Commit 6c6c0b2c authored by Mark Weaver's avatar Mark Weaver Committed by Linus Torvalds

[PATCH] v4l: (939) Support for nebula rc5 based gpio remote

Support for Nebula rc5-based gpio remote.
Signed-off-by: default avatarMark Weaver <mark-clist@npsl.co.uk>
Signed-off-by: default avatarNickolay V. Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 871242b9
...@@ -2133,7 +2133,10 @@ struct tvcard bttv_tvcards[] = { ...@@ -2133,7 +2133,10 @@ struct tvcard bttv_tvcards[] = {
.tuner_addr = ADDR_UNSET, .tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET,
.has_dvb = 1, .has_dvb = 1,
.has_remote = 1,
.gpiomask = 0x1b,
.no_gpioirq = 1, .no_gpioirq = 1,
.any_irq = 1,
}, },
[BTTV_BOARD_PV143] = { [BTTV_BOARD_PV143] = {
/* Jorge Boncompte - DTI2 <jorge@dti2.net> */ /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
...@@ -3384,6 +3387,8 @@ void __devinit bttv_init_card2(struct bttv *btv) ...@@ -3384,6 +3387,8 @@ void __devinit bttv_init_card2(struct bttv *btv)
btv->has_remote=1; btv->has_remote=1;
if (!bttv_tvcards[btv->c.type].no_gpioirq) if (!bttv_tvcards[btv->c.type].no_gpioirq)
btv->gpioirq=1; btv->gpioirq=1;
if (bttv_tvcards[btv->c.type].any_irq)
btv->any_irq = 1;
if (bttv_tvcards[btv->c.type].audio_hook) if (bttv_tvcards[btv->c.type].audio_hook)
btv->audio_hook=bttv_tvcards[btv->c.type].audio_hook; btv->audio_hook=bttv_tvcards[btv->c.type].audio_hook;
......
...@@ -3667,6 +3667,10 @@ static irqreturn_t bttv_irq(int irq, void *dev_id, struct pt_regs * regs) ...@@ -3667,6 +3667,10 @@ static irqreturn_t bttv_irq(int irq, void *dev_id, struct pt_regs * regs)
int handled = 0; int handled = 0;
btv=(struct bttv *)dev_id; btv=(struct bttv *)dev_id;
if (btv->any_irq)
handled = bttv_any_irq(&btv->c);
count=0; count=0;
while (1) { while (1) {
/* get/clear interrupt status bits */ /* get/clear interrupt status bits */
......
...@@ -113,6 +113,24 @@ void bttv_gpio_irq(struct bttv_core *core) ...@@ -113,6 +113,24 @@ void bttv_gpio_irq(struct bttv_core *core)
} }
} }
int bttv_any_irq(struct bttv_core *core)
{
struct bttv_sub_driver *drv;
struct bttv_sub_device *dev;
struct list_head *item;
int handled = 0;
list_for_each(item,&core->subs) {
dev = list_entry(item,struct bttv_sub_device,list);
drv = to_bttv_sub_drv(dev->dev.driver);
if (drv && drv->any_irq) {
if (drv->any_irq(dev))
handled = 1;
}
}
return handled;
}
/* ----------------------------------------------------------------------- */ /* ----------------------------------------------------------------------- */
/* external: sub-driver register/unregister */ /* external: sub-driver register/unregister */
......
...@@ -235,6 +235,7 @@ struct tvcard ...@@ -235,6 +235,7 @@ struct tvcard
unsigned int has_dvb:1; unsigned int has_dvb:1;
unsigned int has_remote:1; unsigned int has_remote:1;
unsigned int no_gpioirq:1; unsigned int no_gpioirq:1;
unsigned int any_irq:1;
/* other settings */ /* other settings */
unsigned int pll; unsigned int pll;
...@@ -334,6 +335,7 @@ struct bttv_sub_driver { ...@@ -334,6 +335,7 @@ struct bttv_sub_driver {
struct device_driver drv; struct device_driver drv;
char wanted[BUS_ID_SIZE]; char wanted[BUS_ID_SIZE];
void (*gpio_irq)(struct bttv_sub_device *sub); void (*gpio_irq)(struct bttv_sub_device *sub);
int (*any_irq)(struct bttv_sub_device *sub);
}; };
#define to_bttv_sub_drv(x) container_of((x), struct bttv_sub_driver, drv) #define to_bttv_sub_drv(x) container_of((x), struct bttv_sub_driver, drv)
......
...@@ -208,6 +208,7 @@ extern struct bus_type bttv_sub_bus_type; ...@@ -208,6 +208,7 @@ extern struct bus_type bttv_sub_bus_type;
int bttv_sub_add_device(struct bttv_core *core, char *name); int bttv_sub_add_device(struct bttv_core *core, char *name);
int bttv_sub_del_devices(struct bttv_core *core); int bttv_sub_del_devices(struct bttv_core *core);
void bttv_gpio_irq(struct bttv_core *core); void bttv_gpio_irq(struct bttv_core *core);
int bttv_any_irq(struct bttv_core *core);
/* ---------------------------------------------------------- */ /* ---------------------------------------------------------- */
...@@ -273,6 +274,7 @@ struct bttv { ...@@ -273,6 +274,7 @@ struct bttv {
struct bttv_pll_info pll; struct bttv_pll_info pll;
int triton1; int triton1;
int gpioirq; int gpioirq;
int any_irq;
int use_i2c_hw; int use_i2c_hw;
/* old gpio interface */ /* old gpio interface */
......
...@@ -221,24 +221,99 @@ static IR_KEYTAB_TYPE ir_codes_conceptronic[IR_KEYTAB_SIZE] = { ...@@ -221,24 +221,99 @@ static IR_KEYTAB_TYPE ir_codes_conceptronic[IR_KEYTAB_SIZE] = {
[ 24 ] = KEY_MUTE // mute/unmute [ 24 ] = KEY_MUTE // mute/unmute
}; };
static IR_KEYTAB_TYPE ir_codes_nebula[IR_KEYTAB_SIZE] = {
[0x00] = KEY_KP0,
[0x01] = KEY_KP1,
[0x02] = KEY_KP2,
[0x03] = KEY_KP3,
[0x04] = KEY_KP4,
[0x05] = KEY_KP5,
[0x06] = KEY_KP6,
[0x07] = KEY_KP7,
[0x08] = KEY_KP8,
[0x09] = KEY_KP9,
[0x0a] = KEY_TV,
[0x0b] = KEY_AUX,
[0x0c] = KEY_DVD,
[0x0d] = KEY_POWER,
[0x0e] = KEY_MHP, /* labelled 'Picture' */
[0x0f] = KEY_AUDIO,
[0x10] = KEY_INFO,
[0x11] = KEY_F13, /* 16:9 */
[0x12] = KEY_F14, /* 14:9 */
[0x13] = KEY_EPG,
[0x14] = KEY_EXIT,
[0x15] = KEY_MENU,
[0x16] = KEY_UP,
[0x17] = KEY_DOWN,
[0x18] = KEY_LEFT,
[0x19] = KEY_RIGHT,
[0x1a] = KEY_ENTER,
[0x1b] = KEY_CHANNELUP,
[0x1c] = KEY_CHANNELDOWN,
[0x1d] = KEY_VOLUMEUP,
[0x1e] = KEY_VOLUMEDOWN,
[0x1f] = KEY_RED,
[0x20] = KEY_GREEN,
[0x21] = KEY_YELLOW,
[0x22] = KEY_BLUE,
[0x23] = KEY_SUBTITLE,
[0x24] = KEY_F15, /* AD */
[0x25] = KEY_TEXT,
[0x26] = KEY_MUTE,
[0x27] = KEY_REWIND,
[0x28] = KEY_STOP,
[0x29] = KEY_PLAY,
[0x2a] = KEY_FASTFORWARD,
[0x2b] = KEY_F16, /* chapter */
[0x2c] = KEY_PAUSE,
[0x2d] = KEY_PLAY,
[0x2e] = KEY_RECORD,
[0x2f] = KEY_F17, /* picture in picture */
[0x30] = KEY_KPPLUS, /* zoom in */
[0x31] = KEY_KPMINUS, /* zoom out */
[0x32] = KEY_F18, /* capture */
[0x33] = KEY_F19, /* web */
[0x34] = KEY_EMAIL,
[0x35] = KEY_PHONE,
[0x36] = KEY_PC
};
struct IR { struct IR {
struct bttv_sub_device *sub; struct bttv_sub_device *sub;
struct input_dev *input; struct input_dev *input;
struct ir_input_state ir; struct ir_input_state ir;
char name[32]; char name[32];
char phys[32]; char phys[32];
/* Usual gpio signalling */
u32 mask_keycode; u32 mask_keycode;
u32 mask_keydown; u32 mask_keydown;
u32 mask_keyup; u32 mask_keyup;
u32 polling;
int polling;
u32 last_gpio; u32 last_gpio;
struct work_struct work; struct work_struct work;
struct timer_list timer; struct timer_list timer;
/* RC5 gpio */
u32 rc5_gpio;
struct timer_list timer_end; /* timer_end for code completion */
struct timer_list timer_keyup; /* timer_end for key release */
u32 last_rc5; /* last good rc5 code */
u32 last_bit; /* last raw bit seen */
u32 code; /* raw code under construction */
struct timeval base_time; /* time of last seen code */
int active; /* building raw code */
}; };
static int debug; static int debug;
module_param(debug, int, 0644); /* debug level (0,1,2) */ module_param(debug, int, 0644); /* debug level (0,1,2) */
static int repeat_delay = 500;
module_param(repeat_delay, int, 0644);
static int repeat_period = 33;
module_param(repeat_period, int, 0644);
#define DEVNAME "ir-kbd-gpio" #define DEVNAME "ir-kbd-gpio"
#define dprintk(fmt, arg...) if (debug) \ #define dprintk(fmt, arg...) if (debug) \
...@@ -327,6 +402,173 @@ static void ir_work(void *data) ...@@ -327,6 +402,173 @@ static void ir_work(void *data)
mod_timer(&ir->timer, timeout); mod_timer(&ir->timer, timeout);
} }
/* ---------------------------------------------------------------*/
static int rc5_remote_gap = 885;
module_param(rc5_remote_gap, int, 0644);
static int rc5_key_timeout = 200;
module_param(rc5_key_timeout, int, 0644);
#define RC5_START(x) (((x)>>12)&3)
#define RC5_TOGGLE(x) (((x)>>11)&1)
#define RC5_ADDR(x) (((x)>>6)&31)
#define RC5_INSTR(x) ((x)&63)
/* decode raw bit pattern to RC5 code */
static u32 rc5_decode(unsigned int code)
{
unsigned int org_code = code;
unsigned int pair;
unsigned int rc5 = 0;
int i;
code = (code << 1) | 1;
for (i = 0; i < 14; ++i) {
pair = code & 0x3;
code >>= 2;
rc5 <<= 1;
switch (pair) {
case 0:
case 2:
break;
case 1:
rc5 |= 1;
break;
case 3:
dprintk("bad code: %x\n", org_code);
return 0;
}
}
dprintk("code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
"instr=%x\n", rc5, org_code, RC5_START(rc5),
RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
return rc5;
}
static int ir_rc5_irq(struct bttv_sub_device *sub)
{
struct IR *ir = dev_get_drvdata(&sub->dev);
struct timeval tv;
u32 gpio;
u32 gap;
unsigned long current_jiffies, timeout;
/* read gpio port */
gpio = bttv_gpio_read(ir->sub->core);
/* remote IRQ? */
if (!(gpio & 0x20))
return 0;
/* get time of bit */
current_jiffies = jiffies;
do_gettimeofday(&tv);
/* avoid overflow with gap >1s */
if (tv.tv_sec - ir->base_time.tv_sec > 1) {
gap = 200000;
} else {
gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
tv.tv_usec - ir->base_time.tv_usec;
}
/* active code => add bit */
if (ir->active) {
/* only if in the code (otherwise spurious IRQ or timer
late) */
if (ir->last_bit < 28) {
ir->last_bit = (gap - rc5_remote_gap / 2) /
rc5_remote_gap;
ir->code |= 1 << ir->last_bit;
}
/* starting new code */
} else {
ir->active = 1;
ir->code = 0;
ir->base_time = tv;
ir->last_bit = 0;
timeout = current_jiffies + (500 + 30 * HZ) / 1000;
mod_timer(&ir->timer_end, timeout);
}
/* toggle GPIO pin 4 to reset the irq */
bttv_gpio_write(ir->sub->core, gpio & ~(1 << 4));
bttv_gpio_write(ir->sub->core, gpio | (1 << 4));
return 1;
}
static void ir_rc5_timer_end(unsigned long data)
{
struct IR *ir = (struct IR *)data;
struct timeval tv;
unsigned long current_jiffies, timeout;
u32 gap;
/* get time */
current_jiffies = jiffies;
do_gettimeofday(&tv);
/* avoid overflow with gap >1s */
if (tv.tv_sec - ir->base_time.tv_sec > 1) {
gap = 200000;
} else {
gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
tv.tv_usec - ir->base_time.tv_usec;
}
/* Allow some timmer jitter (RC5 is ~24ms anyway so this is ok) */
if (gap < 28000) {
dprintk("spurious timer_end\n");
return;
}
ir->active = 0;
if (ir->last_bit < 20) {
/* ignore spurious codes (caused by light/other remotes) */
dprintk("short code: %x\n", ir->code);
} else {
u32 rc5 = rc5_decode(ir->code);
/* two start bits? */
if (RC5_START(rc5) != 3) {
dprintk("rc5 start bits invalid: %u\n", RC5_START(rc5));
/* right address? */
} else if (RC5_ADDR(rc5) == 0x0) {
u32 toggle = RC5_TOGGLE(rc5);
u32 instr = RC5_INSTR(rc5);
/* Good code, decide if repeat/repress */
if (toggle != RC5_TOGGLE(ir->last_rc5) ||
instr != RC5_INSTR(ir->last_rc5)) {
dprintk("instruction %x, toggle %x\n", instr,
toggle);
ir_input_nokey(ir->input, &ir->ir);
ir_input_keydown(ir->input, &ir->ir, instr,
instr);
}
/* Set/reset key-up timer */
timeout = current_jiffies + (500 + rc5_key_timeout
* HZ) / 1000;
mod_timer(&ir->timer_keyup, timeout);
/* Save code for repeat test */
ir->last_rc5 = rc5;
}
}
}
static void ir_rc5_timer_keyup(unsigned long data)
{
struct IR *ir = (struct IR *)data;
dprintk("key released\n");
ir_input_nokey(ir->input, &ir->ir);
}
/* ---------------------------------------------------------------------- */ /* ---------------------------------------------------------------------- */
static int ir_probe(struct device *dev) static int ir_probe(struct device *dev)
...@@ -400,6 +642,12 @@ static int ir_probe(struct device *dev) ...@@ -400,6 +642,12 @@ static int ir_probe(struct device *dev)
ir->mask_keyup = 0x006000; ir->mask_keyup = 0x006000;
ir->polling = 50; // ms ir->polling = 50; // ms
break; break;
case BTTV_BOARD_NEBULA_DIGITV:
ir_codes = ir_codes_nebula;
driver.any_irq = ir_rc5_irq;
driver.gpio_irq = NULL;
ir->rc5_gpio = 1;
break;
} }
if (NULL == ir_codes) { if (NULL == ir_codes) {
kfree(ir); kfree(ir);
...@@ -407,9 +655,17 @@ static int ir_probe(struct device *dev) ...@@ -407,9 +655,17 @@ static int ir_probe(struct device *dev)
return -ENODEV; return -ENODEV;
} }
if (ir->rc5_gpio) {
u32 gpio;
/* enable remote irq */
bttv_gpio_inout(sub->core, (1 << 4), 1 << 4);
gpio = bttv_gpio_read(sub->core);
bttv_gpio_write(sub->core, gpio & ~(1 << 4));
bttv_gpio_write(sub->core, gpio | (1 << 4));
} else {
/* init hardware-specific stuff */ /* init hardware-specific stuff */
bttv_gpio_inout(sub->core, ir->mask_keycode | ir->mask_keydown, 0); bttv_gpio_inout(sub->core, ir->mask_keycode | ir->mask_keydown, 0);
ir->sub = sub; }
/* init input device */ /* init input device */
snprintf(ir->name, sizeof(ir->name), "bttv IR (card=%d)", snprintf(ir->name, sizeof(ir->name), "bttv IR (card=%d)",
...@@ -417,6 +673,7 @@ static int ir_probe(struct device *dev) ...@@ -417,6 +673,7 @@ static int ir_probe(struct device *dev)
snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0",
pci_name(sub->core->pci)); pci_name(sub->core->pci));
ir->sub = sub;
ir_input_init(input_dev, &ir->ir, ir_type, ir_codes); ir_input_init(input_dev, &ir->ir, ir_type, ir_codes);
input_dev->name = ir->name; input_dev->name = ir->name;
input_dev->phys = ir->phys; input_dev->phys = ir->phys;
...@@ -437,11 +694,25 @@ static int ir_probe(struct device *dev) ...@@ -437,11 +694,25 @@ static int ir_probe(struct device *dev)
ir->timer.function = ir_timer; ir->timer.function = ir_timer;
ir->timer.data = (unsigned long)ir; ir->timer.data = (unsigned long)ir;
schedule_work(&ir->work); schedule_work(&ir->work);
} else if (ir->rc5_gpio) {
/* set timer_end for code completion */
init_timer(&ir->timer_end);
ir->timer_end.function = ir_rc5_timer_end;
ir->timer_end.data = (unsigned long)ir;
init_timer(&ir->timer_keyup);
ir->timer_keyup.function = ir_rc5_timer_keyup;
ir->timer_keyup.data = (unsigned long)ir;
} }
/* all done */ /* all done */
dev_set_drvdata(dev, ir); dev_set_drvdata(dev, ir);
input_register_device(ir->input); input_register_device(ir->input);
printk(DEVNAME ": %s detected at %s\n",ir->name,ir->phys);
/* the remote isn't as bouncy as a keyboard */
ir->input->rep[REP_DELAY] = repeat_delay;
ir->input->rep[REP_PERIOD] = repeat_period;
return 0; return 0;
} }
...@@ -454,6 +725,15 @@ static int ir_remove(struct device *dev) ...@@ -454,6 +725,15 @@ static int ir_remove(struct device *dev)
del_timer(&ir->timer); del_timer(&ir->timer);
flush_scheduled_work(); flush_scheduled_work();
} }
if (ir->rc5_gpio) {
u32 gpio;
del_timer(&ir->timer_end);
flush_scheduled_work();
gpio = bttv_gpio_read(ir->sub->core);
bttv_gpio_write(ir->sub->core, gpio & ~(1 << 4));
}
input_unregister_device(ir->input); input_unregister_device(ir->input);
kfree(ir); kfree(ir);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment