drm/i915: use a substruct in vbt data for edp

Housekeeping, similar to psr, backlight, and dsi. No functional changes.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458834623-8734-2-git-send-email-jani.nikula@intel.com

drivers/gpu/drm/i915/i915_drv.h

@@ -1446,15 +1446,16 @@ struct intel_vbt_data {
 
 	enum drrs_support_type drrs_type;
 
-	/* eDP */
-	int edp_rate;
-	int edp_lanes;
-	int edp_preemphasis;
-	int edp_vswing;
-	bool edp_initialized;
-	bool edp_support;
-	int edp_bpp;
-	struct edp_power_seq edp_pps;
+	struct {
+		int rate;
+		int lanes;
+		int preemphasis;
+		int vswing;
+		bool initialized;
+		bool support;
+		int bpp;
+		struct edp_power_seq pps;
+	} edp;
 
 	struct {
 		bool full_link;

drivers/gpu/drm/i915/intel_bios.c

@@ -527,7 +527,7 @@ parse_driver_features(struct drm_i915_private *dev_priv,
 		return;
 
 	if (driver->lvds_config == BDB_DRIVER_FEATURE_EDP)
-		dev_priv->vbt.edp_support = 1;
+		dev_priv->vbt.edp.support = 1;
 
 	if (driver->dual_frequency)
 		dev_priv->render_reclock_avail = true;
@@ -552,20 +552,20 @@ parse_edp(struct drm_i915_private *dev_priv, const struct bdb_header *bdb)
 
 	edp = find_section(bdb, BDB_EDP);
 	if (!edp) {
-		if (dev_priv->vbt.edp_support)
+		if (dev_priv->vbt.edp.support)
 			DRM_DEBUG_KMS("No eDP BDB found but eDP panel supported.\n");
 		return;
 	}
 
 	switch ((edp->color_depth >> (panel_type * 2)) & 3) {
 	case EDP_18BPP:
-		dev_priv->vbt.edp_bpp = 18;
+		dev_priv->vbt.edp.bpp = 18;
 		break;
 	case EDP_24BPP:
-		dev_priv->vbt.edp_bpp = 24;
+		dev_priv->vbt.edp.bpp = 24;
 		break;
 	case EDP_30BPP:
-		dev_priv->vbt.edp_bpp = 30;
+		dev_priv->vbt.edp.bpp = 30;
 		break;
 	}
 
@@ -573,14 +573,14 @@ parse_edp(struct drm_i915_private *dev_priv, const struct bdb_header *bdb)
 	edp_pps = &edp->power_seqs[panel_type];
 	edp_link_params = &edp->link_params[panel_type];
 
-	dev_priv->vbt.edp_pps = *edp_pps;
+	dev_priv->vbt.edp.pps = *edp_pps;
 
 	switch (edp_link_params->rate) {
 	case EDP_RATE_1_62:
-		dev_priv->vbt.edp_rate = DP_LINK_BW_1_62;
+		dev_priv->vbt.edp.rate = DP_LINK_BW_1_62;
 		break;
 	case EDP_RATE_2_7:
-		dev_priv->vbt.edp_rate = DP_LINK_BW_2_7;
+		dev_priv->vbt.edp.rate = DP_LINK_BW_2_7;
 		break;
 	default:
 		DRM_DEBUG_KMS("VBT has unknown eDP link rate value %u\n",
@@ -590,13 +590,13 @@ parse_edp(struct drm_i915_private *dev_priv, const struct bdb_header *bdb)
 
 	switch (edp_link_params->lanes) {
 	case EDP_LANE_1:
-		dev_priv->vbt.edp_lanes = 1;
+		dev_priv->vbt.edp.lanes = 1;
 		break;
 	case EDP_LANE_2:
-		dev_priv->vbt.edp_lanes = 2;
+		dev_priv->vbt.edp.lanes = 2;
 		break;
 	case EDP_LANE_4:
-		dev_priv->vbt.edp_lanes = 4;
+		dev_priv->vbt.edp.lanes = 4;
 		break;
 	default:
 		DRM_DEBUG_KMS("VBT has unknown eDP lane count value %u\n",
@@ -606,16 +606,16 @@ parse_edp(struct drm_i915_private *dev_priv, const struct bdb_header *bdb)
 
 	switch (edp_link_params->preemphasis) {
 	case EDP_PREEMPHASIS_NONE:
-		dev_priv->vbt.edp_preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_0;
+		dev_priv->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_0;
 		break;
 	case EDP_PREEMPHASIS_3_5dB:
-		dev_priv->vbt.edp_preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_1;
+		dev_priv->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_1;
 		break;
 	case EDP_PREEMPHASIS_6dB:
-		dev_priv->vbt.edp_preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_2;
+		dev_priv->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_2;
 		break;
 	case EDP_PREEMPHASIS_9_5dB:
-		dev_priv->vbt.edp_preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_3;
+		dev_priv->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_3;
 		break;
 	default:
 		DRM_DEBUG_KMS("VBT has unknown eDP pre-emphasis value %u\n",
@@ -625,16 +625,16 @@ parse_edp(struct drm_i915_private *dev_priv, const struct bdb_header *bdb)
 
 	switch (edp_link_params->vswing) {
 	case EDP_VSWING_0_4V:
-		dev_priv->vbt.edp_vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_0;
+		dev_priv->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_0;
 		break;
 	case EDP_VSWING_0_6V:
-		dev_priv->vbt.edp_vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_1;
+		dev_priv->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_1;
 		break;
 	case EDP_VSWING_0_8V:
-		dev_priv->vbt.edp_vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_2;
+		dev_priv->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_2;
 		break;
 	case EDP_VSWING_1_2V:
-		dev_priv->vbt.edp_vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_3;
+		dev_priv->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_3;
 		break;
 	default:
 		DRM_DEBUG_KMS("VBT has unknown eDP voltage swing value %u\n",

drivers/gpu/drm/i915/intel_ddi.c

@@ -2002,8 +2002,8 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
 	pipe_config->has_audio =
 		intel_ddi_is_audio_enabled(dev_priv, intel_crtc);
 
-	if (encoder->type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp_bpp &&
-	    pipe_config->pipe_bpp > dev_priv->vbt.edp_bpp) {
+	if (encoder->type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.bpp &&
+	    pipe_config->pipe_bpp > dev_priv->vbt.edp.bpp) {
 		/*
 		 * This is a big fat ugly hack.
 		 *
@@ -2018,8 +2018,8 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
 		 * load.
 		 */
 		DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n",
-			      pipe_config->pipe_bpp, dev_priv->vbt.edp_bpp);
-		dev_priv->vbt.edp_bpp = pipe_config->pipe_bpp;
+			      pipe_config->pipe_bpp, dev_priv->vbt.edp.bpp);
+		dev_priv->vbt.edp.bpp = pipe_config->pipe_bpp;
 	}
 
 	intel_ddi_clock_get(encoder, pipe_config);

drivers/gpu/drm/i915/intel_dp.c

@@ -1500,10 +1500,10 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 
 		/* Get bpp from vbt only for panels that dont have bpp in edid */
 		if (intel_connector->base.display_info.bpc == 0 &&
-			(dev_priv->vbt.edp_bpp && dev_priv->vbt.edp_bpp < bpp)) {
+			(dev_priv->vbt.edp.bpp && dev_priv->vbt.edp.bpp < bpp)) {
 			DRM_DEBUG_KMS("clamping bpp for eDP panel to BIOS-provided %i\n",
-				      dev_priv->vbt.edp_bpp);
-			bpp = dev_priv->vbt.edp_bpp;
+				      dev_priv->vbt.edp.bpp);
+			bpp = dev_priv->vbt.edp.bpp;
 		}
 
 		/*
@@ -2386,8 +2386,8 @@ static void intel_dp_get_config(struct intel_encoder *encoder,
 		intel_dotclock_calculate(pipe_config->port_clock,
 					 &pipe_config->dp_m_n);
 
-	if (is_edp(intel_dp) && dev_priv->vbt.edp_bpp &&
-	    pipe_config->pipe_bpp > dev_priv->vbt.edp_bpp) {
+	if (is_edp(intel_dp) && dev_priv->vbt.edp.bpp &&
+	    pipe_config->pipe_bpp > dev_priv->vbt.edp.bpp) {
 		/*
 		 * This is a big fat ugly hack.
 		 *
@@ -2402,8 +2402,8 @@ static void intel_dp_get_config(struct intel_encoder *encoder,
 		 * load.
 		 */
 		DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n",
-			      pipe_config->pipe_bpp, dev_priv->vbt.edp_bpp);
-		dev_priv->vbt.edp_bpp = pipe_config->pipe_bpp;
+			      pipe_config->pipe_bpp, dev_priv->vbt.edp.bpp);
+		dev_priv->vbt.edp.bpp = pipe_config->pipe_bpp;
 	}
 }
 
@@ -5111,7 +5111,7 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev,
 	DRM_DEBUG_KMS("cur t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n",
 		      cur.t1_t3, cur.t8, cur.t9, cur.t10, cur.t11_t12);
 
-	vbt = dev_priv->vbt.edp_pps;
+	vbt = dev_priv->vbt.edp.pps;
 
 	/* Upper limits from eDP 1.3 spec. Note that we use the clunky units of
 	 * our hw here, which are all in 100usec. */

drivers/gpu/drm/i915/intel_lvds.c

@@ -924,7 +924,7 @@ void intel_lvds_init(struct drm_device *dev)
 	if (HAS_PCH_SPLIT(dev)) {
 		if ((lvds & LVDS_DETECTED) == 0)
 			return;
-		if (dev_priv->vbt.edp_support) {
+		if (dev_priv->vbt.edp.support) {
 			DRM_DEBUG_KMS("disable LVDS for eDP support\n");
 			return;
 		}