Commit 6acda8fb authored by David S. Miller's avatar David S. Miller

Merge branch 'mv88e6060-cleanups'

Andrew Lunn says:

====================
mv88e6060 cleanups

This patchset performs some cleanups of the mv88e6060 DSA driver, as a
step towards making it an MDIO device, rather than use the old probing
method. The changes here are all pretty mechanical and only compile
tested.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents e56e2515 1ba22bf5
// SPDX-License-Identifier: GPL-2.0+
/*
* net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips
* Copyright (c) 2008-2009 Marvell Semiconductor
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/delay.h>
......@@ -18,40 +14,16 @@
#include <net/dsa.h>
#include "mv88e6060.h"
static int reg_read(struct dsa_switch *ds, int addr, int reg)
static int reg_read(struct mv88e6060_priv *priv, int addr, int reg)
{
struct mv88e6060_priv *priv = ds->priv;
return mdiobus_read_nested(priv->bus, priv->sw_addr + addr, reg);
}
#define REG_READ(addr, reg) \
({ \
int __ret; \
\
__ret = reg_read(ds, addr, reg); \
if (__ret < 0) \
return __ret; \
__ret; \
})
static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
static int reg_write(struct mv88e6060_priv *priv, int addr, int reg, u16 val)
{
struct mv88e6060_priv *priv = ds->priv;
return mdiobus_write_nested(priv->bus, priv->sw_addr + addr, reg, val);
}
#define REG_WRITE(addr, reg, val) \
({ \
int __ret; \
\
__ret = reg_write(ds, addr, reg, val); \
if (__ret < 0) \
return __ret; \
})
static const char *mv88e6060_get_name(struct mii_bus *bus, int sw_addr)
{
int ret;
......@@ -97,7 +69,7 @@ static const char *mv88e6060_drv_probe(struct device *dsa_dev,
return name;
}
static int mv88e6060_switch_reset(struct dsa_switch *ds)
static int mv88e6060_switch_reset(struct mv88e6060_priv *priv)
{
int i;
int ret;
......@@ -105,23 +77,32 @@ static int mv88e6060_switch_reset(struct dsa_switch *ds)
/* Set all ports to the disabled state. */
for (i = 0; i < MV88E6060_PORTS; i++) {
ret = REG_READ(REG_PORT(i), PORT_CONTROL);
REG_WRITE(REG_PORT(i), PORT_CONTROL,
ret = reg_read(priv, REG_PORT(i), PORT_CONTROL);
if (ret < 0)
return ret;
ret = reg_write(priv, REG_PORT(i), PORT_CONTROL,
ret & ~PORT_CONTROL_STATE_MASK);
if (ret)
return ret;
}
/* Wait for transmit queues to drain. */
usleep_range(2000, 4000);
/* Reset the switch. */
REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL,
ret = reg_write(priv, REG_GLOBAL, GLOBAL_ATU_CONTROL,
GLOBAL_ATU_CONTROL_SWRESET |
GLOBAL_ATU_CONTROL_LEARNDIS);
if (ret)
return ret;
/* Wait up to one second for reset to complete. */
timeout = jiffies + 1 * HZ;
while (time_before(jiffies, timeout)) {
ret = REG_READ(REG_GLOBAL, GLOBAL_STATUS);
ret = reg_read(priv, REG_GLOBAL, GLOBAL_STATUS);
if (ret < 0)
return ret;
if (ret & GLOBAL_STATUS_INIT_READY)
break;
......@@ -133,61 +114,69 @@ static int mv88e6060_switch_reset(struct dsa_switch *ds)
return 0;
}
static int mv88e6060_setup_global(struct dsa_switch *ds)
static int mv88e6060_setup_global(struct mv88e6060_priv *priv)
{
int ret;
/* Disable discarding of frames with excessive collisions,
* set the maximum frame size to 1536 bytes, and mask all
* interrupt sources.
*/
REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, GLOBAL_CONTROL_MAX_FRAME_1536);
ret = reg_write(priv, REG_GLOBAL, GLOBAL_CONTROL,
GLOBAL_CONTROL_MAX_FRAME_1536);
if (ret)
return ret;
/* Disable automatic address learning.
*/
REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL,
return reg_write(priv, REG_GLOBAL, GLOBAL_ATU_CONTROL,
GLOBAL_ATU_CONTROL_LEARNDIS);
return 0;
}
static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
static int mv88e6060_setup_port(struct mv88e6060_priv *priv, int p)
{
int addr = REG_PORT(p);
int ret;
/* Do not force flow control, disable Ingress and Egress
* Header tagging, disable VLAN tunneling, and set the port
* state to Forwarding. Additionally, if this is the CPU
* port, enable Ingress and Egress Trailer tagging mode.
*/
REG_WRITE(addr, PORT_CONTROL,
dsa_is_cpu_port(ds, p) ?
ret = reg_write(priv, addr, PORT_CONTROL,
dsa_is_cpu_port(priv->ds, p) ?
PORT_CONTROL_TRAILER |
PORT_CONTROL_INGRESS_MODE |
PORT_CONTROL_STATE_FORWARDING :
PORT_CONTROL_STATE_FORWARDING);
if (ret)
return ret;
/* Port based VLAN map: give each port its own address
* database, allow the CPU port to talk to each of the 'real'
* ports, and allow each of the 'real' ports to only talk to
* the CPU port.
*/
REG_WRITE(addr, PORT_VLAN_MAP,
ret = reg_write(priv, addr, PORT_VLAN_MAP,
((p & 0xf) << PORT_VLAN_MAP_DBNUM_SHIFT) |
(dsa_is_cpu_port(ds, p) ? dsa_user_ports(ds) :
BIT(dsa_to_port(ds, p)->cpu_dp->index)));
(dsa_is_cpu_port(priv->ds, p) ?
dsa_user_ports(priv->ds) :
BIT(dsa_to_port(priv->ds, p)->cpu_dp->index)));
if (ret)
return ret;
/* Port Association Vector: when learning source addresses
* of packets, add the address to the address database using
* a port bitmap that has only the bit for this port set and
* the other bits clear.
*/
REG_WRITE(addr, PORT_ASSOC_VECTOR, BIT(p));
return 0;
return reg_write(priv, addr, PORT_ASSOC_VECTOR, BIT(p));
}
static int mv88e6060_setup_addr(struct dsa_switch *ds)
static int mv88e6060_setup_addr(struct mv88e6060_priv *priv)
{
u8 addr[ETH_ALEN];
int ret;
u16 val;
eth_random_addr(addr);
......@@ -199,34 +188,43 @@ static int mv88e6060_setup_addr(struct dsa_switch *ds)
*/
val &= 0xfeff;
REG_WRITE(REG_GLOBAL, GLOBAL_MAC_01, val);
REG_WRITE(REG_GLOBAL, GLOBAL_MAC_23, (addr[2] << 8) | addr[3]);
REG_WRITE(REG_GLOBAL, GLOBAL_MAC_45, (addr[4] << 8) | addr[5]);
ret = reg_write(priv, REG_GLOBAL, GLOBAL_MAC_01, val);
if (ret)
return ret;
return 0;
ret = reg_write(priv, REG_GLOBAL, GLOBAL_MAC_23,
(addr[2] << 8) | addr[3]);
if (ret)
return ret;
return reg_write(priv, REG_GLOBAL, GLOBAL_MAC_45,
(addr[4] << 8) | addr[5]);
}
static int mv88e6060_setup(struct dsa_switch *ds)
{
struct mv88e6060_priv *priv = ds->priv;
int ret;
int i;
ret = mv88e6060_switch_reset(ds);
priv->ds = ds;
ret = mv88e6060_switch_reset(priv);
if (ret < 0)
return ret;
/* @@@ initialise atu */
ret = mv88e6060_setup_global(ds);
ret = mv88e6060_setup_global(priv);
if (ret < 0)
return ret;
ret = mv88e6060_setup_addr(ds);
ret = mv88e6060_setup_addr(priv);
if (ret < 0)
return ret;
for (i = 0; i < MV88E6060_PORTS; i++) {
ret = mv88e6060_setup_port(ds, i);
ret = mv88e6060_setup_port(priv, i);
if (ret < 0)
return ret;
}
......@@ -243,25 +241,27 @@ static int mv88e6060_port_to_phy_addr(int port)
static int mv88e6060_phy_read(struct dsa_switch *ds, int port, int regnum)
{
struct mv88e6060_priv *priv = ds->priv;
int addr;
addr = mv88e6060_port_to_phy_addr(port);
if (addr == -1)
return 0xffff;
return reg_read(ds, addr, regnum);
return reg_read(priv, addr, regnum);
}
static int
mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
{
struct mv88e6060_priv *priv = ds->priv;
int addr;
addr = mv88e6060_port_to_phy_addr(port);
if (addr == -1)
return 0xffff;
return reg_write(ds, addr, regnum, val);
return reg_write(priv, addr, regnum, val);
}
static const struct dsa_switch_ops mv88e6060_switch_ops = {
......
......@@ -117,6 +117,7 @@ struct mv88e6060_priv {
*/
struct mii_bus *bus;
int sw_addr;
struct dsa_switch *ds;
};
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment