Commit 6ac189fc authored by Rahul Sharma's avatar Rahul Sharma Committed by Kukjin Kim

ARM: dts: enable hdmi for exynos5420-peach-pit board

Enable hdmi for exynos5420 based peach-pit board.
Signed-off-by: default avatarRahul Sharma <rahul.sharma@samsung.com>
Acked-by: default avatarTomasz Figa <t.figa@samsung.com>
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
parent 2963c554
...@@ -74,6 +74,13 @@ power_key_irq: power-key-irq { ...@@ -74,6 +74,13 @@ power_key_irq: power-key-irq {
samsung,pin-pud = <0>; samsung,pin-pud = <0>;
samsung,pin-drv = <0>; samsung,pin-drv = <0>;
}; };
hdmi_hpd_irq: hdmi-hpd-irq {
samsung,pins = "gpx3-7";
samsung,pin-function = <0>;
samsung,pin-pud = <1>;
samsung,pin-drv = <0>;
};
}; };
&rtc { &rtc {
...@@ -137,6 +144,21 @@ tpm@20 { ...@@ -137,6 +144,21 @@ tpm@20 {
}; };
}; };
&i2c_2 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
samsung,i2c-slave-addr = <0x50>;
};
&hdmi {
status = "okay";
hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd_irq>;
ddc = <&i2c_2>;
};
/* /*
* Use longest HW watchdog in SoC (32 seconds) since the hardware * Use longest HW watchdog in SoC (32 seconds) since the hardware
* watchdog provides no debugging information (compared to soft/hard * watchdog provides no debugging information (compared to soft/hard
......
...@@ -659,9 +659,14 @@ hdmi: hdmi@14530000 { ...@@ -659,9 +659,14 @@ hdmi: hdmi@14530000 {
<&clock CLK_MOUT_HDMI>; <&clock CLK_MOUT_HDMI>;
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
"sclk_hdmiphy", "mout_hdmi"; "sclk_hdmiphy", "mout_hdmi";
phy = <&hdmiphy>;
status = "disabled"; status = "disabled";
}; };
hdmiphy: hdmiphy@145D0000 {
reg = <0x145D0000 0x20>;
};
mixer: mixer@14450000 { mixer: mixer@14450000 {
compatible = "samsung,exynos5420-mixer"; compatible = "samsung,exynos5420-mixer";
reg = <0x14450000 0x10000>; reg = <0x14450000 0x10000>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment