Merge tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC multiplatform code updates from Arnd Bergmann:
 "This branch is the culmination of 5 years of effort to bring the ARMv6
  and ARMv7 platforms together such that they can all be enabled and
  boot the same kernel.  It has been a tremendous amount of cleanup and
  refactoring by a huge number of people, and creation of several new
  (and major) subsystems to better abstract out all the platform details
  in an appropriate manner.

  The bulk of this branch is a large patchset from Arnd that brings
  several of the more minor and older platforms we have closer to
  multiplatform support.  Among these are MMP, S3C64xx, Orion5x, mv78xx0
  and realview Much of this is moving around header files from old mach
  directories, but there are also some cleanup patches of debug_ll
  (lowlevel debug per-platform options) and other parts.

  Linus Walleij also has some patchs to clean up the older ARM Realview
  platforms by finally introducing DT support, and Rob Herring has some
  for ARM Versatile which is now DT-only.  Both of these platforms are
  now multiplatform.

  Finally, a couple of patches from Russell for Dove PMU, and a fix from
  Valentin Rothberg for Exynos ADC, which were rebased on top of the
  series to avoid conflicts"

* tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits)
  ARM: realview: don't select SMP_ON_UP for UP builds
  ARM: s3c: simplify s3c_irqwake_{e,}intallow definition
  ARM: s3c64xx: fix pm-debug compilation
  iio: exynos-adc: fix irqf_oneshot.cocci warnings
  ARM: realview: build realview-dt SMP support only when used
  ARM: realview: select apropriate targets
  ARM: realview: clean up header files
  ARM: realview: make all header files local
  ARM: no longer make CPU targets visible separately
  ARM: integrator: use explicit core module options
  ARM: realview: enable multiplatform
  ARM: make default platform work for NOMMU
  ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location
  ARM: defconfig: use correct debug_ll settings
  ARM: versatile: convert to multi-platform
  ARM: versatile: merge mach code into a single file
  ARM: versatile: switch to DT only booting and remove legacy code
  ARM: versatile: add DT based PCI detection
  ARM: pxa: mark ezx structures as __maybe_unused
  ARM: pxa: mark raumfeld init functions as __maybe_unused
  ...

Documentation/arm/pxa/mfp.txt

@@ -49,7 +49,7 @@ to this new MFP mechanism, here are several key points:
      internal controllers like PWM, SSP and UART, with 128 internal signals
      which can be routed to external through one or more MFPs (e.g. GPIO<0>
      can be routed through either MFP_PIN_GPIO0 as well as MFP_PIN_GPIO0_2,
-     see arch/arm/mach-pxa/mach/include/mfp-pxa300.h)
+     see arch/arm/mach-pxa/mfp-pxa300.h)
 
   2. Alternate function configuration is removed from this GPIO controller,
      the remaining functions are pure GPIO-specific, i.e.
@@ -76,11 +76,11 @@ For board code writers, here are some guidelines:
 
 1. include ONE of the following header files in your <board>.c:
 
-   - #include <mach/mfp-pxa25x.h>
-   - #include <mach/mfp-pxa27x.h>
-   - #include <mach/mfp-pxa300.h>
-   - #include <mach/mfp-pxa320.h>
-   - #include <mach/mfp-pxa930.h>
+   - #include "mfp-pxa25x.h"
+   - #include "mfp-pxa27x.h"
+   - #include "mfp-pxa300.h"
+   - #include "mfp-pxa320.h"
+   - #include "mfp-pxa930.h"
 
    NOTE: only one file in your <board>.c, depending on the processors used,
    because pin configuration definitions may conflict in these file (i.e.
@@ -203,20 +203,20 @@ make them effective there-after.
     1. Unified pin definitions - enum constants for all configurable pins
     2. processor-neutral bit definitions for a possible MFP configuration
 
-  - arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
+  - arch/arm/mach-pxa/mfp-pxa3xx.h
 
   for PXA3xx specific MFPR register bit definitions and PXA3xx common pin
   configurations
 
-  - arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
+  - arch/arm/mach-pxa/mfp-pxa2xx.h
 
   for PXA2xx specific definitions and PXA25x/PXA27x common pin configurations
 
-  - arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
-    arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
-    arch/arm/mach-pxa/include/mach/mfp-pxa300.h
-    arch/arm/mach-pxa/include/mach/mfp-pxa320.h
-    arch/arm/mach-pxa/include/mach/mfp-pxa930.h
+  - arch/arm/mach-pxa/mfp-pxa25x.h
+    arch/arm/mach-pxa/mfp-pxa27x.h
+    arch/arm/mach-pxa/mfp-pxa300.h
+    arch/arm/mach-pxa/mfp-pxa320.h
+    arch/arm/mach-pxa/mfp-pxa930.h
 
   for processor specific definitions
 

Documentation/devicetree/bindings/arm/cpus.txt

@@ -191,6 +191,7 @@ nodes to be present and contain the properties described below.
 			    "allwinner,sun6i-a31"
 			    "allwinner,sun8i-a23"
 			    "arm,psci"
+			    "arm,realview-smp"
 			    "brcm,brahma-b15"
 			    "marvell,armada-375-smp"
 			    "marvell,armada-380-smp"

Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt

@@ -47,6 +47,9 @@ Required properties:
 
 - samsung,syscon-phandle Contains the PMU system controller node
 			(To access the ADC_PHY register on Exynos5250/5420/5800/3250)
+Optional properties:
+- has-touchscreen:	If present, indicates that a touchscreen is
+			connected an usable.
 
 Note: child nodes can be added for auto probing from device tree.
 

arch/arm/Kconfig

@@ -240,7 +240,6 @@ config ARM_PATCH_PHYS_VIRT
 	bool "Patch physical to virtual translations at runtime" if EMBEDDED
 	default y
 	depends on !XIP_KERNEL && MMU
-	depends on !ARCH_REALVIEW || !SPARSEMEM
 	help
 	  Patch phys-to-virt and virt-to-phys translation functions at
 	  boot and module load time according to the position of the
@@ -321,7 +320,7 @@ config ARCH_MMAP_RND_BITS_MAX
 #
 choice
 	prompt "ARM system type"
-	default ARCH_VERSATILE if !MMU
+	default ARM_SINGLE_ARMV7M if !MMU
 	default ARCH_MULTIPLATFORM if MMU
 
 config ARCH_MULTIPLATFORM
@@ -353,38 +352,6 @@ config ARM_SINGLE_ARMV7M
 	select SPARSE_IRQ
 	select USE_OF
 
-config ARCH_REALVIEW
-	bool "ARM Ltd. RealView family"
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_AMBA
-	select ARM_TIMER_SP804
-	select COMMON_CLK
-	select COMMON_CLK_VERSATILE
-	select GENERIC_CLOCKEVENTS
-	select GPIO_PL061 if GPIOLIB
-	select ICST
-	select NEED_MACH_MEMORY_H
-	select PLAT_VERSATILE
-	select PLAT_VERSATILE_SCHED_CLOCK
-	help
-	  This enables support for ARM Ltd RealView boards.
-
-config ARCH_VERSATILE
-	bool "ARM Ltd. Versatile family"
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_AMBA
-	select ARM_TIMER_SP804
-	select ARM_VIC
-	select CLKDEV_LOOKUP
-	select GENERIC_CLOCKEVENTS
-	select HAVE_MACH_CLKDEV
-	select ICST
-	select PLAT_VERSATILE
-	select PLAT_VERSATILE_CLOCK
-	select PLAT_VERSATILE_SCHED_CLOCK
-	select VERSATILE_FPGA_IRQ
-	help
-	  This enables support for ARM Ltd Versatile board.
 
 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
@@ -519,55 +486,15 @@ config ARCH_DOVE
 	select CPU_PJ4
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI
+	select MULTI_IRQ_HANDLER
 	select MVEBU_MBUS
 	select PINCTRL
 	select PINCTRL_DOVE
 	select PLAT_ORION_LEGACY
-	help
-	  Support for the Marvell Dove SoC 88AP510
-
-config ARCH_MV78XX0
-	bool "Marvell MV78xx0"
-	select ARCH_REQUIRE_GPIOLIB
-	select CPU_FEROCEON
-	select GENERIC_CLOCKEVENTS
-	select MVEBU_MBUS
-	select PCI
-	select PLAT_ORION_LEGACY
-	help
-	  Support for the following Marvell MV78xx0 series SoCs:
-	  MV781x0, MV782x0.
-
-config ARCH_ORION5X
-	bool "Marvell Orion"
-	depends on MMU
-	select ARCH_REQUIRE_GPIOLIB
-	select CPU_FEROCEON
-	select GENERIC_CLOCKEVENTS
-	select MVEBU_MBUS
-	select PCI
-	select PLAT_ORION_LEGACY
-	select MULTI_IRQ_HANDLER
-	help
-	  Support for the following Marvell Orion 5x series SoCs:
-	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
-	  Orion-2 (5281), Orion-1-90 (6183).
-
-config ARCH_MMP
-	bool "Marvell PXA168/910/MMP2"
-	depends on MMU
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select GENERIC_ALLOCATOR
-	select GENERIC_CLOCKEVENTS
-	select GPIO_PXA
-	select IRQ_DOMAIN
-	select MULTI_IRQ_HANDLER
-	select PINCTRL
-	select PLAT_PXA
 	select SPARSE_IRQ
+	select PM_GENERIC_DOMAINS if PM
 	help
-	  Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
+	  Support for the Marvell Dove SoC 88AP510
 
 config ARCH_KS8695
 	bool "Micrel/Kendin KS8695"
@@ -692,32 +619,6 @@ config ARCH_S3C24XX
 	  (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
 	  Samsung SMDK2410 development board (and derivatives).
 
-config ARCH_S3C64XX
-	bool "Samsung S3C64XX"
-	select ARCH_REQUIRE_GPIOLIB
-	select ARM_AMBA
-	select ARM_VIC
-	select ATAGS
-	select CLKDEV_LOOKUP
-	select CLKSRC_SAMSUNG_PWM
-	select COMMON_CLK_SAMSUNG
-	select CPU_V6K
-	select GENERIC_CLOCKEVENTS
-	select GPIO_SAMSUNG
-	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-	select HAVE_TCM
-	select NO_IOPORT_MAP
-	select PLAT_SAMSUNG
-	select PM_GENERIC_DOMAINS if PM
-	select S3C_DEV_NAND
-	select S3C_GPIO_TRACK
-	select SAMSUNG_ATAGS
-	select SAMSUNG_WAKEMASK
-	select SAMSUNG_WDT_RESET
-	help
-	  Samsung S3C64XX series based systems
-
 config ARCH_DAVINCI
 	bool "TI DaVinci"
 	select ARCH_HAS_HOLES_MEMORYMODEL

arch/arm/configs/ep93xx_defconfig

@@ -132,6 +132,5 @@ CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_PL01X=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_LIBCRC32C=y

arch/arm/configs/lpc32xx_defconfig

@@ -204,7 +204,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FTRACE is not set
 # CONFIG_ARM_UNWIND is not set
 CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_8250=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CRYPTO_ANSI_CPRNG=y
 # CONFIG_CRYPTO_HW is not set

arch/arm/configs/multi_v7_defconfig

@@ -11,6 +11,9 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_CMDLINE_PARTITION=y
+CONFIG_ARCH_MULTI_V7=y
+# CONFIG_ARCH_MULTI_V5 is not set
+# CONFIG_ARCH_MULTI_V4 is not set
 CONFIG_ARCH_VIRT=y
 CONFIG_ARCH_ALPINE=y
 CONFIG_ARCH_MVEBU=y

arch/arm/configs/mv78xx0_defconfig

@@ -11,6 +11,9 @@ CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MULTI_V5=y
+# CONFIG_ARCH_MULTI_V6 is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MV78XX0=y
 CONFIG_MACH_DB78X00_BP=y
 CONFIG_MACH_RD78X00_MASA=y
@@ -132,7 +135,6 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_8250=y
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m

arch/arm/configs/orion5x_defconfig

@@ -13,6 +13,9 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_BSD_DISKLABEL=y
+CONFIG_ARCH_MULTI_V5=y
+# CONFIG_ARCH_MULTI_V6 is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_ORION5X=y
 CONFIG_ARCH_ORION5X_DT=y
 CONFIG_MACH_DB88F5281=y
@@ -159,7 +162,6 @@ CONFIG_LATENCYTOP=y
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_8250=y
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m

arch/arm/configs/realview-smp_defconfig

@@ -8,10 +8,19 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_REALVIEW=y
+CONFIG_REALVIEW_DT=y
 CONFIG_MACH_REALVIEW_EB=y
+CONFIG_REALVIEW_EB_ARM1136=y
+CONFIG_REALVIEW_EB_ARM1176=y
+CONFIG_REALVIEW_EB_A9MP=y
 CONFIG_REALVIEW_EB_ARM11MP=y
+CONFIG_REALVIEW_EB_ARM11MP_REVB=y
 CONFIG_MACH_REALVIEW_PB11MP=y
+CONFIG_MACH_REALVIEW_PB1176=y
+CONFIG_MACH_REALVIEW_PBA8=y
+CONFIG_MACH_REALVIEW_PBX=y
 CONFIG_SMP=y
 CONFIG_HOTPLUG_CPU=y
 CONFIG_AEABI=y

arch/arm/configs/realview_defconfig

@@ -8,11 +8,19 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_REALVIEW=y
+CONFIG_REALVIEW_DT=y
 CONFIG_MACH_REALVIEW_EB=y
+CONFIG_REALVIEW_EB_ARM1136=y
+CONFIG_REALVIEW_EB_ARM1176=y
+CONFIG_REALVIEW_EB_A9MP=y
 CONFIG_REALVIEW_EB_ARM11MP=y
+CONFIG_REALVIEW_EB_ARM11MP_REVB=y
 CONFIG_MACH_REALVIEW_PB11MP=y
 CONFIG_MACH_REALVIEW_PB1176=y
+CONFIG_MACH_REALVIEW_PBA8=y
+CONFIG_MACH_REALVIEW_PBX=y
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0

arch/arm/configs/s3c6400_defconfig

@@ -5,6 +5,8 @@ CONFIG_KALLSYMS_ALL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MULTI_V6=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_S3C64XX=y
 CONFIG_S3C_BOOT_ERROR_RESET=y
 CONFIG_MACH_SMDK6400=y

arch/arm/configs/versatile_defconfig

@@ -6,8 +6,8 @@ CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_VERSATILE=y
-CONFIG_MACH_VERSATILE_AB=y
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
@@ -82,6 +82,5 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_PL01X=y
 CONFIG_FONTS=y
 CONFIG_FONT_ACORN_8x8=y

arch/arm/include/asm/cputype.h

@@ -228,10 +228,26 @@ static inline int cpu_is_xsc3(void)
 }
 #endif
 
-#if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3)
-#define	cpu_is_xscale()	0
+#if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3) && \
+    !defined(CONFIG_CPU_MOHAWK)
+#define	cpu_is_xscale_family() 0
 #else
-#define	cpu_is_xscale()	1
+static inline int cpu_is_xscale_family(void)
+{
+	unsigned int id;
+	id = read_cpuid_id() & 0xffffe000;
+
+	switch (id) {
+	case 0x69052000: /* Intel XScale 1 */
+	case 0x69054000: /* Intel XScale 2 */
+	case 0x69056000: /* Intel XScale 3 */
+	case 0x56056000: /* Marvell XScale 3 */
+	case 0x56158000: /* Marvell Mohawk */
+		return 1;
+	}
+
+	return 0;
+}
 #endif
 
 /*

arch/arm/kernel/devtree.c

@@ -211,7 +211,7 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
 {
 	const struct machine_desc *mdesc, *mdesc_best = NULL;
 
-#ifdef CONFIG_ARCH_MULTIPLATFORM
+#if defined(CONFIG_ARCH_MULTIPLATFORM) || defined(CONFIG_ARM_SINGLE_ARMV7M)
 	DT_MACHINE_START(GENERIC_DT, "Generic DT based system")
 	MACHINE_END
 

arch/arm/kernel/xscale-cp0.c

@@ -15,6 +15,9 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <asm/thread_notify.h>
+#include <asm/cputype.h>
+
+asm("	.arch armv5te\n");
 
 static inline void dsp_save_state(u32 *state)
 {
@@ -152,6 +155,10 @@ static int __init xscale_cp0_init(void)
 {
 	u32 cp_access;
 
+	/* do not attempt to probe iwmmxt on non-xscale family CPUs */
+	if (!cpu_is_xscale_family())
+		return 0;
+
 	cp_access = xscale_cp_access_read() & ~3;
 	xscale_cp_access_write(cp_access | 1);
 

arch/arm/mach-davinci/board-da830-evm.c

@@ -32,7 +32,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/cp_intc.h>
+#include "cp_intc.h"
 #include <mach/mux.h>
 #include <mach/da8xx.h>
 

arch/arm/mach-davinci/board-da850-evm.c

@@ -40,10 +40,10 @@
 #include <linux/spi/flash.h>
 
 #include <mach/common.h>
-#include <mach/cp_intc.h>
+#include "cp_intc.h"
 #include <mach/da8xx.h>
 #include <mach/mux.h>
-#include <mach/sram.h>
+#include "sram.h"
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-davinci/board-mityomapl138.c

@@ -26,7 +26,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/common.h>
-#include <mach/cp_intc.h>
+#include "cp_intc.h"
 #include <mach/da8xx.h>
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/mtd-davinci-aemif.h>

arch/arm/mach-davinci/board-omapl138-hawk.c

@@ -19,7 +19,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/cp_intc.h>
+#include "cp_intc.h"
 #include <mach/da8xx.h>
 #include <mach/mux.h>
 

arch/arm/mach-davinci/clock.c

@@ -23,7 +23,7 @@
 #include <mach/hardware.h>
 
 #include <mach/clock.h>
-#include <mach/psc.h>
+#include "psc.h"
 #include <mach/cputype.h>
 #include "clock.h"
 

arch/arm/mach-davinci/cp_intc.c

@@ -19,7 +19,7 @@
 #include <linux/of_irq.h>
 
 #include <mach/common.h>
-#include <mach/cp_intc.h>
+#include "cp_intc.h"
 
 static inline unsigned int cp_intc_read(unsigned offset)
 {

arch/arm/mach-davinci/cpuidle.c

@@ -19,8 +19,8 @@
 #include <linux/export.h>
 #include <asm/cpuidle.h>
 
-#include <mach/cpuidle.h>
-#include <mach/ddr2.h>
+#include "cpuidle.h"
+#include "ddr2.h"
 
 #define DAVINCI_CPUIDLE_MAX_STATES	2
 

arch/arm/mach-davinci/da830.c

@@ -15,7 +15,7 @@
 
 #include <asm/mach/map.h>
 
-#include <mach/psc.h>
+#include "psc.h"
 #include <mach/irqs.h>
 #include <mach/cputype.h>
 #include <mach/common.h>

arch/arm/mach-davinci/da850.c

@@ -22,7 +22,7 @@
 
 #include <asm/mach/map.h>
 
-#include <mach/psc.h>
+#include "psc.h"
 #include <mach/irqs.h>
 #include <mach/cputype.h>
 #include <mach/common.h>

arch/arm/mach-davinci/da8xx-dt.c

@@ -15,7 +15,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/cp_intc.h>
+#include "cp_intc.h"
 #include <mach/da8xx.h>
 
 #define DA8XX_NUM_UARTS	3

arch/arm/mach-davinci/devices-da8xx.c

@@ -22,8 +22,8 @@
 #include <mach/common.h>
 #include <mach/time.h>
 #include <mach/da8xx.h>
-#include <mach/cpuidle.h>
-#include <mach/sram.h>
+#include "cpuidle.h"
+#include "sram.h"
 
 #include "clock.h"
 #include "asp.h"

arch/arm/mach-davinci/dm355.c

@@ -21,7 +21,7 @@
 #include <asm/mach/map.h>
 
 #include <mach/cputype.h>
-#include <mach/psc.h>
+#include "psc.h"
 #include <mach/mux.h>
 #include <mach/irqs.h>
 #include <mach/time.h>

arch/arm/mach-davinci/dm365.c

@@ -26,7 +26,7 @@
 #include <asm/mach/map.h>
 
 #include <mach/cputype.h>
-#include <mach/psc.h>
+#include "psc.h"
 #include <mach/mux.h>
 #include <mach/irqs.h>
 #include <mach/time.h>

arch/arm/mach-davinci/dm644x.c

@@ -19,7 +19,7 @@
 
 #include <mach/cputype.h>
 #include <mach/irqs.h>
-#include <mach/psc.h>
+#include "psc.h"
 #include <mach/mux.h>
 #include <mach/time.h>
 #include <mach/serial.h>

arch/arm/mach-davinci/dm646x.c

@@ -20,7 +20,7 @@
 
 #include <mach/cputype.h>
 #include <mach/irqs.h>
-#include <mach/psc.h>
+#include "psc.h"
 #include <mach/mux.h>
 #include <mach/time.h>
 #include <mach/serial.h>

arch/arm/mach-davinci/pm.c

@@ -21,7 +21,7 @@
 
 #include <mach/common.h>
 #include <mach/da8xx.h>
-#include <mach/sram.h>
+#include "sram.h"
 #include <mach/pm.h>
 
 #include "clock.h"

arch/arm/mach-davinci/psc.c

@@ -23,7 +23,7 @@
 #include <linux/io.h>
 
 #include <mach/cputype.h>
-#include <mach/psc.h>
+#include "psc.h"
 
 #include "clock.h"
 

arch/arm/mach-davinci/sleep.S

@@ -21,8 +21,8 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <mach/psc.h>
-#include <mach/ddr2.h>
+#include "psc.h"
+#include "ddr2.h"
 
 #include "clock.h"
 

arch/arm/mach-davinci/sram.c

@@ -14,7 +14,7 @@
 #include <linux/genalloc.h>
 
 #include <mach/common.h>
-#include <mach/sram.h>
+#include "sram.h"
 
 static struct gen_pool *sram_pool;
 

arch/arm/mach-dove/cm-a510.c

@@ -88,6 +88,7 @@ static void __init cm_a510_init(void)
 
 MACHINE_START(CM_A510, "Compulab CM-A510 Board")
 	.atag_offset	= 0x100,
+	.nr_irqs	= DOVE_NR_IRQS,
 	.init_machine	= cm_a510_init,
 	.map_io		= dove_map_io,
 	.init_early	= dove_init_early,

arch/arm/mach-dove/common.c

@@ -16,6 +16,7 @@
 #include <linux/platform_data/dma-mv_xor.h>
 #include <linux/platform_data/usb-ehci-orion.h>
 #include <linux/platform_device.h>
+#include <linux/soc/dove/pmu.h>
 #include <asm/hardware/cache-tauros2.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -375,6 +376,47 @@ void __init dove_setup_cpu_wins(void)
 				    DOVE_SCRATCHPAD_SIZE);
 }
 
+static struct resource orion_wdt_resource[] = {
+		DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x04),
+		DEFINE_RES_MEM(RSTOUTn_MASK_PHYS, 0x04),
+};
+
+static struct platform_device orion_wdt_device = {
+	.name		= "orion_wdt",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(orion_wdt_resource),
+	.resource	= orion_wdt_resource,
+};
+
+static void __init __maybe_unused orion_wdt_init(void)
+{
+	platform_device_register(&orion_wdt_device);
+}
+
+static const struct dove_pmu_domain_initdata pmu_domains[] __initconst = {
+	{
+		.pwr_mask = PMU_PWR_VPU_PWR_DWN_MASK,
+		.rst_mask = PMU_SW_RST_VIDEO_MASK,
+		.iso_mask = PMU_ISO_VIDEO_MASK,
+		.name = "vpu-domain",
+	}, {
+		.pwr_mask = PMU_PWR_GPU_PWR_DWN_MASK,
+		.rst_mask = PMU_SW_RST_GPU_MASK,
+		.iso_mask = PMU_ISO_GPU_MASK,
+		.name = "gpu-domain",
+	}, {
+		/* sentinel */
+	},
+};
+
+static const struct dove_pmu_initdata pmu_data __initconst = {
+	.pmc_base = DOVE_PMU_VIRT_BASE,
+	.pmu_base = DOVE_PMU_VIRT_BASE + 0x8000,
+	.irq = IRQ_DOVE_PMU,
+	.irq_domain_start = IRQ_DOVE_PMU_START,
+	.domains = pmu_domains,
+};
+
 void __init dove_init(void)
 {
 	pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n",
@@ -389,6 +431,7 @@ void __init dove_init(void)
 	dove_clk_init();
 
 	/* internal devices that every board has */
+	dove_init_pmu_legacy(&pmu_data);
 	dove_rtc_init();
 	dove_xor0_init();
 	dove_xor1_init();

arch/arm/mach-dove/dove-db-setup.c

@@ -94,6 +94,7 @@ static void __init dove_db_init(void)
 
 MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
 	.atag_offset	= 0x100,
+	.nr_irqs	= DOVE_NR_IRQS,
 	.init_machine	= dove_db_init,
 	.map_io		= dove_map_io,
 	.init_early	= dove_init_early,

arch/arm/mach-dove/include/mach/dove.h

@@ -11,6 +11,8 @@
 #ifndef __ASM_ARCH_DOVE_H
 #define __ASM_ARCH_DOVE_H
 
+#include <mach/irqs.h>
+
 /*
  * Marvell Dove address maps.
  *

arch/arm/mach-dove/include/mach/entry-macro.S

-/*
- * arch/arm/mach-dove/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell Dove platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/bridge-regs.h>
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =IRQ_VIRT_BASE
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	@ check low interrupts
-	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
-	mov	\irqnr, #32
-	ands	\irqstat, \irqstat, \tmp
-
-	@ if no low interrupts set, check high interrupts
-	ldreq	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
-	ldreq	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
-	moveq	\irqnr, #64
-	andeqs	\irqstat, \irqstat, \tmp
-
-	@ find first active interrupt source
-	clzne	\irqstat, \irqstat
-	subne	\irqnr, \irqnr, \irqstat
-	.endm

arch/arm/mach-dove/include/mach/irqs.h

@@ -90,7 +90,7 @@
 #define NR_PMU_IRQS		7
 #define IRQ_DOVE_RTC		(IRQ_DOVE_PMU_START + 5)
 
-#define NR_IRQS			(IRQ_DOVE_PMU_START + NR_PMU_IRQS)
+#define DOVE_NR_IRQS		(IRQ_DOVE_PMU_START + NR_PMU_IRQS)
 
 
 #endif

arch/arm/mach-dove/include/mach/pm.h

@@ -51,22 +51,14 @@
 #define  CLOCK_GATING_GIGA_PHY_MASK	(1 << CLOCK_GATING_BIT_GIGA_PHY)
 
 #define PMU_INTERRUPT_CAUSE	(DOVE_PMU_VIRT_BASE + 0x50)
-#define PMU_INTERRUPT_MASK	(DOVE_PMU_VIRT_BASE + 0x54)
 
-static inline int pmu_to_irq(int pin)
-{
-	if (pin < NR_PMU_IRQS)
-		return pin + IRQ_DOVE_PMU_START;
+#define  PMU_SW_RST_VIDEO_MASK		BIT(16)
+#define  PMU_SW_RST_GPU_MASK		BIT(18)
 
-	return -EINVAL;
-}
+#define  PMU_PWR_GPU_PWR_DWN_MASK	BIT(2)
+#define  PMU_PWR_VPU_PWR_DWN_MASK	BIT(3)
 
-static inline int irq_to_pmu(int irq)
-{
-	if (IRQ_DOVE_PMU_START <= irq && irq < NR_IRQS)
-		return irq - IRQ_DOVE_PMU_START;
-
-	return -EINVAL;
-}
+#define  PMU_ISO_VIDEO_MASK		BIT(0)
+#define  PMU_ISO_GPU_MASK		BIT(1)
 
 #endif

arch/arm/mach-dove/irq.c

@@ -7,87 +7,15 @@
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-
-#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/irq.h>
-#include <linux/gpio.h>
 #include <linux/io.h>
-#include <asm/mach/arch.h>
+#include <asm/exception.h>
 #include <plat/irq.h>
-#include <asm/mach/irq.h>
-#include <mach/pm.h>
 #include <mach/bridge-regs.h>
 #include <plat/orion-gpio.h>
 #include "common.h"
 
-static void pmu_irq_mask(struct irq_data *d)
-{
-	int pin = irq_to_pmu(d->irq);
-	u32 u;
-
-	u = readl(PMU_INTERRUPT_MASK);
-	u &= ~(1 << (pin & 31));
-	writel(u, PMU_INTERRUPT_MASK);
-}
-
-static void pmu_irq_unmask(struct irq_data *d)
-{
-	int pin = irq_to_pmu(d->irq);
-	u32 u;
-
-	u = readl(PMU_INTERRUPT_MASK);
-	u |= 1 << (pin & 31);
-	writel(u, PMU_INTERRUPT_MASK);
-}
-
-static void pmu_irq_ack(struct irq_data *d)
-{
-	int pin = irq_to_pmu(d->irq);
-	u32 u;
-
-	/*
-	 * The PMU mask register is not RW0C: it is RW.  This means that
-	 * the bits take whatever value is written to them; if you write
-	 * a '1', you will set the interrupt.
-	 *
-	 * Unfortunately this means there is NO race free way to clear
-	 * these interrupts.
-	 *
-	 * So, let's structure the code so that the window is as small as
-	 * possible.
-	 */
-	u = ~(1 << (pin & 31));
-	u &= readl_relaxed(PMU_INTERRUPT_CAUSE);
-	writel_relaxed(u, PMU_INTERRUPT_CAUSE);
-}
-
-static struct irq_chip pmu_irq_chip = {
-	.name		= "pmu_irq",
-	.irq_mask	= pmu_irq_mask,
-	.irq_unmask	= pmu_irq_unmask,
-	.irq_ack	= pmu_irq_ack,
-};
-
-static void pmu_irq_handler(struct irq_desc *desc)
-{
-	unsigned long cause = readl(PMU_INTERRUPT_CAUSE);
-	unsigned int irq;
-
-	cause &= readl(PMU_INTERRUPT_MASK);
-	if (cause == 0) {
-		do_bad_IRQ(desc);
-		return;
-	}
-
-	for (irq = 0; irq < NR_PMU_IRQS; irq++) {
-		if (!(cause & (1 << irq)))
-			continue;
-		irq = pmu_to_irq(irq);
-		generic_handle_irq(irq);
-	}
-}
-
 static int __initdata gpio0_irqs[4] = {
 	IRQ_DOVE_GPIO_0_7,
 	IRQ_DOVE_GPIO_8_15,
@@ -109,14 +37,6 @@ static int __initdata gpio2_irqs[4] = {
 	0,
 };
 
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-/*
- * Compiling with both non-DT and DT support enabled, will
- * break asm irq handler used by non-DT boards. Therefore,
- * we provide a C-style irq handler even for non-DT boards,
- * if MULTI_IRQ_HANDLER is set.
- */
-
 static void __iomem *dove_irq_base = IRQ_VIRT_BASE;
 
 static asmlinkage void
@@ -139,18 +59,13 @@ __exception_irq_entry dove_legacy_handle_irq(struct pt_regs *regs)
 		return;
 	}
 }
-#endif
 
 void __init dove_init_irq(void)
 {
-	int i;
-
 	orion_irq_init(1, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
 	orion_irq_init(33, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
 
-#ifdef CONFIG_MULTI_IRQ_HANDLER
 	set_handle_irq(dove_legacy_handle_irq);
-#endif
 
 	/*
 	 * Initialize gpiolib for GPIOs 0-71.
@@ -163,17 +78,4 @@ void __init dove_init_irq(void)
 
 	orion_gpio_init(NULL, 64, 8, DOVE_GPIO2_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START + 64, gpio2_irqs);
-
-	/*
-	 * Mask and clear PMU interrupts
-	 */
-	writel(0, PMU_INTERRUPT_MASK);
-	writel(0, PMU_INTERRUPT_CAUSE);
-
-	for (i = IRQ_DOVE_PMU_START; i < NR_IRQS; i++) {
-		irq_set_chip_and_handler(i, &pmu_irq_chip, handle_level_irq);
-		irq_set_status_flags(i, IRQ_LEVEL);
-		irq_clear_status_flags(i, IRQ_NOREQUEST);
-	}
-	irq_set_chained_handler(IRQ_DOVE_PMU, pmu_irq_handler);
 }

arch/arm/mach-integrator/Kconfig

-config ARCH_INTEGRATOR
+menuconfig ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
 	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6
 	select ARM_AMBA
@@ -24,8 +24,6 @@ config ARCH_INTEGRATOR
 
 if ARCH_INTEGRATOR
 
-menu "Integrator Options"
-
 config ARCH_INTEGRATOR_AP
 	bool "Support Integrator/AP and Integrator/PP2 platforms"
 	select CLKSRC_MMIO
@@ -37,19 +35,6 @@ config ARCH_INTEGRATOR_AP
 	  Include support for the ARM(R) Integrator/AP and
 	  Integrator/PP2 platforms.
 
-config ARCH_INTEGRATOR_CP
-	bool "Support Integrator/CP platform"
-	select ARCH_CINTEGRATOR
-	select ARM_TIMER_SP804
-	select SERIAL_AMBA_PL011 if TTY
-	select SERIAL_AMBA_PL011_CONSOLE if TTY
-	select SOC_BUS
-	help
-	  Include support for the ARM(R) Integrator CP platform.
-
-config ARCH_CINTEGRATOR
-	bool
-
 config INTEGRATOR_IMPD1
 	bool "Include support for Integrator/IM-PD1"
 	depends on ARCH_INTEGRATOR_AP
@@ -64,6 +49,119 @@ config INTEGRATOR_IMPD1
 	  To compile this driver as a module, choose M here: the
 	  module will be called impd1.
 
-endmenu
+config INTEGRATOR_CM7TDMI
+	bool "Integrator/CM7TDMI core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4 && !MMU
+	select CPU_ARM7TDMI
+
+config INTEGRATOR_CM720T
+	bool "Integrator/CM720T core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4T
+	select CPU_ARM720T
+
+config INTEGRATOR_CM740T
+	bool "Integrator/CM740T core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4T && !MMU
+	select CPU_ARM740T
+
+config INTEGRATOR_CM920T
+	bool "Integrator/CM920T core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4T
+	select CPU_ARM920T
+
+config INTEGRATOR_CM922T_XA10
+	bool "Integrator/CM922T-XA10 core module"
+	depends on ARCH_MULTI_V4T
+	depends on ARCH_INTEGRATOR_AP
+	select CPU_ARM922T
+
+config INTEGRATOR_CM926EJS
+	bool "Integrator/CM926EJ-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V5
+	select CPU_ARM926T
+
+config INTEGRATOR_CM940T
+	bool "Integrator/CM940T core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4T && !MMU
+	select CPU_ARM940T
+
+config INTEGRATOR_CM946ES
+	bool "Integrator/CM946E-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V5 && !MMU
+	select CPU_ARM946E
+
+config INTEGRATOR_CM966ES
+	bool "Integrator/CM966E-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on BROKEN # no kernel support
+
+config INTEGRATOR_CM10200E_REV0
+	bool "Integrator/CM10200E rev.0 core module"
+	depends on ARCH_INTEGRATOR_AP && n
+	depends on ARCH_MULTI_V5
+	select CPU_ARM1020
+
+config INTEGRATOR_CM10200E
+	bool "Integrator/CM10200E core module"
+	depends on ARCH_INTEGRATOR_AP && n
+	depends on ARCH_MULTI_V5
+	select CPU_ARM1020E
+
+config INTEGRATOR_CM10220E
+	bool "Integrator/CM10220E core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V5
+	select CPU_ARM1022
+
+config INTEGRATOR_CM1026EJS
+	bool "Integrator/CM1026EJ-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V5
+	select CPU_ARM1026
+
+config INTEGRATOR_CM1136JFS
+	bool "Integrator/CM1136JF-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V6
+	select CPU_V6
+
+config ARCH_INTEGRATOR_CP
+	bool "Support Integrator/CP platform"
+	depends on (!MMU || ARCH_MULTI_V5 || ARCH_MULTI_V6)
+	select ARM_TIMER_SP804
+	select SERIAL_AMBA_PL011 if TTY
+	select SERIAL_AMBA_PL011_CONSOLE if TTY
+	select SOC_BUS
+	help
+	  Include support for the ARM(R) Integrator CP platform.
+
+config INTEGRATOR_CT7T
+	bool "Integrator/CT7TD (ARM7TDMI) core tile"
+	depends on ARCH_INTEGRATOR_CP
+	depends on ARCH_MULTI_V4T && !MMU
+	select CPU_ARM7TDMI
+
+config INTEGRATOR_CT926
+	bool "Integrator/CT926 (ARM926EJ-S) core tile"
+	depends on ARCH_INTEGRATOR_CP
+	depends on ARCH_MULTI_V5
+	select CPU_ARM926T
+
+config INTEGRATOR_CTB36
+	bool "Integrator/CTB36 (ARM1136JF-S) core tile"
+	depends on ARCH_INTEGRATOR_CP
+	depends on ARCH_MULTI_V6
+	select CPU_V6
+
+config ARCH_CINTEGRATOR
+	depends on ARCH_INTEGRATOR_CP
+	def_bool y
 
 endif

arch/arm/mach-iop13xx/include/mach/pci.h

-#ifndef _IOP13XX_PCI_H_
-#define _IOP13XX_PCI_H_
-#include <linux/io.h>
-#include <mach/irqs.h>
-
-struct pci_sys_data;
-struct hw_pci;
-int iop13xx_pci_setup(int nr, struct pci_sys_data *sys);
-struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *);
-void iop13xx_atu_select(struct hw_pci *plat_pci);
-void iop13xx_pci_init(void);
-void iop13xx_map_pci_memory(void);
-
-#define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY |	     \
-			       PCI_STATUS_SIG_TARGET_ABORT | \
-			       PCI_STATUS_REC_TARGET_ABORT | \
-			       PCI_STATUS_REC_TARGET_ABORT | \
-			       PCI_STATUS_REC_MASTER_ABORT | \
-			       PCI_STATUS_SIG_SYSTEM_ERROR | \
-	 		       PCI_STATUS_DETECTED_PARITY)
-
-#define IOP13XX_ATUE_ATUISR_ERROR (IOP13XX_ATUE_STAT_HALT_ON_ERROR |  \
-				    IOP13XX_ATUE_STAT_ROOT_SYS_ERR |   \
-				    IOP13XX_ATUE_STAT_PCI_IFACE_ERR |  \
-				    IOP13XX_ATUE_STAT_ERR_COR |	       \
-				    IOP13XX_ATUE_STAT_ERR_UNCOR |      \
-				    IOP13XX_ATUE_STAT_CRS |	       \
-				    IOP13XX_ATUE_STAT_DET_PAR_ERR |    \
-				    IOP13XX_ATUE_STAT_EXT_REC_MABORT | \
-				    IOP13XX_ATUE_STAT_SIG_TABORT |     \
-				    IOP13XX_ATUE_STAT_EXT_REC_TABORT | \
-				    IOP13XX_ATUE_STAT_MASTER_DATA_PAR)
-
-#define IOP13XX_ATUX_ATUISR_ERROR (IOP13XX_ATUX_STAT_TX_SCEM |        \
-				    IOP13XX_ATUX_STAT_REC_SCEM |       \
-				    IOP13XX_ATUX_STAT_TX_SERR |	       \
-				    IOP13XX_ATUX_STAT_DET_PAR_ERR |    \
-				    IOP13XX_ATUX_STAT_INT_REC_MABORT | \
-				    IOP13XX_ATUX_STAT_REC_SERR |       \
-				    IOP13XX_ATUX_STAT_EXT_REC_MABORT | \
-				    IOP13XX_ATUX_STAT_EXT_REC_TABORT | \
-				    IOP13XX_ATUX_STAT_EXT_SIG_TABORT | \
-				    IOP13XX_ATUX_STAT_MASTER_DATA_PAR)
-
-/* PCI interrupts
- */
-#define ATUX_INTA IRQ_IOP13XX_XINT0
-#define ATUX_INTB IRQ_IOP13XX_XINT1
-#define ATUX_INTC IRQ_IOP13XX_XINT2
-#define ATUX_INTD IRQ_IOP13XX_XINT3
-
-#define ATUE_INTA IRQ_IOP13XX_ATUE_IMA
-#define ATUE_INTB IRQ_IOP13XX_ATUE_IMB
-#define ATUE_INTC IRQ_IOP13XX_ATUE_IMC
-#define ATUE_INTD IRQ_IOP13XX_ATUE_IMD
-
-#endif /* _IOP13XX_PCI_H_ */

arch/arm/mach-iop13xx/iq81340mc.c

@@ -23,7 +23,7 @@
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/pci.h>
+#include "pci.h"
 #include <asm/mach/time.h>
 #include <mach/time.h>
 

arch/arm/mach-iop13xx/iq81340sc.c

@@ -23,7 +23,7 @@
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/pci.h>
+#include "pci.h"
 #include <asm/mach/time.h>
 #include <mach/time.h>
 

arch/arm/mach-iop13xx/irq.c

@@ -25,7 +25,7 @@
 #include <asm/irq.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/msi.h>
+#include "msi.h"
 
 /* INTCTL0 CP6 R0 Page 4
  */

arch/arm/mach-iop13xx/pci.c

@@ -27,7 +27,7 @@
 #include <asm/sizes.h>
 #include <asm/signal.h>
 #include <asm/mach/pci.h>
-#include <mach/pci.h>
+#include "pci.h"
 
 #define IOP13XX_PCI_DEBUG 0
 #define PRINTK(x...) ((void)(IOP13XX_PCI_DEBUG && printk(x)))

arch/arm/mach-iop13xx/pci.h

+#ifndef _IOP13XX_PCI_H_
+#define _IOP13XX_PCI_H_
+#include <linux/io.h>
+#include <mach/irqs.h>
+
 #include <linux/types.h>
 
 extern void __iomem *iop13xx_atue_mem_base;
 extern void __iomem *iop13xx_atux_mem_base;
 extern size_t iop13xx_atue_mem_size;
 extern size_t iop13xx_atux_mem_size;
+
+struct pci_sys_data;
+struct hw_pci;
+int iop13xx_pci_setup(int nr, struct pci_sys_data *sys);
+struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *);
+void iop13xx_atu_select(struct hw_pci *plat_pci);
+void iop13xx_pci_init(void);
+void iop13xx_map_pci_memory(void);
+
+#define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY |	     \
+			       PCI_STATUS_SIG_TARGET_ABORT | \
+			       PCI_STATUS_REC_TARGET_ABORT | \
+			       PCI_STATUS_REC_TARGET_ABORT | \
+			       PCI_STATUS_REC_MASTER_ABORT | \
+			       PCI_STATUS_SIG_SYSTEM_ERROR | \
+	 		       PCI_STATUS_DETECTED_PARITY)
+
+#define IOP13XX_ATUE_ATUISR_ERROR (IOP13XX_ATUE_STAT_HALT_ON_ERROR |  \
+				    IOP13XX_ATUE_STAT_ROOT_SYS_ERR |   \
+				    IOP13XX_ATUE_STAT_PCI_IFACE_ERR |  \
+				    IOP13XX_ATUE_STAT_ERR_COR |	       \
+				    IOP13XX_ATUE_STAT_ERR_UNCOR |      \
+				    IOP13XX_ATUE_STAT_CRS |	       \
+				    IOP13XX_ATUE_STAT_DET_PAR_ERR |    \
+				    IOP13XX_ATUE_STAT_EXT_REC_MABORT | \
+				    IOP13XX_ATUE_STAT_SIG_TABORT |     \
+				    IOP13XX_ATUE_STAT_EXT_REC_TABORT | \
+				    IOP13XX_ATUE_STAT_MASTER_DATA_PAR)
+
+#define IOP13XX_ATUX_ATUISR_ERROR (IOP13XX_ATUX_STAT_TX_SCEM |        \
+				    IOP13XX_ATUX_STAT_REC_SCEM |       \
+				    IOP13XX_ATUX_STAT_TX_SERR |	       \
+				    IOP13XX_ATUX_STAT_DET_PAR_ERR |    \
+				    IOP13XX_ATUX_STAT_INT_REC_MABORT | \
+				    IOP13XX_ATUX_STAT_REC_SERR |       \
+				    IOP13XX_ATUX_STAT_EXT_REC_MABORT | \
+				    IOP13XX_ATUX_STAT_EXT_REC_TABORT | \
+				    IOP13XX_ATUX_STAT_EXT_SIG_TABORT | \
+				    IOP13XX_ATUX_STAT_MASTER_DATA_PAR)
+
+/* PCI interrupts
+ */
+#define ATUX_INTA IRQ_IOP13XX_XINT0
+#define ATUX_INTB IRQ_IOP13XX_XINT1
+#define ATUX_INTC IRQ_IOP13XX_XINT2
+#define ATUX_INTD IRQ_IOP13XX_XINT3
+
+#define ATUE_INTA IRQ_IOP13XX_ATUE_IMA
+#define ATUE_INTB IRQ_IOP13XX_ATUE_IMB
+#define ATUE_INTC IRQ_IOP13XX_ATUE_IMC
+#define ATUE_INTD IRQ_IOP13XX_ATUE_IMD
+
+#endif /* _IOP13XX_PCI_H_ */

arch/arm/mach-ks8695/board-acs5k.c

@@ -33,7 +33,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/devices.h>
+#include "devices.h"
 #include <mach/gpio-ks8695.h>
 
 #include "generic.h"

arch/arm/mach-ks8695/board-dsm320.c

@@ -28,7 +28,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/devices.h>
+#include "devices.h"
 #include <mach/gpio-ks8695.h>
 
 #include "generic.h"

arch/arm/mach-ks8695/board-micrel.c

@@ -19,7 +19,7 @@
 #include <asm/mach/irq.h>
 
 #include <mach/gpio-ks8695.h>
-#include <mach/devices.h>
+#include "devices.h"
 
 #include "generic.h"
 

arch/arm/mach-ks8695/board-og.c

@@ -18,7 +18,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <mach/devices.h>
+#include "devices.h"
 #include <mach/regs-gpio.h>
 #include <mach/gpio-ks8695.h>
 #include "generic.h"

arch/arm/mach-ks8695/board-sg.c

@@ -16,7 +16,7 @@
 #include <linux/mtd/partitions.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/devices.h>
+#include "devices.h"
 #include "generic.h"
 
 /*

arch/arm/mach-ks8695/cpu.c

@@ -30,7 +30,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/regs-sys.h>
+#include "regs-sys.h"
 #include <mach/regs-misc.h>
 
 

arch/arm/mach-ks8695/devices.c

@@ -24,9 +24,9 @@
 #include <linux/platform_device.h>
 
 #include <mach/irqs.h>
-#include <mach/regs-wan.h>
-#include <mach/regs-lan.h>
-#include <mach/regs-hpna.h>
+#include "regs-wan.h"
+#include "regs-lan.h"
+#include "regs-hpna.h"
 #include <mach/regs-switch.h>
 #include <mach/regs-misc.h>
 

arch/arm/mach-ks8695/pci.c

@@ -33,8 +33,8 @@
 #include <asm/mach/pci.h>
 #include <mach/hardware.h>
 
-#include <mach/devices.h>
-#include <mach/regs-pci.h>
+#include "devices.h"
+#include "regs-pci.h"
 
 
 static int pci_dbg;

arch/arm/mach-mmp/Kconfig

+menuconfig ARCH_MMP
+	bool "Marvell PXA168/910/MMP2"
+	depends on ARCH_MULTI_V5 || ARCH_MULTI_V7
+	select ARCH_REQUIRE_GPIOLIB
+	select GPIO_PXA
+	select PINCTRL
+	select PLAT_PXA
+	help
+	  Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
+
 if ARCH_MMP
 
-menu "Marvell PXA168/910/MMP2 Implmentations"
+menu "Marvell PXA168/910/MMP2 Implementations"
+
+if ATAGS
 
 config MACH_ASPENITE
 	bool "Marvell's PXA168 Aspenite Development Board"
+	depends on ARCH_MULTI_V5
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
@@ -11,6 +24,7 @@ config MACH_ASPENITE
 
 config MACH_ZYLONITE2
 	bool "Marvell's PXA168 Zylonite2 Development Board"
+	depends on ARCH_MULTI_V5
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
@@ -18,6 +32,7 @@ config MACH_ZYLONITE2
 
 config MACH_AVENGERS_LITE
 	bool "Marvell's PXA168 Avengers Lite Development Board"
+	depends on ARCH_MULTI_V5
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
@@ -25,6 +40,7 @@ config MACH_AVENGERS_LITE
 
 config MACH_TAVOREVB
 	bool "Marvell's PXA910 TavorEVB Development Board"
+	depends on ARCH_MULTI_V5
 	select CPU_PXA910
 	help
 	  Say 'Y' here if you want to support the Marvell PXA910-based
@@ -32,6 +48,7 @@ config MACH_TAVOREVB
 
 config MACH_TTC_DKB
 	bool "Marvell's PXA910 TavorEVB Development Board"
+	depends on ARCH_MULTI_V5
 	select CPU_PXA910
 	help
 	  Say 'Y' here if you want to support the Marvell PXA910-based
@@ -39,7 +56,7 @@ config MACH_TTC_DKB
 
 config MACH_BROWNSTONE
 	bool "Marvell's Brownstone Development Platform"
-	depends on !CPU_MOHAWK
+	depends on ARCH_MULTI_V7
 	select CPU_MMP2
 	help
 	  Say 'Y' here if you want to support the Marvell MMP2-based
@@ -50,7 +67,7 @@ config MACH_BROWNSTONE
 
 config MACH_FLINT
 	bool "Marvell's Flint Development Platform"
-	depends on !CPU_MOHAWK
+	depends on ARCH_MULTI_V7
 	select CPU_MMP2
 	help
 	  Say 'Y' here if you want to support the Marvell MMP2-based
@@ -61,7 +78,7 @@ config MACH_FLINT
 
 config MACH_MARVELL_JASPER
 	bool "Marvell's Jasper Development Platform"
-	depends on !CPU_MOHAWK
+	depends on ARCH_MULTI_V7
 	select CPU_MMP2
 	help
 	  Say 'Y' here if you want to support the Marvell MMP2-base
@@ -72,6 +89,7 @@ config MACH_MARVELL_JASPER
 
 config MACH_TETON_BGA
 	bool "Marvell's PXA168 Teton BGA Development Board"
+	depends on ARCH_MULTI_V5
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
@@ -79,14 +97,16 @@ config MACH_TETON_BGA
 
 config MACH_GPLUGD
 	bool "Marvell's PXA168 GuruPlug Display (gplugD) Board"
+	depends on ARCH_MULTI_V5
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
 	  GuruPlug Display (gplugD) Board
+endif
 
 config MACH_MMP_DT
 	bool "Support MMP (ARMv5) platforms from device tree"
-	select USE_OF
+	depends on ARCH_MULTI_V5
 	select PINCTRL
 	select PINCTRL_SINGLE
 	select COMMON_CLK
@@ -99,11 +119,9 @@ config MACH_MMP_DT
 
 config MACH_MMP2_DT
 	bool "Support MMP2 (ARMv7) platforms from device tree"
-	depends on !CPU_MOHAWK
-	select USE_OF
+	depends on ARCH_MULTI_V7
 	select PINCTRL
 	select PINCTRL_SINGLE
-	select COMMON_CLK
 	select ARCH_HAS_RESET_CONTROLLER
 	select CPU_PJ4
 	help

arch/arm/mach-mmp/Makefile

 #
 # Makefile for Marvell's PXA168 processors line
 #
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-pxa/include
 
 obj-y				+= common.o devices.o time.o
 

arch/arm/mach-mmp/include/mach/addr-map.h → arch/arm/mach-mmp/addr-map.h

 /*
- * linux/arch/arm/mach-mmp/include/mach/addr-map.h
- *
  *   Common address map definitions
  *
  * This program is free software; you can redistribute it and/or modify

arch/arm/mach-mmp/aspenite.c

@@ -22,14 +22,14 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-pxa168.h>
-#include <mach/pxa168.h>
-#include <mach/irqs.h>
 #include <video/pxa168fb.h>
 #include <linux/input.h>
 #include <linux/platform_data/keypad-pxa27x.h>
 
+#include "addr-map.h"
+#include "mfp-pxa168.h"
+#include "pxa168.h"
+#include "irqs.h"
 #include "common.h"
 
 static unsigned long common_pin_config[] __initdata = {

arch/arm/mach-mmp/avengers_lite.c

@@ -17,10 +17,10 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-pxa168.h>
-#include <mach/pxa168.h>
-#include <mach/irqs.h>
+#include "addr-map.h"
+#include "mfp-pxa168.h"
+#include "pxa168.h"
+#include "irqs.h"
 
 
 #include "common.h"

arch/arm/mach-mmp/brownstone.c

@@ -22,10 +22,10 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-mmp2.h>
-#include <mach/mmp2.h>
-#include <mach/irqs.h>
+#include "addr-map.h"
+#include "mfp-mmp2.h"
+#include "mmp2.h"
+#include "irqs.h"
 
 #include "common.h"
 

arch/arm/mach-mmp/clock-mmp2.c

@@ -4,8 +4,9 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/clk/mmp.h>
 
-#include <mach/addr-map.h>
+#include "addr-map.h"
 
 #include "common.h"
 #include "clock.h"
@@ -105,7 +106,8 @@ static struct clk_lookup mmp2_clkregs[] = {
 	INIT_CLKREG(&clk_sdh3, "sdhci-pxav3.3", "PXA-SDHCLK"),
 };
 
-void __init mmp2_clk_init(void)
+void __init mmp2_clk_init(phys_addr_t mpmu_phys, phys_addr_t apmu_phys,
+			  phys_addr_t apbc_phys)
 {
 	clkdev_add_table(ARRAY_AND_SIZE(mmp2_clkregs));
 }

arch/arm/mach-mmp/clock-pxa168.c

@@ -4,8 +4,9 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/clk/mmp.h>
 
-#include <mach/addr-map.h>
+#include "addr-map.h"
 
 #include "common.h"
 #include "clock.h"
@@ -85,7 +86,8 @@ static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
 };
 
-void __init pxa168_clk_init(void)
+void __init pxa168_clk_init(phys_addr_t mpmu_phys, phys_addr_t apmu_phys,
+			    phys_addr_t apbc_phys)
 {
 	clkdev_add_table(ARRAY_AND_SIZE(pxa168_clkregs));
 }

arch/arm/mach-mmp/clock-pxa910.c

@@ -4,8 +4,9 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/clk/mmp.h>
 
-#include <mach/addr-map.h>
+#include "addr-map.h"
 
 #include "common.h"
 #include "clock.h"
@@ -61,7 +62,8 @@ static struct clk_lookup pxa910_clkregs[] = {
 	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
 };
 
-void __init pxa910_clk_init(void)
+void __init pxa910_clk_init(phys_addr_t mpmu_phys, phys_addr_t apmu_phys,
+			    phys_addr_t apbc_phys, phys_addr_t apbcp_phys)
 {
 	clkdev_add_table(ARRAY_AND_SIZE(pxa910_clkregs));
 }

arch/arm/mach-mmp/clock.c

@@ -13,7 +13,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <mach/regs-apbc.h>
+#include "regs-apbc.h"
 #include "clock.h"
 
 static void apbc_clk_enable(struct clk *clk)

arch/arm/mach-mmp/clock.h

 /*
- *  linux/arch/arm/mach-mmp/clock.h
- *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation.

arch/arm/mach-mmp/common.c

@@ -15,8 +15,8 @@
 #include <asm/page.h>
 #include <asm/mach/map.h>
 #include <asm/system_misc.h>
-#include <mach/addr-map.h>
-#include <mach/cputype.h>
+#include "addr-map.h"
+#include "cputype.h"
 
 #include "common.h"
 

arch/arm/mach-mmp/common.h

@@ -5,6 +5,3 @@ extern void timer_init(int irq);
 
 extern void __init mmp_map_io(void);
 extern void mmp_restart(enum reboot_mode, const char *);
-extern void __init pxa168_clk_init(void);
-extern void __init pxa910_clk_init(void);
-extern void __init mmp2_clk_init(void);

arch/arm/mach-mmp/devices.c

@@ -12,10 +12,10 @@
 #include <linux/delay.h>
 
 #include <asm/irq.h>
-#include <mach/irqs.h>
-#include <mach/devices.h>
-#include <mach/cputype.h>
-#include <mach/regs-usb.h>
+#include "irqs.h"
+#include "devices.h"
+#include "cputype.h"
+#include "regs-usb.h"
 
 int __init pxa_register_device(struct pxa_device_desc *desc,
 				void *data, size_t size)
@@ -73,6 +73,8 @@ int __init pxa_register_device(struct pxa_device_desc *desc,
 }
 
 #if IS_ENABLED(CONFIG_USB) || IS_ENABLED(CONFIG_USB_GADGET)
+#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV)
+#if IS_ENABLED(CONFIG_CPU_PXA910) || IS_ENABLED(CONFIG_CPU_PXA168)
 
 /*****************************************************************************
  * The registers read/write routines
@@ -112,9 +114,6 @@ static void u2o_write(void __iomem *base, unsigned int offset,
 	readl_relaxed(base + offset);
 }
 
-#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV)
-
-#if IS_ENABLED(CONFIG_CPU_PXA910) || IS_ENABLED(CONFIG_CPU_PXA168)
 
 static DEFINE_MUTEX(phy_lock);
 static int phy_init_cnt;

arch/arm/mach-mmp/flint.c

@@ -21,10 +21,10 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-mmp2.h>
-#include <mach/mmp2.h>
-#include <mach/irqs.h>
+#include "addr-map.h"
+#include "mfp-mmp2.h"
+#include "mmp2.h"
+#include "irqs.h"
 
 #include "common.h"
 

arch/arm/mach-mmp/gplugd.c

@@ -16,9 +16,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <mach/irqs.h>
-#include <mach/pxa168.h>
-#include <mach/mfp-pxa168.h>
+#include "irqs.h"
+#include "pxa168.h"
+#include "mfp-pxa168.h"
 
 #include "common.h"
 

arch/arm/mach-mmp/include/mach/dma.h

-/*
- * linux/arch/arm/mach-mmp/include/mach/dma.h
- */
-
-#ifndef __ASM_MACH_DMA_H
-#define __ASM_MACH_DMA_H
-
-#include <mach/addr-map.h>
-
-#define DMAC_REGS_VIRT	(APB_VIRT_BASE + 0x00000)
-
-#include <plat/dma.h>
-#endif /* __ASM_MACH_DMA_H */

arch/arm/mach-mmp/include/mach/hardware.h

-#ifndef __ASM_MACH_HARDWARE_H
-#define __ASM_MACH_HARDWARE_H
-
-#endif /* __ASM_MACH_HARDWARE_H */

arch/arm/mach-mmp/include/mach/regs-smc.h

-/*
- * linux/arch/arm/mach-mmp/include/mach/regs-smc.h
- *
- *  Static Memory Controller Registers
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_REGS_SMC_H
-#define __ASM_MACH_REGS_SMC_H
-
-#include <mach/addr-map.h>
-
-#define SMC_VIRT_BASE		(AXI_VIRT_BASE + 0x83800)
-#define SMC_REG(x)		(SMC_VIRT_BASE + (x))
-
-#define SMC_MSC0		SMC_REG(0x0020)
-#define SMC_MSC1		SMC_REG(0x0024)
-#define SMC_SXCNFG0		SMC_REG(0x0030)
-#define SMC_SXCNFG1		SMC_REG(0x0034)
-#define SMC_MEMCLKCFG		SMC_REG(0x0068)
-#define SMC_CSDFICFG0		SMC_REG(0x0090)
-#define SMC_CSDFICFG1		SMC_REG(0x0094)
-#define SMC_CLK_RET_DEL		SMC_REG(0x00b0)
-#define SMC_ADV_RET_DEL		SMC_REG(0x00b4)
-#define SMC_CSADRMAP0		SMC_REG(0x00c0)
-#define SMC_CSADRMAP1		SMC_REG(0x00c4)
-#define SMC_WE_AP0		SMC_REG(0x00e0)
-#define SMC_WE_AP1		SMC_REG(0x00e4)
-#define SMC_OE_AP0		SMC_REG(0x00f0)
-#define SMC_OE_AP1		SMC_REG(0x00f4)
-#define SMC_ADV_AP0		SMC_REG(0x0100)
-#define SMC_ADV_AP1		SMC_REG(0x0104)
-
-#endif /* __ASM_MACH_REGS_SMC_H */

arch/arm/mach-mmp/include/mach/uncompress.h

-/*
- * arch/arm/mach-mmp/include/mach/uncompress.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/serial_reg.h>
-#include <mach/addr-map.h>
-#include <asm/mach-types.h>
-
-#define UART1_BASE	(APB_PHYS_BASE + 0x36000)
-#define UART2_BASE	(APB_PHYS_BASE + 0x17000)
-#define UART3_BASE	(APB_PHYS_BASE + 0x18000)
-
-volatile unsigned long *UART;
-
-static inline void putc(char c)
-{
-	/* UART enabled? */
-	if (!(UART[UART_IER] & UART_IER_UUE))
-		return;
-
-	while (!(UART[UART_LSR] & UART_LSR_THRE))
-		barrier();
-
-	UART[UART_TX] = c;
-}
-
-/*
- * This does not append a newline
- */
-static inline void flush(void)
-{
-}
-
-static inline void arch_decomp_setup(void)
-{
-	/* default to UART2 */
-	UART = (unsigned long *)UART2_BASE;
-
-	if (machine_is_avengers_lite())
-		UART = (unsigned long *)UART3_BASE;
-}

arch/arm/mach-mmp/jasper.c

@@ -20,12 +20,12 @@
 #include <linux/mfd/max8925.h>
 #include <linux/interrupt.h>
 
-#include <mach/irqs.h>
+#include "irqs.h"
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-mmp2.h>
-#include <mach/mmp2.h>
+#include "addr-map.h"
+#include "mfp-mmp2.h"
+#include "mmp2.h"
 
 #include "common.h"
 

arch/arm/mach-mmp/include/mach/mfp-mmp2.h → arch/arm/mach-mmp/mfp-mmp2.h

 #ifndef __ASM_MACH_MFP_MMP2_H
 #define __ASM_MACH_MFP_MMP2_H
 
-#include <mach/mfp.h>
+#include "mfp.h"
 
 #define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
 #define MFP_DRIVE_SLOW		(0x2 << 13)

arch/arm/mach-mmp/include/mach/mfp-pxa168.h → arch/arm/mach-mmp/mfp-pxa168.h

 #ifndef __ASM_MACH_MFP_PXA168_H
 #define __ASM_MACH_MFP_PXA168_H
 
-#include <mach/mfp.h>
+#include "mfp.h"
 
 #define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
 #define MFP_DRIVE_SLOW		(0x1 << 13)

arch/arm/mach-mmp/include/mach/mfp-pxa910.h → arch/arm/mach-mmp/mfp-pxa910.h

 #ifndef __ASM_MACH_MFP_PXA910_H
 #define __ASM_MACH_MFP_PXA910_H
 
-#include <mach/mfp.h>
+#include "mfp.h"
 
 #define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
 #define MFP_DRIVE_SLOW		(0x2 << 13)