
#define ACR_MASK_POS 16 /* Address Mask (next 8 bits) */
#define ACR_ENABLE 0x00008000 /* Enable this ACR */
#define ACR_USER 0x00000000 /* Allow only user accesses */
#define ACR_SUPER 0x00002000 /* Allow supervisor access only */
#define ACR_ANY 0x00004000 /* Allow any access type */
#define ACR_CM_WT 0x00000000 /* Cacheable, write-through */
#define ACR_CM_CB 0x00000020 /* Cacheable, copy-back */
#define ACR_CM_PRE 0x00000040 /* Cache inhibited, precise */
#define ACR_CM_IMPRE 0x00000060 /* Cache inhibited, imprecise */
#define ACR_WPROTECT 0x00000004 /* Write protect region */
/*
* Define the cache type and arrangement (needed for pushes).
*/
#if defined(CONFIG_M5307)
#define CACHE_SIZE 0x2000 /* 8k of unified cache */
#define ICACHE_SIZE CACHE_SIZE
#define DCACHE_SIZE CACHE_SIZE
#elif defined(CONFIG_M532x)
#define CACHE_SIZE 0x4000 /* 32k of unified cache */
#define ICACHE_SIZE CACHE_SIZE
#define DCACHE_SIZE CACHE_SIZE
#endif
#define CACHE_LINE_SIZE 16 /* 16 byte line size */
#define CACHE_WAYS 4 /* 4 ways - set associative */
/*
* Set the cache controller settings we will use. This default in the
* CACR is cache inhibited, we use the ACR register to set cacheing
* enabled on the regions we want (eg RAM).
*/
#if defined(CONFIG_CACHE_COPYBACK)
#define CACHE_TYPE ACR_CM_CB
#define CACHE_PUSH
#else
#define CACHE_TYPE ACR_CM_WT
#endif
#ifdef CONFIG_COLDFIRE_SW_A7
#define CACHE_MODE (CACR_EC + CACR_ESB + CACR_DCM_PRE)
#else
#define CACHE_MODE (CACR_EC + CACR_ESB + CACR_DCM_PRE + CACR_EUSP)
#endif
/*
* Unified cache means we will never need to flush for coherency of
* instruction fetch. We will need to flush to maintain memory/DMA
* coherency though in all cases. And for copyback caches we will need
* to push cached data as well.
*/
#define CACHE_INIT CACR_CINVA
#define CACHE_INVALIDATE CACR_CINVA
#define CACHE_INVALIDATED CACR_CINVA
#define ACR0_MODE ((CONFIG_RAMBASE & 0xff000000) + \
(0x000f0000) + \
(ACR_ENABLE + ACR_ANY + CACHE_TYPE))
#define ACR1_MODE 0
/****************************************************************************/
#endif /* m53xxsim_h */
arch/m68k/include/asm/m5407sim.h
View file @ 6a7f6ec9
...@@ -14,6 +14,11 @@ ...@@ -14,6 +14,11 @@
#define m5407sim_h #define m5407sim_h
/****************************************************************************/ /****************************************************************************/
#define CPU_NAME "COLDFIRE(m5407)"
#define CPU_INSTR_PER_JIFFY 3
#include <asm/m54xxacr.h>
/* /*
* Define the 5407 SIM register set addresses. * Define the 5407 SIM register set addresses.
*/ */
...@@ -73,6 +78,9 @@ ...@@ -73,6 +78,9 @@
#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ #define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */
#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ #define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */
#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */
#define MCFUART_BASE2 0x200 /* Base address of UART2 */
#define MCFSIM_PADDR (MCF_MBAR + 0x244) #define MCFSIM_PADDR (MCF_MBAR + 0x244)
#define MCFSIM_PADAT (MCF_MBAR + 0x248) #define MCFSIM_PADAT (MCF_MBAR + 0x248)
...@@ -117,39 +125,5 @@ ...@@ -117,39 +125,5 @@
#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ #define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ #define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
/*
* Define the Cache register flags.
*/
#define CACR_DEC 0x80000000 /* Enable data cache */
#define CACR_DWP 0x40000000 /* Data write protection */
#define CACR_DESB 0x20000000 /* Enable data store buffer */
#define CACR_DDPI 0x10000000 /* Disable CPUSHL */
#define CACR_DHCLK 0x08000000 /* Half data cache lock mode */
#define CACR_DDCM_WT 0x00000000 /* Write through cache*/
#define CACR_DDCM_CP 0x02000000 /* Copyback cache */
#define CACR_DDCM_P 0x04000000 /* No cache, precise */
#define CACR_DDCM_IMP 0x06000000 /* No cache, imprecise */
#define CACR_DCINVA 0x01000000 /* Invalidate data cache */
#define CACR_BEC 0x00080000 /* Enable branch cache */
#define CACR_BCINVA 0x00040000 /* Invalidate branch cache */
#define CACR_IEC 0x00008000 /* Enable instruction cache */
#define CACR_DNFB 0x00002000 /* Inhibited fill buffer */
#define CACR_IDPI 0x00001000 /* Disable CPUSHL */
#define CACR_IHLCK 0x00000800 /* Intruction cache half lock */
#define CACR_IDCM 0x00000400 /* Intruction cache inhibit */
#define CACR_ICINVA 0x00000100 /* Invalidate instr cache */
#define ACR_BASE_POS 24 /* Address Base */
#define ACR_MASK_POS 16 /* Address Mask */
#define ACR_ENABLE 0x00008000 /* Enable address */
#define ACR_USER 0x00000000 /* User mode access only */
#define ACR_SUPER 0x00002000 /* Supervisor mode only */
#define ACR_ANY 0x00004000 /* Match any access mode */
#define ACR_CM_WT 0x00000000 /* Write through mode */
#define ACR_CM_CP 0x00000020 /* Copyback mode */
#define ACR_CM_OFF_PRE 0x00000040 /* No cache, precise */
#define ACR_CM_OFF_IMP 0x00000060 /* No cache, imprecise */
#define ACR_WPROTECT 0x00000004 /* Write protect */
/****************************************************************************/ /****************************************************************************/
#endif /* m5407sim_h */ #endif /* m5407sim_h */
arch/m68k/include/asm/m54xxacr.h 0 → 100644
View file @ 6a7f6ec9
/*
* Bit definitions for the MCF54xx ACR and CACR registers.
*/
#ifndef m54xxacr_h
#define m54xxacr_h
/*
* Define the Cache register flags.
*/
#define CACR_DEC 0x80000000 /* Enable data cache */
#define CACR_DWP 0x40000000 /* Data write protection */
#define CACR_DESB 0x20000000 /* Enable data store buffer */
#define CACR_DDPI 0x10000000 /* Disable invalidation by CPUSHL */
#define CACR_DHCLK 0x08000000 /* Half data cache lock mode */
#define CACR_DDCM_WT 0x00000000 /* Write through cache*/
#define CACR_DDCM_CP 0x02000000 /* Copyback cache */
#define CACR_DDCM_P 0x04000000 /* No cache, precise */
#define CACR_DDCM_IMP 0x06000000 /* No cache, imprecise */
#define CACR_DCINVA 0x01000000 /* Invalidate data cache */
#define CACR_BEC 0x00080000 /* Enable branch cache */
#define CACR_BCINVA 0x00040000 /* Invalidate branch cache */
#define CACR_IEC 0x00008000 /* Enable instruction cache */
#define CACR_DNFB 0x00002000 /* Inhibited fill buffer */
#define CACR_IDPI 0x00001000 /* Disable CPUSHL */
#define CACR_IHLCK 0x00000800 /* Intruction cache half lock */
#define CACR_IDCM 0x00000400 /* Intruction cache inhibit */
#define CACR_ICINVA 0x00000100 /* Invalidate instr cache */
#define CACR_EUSP 0x00000020 /* Enable separate user a7 */
#define ACR_BASE_POS 24 /* Address Base */
#define ACR_MASK_POS 16 /* Address Mask */
#define ACR_ENABLE 0x00008000 /* Enable address */
#define ACR_USER 0x00000000 /* User mode access only */
#define ACR_SUPER 0x00002000 /* Supervisor mode only */
#define ACR_ANY 0x00004000 /* Match any access mode */
#define ACR_CM_WT 0x00000000 /* Write through mode */
#define ACR_CM_CP 0x00000020 /* Copyback mode */
#define ACR_CM_OFF_PRE 0x00000040 /* No cache, precise */
#define ACR_CM_OFF_IMP 0x00000060 /* No cache, imprecise */
#define ACR_CM 0x00000060 /* Cache mode mask */
#define ACR_WPROTECT 0x00000004 /* Write protect */
#if defined(CONFIG_M5407)
#define ICACHE_SIZE 0x4000 /* instruction - 16k */
#define DCACHE_SIZE 0x2000 /* data - 8k */
#elif defined(CONFIG_M54xx)
#define ICACHE_SIZE 0x8000 /* instruction - 32k */
#define DCACHE_SIZE 0x8000 /* data - 32k */
#endif
#define CACHE_LINE_SIZE 0x0010 /* 16 bytes */
#define CACHE_WAYS 4 /* 4 ways */
/*
* Version 4 cores have a true harvard style separate instruction
* and data cache. Enable data and instruction caches, also enable write
* buffers and branch accelerator.
*/
/* attention : enabling CACR_DESB requires a "nop" to flush the store buffer */
/* use '+' instead of '|' for assembler's sake */
/* Enable data cache */
/* Enable data store buffer */
/* outside ACRs : No cache, precise */
/* Enable instruction+branch caches */
#if defined(CONFIG_M5407)
#define CACHE_MODE (CACR_DEC+CACR_DESB+CACR_DDCM_P+CACR_BEC+CACR_IEC)
#else
#define CACHE_MODE (CACR_DEC+CACR_DESB+CACR_DDCM_P+CACR_BEC+CACR_IEC+CACR_EUSP)
#endif
#if defined(CONFIG_CACHE_COPYBACK)
#define DATA_CACHE_MODE (ACR_ENABLE+ACR_ANY+ACR_CM_CP)
#else
#define DATA_CACHE_MODE (ACR_ENABLE+ACR_ANY+ACR_CM_WT)
#endif
#define INSN_CACHE_MODE (ACR_ENABLE+ACR_ANY)
#define CACHE_INIT (CACR_DCINVA+CACR_BCINVA+CACR_ICINVA)
#define CACHE_INVALIDATE (CACHE_MODE+CACR_DCINVA+CACR_BCINVA+CACR_ICINVA)
#define CACHE_INVALIDATEI (CACHE_MODE+CACR_BCINVA+CACR_ICINVA)
#define CACHE_INVALIDATED (CACHE_MODE+CACR_DCINVA)
#define ACR0_MODE (0x000f0000+DATA_CACHE_MODE)
#define ACR1_MODE 0
#define ACR2_MODE (0x000f0000+INSN_CACHE_MODE)
#define ACR3_MODE 0
#if ((DATA_CACHE_MODE & ACR_CM) == ACR_CM_CP)
/* Copyback cache mode must push dirty cache lines first */
#define CACHE_PUSH
#endif
#endif /* m54xxacr_h */
arch/m68k/include/asm/m548xgpt.h → arch/m68k/include/asm/m54xxgpt.h
View file @ 6a7f6ec9
/* /*
* File: m548xgpt.h * File: m54xxgpt.h
* Purpose: Register and bit definitions for the MCF548X * Purpose: Register and bit definitions for the MCF54XX
* *
* Notes: * Notes:
* *
*/ */
#ifndef m548xgpt_h #ifndef m54xxgpt_h
#define m548xgpt_h #define m54xxgpt_h
/********************************************************************* /*********************************************************************
* *
...@@ -87,4 +87,4 @@ ...@@ -87,4 +87,4 @@
/********************************************************************/ /********************************************************************/
#endif /* m548xgpt_h */ #endif /* m54xxgpt_h */
arch/m68k/include/asm/m548xsim.h → arch/m68k/include/asm/m54xxsim.h
View file @ 6a7f6ec9
/* /*
* m548xsim.h -- ColdFire 547x/548x System Integration Unit support. * m54xxsim.h -- ColdFire 547x/548x System Integration Unit support.
*/ */
#ifndef m548xsim_h #ifndef m54xxsim_h
#define m548xsim_h #define m54xxsim_h
#define MCFINT_VECBASE 64 #define CPU_NAME "COLDFIRE(m54xx)"
#define CPU_INSTR_PER_JIFFY 2
#include <asm/m54xxacr.h>
#define MCFINT_VECBASE 64
/* /*
* Interrupt Controller Registers * Interrupt Controller Registers
...@@ -21,6 +26,14 @@ ...@@ -21,6 +26,14 @@
#define MCFINTC_IACKL 0x19 /* */ #define MCFINTC_IACKL 0x19 /* */
#define MCFINTC_ICR0 0x40 /* Base ICR register */ #define MCFINTC_ICR0 0x40 /* Base ICR register */
/*
* UART module.
*/
#define MCFUART_BASE1 0x8600 /* Base address of UART1 */
#define MCFUART_BASE2 0x8700 /* Base address of UART2 */
#define MCFUART_BASE3 0x8800 /* Base address of UART3 */
#define MCFUART_BASE4 0x8900 /* Base address of UART4 */
/* /*
* Define system peripheral IRQ usage. * Define system peripheral IRQ usage.
*/ */
...@@ -52,4 +65,4 @@ ...@@ -52,4 +65,4 @@
#define MCF_PAR_PSC_RTS_RTS (0x30) #define MCF_PAR_PSC_RTS_RTS (0x30)
#define MCF_PAR_PSC_CANRX (0x40) #define MCF_PAR_PSC_CANRX (0x40)
#endif /* m548xsim_h */ #endif /* m54xxsim_h */
arch/m68k/include/asm/mcfcache.h deleted 100644 → 0
View file @ c6fa63c6
/****************************************************************************/
/*
* mcfcache.h -- ColdFire CPU cache support code
*
* (C) Copyright 2004, Greg Ungerer <gerg@snapgear.com>
*/
/****************************************************************************/
#ifndef __M68KNOMMU_MCFCACHE_H
#define __M68KNOMMU_MCFCACHE_H
/****************************************************************************/
/*
* The different ColdFire families have different cache arrangments.
* Everything from a small instruction only cache, to configurable
* data and/or instruction cache, to unified instruction/data, to
* harvard style separate instruction and data caches.
*/
#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
/*
* Simple version 2 core cache. These have instruction cache only,
* we just need to invalidate it and enable it.
*/
.macro CACHE_ENABLE
movel #0x01000000,%d0 /* invalidate cache cmd */
movec %d0,%CACR /* do invalidate cache */
movel #0x80000100,%d0 /* setup cache mask */
movec %d0,%CACR /* enable cache */
.endm
#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */
#if defined(CONFIG_M523x) || defined(CONFIG_M527x)
/*
* New version 2 cores have a configurable split cache arrangement.
* For now I am just enabling instruction cache - but ultimately I
* think a split instruction/data cache would be better.
*/
.macro CACHE_ENABLE
movel #0x01400000,%d0
movec %d0,%CACR /* invalidate cache */
nop
movel #0x0000c000,%d0 /* set SDRAM cached only */
movec %d0,%ACR0
movel #0x00000000,%d0 /* no other regions cached */
movec %d0,%ACR1
movel #0x80400100,%d0 /* configure cache */
movec %d0,%CACR /* enable cache */
nop
.endm
#endif /* CONFIG_M523x || CONFIG_M527x */
#if defined(CONFIG_M528x)
.macro CACHE_ENABLE
nop
movel #0x01000000, %d0
movec %d0, %CACR /* Invalidate cache */
nop
movel #0x0000c020, %d0 /* Set SDRAM cached only */
movec %d0, %ACR0
movel #0x00000000, %d0 /* No other regions cached */
movec %d0, %ACR1
movel #0x80000200, %d0 /* Setup cache mask */
movec %d0, %CACR /* Enable cache */
nop
.endm
#endif /* CONFIG_M528x */
#if defined(CONFIG_M5249) || defined(CONFIG_M5307)
/*
* The version 3 core cache. Oddly enough the version 2 core 5249
* has the same SDRAM and cache setup as the version 3 cores.
* This is a single unified instruction/data cache.
*/
.macro CACHE_ENABLE
movel #0x01000000,%d0 /* invalidate whole cache */
movec %d0,%CACR
nop
#if defined(DEBUGGER_COMPATIBLE_CACHE) || defined(CONFIG_SECUREEDGEMP3)
movel #0x0000c000,%d0 /* set SDRAM cached (write-thru) */
#else
movel #0x0000c020,%d0 /* set SDRAM cached (copyback) */
#endif
movec %d0,%ACR0
movel #0x00000000,%d0 /* no other regions cached */
movec %d0,%ACR1
movel #0xa0000200,%d0 /* enable cache */
movec %d0,%CACR
nop
.endm
#endif /* CONFIG_M5249 || CONFIG_M5307 */
#if defined(CONFIG_M532x)
.macro CACHE_ENABLE
movel #0x01000000,%d0 /* invalidate cache cmd */
movec %d0,%CACR /* do invalidate cache */
nop
movel #0x4001C000,%d0 /* set SDRAM cached (write-thru) */
movec %d0,%ACR0
movel #0x00000000,%d0 /* no other regions cached */
movec %d0,%ACR1
movel #0x80000200,%d0 /* setup cache mask */
movec %d0,%CACR /* enable cache */
nop
.endm
#endif /* CONFIG_M532x */
#if defined(CONFIG_M5407) || defined(CONFIG_M548x)
/*
* Version 4 cores have a true harvard style separate instruction
* and data cache. Invalidate and enable cache, also enable write
* buffers and branch accelerator.
*/
.macro CACHE_ENABLE
movel #0x01040100,%d0 /* invalidate whole cache */
movec %d0,%CACR
nop
movel #0x000fc000,%d0 /* set SDRAM cached only */
movec %d0, %ACR0
movel #0x00000000,%d0 /* no other regions cached */
movec %d0, %ACR1
movel #0x000fc000,%d0 /* set SDRAM cached only */
movec %d0, %ACR2
movel #0x00000000,%d0 /* no other regions cached */
movec %d0, %ACR3
movel #0xb6088400,%d0 /* enable caches */
movec %d0,%CACR
nop
.endm
#endif /* CONFIG_M5407 */
#if defined(CONFIG_M520x)
.macro CACHE_ENABLE
move.l #0x01000000,%d0 /* invalidate whole cache */
movec %d0,%CACR
nop
move.l #0x0000c000,%d0 /* set SDRAM cached (write-thru) */
movec %d0,%ACR0
move.l #0x00000000,%d0 /* no other regions cached */
movec %d0,%ACR1
move.l #0x80400000,%d0 /* enable 8K instruction cache */
movec %d0,%CACR
nop
.endm
#endif /* CONFIG_M520x */
/****************************************************************************/
#endif /* __M68KNOMMU_MCFCACHE_H */
arch/m68k/include/asm/mcfsim.h
View file @ 6a7f6ec9
...@@ -41,8 +41,8 @@ ...@@ -41,8 +41,8 @@
#elif defined(CONFIG_M5407) #elif defined(CONFIG_M5407)
#include <asm/m5407sim.h> #include <asm/m5407sim.h>
#include <asm/mcfintc.h> #include <asm/mcfintc.h>
#elif defined(CONFIG_M548x) #elif defined(CONFIG_M54xx)
#include <asm/m548xsim.h> #include <asm/m54xxsim.h>
#endif #endif
/****************************************************************************/ /****************************************************************************/
......
arch/m68k/include/asm/mcfuart.h
View file @ 6a7f6ec9
...@@ -12,49 +12,6 @@ ...@@ -12,49 +12,6 @@
#define mcfuart_h #define mcfuart_h
/****************************************************************************/ /****************************************************************************/
/*
* Define the base address of the UARTS within the MBAR address
* space.
*/
#if defined(CONFIG_M5272)
#define MCFUART_BASE1 0x100 /* Base address of UART1 */
#define MCFUART_BASE2 0x140 /* Base address of UART2 */
#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e)
#if defined(CONFIG_NETtel)
#define MCFUART_BASE1 0x180 /* Base address of UART1 */
#define MCFUART_BASE2 0x140 /* Base address of UART2 */
#else
#define MCFUART_BASE1 0x140 /* Base address of UART1 */
#define MCFUART_BASE2 0x180 /* Base address of UART2 */
#endif
#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
#define MCFUART_BASE1 0x200 /* Base address of UART1 */
#define MCFUART_BASE2 0x240 /* Base address of UART2 */
#define MCFUART_BASE3 0x280 /* Base address of UART3 */
#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
#define MCFUART_BASE1 0x200 /* Base address of UART1 */
#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */
#else
#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */
#define MCFUART_BASE2 0x200 /* Base address of UART2 */
#endif
#elif defined(CONFIG_M520x)
#define MCFUART_BASE1 0x60000 /* Base address of UART1 */
#define MCFUART_BASE2 0x64000 /* Base address of UART2 */
#define MCFUART_BASE3 0x68000 /* Base address of UART2 */
#elif defined(CONFIG_M532x)
#define MCFUART_BASE1 0xfc060000 /* Base address of UART1 */
#define MCFUART_BASE2 0xfc064000 /* Base address of UART2 */
#define MCFUART_BASE3 0xfc068000 /* Base address of UART3 */
#elif defined(CONFIG_M548x)
#define MCFUART_BASE1 0x8600 /* on M548x */
#define MCFUART_BASE2 0x8700 /* on M548x */
#define MCFUART_BASE3 0x8800 /* on M548x */
#define MCFUART_BASE4 0x8900 /* on M548x */
#endif
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
...@@ -217,7 +174,7 @@ struct mcf_platform_uart { ...@@ -217,7 +174,7 @@ struct mcf_platform_uart {
#define MCFUART_URF_RXS 0xc0 /* Receiver status */ #define MCFUART_URF_RXS 0xc0 /* Receiver status */
#endif #endif
#if defined(CONFIG_M548x) #if defined(CONFIG_M54xx)
#define MCFUART_TXFIFOSIZE 512 #define MCFUART_TXFIFOSIZE 512
#elif defined(CONFIG_M5272) #elif defined(CONFIG_M5272)
#define MCFUART_TXFIFOSIZE 25 #define MCFUART_TXFIFOSIZE 25
......
arch/m68k/include/asm/processor.h
View file @ 6a7f6ec9
...@@ -20,23 +20,26 @@ ...@@ -20,23 +20,26 @@
static inline unsigned long rdusp(void) static inline unsigned long rdusp(void)
{ {
#ifdef CONFIG_COLDFIRE #ifdef CONFIG_COLDFIRE_SW_A7
extern unsigned int sw_usp; extern unsigned int sw_usp;
return sw_usp; return sw_usp;
#else #else
unsigned long usp; register unsigned long usp __asm__("a0");
__asm__ __volatile__("move %/usp,%0" : "=a" (usp)); /* move %usp,%a0 */
__asm__ __volatile__(".word 0x4e68" : "=a" (usp));
return usp; return usp;
#endif #endif
} }
static inline void wrusp(unsigned long usp) static inline void wrusp(unsigned long usp)
{ {
#ifdef CONFIG_COLDFIRE #ifdef CONFIG_COLDFIRE_SW_A7
extern unsigned int sw_usp; extern unsigned int sw_usp;
sw_usp = usp; sw_usp = usp;
#else #else
__asm__ __volatile__("move %0,%/usp" : : "a" (usp)); register unsigned long a0 __asm__("a0") = usp;
/* move %a0,%usp */
__asm__ __volatile__(".word 0x4e60" : : "a" (a0) );
#endif #endif
} }
......
arch/m68knommu/Kconfig
View file @ 6a7f6ec9
...@@ -75,6 +75,16 @@ config GENERIC_CLOCKEVENTS ...@@ -75,6 +75,16 @@ config GENERIC_CLOCKEVENTS
config NO_IOPORT config NO_IOPORT
def_bool y def_bool y
config COLDFIRE_SW_A7
bool
default n
config HAVE_CACHE_SPLIT
bool
config HAVE_CACHE_CB
bool
source "init/Kconfig" source "init/Kconfig"
source "kernel/Kconfig.freezer" source "kernel/Kconfig.freezer"
...@@ -107,69 +117,90 @@ config M68360 ...@@ -107,69 +117,90 @@ config M68360
config M5206 config M5206
bool "MCF5206" bool "MCF5206"
select COLDFIRE_SW_A7
help help
Motorola ColdFire 5206 processor support. Motorola ColdFire 5206 processor support.
config M5206e config M5206e
bool "MCF5206e" bool "MCF5206e"
select COLDFIRE_SW_A7
help help
Motorola ColdFire 5206e processor support. Motorola ColdFire 5206e processor support.
config M520x config M520x
bool "MCF520x" bool "MCF520x"
select GENERIC_CLOCKEVENTS select GENERIC_CLOCKEVENTS
select HAVE_CACHE_SPLIT
help help
Freescale Coldfire 5207/5208 processor support. Freescale Coldfire 5207/5208 processor support.
config M523x config M523x
bool "MCF523x" bool "MCF523x"
select GENERIC_CLOCKEVENTS select GENERIC_CLOCKEVENTS
select HAVE_CACHE_SPLIT
help help
Freescale Coldfire 5230/1/2/4/5 processor support Freescale Coldfire 5230/1/2/4/5 processor support
config M5249 config M5249
bool "MCF5249" bool "MCF5249"
select COLDFIRE_SW_A7
help help
Motorola ColdFire 5249 processor support. Motorola ColdFire 5249 processor support.
config M5271 config M5271
bool "MCF5271" bool "MCF5271"
select HAVE_CACHE_SPLIT
help help
Freescale (Motorola) ColdFire 5270/5271 processor support. Freescale (Motorola) ColdFire 5270/5271 processor support.
config M5272 config M5272
bool "MCF5272" bool "MCF5272"
select COLDFIRE_SW_A7
help help
Motorola ColdFire 5272 processor support. Motorola ColdFire 5272 processor support.
config M5275 config M5275
bool "MCF5275" bool "MCF5275"
select HAVE_CACHE_SPLIT
help help
Freescale (Motorola) ColdFire 5274/5275 processor support. Freescale (Motorola) ColdFire 5274/5275 processor support.
config M528x config M528x
bool "MCF528x" bool "MCF528x"
select GENERIC_CLOCKEVENTS select GENERIC_CLOCKEVENTS
select HAVE_CACHE_SPLIT
help help
Motorola ColdFire 5280/5282 processor support. Motorola ColdFire 5280/5282 processor support.
config M5307 config M5307
bool "MCF5307" bool "MCF5307"
select COLDFIRE_SW_A7
select HAVE_CACHE_CB
help help
Motorola ColdFire 5307 processor support. Motorola ColdFire 5307 processor support.
config M532x config M532x
bool "MCF532x" bool "MCF532x"
select HAVE_CACHE_CB
help help
Freescale (Motorola) ColdFire 532x processor support. Freescale (Motorola) ColdFire 532x processor support.
config M5407 config M5407
bool "MCF5407" bool "MCF5407"
select COLDFIRE_SW_A7
select HAVE_CACHE_CB
help help
Motorola ColdFire 5407 processor support. Motorola ColdFire 5407 processor support.
config M547x
bool "MCF547x"
select HAVE_CACHE_CB
help
Freescale ColdFire 5470/5471/5472/5473/5474/5475 processor support.
config M548x config M548x
bool "MCF548x" bool "MCF548x"
select HAVE_CACHE_CB
help help
Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support. Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support.
...@@ -181,9 +212,14 @@ config M527x ...@@ -181,9 +212,14 @@ config M527x
select GENERIC_CLOCKEVENTS select GENERIC_CLOCKEVENTS
default y default y
config M54xx
bool
depends on (M548x || M547x)
default y
config COLDFIRE config COLDFIRE
bool bool
depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M532x || M5407 || M548x) depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M532x || M5407 || M54xx)
select GENERIC_GPIO select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
default y default y
...@@ -230,6 +266,46 @@ config OLDMASK ...@@ -230,6 +266,46 @@ config OLDMASK
Build support for the older revision ColdFire 5307 silicon. Build support for the older revision ColdFire 5307 silicon.
Specifically this is the 1H55J mask revision. Specifically this is the 1H55J mask revision.
if HAVE_CACHE_SPLIT
choice
prompt "Split Cache Configuration"
default CACHE_I
config CACHE_I
bool "Instruction"
help
Use all of the ColdFire CPU cache memory as an instruction cache.
config CACHE_D
bool "Data"
help
Use all of the ColdFire CPU cache memory as a data cache.
config CACHE_BOTH
bool "Both"
help
Split the ColdFire CPU cache, and use half as an instruction cache
and half as a data cache.
endchoice
endif
if HAVE_CACHE_CB
choice
prompt "Data cache mode"
default CACHE_WRITETHRU
config CACHE_WRITETHRU
bool "Write-through"
help
The ColdFire CPU cache is set into Write-through mode.
config CACHE_COPYBACK
bool "Copy-back"
help
The ColdFire CPU cache is set into Copy-back mode.
endchoice
endif
comment "Platform" comment "Platform"
config PILOT3 config PILOT3
...@@ -245,16 +321,16 @@ config XCOPILOT_BUGS ...@@ -245,16 +321,16 @@ config XCOPILOT_BUGS
Support the bugs of Xcopilot. Support the bugs of Xcopilot.
config UC5272 config UC5272
bool 'Arcturus Networks uC5272 dimm board support' bool 'Arcturus Networks uC5272 dimm board support'
depends on M5272 depends on M5272
help help
Support for the Arcturus Networks uC5272 dimm board. Support for the Arcturus Networks uC5272 dimm board.
config UC5282 config UC5282
bool "Arcturus Networks uC5282 board support" bool "Arcturus Networks uC5282 board support"
depends on M528x depends on M528x
help help
Support for the Arcturus Networks uC5282 dimm board. Support for the Arcturus Networks uC5282 dimm board.
config UCSIMM config UCSIMM
bool "uCsimm module support" bool "uCsimm module support"
...@@ -279,7 +355,7 @@ config DIRECT_IO_ACCESS ...@@ -279,7 +355,7 @@ config DIRECT_IO_ACCESS
depends on (UCSIMM || UCDIMM || DRAGEN2) depends on (UCSIMM || UCDIMM || DRAGEN2)
help help
Disable the CPU internal registers protection in user mode, Disable the CPU internal registers protection in user mode,
to allow a user application to read/write them. to allow a user application to read/write them.
config INIT_LCD config INIT_LCD
bool "Initialize LCD" bool "Initialize LCD"
...@@ -517,7 +593,7 @@ config EMAC_INC ...@@ -517,7 +593,7 @@ config EMAC_INC
depends on (SOM5282EM) depends on (SOM5282EM)
config SNEHA config SNEHA
bool bool
default y default y
depends on CPU16B depends on CPU16B
......
arch/m68knommu/Makefile
View file @ 6a7f6ec9
...@@ -25,7 +25,7 @@ platform-$(CONFIG_M528x) := 528x ...@@ -25,7 +25,7 @@ platform-$(CONFIG_M528x) := 528x
platform-$(CONFIG_M5307) := 5307 platform-$(CONFIG_M5307) := 5307
platform-$(CONFIG_M532x) := 532x platform-$(CONFIG_M532x) := 532x
platform-$(CONFIG_M5407) := 5407 platform-$(CONFIG_M5407) := 5407
platform-$(CONFIG_M548x) := 548x platform-$(CONFIG_M54xx) := 54xx
PLATFORM := $(platform-y) PLATFORM := $(platform-y)
board-$(CONFIG_PILOT) := pilot board-$(CONFIG_PILOT) := pilot
...@@ -74,7 +74,7 @@ cpuclass-$(CONFIG_M528x) := coldfire ...@@ -74,7 +74,7 @@ cpuclass-$(CONFIG_M528x) := coldfire
cpuclass-$(CONFIG_M5307) := coldfire cpuclass-$(CONFIG_M5307) := coldfire
cpuclass-$(CONFIG_M532x) := coldfire cpuclass-$(CONFIG_M532x) := coldfire
cpuclass-$(CONFIG_M5407) := coldfire cpuclass-$(CONFIG_M5407) := coldfire
cpuclass-$(CONFIG_M548x) := coldfire cpuclass-$(CONFIG_M54xx) := coldfire
cpuclass-$(CONFIG_M68328) := 68328 cpuclass-$(CONFIG_M68328) := 68328
cpuclass-$(CONFIG_M68EZ328) := 68328 cpuclass-$(CONFIG_M68EZ328) := 68328
cpuclass-$(CONFIG_M68VZ328) := 68328 cpuclass-$(CONFIG_M68VZ328) := 68328
...@@ -91,18 +91,18 @@ export PLATFORM BOARD MODEL CPUCLASS ...@@ -91,18 +91,18 @@ export PLATFORM BOARD MODEL CPUCLASS
# Some CFLAG additions based on specific CPU type. # Some CFLAG additions based on specific CPU type.
# #
cflags-$(CONFIG_M5206) := $(call cc-option,-mcpu=5206,-m5200) cflags-$(CONFIG_M5206) := $(call cc-option,-mcpu=5206,-m5200)
cflags-$(CONFIG_M5206e) := $(call cc-option,-m5206e,-m5200) cflags-$(CONFIG_M5206e) := $(call cc-option,-mcpu=5206e,-m5200)
cflags-$(CONFIG_M520x) := $(call cc-option,-mcpu=5208,-m5200) cflags-$(CONFIG_M520x) := $(call cc-option,-mcpu=5208,-m5200)
cflags-$(CONFIG_M523x) := $(call cc-option,-mcpu=523x,-m5307) cflags-$(CONFIG_M523x) := $(call cc-option,-mcpu=523x,-m5307)
cflags-$(CONFIG_M5249) := $(call cc-option,-mcpu=5249,-m5200) cflags-$(CONFIG_M5249) := $(call cc-option,-mcpu=5249,-m5200)
cflags-$(CONFIG_M5271) := $(call cc-option,-mcpu=5271,-m5307) cflags-$(CONFIG_M5271) := $(call cc-option,-mcpu=5271,-m5307)
cflags-$(CONFIG_M5272) := $(call cc-option,-mcpu=5272,-m5307) cflags-$(CONFIG_M5272) := $(call cc-option,-mcpu=5272,-m5307)
cflags-$(CONFIG_M5275) := $(call cc-option,-mcpu=5275,-m5307) cflags-$(CONFIG_M5275) := $(call cc-option,-mcpu=5275,-m5307)
cflags-$(CONFIG_M528x) := $(call cc-option,-m528x,-m5307) cflags-$(CONFIG_M528x) := $(call cc-option,-mcpu=528x,-m5307)
cflags-$(CONFIG_M5307) := $(call cc-option,-m5307,-m5200) cflags-$(CONFIG_M5307) := $(call cc-option,-mcpu=5307,-m5200)
cflags-$(CONFIG_M532x) := $(call cc-option,-mcpu=532x,-m5307) cflags-$(CONFIG_M532x) := $(call cc-option,-mcpu=532x,-m5307)
cflags-$(CONFIG_M5407) := $(call cc-option,-m5407,-m5200) cflags-$(CONFIG_M5407) := $(call cc-option,-mcpu=5407,-m5200)
cflags-$(CONFIG_M548x) := $(call cc-option,-m5407,-m5200) cflags-$(CONFIG_M54xx) := $(call cc-option,-mcpu=5475,-m5200)
cflags-$(CONFIG_M68328) := -m68000 cflags-$(CONFIG_M68328) := -m68000
cflags-$(CONFIG_M68EZ328) := -m68000 cflags-$(CONFIG_M68EZ328) := -m68000
cflags-$(CONFIG_M68VZ328) := -m68000 cflags-$(CONFIG_M68VZ328) := -m68000
......
arch/m68knommu/kernel/setup.c
View file @ 6a7f6ec9
...@@ -55,55 +55,29 @@ void (*mach_halt)(void); ...@@ -55,55 +55,29 @@ void (*mach_halt)(void);
void (*mach_power_off)(void); void (*mach_power_off)(void);
#ifdef CONFIG_M68328 #ifdef CONFIG_M68328
#define CPU "MC68328" #define CPU_NAME "MC68328"
#endif #endif
#ifdef CONFIG_M68EZ328 #ifdef CONFIG_M68EZ328
#define CPU "MC68EZ328" #define CPU_NAME "MC68EZ328"
#endif #endif
#ifdef CONFIG_M68VZ328 #ifdef CONFIG_M68VZ328
#define CPU "MC68VZ328" #define CPU_NAME "MC68VZ328"
#endif #endif
#ifdef CONFIG_M68360 #ifdef CONFIG_M68360
#define CPU "MC68360" #define CPU_NAME "MC68360"
#endif #endif
#if defined(CONFIG_M5206) #ifndef CPU_NAME
#define CPU "COLDFIRE(m5206)" #define CPU_NAME "UNKNOWN"
#endif #endif
#if defined(CONFIG_M5206e)
#define CPU "COLDFIRE(m5206e)" /*
#endif * Different cores have different instruction execution timings.
#if defined(CONFIG_M520x) * The old/traditional 68000 cores are basically all the same, at 16.
#define CPU "COLDFIRE(m520x)" * The ColdFire cores vary a little, their values are defined in their
#endif * headers. We default to the standard 68000 value here.
#if defined(CONFIG_M523x) */
#define CPU "COLDFIRE(m523x)" #ifndef CPU_INSTR_PER_JIFFY
#endif #define CPU_INSTR_PER_JIFFY 16
#if defined(CONFIG_M5249)
#define CPU "COLDFIRE(m5249)"
#endif
#if defined(CONFIG_M5271)
#define CPU "COLDFIRE(m5270/5271)"
#endif
#if defined(CONFIG_M5272)
#define CPU "COLDFIRE(m5272)"
#endif
#if defined(CONFIG_M5275)
#define CPU "COLDFIRE(m5274/5275)"
#endif
#if defined(CONFIG_M528x)
#define CPU "COLDFIRE(m5280/5282)"
#endif
#if defined(CONFIG_M5307)
#define CPU "COLDFIRE(m5307)"
#endif
#if defined(CONFIG_M532x)
#define CPU "COLDFIRE(m532x)"
#endif
#if defined(CONFIG_M5407)
#define CPU "COLDFIRE(m5407)"
#endif
#ifndef CPU
#define CPU "UNKNOWN"
#endif #endif
extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end; extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end;
...@@ -208,7 +182,7 @@ void __init setup_arch(char **cmdline_p) ...@@ -208,7 +182,7 @@ void __init setup_arch(char **cmdline_p)
command_line[sizeof(command_line) - 1] = 0; command_line[sizeof(command_line) - 1] = 0;
#endif /* CONFIG_UBOOT */ #endif /* CONFIG_UBOOT */
printk(KERN_INFO "\x0F\r\n\nuClinux/" CPU "\n"); printk(KERN_INFO "\x0F\r\n\nuClinux/" CPU_NAME "\n");
#ifdef CONFIG_UCDIMM #ifdef CONFIG_UCDIMM
printk(KERN_INFO "uCdimm by Lineo, Inc. <www.lineo.com>\n"); printk(KERN_INFO "uCdimm by Lineo, Inc. <www.lineo.com>\n");
...@@ -257,11 +231,6 @@ void __init setup_arch(char **cmdline_p) ...@@ -257,11 +231,6 @@ void __init setup_arch(char **cmdline_p)
memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
boot_command_line[COMMAND_LINE_SIZE-1] = 0; boot_command_line[COMMAND_LINE_SIZE-1] = 0;
#ifdef DEBUG
if (strlen(*cmdline_p))
printk(KERN_DEBUG "Command line: '%s'\n", *cmdline_p);
#endif
#if defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_DUMMY_CONSOLE) #if defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_DUMMY_CONSOLE)
conswitchp = &dummy_con; conswitchp = &dummy_con;
#endif #endif
...@@ -303,15 +272,10 @@ static int show_cpuinfo(struct seq_file *m, void *v) ...@@ -303,15 +272,10 @@ static int show_cpuinfo(struct seq_file *m, void *v)
char *cpu, *mmu, *fpu; char *cpu, *mmu, *fpu;
u_long clockfreq; u_long clockfreq;
cpu = CPU; cpu = CPU_NAME;
mmu = "none"; mmu = "none";
fpu = "none"; fpu = "none";
clockfreq = (loops_per_jiffy * HZ) * CPU_INSTR_PER_JIFFY;
#ifdef CONFIG_COLDFIRE
clockfreq = (loops_per_jiffy * HZ) * 3;
#else
clockfreq = (loops_per_jiffy * HZ) * 16;
#endif
seq_printf(m, "CPU:\t\t%s\n" seq_printf(m, "CPU:\t\t%s\n"
"MMU:\t\t%s\n" "MMU:\t\t%s\n"
......
arch/m68knommu/mm/Makefile
View file @ 6a7f6ec9
...@@ -2,4 +2,4 @@ ...@@ -2,4 +2,4 @@
# Makefile for the linux m68knommu specific parts of the memory manager. # Makefile for the linux m68knommu specific parts of the memory manager.
# #
obj-y += init.o fault.o memory.o kmap.o obj-y += init.o kmap.o
arch/m68knommu/mm/fault.c deleted 100644 → 0
View file @ c6fa63c6
/*
* linux/arch/m68knommu/mm/fault.c
*
* Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>,
* Copyright (C) 2000 Lineo, Inc. (www.lineo.com)
*
* Based on:
*
* linux/arch/m68k/mm/fault.c
*
* Copyright (C) 1995 Hamish Macdonald
*/
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/kernel.h>
#include <linux/ptrace.h>
#include <asm/system.h>
#include <asm/pgtable.h>
extern void die_if_kernel(char *, struct pt_regs *, long);
/*
* This routine handles page faults. It determines the problem, and
* then passes it off to one of the appropriate routines.
*
* error_code:
* bit 0 == 0 means no page found, 1 means protection fault
* bit 1 == 0 means read, 1 means write
*
* If this routine detects a bad access, it returns 1, otherwise it
* returns 0.
*/
asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address,
unsigned long error_code)
{
#ifdef DEBUG
printk(KERN_DEBUG "regs->sr=%#x, regs->pc=%#lx, address=%#lx, %ld\n",
regs->sr, regs->pc, address, error_code);
#endif
/*
* Oops. The kernel tried to access some bad page. We'll have to
* terminate things with extreme prejudice.
*/
if ((unsigned long) address < PAGE_SIZE)
printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
else
printk(KERN_ALERT "Unable to handle kernel access");
printk(KERN_ALERT " at virtual address %08lx\n", address);
die_if_kernel("Oops", regs, error_code);
do_exit(SIGKILL);
return 1;
}
arch/m68knommu/mm/kmap.c
View file @ 6a7f6ec9
...@@ -35,15 +35,6 @@ void iounmap(void *addr) ...@@ -35,15 +35,6 @@ void iounmap(void *addr)
{ {
} }
/*
* __iounmap unmaps nearly everything, so be careful
* it doesn't free currently pointer/page tables anymore but it
* wans't used anyway and might be added later.
*/
void __iounmap(void *addr, unsigned long size)
{
}
/* /*
* Set new cache mode for some kernel address space. * Set new cache mode for some kernel address space.
* The caller must push data for that range itself, if such data may already * The caller must push data for that range itself, if such data may already
......
arch/m68knommu/mm/memory.c deleted 100644 → 0
View file @ c6fa63c6
/*
* linux/arch/m68knommu/mm/memory.c
*
* Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
* Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
*
* Based on:
*
* linux/arch/m68k/mm/memory.c
*
* Copyright (C) 1995 Hamish Macdonald
*/
#include <linux/mm.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/types.h>
#include <asm/segment.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/system.h>
/*
* Map some physical address range into the kernel address space.
*/
unsigned long kernel_map(unsigned long paddr, unsigned long size,
int nocacheflag, unsigned long *memavailp )
{
return paddr;
}
arch/m68knommu/platform/548x/config.c → arch/m68knommu/platform/54xx/config.c
View file @ 6a7f6ec9
/***************************************************************************/ /***************************************************************************/
/* /*
* linux/arch/m68knommu/platform/548x/config.c * linux/arch/m68knommu/platform/54xx/config.c
* *
* Copyright (C) 2010, Philippe De Muyter <phdm@macqel.be> * Copyright (C) 2010, Philippe De Muyter <phdm@macqel.be>
*/ */
...@@ -15,13 +15,13 @@ ...@@ -15,13 +15,13 @@
#include <linux/io.h> #include <linux/io.h>
#include <asm/machdep.h> #include <asm/machdep.h>
#include <asm/coldfire.h> #include <asm/coldfire.h>
#include <asm/m548xsim.h> #include <asm/m54xxsim.h>
#include <asm/mcfuart.h> #include <asm/mcfuart.h>
#include <asm/m548xgpt.h> #include <asm/m54xxgpt.h>
/***************************************************************************/ /***************************************************************************/
static struct mcf_platform_uart m548x_uart_platform[] = { static struct mcf_platform_uart m54xx_uart_platform[] = {
{ {
.mapbase = MCF_MBAR + MCFUART_BASE1, .mapbase = MCF_MBAR + MCFUART_BASE1,
.irq = 64 + 35, .irq = 64 + 35,
...@@ -40,20 +40,20 @@ static struct mcf_platform_uart m548x_uart_platform[] = { ...@@ -40,20 +40,20 @@ static struct mcf_platform_uart m548x_uart_platform[] = {
}, },
}; };
static struct platform_device m548x_uart = { static struct platform_device m54xx_uart = {
.name = "mcfuart", .name = "mcfuart",
.id = 0, .id = 0,
.dev.platform_data = m548x_uart_platform, .dev.platform_data = m54xx_uart_platform,
}; };
static struct platform_device *m548x_devices[] __initdata = { static struct platform_device *m54xx_devices[] __initdata = {
&m548x_uart, &m54xx_uart,
}; };
/***************************************************************************/ /***************************************************************************/
static void __init m548x_uart_init_line(int line, int irq) static void __init m54xx_uart_init_line(int line, int irq)
{ {
int rts_cts; int rts_cts;
...@@ -72,18 +72,18 @@ static void __init m548x_uart_init_line(int line, int irq) ...@@ -72,18 +72,18 @@ static void __init m548x_uart_init_line(int line, int irq)
MCF_MBAR + MCF_PAR_PSC(line)); MCF_MBAR + MCF_PAR_PSC(line));
} }
static void __init m548x_uarts_init(void) static void __init m54xx_uarts_init(void)
{ {
const int nrlines = ARRAY_SIZE(m548x_uart_platform); const int nrlines = ARRAY_SIZE(m54xx_uart_platform);
int line; int line;
for (line = 0; (line < nrlines); line++) for (line = 0; (line < nrlines); line++)
m548x_uart_init_line(line, m548x_uart_platform[line].irq); m54xx_uart_init_line(line, m54xx_uart_platform[line].irq);
} }
/***************************************************************************/ /***************************************************************************/
static void mcf548x_reset(void) static void mcf54xx_reset(void)
{ {
/* disable interrupts and enable the watchdog */ /* disable interrupts and enable the watchdog */
asm("movew #0x2700, %sr\n"); asm("movew #0x2700, %sr\n");
...@@ -97,8 +97,8 @@ static void mcf548x_reset(void) ...@@ -97,8 +97,8 @@ static void mcf548x_reset(void)
void __init config_BSP(char *commandp, int size) void __init config_BSP(char *commandp, int size)
{ {
mach_reset = mcf548x_reset; mach_reset = mcf54xx_reset;
m548x_uarts_init(); m54xx_uarts_init();
} }
/***************************************************************************/ /***************************************************************************/
...@@ -106,7 +106,7 @@ void __init config_BSP(char *commandp, int size) ...@@ -106,7 +106,7 @@ void __init config_BSP(char *commandp, int size)
static int __init init_BSP(void) static int __init init_BSP(void)
{ {
platform_add_devices(m548x_devices, ARRAY_SIZE(m548x_devices)); platform_add_devices(m54xx_devices, ARRAY_SIZE(m54xx_devices));
return 0; return 0;
} }
......
arch/m68knommu/platform/68328/ints.c
View file @ 6a7f6ec9
...@@ -179,8 +179,8 @@ void __init init_IRQ(void) ...@@ -179,8 +179,8 @@ void __init init_IRQ(void)
IMR = ~0; IMR = ~0;
for (i = 0; (i < NR_IRQS); i++) { for (i = 0; (i < NR_IRQS); i++) {
set_irq_chip(irq, &intc_irq_chip); set_irq_chip(i, &intc_irq_chip);
set_irq_handler(irq, handle_level_irq); set_irq_handler(i, handle_level_irq);
} }
} }
arch/m68knommu/platform/coldfire/Makefile
View file @ 6a7f6ec9
...@@ -14,7 +14,7 @@ ...@@ -14,7 +14,7 @@
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-$(CONFIG_COLDFIRE) += clk.o dma.o entry.o vectors.o obj-$(CONFIG_COLDFIRE) += cache.o clk.o dma.o entry.o vectors.o
obj-$(CONFIG_M5206) += timers.o intc.o obj-$(CONFIG_M5206) += timers.o intc.o
obj-$(CONFIG_M5206e) += timers.o intc.o obj-$(CONFIG_M5206e) += timers.o intc.o
obj-$(CONFIG_M520x) += pit.o intc-simr.o obj-$(CONFIG_M520x) += pit.o intc-simr.o
...@@ -26,7 +26,7 @@ obj-$(CONFIG_M528x) += pit.o intc-2.o ...@@ -26,7 +26,7 @@ obj-$(CONFIG_M528x) += pit.o intc-2.o
obj-$(CONFIG_M5307) += timers.o intc.o obj-$(CONFIG_M5307) += timers.o intc.o
obj-$(CONFIG_M532x) += timers.o intc-simr.o obj-$(CONFIG_M532x) += timers.o intc-simr.o
obj-$(CONFIG_M5407) += timers.o intc.o obj-$(CONFIG_M5407) += timers.o intc.o
obj-$(CONFIG_M548x) += sltimers.o intc-2.o obj-$(CONFIG_M54xx) += sltimers.o intc-2.o
obj-y += pinmux.o gpio.o obj-y += pinmux.o gpio.o
extra-y := head.o extra-y := head.o
arch/m68knommu/platform/coldfire/cache.c 0 → 100644
View file @ 6a7f6ec9
/***************************************************************************/
/*
* cache.c -- general ColdFire Cache maintainence code
*
* Copyright (C) 2010, Greg Ungerer (gerg@snapgear.com)
*/
/***************************************************************************/
#include <linux/kernel.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
/***************************************************************************/
#ifdef CACHE_PUSH
/***************************************************************************/
/*
* Use cpushl to push all dirty cache lines back to memory.
* Older versions of GAS don't seem to know how to generate the
* ColdFire cpushl instruction... Oh well, bit stuff it for now.
*/
void mcf_cache_push(void)
{
__asm__ __volatile__ (
"clrl %%d0\n\t"
"1:\n\t"
"movel %%d0,%%a0\n\t"
"2:\n\t"
".word 0xf468\n\t"
"addl %0,%%a0\n\t"
"cmpl %1,%%a0\n\t"
"blt 2b\n\t"
"addql #1,%%d0\n\t"
"cmpil %2,%%d0\n\t"
"bne 1b\n\t"
: /* No output */
: "i" (CACHE_LINE_SIZE),
"i" (DCACHE_SIZE / CACHE_WAYS),
"i" (CACHE_WAYS)
: "d0", "a0" );
}
/***************************************************************************/
#endif /* CACHE_PUSH */
/***************************************************************************/
arch/m68knommu/platform/coldfire/entry.S
View file @ 6a7f6ec9
...@@ -36,13 +36,16 @@ ...@@ -36,13 +36,16 @@
#include <asm/asm-offsets.h> #include <asm/asm-offsets.h>
#include <asm/entry.h> #include <asm/entry.h>
#ifdef CONFIG_COLDFIRE_SW_A7
/*
* Define software copies of the supervisor and user stack pointers.
*/
.bss .bss
sw_ksp: sw_ksp:
.long 0 .long 0
sw_usp: sw_usp:
.long 0 .long 0
#endif /* CONFIG_COLDFIRE_SW_A7 */
.text .text
...@@ -51,7 +54,6 @@ sw_usp: ...@@ -51,7 +54,6 @@ sw_usp:
.globl ret_from_exception .globl ret_from_exception
.globl ret_from_signal .globl ret_from_signal
.globl sys_call_table .globl sys_call_table
.globl ret_from_interrupt
.globl inthandler .globl inthandler
.globl fasthandler .globl fasthandler
...@@ -140,20 +142,7 @@ Luser_return: ...@@ -140,20 +142,7 @@ Luser_return:
jne Lwork_to_do /* still work to do */ jne Lwork_to_do /* still work to do */
Lreturn: Lreturn:
move #0x2700,%sr /* disable intrs */ RESTORE_USER
movel sw_usp,%a0 /* get usp */
movel %sp@(PT_OFF_PC),%a0@- /* copy exception program counter */
movel %sp@(PT_OFF_FORMATVEC),%a0@- /* copy exception format/vector/sr */
moveml %sp@,%d1-%d5/%a0-%a2
lea %sp@(32),%sp /* space for 8 regs */
movel %sp@+,%d0
addql #4,%sp /* orig d0 */
addl %sp@+,%sp /* stk adj */
addql #8,%sp /* remove exception */
movel %sp,sw_ksp /* save ksp */
subql #8,sw_usp /* set exception */
movel sw_usp,%sp /* restore usp */
rte
Lwork_to_do: Lwork_to_do:
movel %a0@(TI_FLAGS),%d1 /* get thread_info->flags */ movel %a0@(TI_FLAGS),%d1 /* get thread_info->flags */
...@@ -191,31 +180,7 @@ ENTRY(inthandler) ...@@ -191,31 +180,7 @@ ENTRY(inthandler)
jbsr do_IRQ /* call high level irq handler */ jbsr do_IRQ /* call high level irq handler */
lea %sp@(8),%sp /* pop args off stack */ lea %sp@(8),%sp /* pop args off stack */
bra ret_from_interrupt /* this was fallthrough */ bra ret_from_exception
/*
* This is the fast interrupt handler (for certain hardware interrupt
* sources). Unlike the normal interrupt handler it just uses the
* current stack (doesn't care if it is user or kernel). It also
* doesn't bother doing the bottom half handlers.
*/
ENTRY(fasthandler)
SAVE_LOCAL
movew %sp@(PT_OFF_FORMATVEC),%d0
andl #0x03fc,%d0 /* mask out vector only */
movel %sp,%sp@- /* push regs arg */
lsrl #2,%d0 /* calculate real vector # */
movel %d0,%sp@- /* push vector number */
jbsr do_IRQ /* call high level irq handler */
lea %sp@(8),%sp /* pop args off stack */
RESTORE_LOCAL
ENTRY(ret_from_interrupt)
/* the fasthandler is confusing me, haven't seen any user */
jmp ret_from_exception
/* /*
* Beware - when entering resume, prev (the current task) is * Beware - when entering resume, prev (the current task) is
...@@ -226,9 +191,8 @@ ENTRY(ret_from_interrupt) ...@@ -226,9 +191,8 @@ ENTRY(ret_from_interrupt)
*/ */
ENTRY(resume) ENTRY(resume)
movel %a0, %d1 /* get prev thread in d1 */ movel %a0, %d1 /* get prev thread in d1 */
RDUSP
movel sw_usp,%d0 /* save usp */ movel %a2,%a0@(TASK_THREAD+THREAD_USP)
movel %d0,%a0@(TASK_THREAD+THREAD_USP)
SAVE_SWITCH_STACK SAVE_SWITCH_STACK
movel %sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack pointer */ movel %sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack pointer */
...@@ -236,5 +200,5 @@ ENTRY(resume) ...@@ -236,5 +200,5 @@ ENTRY(resume)
RESTORE_SWITCH_STACK RESTORE_SWITCH_STACK
movel %a1@(TASK_THREAD+THREAD_USP),%a0 /* restore thread user stack */ movel %a1@(TASK_THREAD+THREAD_USP),%a0 /* restore thread user stack */
movel %a0, sw_usp WRUSP
rts rts
arch/m68knommu/platform/coldfire/head.S
View file @ 6a7f6ec9
...@@ -3,7 +3,7 @@ ...@@ -3,7 +3,7 @@
/* /*
* head.S -- common startup code for ColdFire CPUs. * head.S -- common startup code for ColdFire CPUs.
* *
* (C) Copyright 1999-2006, Greg Ungerer <gerg@snapgear.com>. * (C) Copyright 1999-2010, Greg Ungerer <gerg@snapgear.com>.
*/ */
/*****************************************************************************/ /*****************************************************************************/
...@@ -13,7 +13,6 @@ ...@@ -13,7 +13,6 @@
#include <linux/init.h> #include <linux/init.h>
#include <asm/asm-offsets.h> #include <asm/asm-offsets.h>
#include <asm/coldfire.h> #include <asm/coldfire.h>
#include <asm/mcfcache.h>
#include <asm/mcfsim.h> #include <asm/mcfsim.h>
#include <asm/thread_info.h> #include <asm/thread_info.h>
...@@ -173,10 +172,27 @@ _start: ...@@ -173,10 +172,27 @@ _start:
/* /*
* Now that we know what the memory is, lets enable cache * Now that we know what the memory is, lets enable cache
* and get things moving. This is Coldfire CPU specific. * and get things moving. This is Coldfire CPU specific. Not
* all version cores have identical cache register setup. But
* it is very similar. Define the exact settings in the headers
* then the code here is the same for all.
*/ */
CACHE_ENABLE /* enable CPU cache */ movel #CACHE_INIT,%d0 /* invalidate whole cache */
movec %d0,%CACR
nop
movel #ACR0_MODE,%d0 /* set RAM region for caching */
movec %d0,%ACR0
movel #ACR1_MODE,%d0 /* anything else to cache? */
movec %d0,%ACR1
#ifdef ACR2_MODE
movel #ACR2_MODE,%d0
movec %d0,%ACR2
movel #ACR3_MODE,%d0
movec %d0,%ACR3
#endif
movel #CACHE_MODE,%d0 /* enable cache */
movec %d0,%CACR
nop
#ifdef CONFIG_ROMFS_FS #ifdef CONFIG_ROMFS_FS
/* /*
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7