Skip to content

L
linux
Commit 6bd1fbea authored by Sonic Zhang's avatar Sonic Zhang Committed by Mike Frysinger
Browse files
Options

Blackfin: move on-chip UART resources to boards files 

Rather than keeping the pins in the actual driver and worrying about a
mess of Kconfig options, declare all the desired pin resources in the
boards file.  This lets people easily select the specific pins/ports for
the normal UART as well as GPIOs for CTS/RTS.
Signed-off-by: default avatarSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
parent 57d54889
Show whitespace changes
Inline Side-by-side
Showing with 1667 additions and 196 deletions
arch/blackfin/mach-bf518/boards/ezbrd.c
View file @ 6bd1fbea
...@@ -382,30 +382,93 @@ static struct platform_device bfin_spi1_device = { ...@@ -382,30 +382,93 @@ static struct platform_device bfin_spi1_device = {
#endif /* spi master and devices */ #endif /* spi master and devices */
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
#ifdef CONFIG_SERIAL_BFIN_UART0 #ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{ {
.start = 0xFFC00400, .start = UART0_THR,
.end = 0xFFC004FF, .end = UART0_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_ERROR,
.end = IRQ_UART0_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART0_TX,
.end = CH_UART0_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART0_RX,
.end = CH_UART0_RX,
.flags = IORESOURCE_DMA,
},
};
unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
};
static struct platform_device bfin_uart0_device = {
.name = "bfin-uart",
.id = 0,
.num_resources = ARRAY_SIZE(bfin_uart0_resources),
.resource = bfin_uart0_resources,
.dev = {
.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
},
};
#endif #endif
#ifdef CONFIG_SERIAL_BFIN_UART1 #ifdef CONFIG_SERIAL_BFIN_UART1
static struct resource bfin_uart1_resources[] = {
{ {
.start = 0xFFC02000, .start = UART1_THR,
.end = 0xFFC020FF, .end = UART1_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
#endif {
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_ERROR,
.end = IRQ_UART1_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART1_TX,
.end = CH_UART1_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART1_RX,
.end = CH_UART1_RX,
.flags = IORESOURCE_DMA,
},
}; };
static struct platform_device bfin_uart_device = { unsigned short bfin_uart1_peripherals[] = {
P_UART1_TX, P_UART1_RX, 0
};
static struct platform_device bfin_uart1_device = {
.name = "bfin-uart", .name = "bfin-uart",
.id = 1, .id = 1,
.num_resources = ARRAY_SIZE(bfin_uart_resources), .num_resources = ARRAY_SIZE(bfin_uart1_resources),
.resource = bfin_uart_resources, .resource = bfin_uart1_resources,
.dev = {
.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
},
}; };
#endif #endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0 #ifdef CONFIG_BFIN_SIR0
...@@ -593,7 +656,12 @@ static struct platform_device *stamp_devices[] __initdata = { ...@@ -593,7 +656,12 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device, #ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
&bfin_uart1_device,
#endif
#endif #endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
......
arch/blackfin/mach-bf527/boards/cm_bf527.c
View file @ 6bd1fbea
...@@ -603,30 +603,105 @@ static struct platform_device cm_flash_device = { ...@@ -603,30 +603,105 @@ static struct platform_device cm_flash_device = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
#ifdef CONFIG_SERIAL_BFIN_UART0 #ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{ {
.start = 0xFFC00400, .start = UART0_THR,
.end = 0xFFC004FF, .end = UART0_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_ERROR,
.end = IRQ_UART0_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART0_TX,
.end = CH_UART0_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART0_RX,
.end = CH_UART0_RX,
.flags = IORESOURCE_DMA,
},
};
unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
};
static struct platform_device bfin_uart0_device = {
.name = "bfin-uart",
.id = 0,
.num_resources = ARRAY_SIZE(bfin_uart0_resources),
.resource = bfin_uart0_resources,
.dev = {
.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
},
};
#endif #endif
#ifdef CONFIG_SERIAL_BFIN_UART1 #ifdef CONFIG_SERIAL_BFIN_UART1
static struct resource bfin_uart1_resources[] = {
{ {
.start = 0xFFC02000, .start = UART1_THR,
.end = 0xFFC020FF, .end = UART1_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_ERROR,
.end = IRQ_UART1_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART1_TX,
.end = CH_UART1_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART1_RX,
.end = CH_UART1_RX,
.flags = IORESOURCE_DMA,
},
#ifdef CONFIG_BFIN_UART1_CTSRTS
{ /* CTS pin */
.start = GPIO_PF9,
.end = GPIO_PF9,
.flags = IORESOURCE_IO,
},
{ /* RTS pin */
.start = GPIO_PF10,
.end = GPIO_PF10,
.flags = IORESOURCE_IO,
},
#endif #endif
}; };
static struct platform_device bfin_uart_device = { unsigned short bfin_uart1_peripherals[] = {
P_UART1_TX, P_UART1_RX, 0
};
static struct platform_device bfin_uart1_device = {
.name = "bfin-uart", .name = "bfin-uart",
.id = 1, .id = 1,
.num_resources = ARRAY_SIZE(bfin_uart_resources), .num_resources = ARRAY_SIZE(bfin_uart1_resources),
.resource = bfin_uart_resources, .resource = bfin_uart1_resources,
.dev = {
.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
},
}; };
#endif #endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0 #ifdef CONFIG_BFIN_SIR0
...@@ -829,7 +904,12 @@ static struct platform_device *cmbf527_devices[] __initdata = { ...@@ -829,7 +904,12 @@ static struct platform_device *cmbf527_devices[] __initdata = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device, #ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
&bfin_uart1_device,
#endif
#endif #endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
......
arch/blackfin/mach-bf527/boards/ezbrd.c
View file @ 6bd1fbea
...@@ -439,30 +439,105 @@ static struct platform_device bfin_spi0_device = { ...@@ -439,30 +439,105 @@ static struct platform_device bfin_spi0_device = {
#endif /* spi master and devices */ #endif /* spi master and devices */
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
#ifdef CONFIG_SERIAL_BFIN_UART0 #ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{ {
.start = 0xFFC00400, .start = UART0_THR,
.end = 0xFFC004FF, .end = UART0_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_ERROR,
.end = IRQ_UART0_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART0_TX,
.end = CH_UART0_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART0_RX,
.end = CH_UART0_RX,
.flags = IORESOURCE_DMA,
},
};
unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
};
static struct platform_device bfin_uart0_device = {
.name = "bfin-uart",
.id = 0,
.num_resources = ARRAY_SIZE(bfin_uart0_resources),
.resource = bfin_uart0_resources,
.dev = {
.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
},
};
#endif #endif
#ifdef CONFIG_SERIAL_BFIN_UART1 #ifdef CONFIG_SERIAL_BFIN_UART1
static struct resource bfin_uart1_resources[] = {
{ {
.start = 0xFFC02000, .start = UART1_THR,
.end = 0xFFC020FF, .end = UART1_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_ERROR,
.end = IRQ_UART1_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART1_TX,
.end = CH_UART1_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART1_RX,
.end = CH_UART1_RX,
.flags = IORESOURCE_DMA,
},
#ifdef CONFIG_BFIN_UART1_CTSRTS
{ /* CTS pin */
.start = GPIO_PG0,
.end = GPIO_PG0,
.flags = IORESOURCE_IO,
},
{ /* RTS pin */
.start = GPIO_PF10,
.end = GPIO_PF10,
.flags = IORESOURCE_IO,
},
#endif #endif
}; };
static struct platform_device bfin_uart_device = { unsigned short bfin_uart1_peripherals[] = {
P_UART1_TX, P_UART1_RX, 0
};
static struct platform_device bfin_uart1_device = {
.name = "bfin-uart", .name = "bfin-uart",
.id = 1, .id = 1,
.num_resources = ARRAY_SIZE(bfin_uart_resources), .num_resources = ARRAY_SIZE(bfin_uart1_resources),
.resource = bfin_uart_resources, .resource = bfin_uart1_resources,
.dev = {
.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
},
}; };
#endif #endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0 #ifdef CONFIG_BFIN_SIR0
...@@ -665,7 +740,12 @@ static struct platform_device *stamp_devices[] __initdata = { ...@@ -665,7 +740,12 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device, #ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
&bfin_uart1_device,
#endif
#endif #endif
#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
......
arch/blackfin/mach-bf527/boards/ezkit.c
View file @ 6bd1fbea
...@@ -647,30 +647,105 @@ static struct platform_device bfin_spi0_device = { ...@@ -647,30 +647,105 @@ static struct platform_device bfin_spi0_device = {
#endif /* spi master and devices */ #endif /* spi master and devices */
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
#ifdef CONFIG_SERIAL_BFIN_UART0 #ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{ {
.start = 0xFFC00400, .start = UART0_THR,
.end = 0xFFC004FF, .end = UART0_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_ERROR,
.end = IRQ_UART0_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART0_TX,
.end = CH_UART0_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART0_RX,
.end = CH_UART0_RX,
.flags = IORESOURCE_DMA,
},
};
unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
};
static struct platform_device bfin_uart0_device = {
.name = "bfin-uart",
.id = 0,
.num_resources = ARRAY_SIZE(bfin_uart0_resources),
.resource = bfin_uart0_resources,
.dev = {
.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
},
};
#endif #endif
#ifdef CONFIG_SERIAL_BFIN_UART1 #ifdef CONFIG_SERIAL_BFIN_UART1
static struct resource bfin_uart1_resources[] = {
{ {
.start = 0xFFC02000, .start = UART1_THR,
.end = 0xFFC020FF, .end = UART1_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_ERROR,
.end = IRQ_UART1_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART1_TX,
.end = CH_UART1_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART1_RX,
.end = CH_UART1_RX,
.flags = IORESOURCE_DMA,
},
#ifdef CONFIG_BFIN_UART1_CTSRTS
{ /* CTS pin */
.start = GPIO_PF9,
.end = GPIO_PF9,
.flags = IORESOURCE_IO,
},
{ /* RTS pin */
.start = GPIO_PF10,
.end = GPIO_PF10,
.flags = IORESOURCE_IO,
},
#endif #endif
}; };
static struct platform_device bfin_uart_device = { unsigned short bfin_uart1_peripherals[] = {
P_UART1_TX, P_UART1_RX, 0
};
static struct platform_device bfin_uart1_device = {
.name = "bfin-uart", .name = "bfin-uart",
.id = 1, .id = 1,
.num_resources = ARRAY_SIZE(bfin_uart_resources), .num_resources = ARRAY_SIZE(bfin_uart1_resources),
.resource = bfin_uart_resources, .resource = bfin_uart1_resources,
.dev = {
.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
},
}; };
#endif #endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0 #ifdef CONFIG_BFIN_SIR0
...@@ -910,7 +985,12 @@ static struct platform_device *stamp_devices[] __initdata = { ...@@ -910,7 +985,12 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device, #ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
&bfin_uart1_device,
#endif
#endif #endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
......
arch/blackfin/mach-bf533/boards/H8606.c
View file @ 6bd1fbea
...@@ -257,21 +257,50 @@ static struct platform_device bfin_spi0_device = { ...@@ -257,21 +257,50 @@ static struct platform_device bfin_spi0_device = {
#endif /* spi master and devices */ #endif /* spi master and devices */
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = { #ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{ {
.start = 0xFFC00400, .start = BFIN_UART_THR,
.end = 0xFFC004FF, .end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX + 1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_ERROR,
.end = IRQ_UART0_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART0_TX,
.end = CH_UART0_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART0_RX,
.end = CH_UART0_RX,
.flags = IORESOURCE_DMA,
},
};
unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
}; };
static struct platform_device bfin_uart_device = { static struct platform_device bfin_uart0_device = {
.name = "bfin-uart", .name = "bfin-uart",
.id = 1, .id = 0,
.num_resources = ARRAY_SIZE(bfin_uart_resources), .num_resources = ARRAY_SIZE(bfin_uart0_resources),
.resource = bfin_uart_resources, .resource = bfin_uart0_resources,
.dev = {
.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
},
}; };
#endif #endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0 #ifdef CONFIG_BFIN_SIR0
...@@ -394,7 +423,9 @@ static struct platform_device *h8606_devices[] __initdata = { ...@@ -394,7 +423,9 @@ static struct platform_device *h8606_devices[] __initdata = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device, #ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif #endif
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
......
arch/blackfin/mach-bf533/boards/blackstamp.c
View file @ 6bd1fbea
...@@ -195,21 +195,50 @@ static struct platform_device bfin_spi0_device = { ...@@ -195,21 +195,50 @@ static struct platform_device bfin_spi0_device = {
#endif /* spi master and devices */ #endif /* spi master and devices */
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = { #ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{ {
.start = 0xFFC00400, .start = BFIN_UART_THR,
.end = 0xFFC004FF, .end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX + 1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_ERROR,
.end = IRQ_UART0_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART0_TX,
.end = CH_UART0_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART0_RX,
.end = CH_UART0_RX,
.flags = IORESOURCE_DMA,
},
};
unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
}; };
static struct platform_device bfin_uart_device = { static struct platform_device bfin_uart0_device = {
.name = "bfin-uart", .name = "bfin-uart",
.id = 1, .id = 0,
.num_resources = ARRAY_SIZE(bfin_uart_resources), .num_resources = ARRAY_SIZE(bfin_uart0_resources),
.resource = bfin_uart_resources, .resource = bfin_uart0_resources,
.dev = {
.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
},
}; };
#endif #endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0 #ifdef CONFIG_BFIN_SIR0
...@@ -344,7 +373,9 @@ static struct platform_device *stamp_devices[] __initdata = { ...@@ -344,7 +373,9 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device, #ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif #endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
......
arch/blackfin/mach-bf533/boards/cm_bf533.c
View file @ 6bd1fbea
...@@ -242,21 +242,50 @@ static struct platform_device smsc911x_device = { ...@@ -242,21 +242,50 @@ static struct platform_device smsc911x_device = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = { #ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{ {
.start = 0xFFC00400, .start = BFIN_UART_THR,
.end = 0xFFC004FF, .end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX + 1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_ERROR,
.end = IRQ_UART0_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART0_TX,
.end = CH_UART0_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART0_RX,
.end = CH_UART0_RX,
.flags = IORESOURCE_DMA,
},
};
unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
}; };
static struct platform_device bfin_uart_device = { static struct platform_device bfin_uart0_device = {
.name = "bfin-uart", .name = "bfin-uart",
.id = 1, .id = 0,
.num_resources = ARRAY_SIZE(bfin_uart_resources), .num_resources = ARRAY_SIZE(bfin_uart0_resources),
.resource = bfin_uart_resources, .resource = bfin_uart0_resources,
.dev = {
.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
},
}; };
#endif #endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0 #ifdef CONFIG_BFIN_SIR0
...@@ -432,7 +461,9 @@ static struct platform_device *cm_bf533_devices[] __initdata = { ...@@ -432,7 +461,9 @@ static struct platform_device *cm_bf533_devices[] __initdata = {
&bfin_dpmc, &bfin_dpmc,
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device, #ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif #endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
......
arch/blackfin/mach-bf533/boards/ezkit.c
View file @ 6bd1fbea
...@@ -320,21 +320,50 @@ static struct platform_device bfin_spi0_device = { ...@@ -320,21 +320,50 @@ static struct platform_device bfin_spi0_device = {
#endif /* spi master and devices */ #endif /* spi master and devices */
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = { #ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{ {
.start = 0xFFC00400, .start = BFIN_UART_THR,
.end = 0xFFC004FF, .end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX + 1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_ERROR,
.end = IRQ_UART0_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART0_TX,
.end = CH_UART0_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART0_RX,
.end = CH_UART0_RX,
.flags = IORESOURCE_DMA,
},
};
unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
}; };
static struct platform_device bfin_uart_device = { static struct platform_device bfin_uart0_device = {
.name = "bfin-uart", .name = "bfin-uart",
.id = 1, .id = 0,
.num_resources = ARRAY_SIZE(bfin_uart_resources), .num_resources = ARRAY_SIZE(bfin_uart0_resources),
.resource = bfin_uart_resources, .resource = bfin_uart0_resources,
.dev = {
.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
},
}; };
#endif #endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0 #ifdef CONFIG_BFIN_SIR0
...@@ -471,7 +500,9 @@ static struct platform_device *ezkit_devices[] __initdata = { ...@@ -471,7 +500,9 @@ static struct platform_device *ezkit_devices[] __initdata = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device, #ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif #endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
......
arch/blackfin/mach-bf533/boards/ip0x.c
View file @ 6bd1fbea
...@@ -19,6 +19,7 @@ ...@@ -19,6 +19,7 @@
#include <linux/usb/isp1362.h> #include <linux/usb/isp1362.h>
#endif #endif
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h> #include <asm/bfin5xx_spi.h>
#include <asm/portmux.h> #include <asm/portmux.h>
...@@ -143,21 +144,50 @@ static struct platform_device spi_bfin_master_device = { ...@@ -143,21 +144,50 @@ static struct platform_device spi_bfin_master_device = {
#endif /* spi master and devices */ #endif /* spi master and devices */
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = { #ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{ {
.start = 0xFFC00400, .start = BFIN_UART_THR,
.end = 0xFFC004FF, .end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX + 1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_ERROR,
.end = IRQ_UART0_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART0_TX,
.end = CH_UART0_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART0_RX,
.end = CH_UART0_RX,
.flags = IORESOURCE_DMA,
},
};
unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
}; };
static struct platform_device bfin_uart_device = { static struct platform_device bfin_uart0_device = {
.name = "bfin-uart", .name = "bfin-uart",
.id = 1, .id = 0,
.num_resources = ARRAY_SIZE(bfin_uart_resources), .num_resources = ARRAY_SIZE(bfin_uart0_resources),
.resource = bfin_uart_resources, .resource = bfin_uart0_resources,
.dev = {
.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
},
}; };
#endif #endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0 #ifdef CONFIG_BFIN_SIR0
...@@ -241,7 +271,9 @@ static struct platform_device *ip0x_devices[] __initdata = { ...@@ -241,7 +271,9 @@ static struct platform_device *ip0x_devices[] __initdata = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device, #ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif #endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
......
arch/blackfin/mach-bf533/boards/stamp.c
View file @ 6bd1fbea
...@@ -322,21 +322,50 @@ static struct platform_device bfin_spi0_device = { ...@@ -322,21 +322,50 @@ static struct platform_device bfin_spi0_device = {
#endif /* spi master and devices */ #endif /* spi master and devices */
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = { #ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{ {
.start = 0xFFC00400, .start = BFIN_UART_THR,
.end = 0xFFC004FF, .end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX + 1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_ERROR,
.end = IRQ_UART0_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART0_TX,
.end = CH_UART0_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART0_RX,
.end = CH_UART0_RX,
.flags = IORESOURCE_DMA,
},
};
unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
}; };
static struct platform_device bfin_uart_device = { static struct platform_device bfin_uart0_device = {
.name = "bfin-uart", .name = "bfin-uart",
.id = 1, .id = 0,
.num_resources = ARRAY_SIZE(bfin_uart_resources), .num_resources = ARRAY_SIZE(bfin_uart0_resources),
.resource = bfin_uart_resources, .resource = bfin_uart0_resources,
.dev = {
.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
},
}; };
#endif #endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0 #ifdef CONFIG_BFIN_SIR0
...@@ -495,7 +524,9 @@ static struct platform_device *stamp_devices[] __initdata = { ...@@ -495,7 +524,9 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device, #ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif #endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
......
arch/blackfin/mach-bf537/boards/cm_bf537e.c
View file @ 6bd1fbea
...@@ -329,8 +329,8 @@ static struct platform_device cm_flash_device = { ...@@ -329,8 +329,8 @@ static struct platform_device cm_flash_device = {
#ifdef CONFIG_SERIAL_BFIN_UART0 #ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = { static struct resource bfin_uart0_resources[] = {
{ {
.start = 0xFFC00400, .start = UART0_THR,
.end = 0xFFC004FF, .end = UART0_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{ {
...@@ -373,18 +373,25 @@ static struct resource bfin_uart0_resources[] = { ...@@ -373,18 +373,25 @@ static struct resource bfin_uart0_resources[] = {
#endif #endif
}; };
unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
};
static struct platform_device bfin_uart0_device = { static struct platform_device bfin_uart0_device = {
.name = "bfin-uart", .name = "bfin-uart",
.id = 0, .id = 0,
.num_resources = ARRAY_SIZE(bfin_uart0_resources), .num_resources = ARRAY_SIZE(bfin_uart0_resources),
.resource = bfin_uart0_resources, .resource = bfin_uart0_resources,
.dev = {
.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
},
}; };
#endif #endif
#ifdef CONFIG_SERIAL_BFIN_UART1 #ifdef CONFIG_SERIAL_BFIN_UART1
static struct resource bfin_uart1_resources[] = { static struct resource bfin_uart1_resources[] = {
{ {
.start = 0xFFC02000, .start = UART1_THR,
.end = 0xFFC020FF, .end = UART1_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{ {
...@@ -427,11 +434,18 @@ static struct resource bfin_uart1_resources[] = { ...@@ -427,11 +434,18 @@ static struct resource bfin_uart1_resources[] = {
#endif #endif
}; };
unsigned short bfin_uart1_peripherals[] = {
P_UART1_TX, P_UART1_RX, 0
};
static struct platform_device bfin_uart1_device = { static struct platform_device bfin_uart1_device = {
.name = "bfin-uart", .name = "bfin-uart",
.id = 1, .id = 1,
.num_resources = ARRAY_SIZE(bfin_uart1_resources), .num_resources = ARRAY_SIZE(bfin_uart1_resources),
.resource = bfin_uart1_resources, .resource = bfin_uart1_resources,
.dev = {
.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
},
}; };
#endif #endif
#endif #endif
......
arch/blackfin/mach-bf537/boards/cm_bf537u.c
View file @ 6bd1fbea
...@@ -327,25 +327,93 @@ static struct platform_device cm_flash_device = { ...@@ -327,25 +327,93 @@ static struct platform_device cm_flash_device = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = { #ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{ {
.start = 0xFFC00400, .start = UART0_THR,
.end = 0xFFC004FF, .end = UART0_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, { },
.start = 0xFFC02000, {
.end = 0xFFC020FF, .start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_ERROR,
.end = IRQ_UART0_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART0_TX,
.end = CH_UART0_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART0_RX,
.end = CH_UART0_RX,
.flags = IORESOURCE_DMA,
},
};
unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
};
static struct platform_device bfin_uart0_device = {
.name = "bfin-uart",
.id = 0,
.num_resources = ARRAY_SIZE(bfin_uart0_resources),
.resource = bfin_uart0_resources,
.dev = {
.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
},
};
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
static struct resource bfin_uart1_resources[] = {
{
.start = UART1_THR,
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_ERROR,
.end = IRQ_UART1_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART1_TX,
.end = CH_UART1_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART1_RX,
.end = CH_UART1_RX,
.flags = IORESOURCE_DMA,
},
}; };
static struct platform_device bfin_uart_device = { unsigned short bfin_uart1_peripherals[] = {
P_UART1_TX, P_UART1_RX, 0
};
static struct platform_device bfin_uart1_device = {
.name = "bfin-uart", .name = "bfin-uart",
.id = 1, .id = 1,
.num_resources = ARRAY_SIZE(bfin_uart_resources), .num_resources = ARRAY_SIZE(bfin_uart1_resources),
.resource = bfin_uart_resources, .resource = bfin_uart1_resources,
.dev = {
.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
},
}; };
#endif #endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0 #ifdef CONFIG_BFIN_SIR0
...@@ -522,7 +590,12 @@ static struct platform_device *cm_bf537u_devices[] __initdata = { ...@@ -522,7 +590,12 @@ static struct platform_device *cm_bf537u_devices[] __initdata = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device, #ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
&bfin_uart1_device,
#endif
#endif #endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
......
arch/blackfin/mach-bf537/boards/minotaur.c
View file @ 6bd1fbea
...@@ -211,25 +211,93 @@ static struct platform_device bfin_spi0_device = { ...@@ -211,25 +211,93 @@ static struct platform_device bfin_spi0_device = {
#endif /* spi master and devices */ #endif /* spi master and devices */
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = { #ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{ {
.start = 0xFFC00400, .start = UART0_THR,
.end = 0xFFC004FF, .end = UART0_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, { },
.start = 0xFFC02000, {
.end = 0xFFC020FF, .start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_ERROR,
.end = IRQ_UART0_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART0_TX,
.end = CH_UART0_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART0_RX,
.end = CH_UART0_RX,
.flags = IORESOURCE_DMA,
},
};
unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
};
static struct platform_device bfin_uart0_device = {
.name = "bfin-uart",
.id = 0,
.num_resources = ARRAY_SIZE(bfin_uart0_resources),
.resource = bfin_uart0_resources,
.dev = {
.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
},
};
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
static struct resource bfin_uart1_resources[] = {
{
.start = UART1_THR,
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_ERROR,
.end = IRQ_UART1_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART1_TX,
.end = CH_UART1_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART1_RX,
.end = CH_UART1_RX,
.flags = IORESOURCE_DMA,
},
}; };
static struct platform_device bfin_uart_device = { unsigned short bfin_uart1_peripherals[] = {
P_UART1_TX, P_UART1_RX, 0
};
static struct platform_device bfin_uart1_device = {
.name = "bfin-uart", .name = "bfin-uart",
.id = 1, .id = 1,
.num_resources = ARRAY_SIZE(bfin_uart_resources), .num_resources = ARRAY_SIZE(bfin_uart1_resources),
.resource = bfin_uart_resources, .resource = bfin_uart1_resources,
.dev = {
.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
},
}; };
#endif #endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0 #ifdef CONFIG_BFIN_SIR0
...@@ -343,7 +411,12 @@ static struct platform_device *minotaur_devices[] __initdata = { ...@@ -343,7 +411,12 @@ static struct platform_device *minotaur_devices[] __initdata = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device, #ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
&bfin_uart1_device,
#endif
#endif #endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
......
arch/blackfin/mach-bf537/boards/pnav10.c
View file @ 6bd1fbea
...@@ -362,25 +362,93 @@ static struct platform_device bfin_fb_device = { ...@@ -362,25 +362,93 @@ static struct platform_device bfin_fb_device = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = { #ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{ {
.start = 0xFFC00400, .start = UART0_THR,
.end = 0xFFC004FF, .end = UART0_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, { },
.start = 0xFFC02000, {
.end = 0xFFC020FF, .start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_ERROR,
.end = IRQ_UART0_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART0_TX,
.end = CH_UART0_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART0_RX,
.end = CH_UART0_RX,
.flags = IORESOURCE_DMA,
},
};
unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
};
static struct platform_device bfin_uart0_device = {
.name = "bfin-uart",
.id = 0,
.num_resources = ARRAY_SIZE(bfin_uart0_resources),
.resource = bfin_uart0_resources,
.dev = {
.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
},
};
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
static struct resource bfin_uart1_resources[] = {
{
.start = UART1_THR,
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_ERROR,
.end = IRQ_UART1_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART1_TX,
.end = CH_UART1_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART1_RX,
.end = CH_UART1_RX,
.flags = IORESOURCE_DMA,
},
}; };
static struct platform_device bfin_uart_device = { unsigned short bfin_uart1_peripherals[] = {
P_UART1_TX, P_UART1_RX, 0
};
static struct platform_device bfin_uart1_device = {
.name = "bfin-uart", .name = "bfin-uart",
.id = 1, .id = 1,
.num_resources = ARRAY_SIZE(bfin_uart_resources), .num_resources = ARRAY_SIZE(bfin_uart1_resources),
.resource = bfin_uart_resources, .resource = bfin_uart1_resources,
.dev = {
.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
},
}; };
#endif #endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0 #ifdef CONFIG_BFIN_SIR0
...@@ -472,7 +540,12 @@ static struct platform_device *stamp_devices[] __initdata = { ...@@ -472,7 +540,12 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device, #ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
&bfin_uart1_device,
#endif
#endif #endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
......
arch/blackfin/mach-bf537/boards/stamp.c
View file @ 6bd1fbea
...@@ -1157,30 +1157,105 @@ static struct platform_device bfin_lq035q1_device = { ...@@ -1157,30 +1157,105 @@ static struct platform_device bfin_lq035q1_device = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
#ifdef CONFIG_SERIAL_BFIN_UART0 #ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{ {
.start = 0xFFC00400, .start = UART0_THR,
.end = 0xFFC004FF, .end = UART0_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_ERROR,
.end = IRQ_UART0_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART0_TX,
.end = CH_UART0_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART0_RX,
.end = CH_UART0_RX,
.flags = IORESOURCE_DMA,
},
#ifdef CONFIG_BFIN_UART0_CTSRTS
{ /* CTS pin */
.start = GPIO_PG7,
.end = GPIO_PG7,
.flags = IORESOURCE_IO,
},
{ /* RTS pin */
.start = GPIO_PG6,
.end = GPIO_PG6,
.flags = IORESOURCE_IO,
},
#endif
};
unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
};
static struct platform_device bfin_uart0_device = {
.name = "bfin-uart",
.id = 0,
.num_resources = ARRAY_SIZE(bfin_uart0_resources),
.resource = bfin_uart0_resources,
.dev = {
.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
},
};
#endif #endif
#ifdef CONFIG_SERIAL_BFIN_UART1 #ifdef CONFIG_SERIAL_BFIN_UART1
static struct resource bfin_uart1_resources[] = {
{ {
.start = 0xFFC02000, .start = UART1_THR,
.end = 0xFFC020FF, .end = UART1_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
#endif {
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_ERROR,
.end = IRQ_UART1_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART1_TX,
.end = CH_UART1_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART1_RX,
.end = CH_UART1_RX,
.flags = IORESOURCE_DMA,
},
};
unsigned short bfin_uart1_peripherals[] = {
P_UART1_TX, P_UART1_RX, 0
}; };
static struct platform_device bfin_uart_device = { static struct platform_device bfin_uart1_device = {
.name = "bfin-uart", .name = "bfin-uart",
.id = 1, .id = 1,
.num_resources = ARRAY_SIZE(bfin_uart_resources), .num_resources = ARRAY_SIZE(bfin_uart1_resources),
.resource = bfin_uart_resources, .resource = bfin_uart1_resources,
.dev = {
.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
},
}; };
#endif #endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0 #ifdef CONFIG_BFIN_SIR0
...@@ -1771,7 +1846,12 @@ static struct platform_device *stamp_devices[] __initdata = { ...@@ -1771,7 +1846,12 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device, #ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
&bfin_uart1_device,
#endif
#endif #endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
......
arch/blackfin/mach-bf537/boards/tcm_bf537.c
View file @ 6bd1fbea
...@@ -327,25 +327,93 @@ static struct platform_device cm_flash_device = { ...@@ -327,25 +327,93 @@ static struct platform_device cm_flash_device = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = { #ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{ {
.start = 0xFFC00400, .start = UART0_THR,
.end = 0xFFC004FF, .end = UART0_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, { },
.start = 0xFFC02000, {
.end = 0xFFC020FF, .start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_ERROR,
.end = IRQ_UART0_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART0_TX,
.end = CH_UART0_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART0_RX,
.end = CH_UART0_RX,
.flags = IORESOURCE_DMA,
},
};
unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
};
static struct platform_device bfin_uart0_device = {
.name = "bfin-uart",
.id = 0,
.num_resources = ARRAY_SIZE(bfin_uart0_resources),
.resource = bfin_uart0_resources,
.dev = {
.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
},
};
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
static struct resource bfin_uart1_resources[] = {
{
.start = UART1_THR,
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_ERROR,
.end = IRQ_UART1_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART1_TX,
.end = CH_UART1_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART1_RX,
.end = CH_UART1_RX,
.flags = IORESOURCE_DMA,
},
}; };
static struct platform_device bfin_uart_device = { unsigned short bfin_uart1_peripherals[] = {
P_UART1_TX, P_UART1_RX, 0
};
static struct platform_device bfin_uart1_device = {
.name = "bfin-uart", .name = "bfin-uart",
.id = 1, .id = 1,
.num_resources = ARRAY_SIZE(bfin_uart_resources), .num_resources = ARRAY_SIZE(bfin_uart1_resources),
.resource = bfin_uart_resources, .resource = bfin_uart1_resources,
.dev = {
.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
},
}; };
#endif #endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0 #ifdef CONFIG_BFIN_SIR0
...@@ -524,7 +592,12 @@ static struct platform_device *cm_bf537_devices[] __initdata = { ...@@ -524,7 +592,12 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device, #ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
&bfin_uart1_device,
#endif
#endif #endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
......
arch/blackfin/mach-bf538/boards/ezkit.c
View file @ 6bd1fbea
...@@ -41,37 +41,148 @@ static struct platform_device rtc_device = { ...@@ -41,37 +41,148 @@ static struct platform_device rtc_device = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
#ifdef CONFIG_SERIAL_BFIN_UART0 #ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{ {
.start = 0xFFC00400, .start = UART0_THR,
.end = 0xFFC004FF, .end = UART0_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_ERROR,
.end = IRQ_UART0_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART0_TX,
.end = CH_UART0_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART0_RX,
.end = CH_UART0_RX,
.flags = IORESOURCE_DMA,
},
#ifdef CONFIG_BFIN_UART0_CTSRTS
{ /* CTS pin */
.start = GPIO_PG7,
.end = GPIO_PG7,
.flags = IORESOURCE_IO,
},
{ /* RTS pin */
.start = GPIO_PG6,
.end = GPIO_PG6,
.flags = IORESOURCE_IO,
},
#endif
};
unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
};
static struct platform_device bfin_uart0_device = {
.name = "bfin-uart",
.id = 0,
.num_resources = ARRAY_SIZE(bfin_uart0_resources),
.resource = bfin_uart0_resources,
.dev = {
.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
},
};
#endif #endif
#ifdef CONFIG_SERIAL_BFIN_UART1 #ifdef CONFIG_SERIAL_BFIN_UART1
static struct resource bfin_uart1_resources[] = {
{ {
.start = 0xFFC02000, .start = UART1_THR,
.end = 0xFFC020FF, .end = UART1_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_ERROR,
.end = IRQ_UART1_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART1_TX,
.end = CH_UART1_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART1_RX,
.end = CH_UART1_RX,
.flags = IORESOURCE_DMA,
},
};
unsigned short bfin_uart1_peripherals[] = {
P_UART1_TX, P_UART1_RX, 0
};
static struct platform_device bfin_uart1_device = {
.name = "bfin-uart",
.id = 1,
.num_resources = ARRAY_SIZE(bfin_uart1_resources),
.resource = bfin_uart1_resources,
.dev = {
.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
},
};
#endif #endif
#ifdef CONFIG_SERIAL_BFIN_UART2 #ifdef CONFIG_SERIAL_BFIN_UART2
static struct resource bfin_uart2_resources[] = {
{ {
.start = 0xFFC02100, .start = UART2_THR,
.end = 0xFFC021FF, .end = UART2_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
#endif {
.start = IRQ_UART2_RX,
.end = IRQ_UART2_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART2_ERROR,
.end = IRQ_UART2_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART2_TX,
.end = CH_UART2_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART2_RX,
.end = CH_UART2_RX,
.flags = IORESOURCE_DMA,
},
}; };
static struct platform_device bfin_uart_device = { unsigned short bfin_uart2_peripherals[] = {
P_UART2_TX, P_UART2_RX, 0
};
static struct platform_device bfin_uart2_device = {
.name = "bfin-uart", .name = "bfin-uart",
.id = 1, .id = 2,
.num_resources = ARRAY_SIZE(bfin_uart_resources), .num_resources = ARRAY_SIZE(bfin_uart2_resources),
.resource = bfin_uart_resources, .resource = bfin_uart2_resources,
.dev = {
.platform_data = &bfin_uart2_peripherals, /* Passed to driver */
},
}; };
#endif #endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0 #ifdef CONFIG_BFIN_SIR0
...@@ -622,7 +733,15 @@ static struct platform_device *cm_bf538_devices[] __initdata = { ...@@ -622,7 +733,15 @@ static struct platform_device *cm_bf538_devices[] __initdata = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device, #ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
&bfin_uart1_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_UART2
&bfin_uart2_device,
#endif
#endif #endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
......
arch/blackfin/mach-bf548/boards/cm_bf548.c
View file @ 6bd1fbea
...@@ -127,44 +127,211 @@ static struct platform_device rtc_device = { ...@@ -127,44 +127,211 @@ static struct platform_device rtc_device = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
#ifdef CONFIG_SERIAL_BFIN_UART0 #ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{ {
.start = 0xFFC00400, .start = UART0_DLL,
.end = 0xFFC004FF, .end = UART0_RBR+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_ERROR,
.end = IRQ_UART0_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART0_TX,
.end = CH_UART0_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART0_RX,
.end = CH_UART0_RX,
.flags = IORESOURCE_DMA,
},
};
unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
};
static struct platform_device bfin_uart0_device = {
.name = "bfin-uart",
.id = 0,
.num_resources = ARRAY_SIZE(bfin_uart0_resources),
.resource = bfin_uart0_resources,
.dev = {
.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
},
};
#endif #endif
#ifdef CONFIG_SERIAL_BFIN_UART1 #ifdef CONFIG_SERIAL_BFIN_UART1
static struct resource bfin_uart1_resources[] = {
{ {
.start = 0xFFC02000, .start = UART1_DLL,
.end = 0xFFC020FF, .end = UART1_RBR+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_ERROR,
.end = IRQ_UART1_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART1_TX,
.end = CH_UART1_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART1_RX,
.end = CH_UART1_RX,
.flags = IORESOURCE_DMA,
},
#ifdef CONFIG_BFIN_UART1_CTSRTS
{ /* CTS pin -- 0 means not supported */
.start = GPIO_PE10,
.end = GPIO_PE10,
.flags = IORESOURCE_IO,
},
{ /* RTS pin -- 0 means not supported */
.start = GPIO_PE9,
.end = GPIO_PE9,
.flags = IORESOURCE_IO,
},
#endif
};
unsigned short bfin_uart1_peripherals[] = {
P_UART1_TX, P_UART1_RX,
#ifdef CONFIG_BFIN_UART1_CTSRTS
P_UART1_RTS, P_UART1_CTS,
#endif
0
};
static struct platform_device bfin_uart1_device = {
.name = "bfin-uart",
.id = 1,
.num_resources = ARRAY_SIZE(bfin_uart1_resources),
.resource = bfin_uart1_resources,
.dev = {
.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
},
};
#endif #endif
#ifdef CONFIG_SERIAL_BFIN_UART2 #ifdef CONFIG_SERIAL_BFIN_UART2
static struct resource bfin_uart2_resources[] = {
{ {
.start = 0xFFC02100, .start = UART2_DLL,
.end = 0xFFC021FF, .end = UART2_RBR+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART2_RX,
.end = IRQ_UART2_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART2_ERROR,
.end = IRQ_UART2_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART2_TX,
.end = CH_UART2_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART2_RX,
.end = CH_UART2_RX,
.flags = IORESOURCE_DMA,
},
};
unsigned short bfin_uart2_peripherals[] = {
P_UART2_TX, P_UART2_RX, 0
};
static struct platform_device bfin_uart2_device = {
.name = "bfin-uart",
.id = 2,
.num_resources = ARRAY_SIZE(bfin_uart2_resources),
.resource = bfin_uart2_resources,
.dev = {
.platform_data = &bfin_uart2_peripherals, /* Passed to driver */
},
};
#endif #endif
#ifdef CONFIG_SERIAL_BFIN_UART3 #ifdef CONFIG_SERIAL_BFIN_UART3
static struct resource bfin_uart3_resources[] = {
{ {
.start = 0xFFC03100, .start = UART3_DLL,
.end = 0xFFC031FF, .end = UART3_RBR+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART3_RX,
.end = IRQ_UART3_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART3_ERROR,
.end = IRQ_UART3_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART3_TX,
.end = CH_UART3_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART3_RX,
.end = CH_UART3_RX,
.flags = IORESOURCE_DMA,
},
#ifdef CONFIG_BFIN_UART3_CTSRTS
{ /* CTS pin -- 0 means not supported */
.start = GPIO_PB3,
.end = GPIO_PB3,
.flags = IORESOURCE_IO,
},
{ /* RTS pin -- 0 means not supported */
.start = GPIO_PB2,
.end = GPIO_PB2,
.flags = IORESOURCE_IO,
},
#endif #endif
}; };
static struct platform_device bfin_uart_device = { unsigned short bfin_uart3_peripherals[] = {
P_UART3_TX, P_UART3_RX,
#ifdef CONFIG_BFIN_UART3_CTSRTS
P_UART3_RTS, P_UART3_CTS,
#endif
0
};
static struct platform_device bfin_uart3_device = {
.name = "bfin-uart", .name = "bfin-uart",
.id = 1, .id = 3,
.num_resources = ARRAY_SIZE(bfin_uart_resources), .num_resources = ARRAY_SIZE(bfin_uart3_resources),
.resource = bfin_uart_resources, .resource = bfin_uart3_resources,
.dev = {
.platform_data = &bfin_uart3_peripherals, /* Passed to driver */
},
}; };
#endif #endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0 #ifdef CONFIG_BFIN_SIR0
...@@ -752,7 +919,18 @@ static struct platform_device *cm_bf548_devices[] __initdata = { ...@@ -752,7 +919,18 @@ static struct platform_device *cm_bf548_devices[] __initdata = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device, #ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
&bfin_uart1_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_UART2
&bfin_uart2_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_UART3
&bfin_uart3_device,
#endif
#endif #endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
......
arch/blackfin/mach-bf548/boards/ezkit.c
View file @ 6bd1fbea
...@@ -232,44 +232,211 @@ static struct platform_device rtc_device = { ...@@ -232,44 +232,211 @@ static struct platform_device rtc_device = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
#ifdef CONFIG_SERIAL_BFIN_UART0 #ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{ {
.start = 0xFFC00400, .start = UART0_DLL,
.end = 0xFFC004FF, .end = UART0_RBR+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_ERROR,
.end = IRQ_UART0_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART0_TX,
.end = CH_UART0_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART0_RX,
.end = CH_UART0_RX,
.flags = IORESOURCE_DMA,
},
};
unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
};
static struct platform_device bfin_uart0_device = {
.name = "bfin-uart",
.id = 0,
.num_resources = ARRAY_SIZE(bfin_uart0_resources),
.resource = bfin_uart0_resources,
.dev = {
.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
},
};
#endif #endif
#ifdef CONFIG_SERIAL_BFIN_UART1 #ifdef CONFIG_SERIAL_BFIN_UART1
static struct resource bfin_uart1_resources[] = {
{ {
.start = 0xFFC02000, .start = UART1_DLL,
.end = 0xFFC020FF, .end = UART1_RBR+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_ERROR,
.end = IRQ_UART1_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART1_TX,
.end = CH_UART1_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART1_RX,
.end = CH_UART1_RX,
.flags = IORESOURCE_DMA,
},
#ifdef CONFIG_BFIN_UART1_CTSRTS
{ /* CTS pin -- 0 means not supported */
.start = GPIO_PE10,
.end = GPIO_PE10,
.flags = IORESOURCE_IO,
},
{ /* RTS pin -- 0 means not supported */
.start = GPIO_PE9,
.end = GPIO_PE9,
.flags = IORESOURCE_IO,
},
#endif
};
unsigned short bfin_uart1_peripherals[] = {
P_UART1_TX, P_UART1_RX,
#ifdef CONFIG_BFIN_UART1_CTSRTS
P_UART1_RTS, P_UART1_CTS,
#endif
0
};
static struct platform_device bfin_uart1_device = {
.name = "bfin-uart",
.id = 1,
.num_resources = ARRAY_SIZE(bfin_uart1_resources),
.resource = bfin_uart1_resources,
.dev = {
.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
},
};
#endif #endif
#ifdef CONFIG_SERIAL_BFIN_UART2 #ifdef CONFIG_SERIAL_BFIN_UART2
static struct resource bfin_uart2_resources[] = {
{ {
.start = 0xFFC02100, .start = UART2_DLL,
.end = 0xFFC021FF, .end = UART2_RBR+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART2_RX,
.end = IRQ_UART2_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART2_ERROR,
.end = IRQ_UART2_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART2_TX,
.end = CH_UART2_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART2_RX,
.end = CH_UART2_RX,
.flags = IORESOURCE_DMA,
},
};
unsigned short bfin_uart2_peripherals[] = {
P_UART2_TX, P_UART2_RX, 0
};
static struct platform_device bfin_uart2_device = {
.name = "bfin-uart",
.id = 2,
.num_resources = ARRAY_SIZE(bfin_uart2_resources),
.resource = bfin_uart2_resources,
.dev = {
.platform_data = &bfin_uart2_peripherals, /* Passed to driver */
},
};
#endif #endif
#ifdef CONFIG_SERIAL_BFIN_UART3 #ifdef CONFIG_SERIAL_BFIN_UART3
static struct resource bfin_uart3_resources[] = {
{ {
.start = 0xFFC03100, .start = UART3_DLL,
.end = 0xFFC031FF, .end = UART3_RBR+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART3_RX,
.end = IRQ_UART3_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART3_ERROR,
.end = IRQ_UART3_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART3_TX,
.end = CH_UART3_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART3_RX,
.end = CH_UART3_RX,
.flags = IORESOURCE_DMA,
},
#ifdef CONFIG_BFIN_UART3_CTSRTS
{ /* CTS pin -- 0 means not supported */
.start = GPIO_PB3,
.end = GPIO_PB3,
.flags = IORESOURCE_IO,
},
{ /* RTS pin -- 0 means not supported */
.start = GPIO_PB2,
.end = GPIO_PB2,
.flags = IORESOURCE_IO,
},
#endif #endif
}; };
static struct platform_device bfin_uart_device = { unsigned short bfin_uart3_peripherals[] = {
P_UART3_TX, P_UART3_RX,
#ifdef CONFIG_BFIN_UART3_CTSRTS
P_UART3_RTS, P_UART3_CTS,
#endif
0
};
static struct platform_device bfin_uart3_device = {
.name = "bfin-uart", .name = "bfin-uart",
.id = 1, .id = 3,
.num_resources = ARRAY_SIZE(bfin_uart_resources), .num_resources = ARRAY_SIZE(bfin_uart3_resources),
.resource = bfin_uart_resources, .resource = bfin_uart3_resources,
.dev = {
.platform_data = &bfin_uart3_peripherals, /* Passed to driver */
},
}; };
#endif #endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0 #ifdef CONFIG_BFIN_SIR0
...@@ -960,7 +1127,18 @@ static struct platform_device *ezkit_devices[] __initdata = { ...@@ -960,7 +1127,18 @@ static struct platform_device *ezkit_devices[] __initdata = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device, #ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
&bfin_uart1_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_UART2
&bfin_uart2_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_UART3
&bfin_uart3_device,
#endif
#endif #endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
......
arch/blackfin/mach-bf561/boards/cm_bf561.c
View file @ 6bd1fbea
...@@ -305,21 +305,50 @@ static struct platform_device isp1362_hcd_device = { ...@@ -305,21 +305,50 @@ static struct platform_device isp1362_hcd_device = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = { #ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{ {
.start = 0xFFC00400, .start = BFIN_UART_THR,
.end = 0xFFC004FF, .end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART_RX,
.end = IRQ_UART_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART_ERROR,
.end = IRQ_UART_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART_TX,
.end = CH_UART_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART_RX,
.end = CH_UART_RX,
.flags = IORESOURCE_DMA,
},
};
unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
}; };
static struct platform_device bfin_uart_device = { static struct platform_device bfin_uart0_device = {
.name = "bfin-uart", .name = "bfin-uart",
.id = 1, .id = 0,
.num_resources = ARRAY_SIZE(bfin_uart_resources), .num_resources = ARRAY_SIZE(bfin_uart0_resources),
.resource = bfin_uart_resources, .resource = bfin_uart0_resources,
.dev = {
.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
},
}; };
#endif #endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0 #ifdef CONFIG_BFIN_SIR0
...@@ -463,7 +492,9 @@ static struct platform_device *cm_bf561_devices[] __initdata = { ...@@ -463,7 +492,9 @@ static struct platform_device *cm_bf561_devices[] __initdata = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device, #ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif #endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
......
arch/blackfin/mach-bf561/boards/ezkit.c
View file @ 6bd1fbea
...@@ -160,21 +160,50 @@ static struct platform_device smc91x_device = { ...@@ -160,21 +160,50 @@ static struct platform_device smc91x_device = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = { #ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{ {
.start = 0xFFC00400, .start = BFIN_UART_THR,
.end = 0xFFC004FF, .end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{
.start = IRQ_UART_RX,
.end = IRQ_UART_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART_ERROR,
.end = IRQ_UART_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART_TX,
.end = CH_UART_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART_RX,
.end = CH_UART_RX,
.flags = IORESOURCE_DMA,
},
};
unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
}; };
static struct platform_device bfin_uart_device = { static struct platform_device bfin_uart0_device = {
.name = "bfin-uart", .name = "bfin-uart",
.id = 1, .id = 0,
.num_resources = ARRAY_SIZE(bfin_uart_resources), .num_resources = ARRAY_SIZE(bfin_uart0_resources),
.resource = bfin_uart_resources, .resource = bfin_uart0_resources,
.dev = {
.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
},
}; };
#endif #endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0 #ifdef CONFIG_BFIN_SIR0
...@@ -412,7 +441,9 @@ static struct platform_device *ezkit_devices[] __initdata = { ...@@ -412,7 +441,9 @@ static struct platform_device *ezkit_devices[] __initdata = {
#endif #endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device, #ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif #endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
......
arch/blackfin/mach-bf561/boards/tepla.c
View file @ 6bd1fbea
...@@ -42,6 +42,52 @@ static struct platform_device smc91x_device = { ...@@ -42,6 +42,52 @@ static struct platform_device smc91x_device = {
.resource = smc91x_resources, .resource = smc91x_resources,
}; };
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
.start = BFIN_UART_THR,
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART_RX,
.end = IRQ_UART_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART_ERROR,
.end = IRQ_UART_ERROR,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART_TX,
.end = CH_UART_TX,
.flags = IORESOURCE_DMA,
},
{
.start = CH_UART_RX,
.end = CH_UART_RX,
.flags = IORESOURCE_DMA,
},
};
unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
};
static struct platform_device bfin_uart0_device = {
.name = "bfin-uart",
.id = 0,
.num_resources = ARRAY_SIZE(bfin_uart0_resources),
.resource = bfin_uart0_resources,
.dev = {
.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
},
};
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0 #ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = { static struct resource bfin_sir0_resources[] = {
...@@ -73,6 +119,13 @@ static struct platform_device bfin_sir0_device = { ...@@ -73,6 +119,13 @@ static struct platform_device bfin_sir0_device = {
static struct platform_device *tepla_devices[] __initdata = { static struct platform_device *tepla_devices[] __initdata = {
&smc91x_device, &smc91x_device,
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0 #ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device, &bfin_sir0_device,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7