Skip to content

L
linux
Commit 6c911916 authored by Tilman Schmidt's avatar Tilman Schmidt Committed by David S. Miller
Browse files
Options

gigaset: CAPI module readability improvements 

Replace the "ignoring Additional Info" warning message by better
readable ones citing the specific subparameters being ignored.
Make parts of the code more readable by using a local cmsg
pointer variable.

Impact: readability improvement
Signed-off-by: default avatarTilman Schmidt <tilman@imap.cc>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent dc343475
Show whitespace changes
Inline Side-by-side
Showing with 81 additions and 63 deletions
drivers/isdn/gigaset/capi.c
View file @ 6c911916
......@@ -168,14 +168,6 @@ static inline void ignore_cstruct_param(struct cardstate *cs, _cstruct param,
msgname, paramname);
}
static inline void ignore_cmstruct_param(struct cardstate *cs, _cmstruct param,
char *msgname, char *paramname)
{
if (param != CAPI_DEFAULT)
dev_warn(cs->dev, "%s: ignoring unsupported parameter: %s\n",
msgname, paramname);
}
/*
* check for legal hex digit
*/
......@@ -1062,6 +1054,7 @@ static void do_facility_req(struct gigaset_capi_ctr *iif,
struct sk_buff *skb)
{
struct cardstate *cs = iif->ctr.driverdata;
_cmsg *cmsg = &iif->acmsg;
struct sk_buff *cskb;
u8 *pparam;
unsigned int msgsize = CAPI_FACILITY_CONF_BASELEN;
......@@ -1069,14 +1062,14 @@ static void do_facility_req(struct gigaset_capi_ctr *iif,
static u8 confparam[10]; /* max. 9 octets + length byte */
/* decode message */
capi_message2cmsg(&iif->acmsg, skb->data);
dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
capi_message2cmsg(cmsg, skb->data);
dump_cmsg(DEBUG_CMD, __func__, cmsg);
/*
* Facility Request Parameter is not decoded by capi_message2cmsg()
* encoding depends on Facility Selector
*/
switch (iif->acmsg.FacilitySelector) {
switch (cmsg->FacilitySelector) {
case CAPI_FACILITY_DTMF: /* ToDo */
info = CapiFacilityNotSupported;
confparam[0] = 2; /* length */
......@@ -1093,7 +1086,7 @@ static void do_facility_req(struct gigaset_capi_ctr *iif,
case CAPI_FACILITY_SUPPSVC:
/* decode Function parameter */
pparam = iif->acmsg.FacilityRequestParameter;
pparam = cmsg->FacilityRequestParameter;
if (pparam == NULL || *pparam < 2) {
dev_notice(cs->dev, "%s: %s missing\n", "FACILITY_REQ",
"Facility Request Parameter");
......@@ -1141,17 +1134,17 @@ static void do_facility_req(struct gigaset_capi_ctr *iif,
}
/* send FACILITY_CONF with given Info and confirmation parameter */
capi_cmsg_answer(&iif->acmsg);
iif->acmsg.Info = info;
iif->acmsg.FacilityConfirmationParameter = confparam;
capi_cmsg_answer(cmsg);
cmsg->Info = info;
cmsg->FacilityConfirmationParameter = confparam;
msgsize += confparam[0]; /* length */
cskb = alloc_skb(msgsize, GFP_ATOMIC);
if (!cskb) {
dev_err(cs->dev, "%s: out of memory\n", __func__);
return;
}
capi_cmsg2message(&iif->acmsg, __skb_put(cskb, msgsize));
dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
capi_cmsg2message(cmsg, __skb_put(cskb, msgsize));
dump_cmsg(DEBUG_CMD, __func__, cmsg);
capi_ctr_handle_message(&iif->ctr, ap->id, cskb);
}
......@@ -1207,8 +1200,8 @@ static void do_connect_req(struct gigaset_capi_ctr *iif,
u16 info;
/* decode message */
capi_message2cmsg(&iif->acmsg, skb->data);
dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
capi_message2cmsg(cmsg, skb->data);
dump_cmsg(DEBUG_CMD, __func__, cmsg);
/* get free B channel & construct PLCI */
bcs = gigaset_get_free_channel(cs);
......@@ -1411,8 +1404,16 @@ static void do_connect_req(struct gigaset_capi_ctr *iif,
"CONNECT_REQ", "Calling pty subaddr");
ignore_cstruct_param(cs, cmsg->LLC,
"CONNECT_REQ", "LLC");
ignore_cmstruct_param(cs, cmsg->AdditionalInfo,
"CONNECT_REQ", "Additional Info");
if (cmsg->AdditionalInfo != CAPI_DEFAULT) {
ignore_cstruct_param(cs, cmsg->BChannelinformation,
"CONNECT_REQ", "B Channel Information");
ignore_cstruct_param(cs, cmsg->Keypadfacility,
"CONNECT_REQ", "Keypad Facility");
ignore_cstruct_param(cs, cmsg->Useruserdata,
"CONNECT_REQ", "User-User Data");
ignore_cstruct_param(cs, cmsg->Facilitydataarray,
"CONNECT_REQ", "Facility Data Array");
}
/* encode parameter: B channel to use */
commands[AT_ISO] = kmalloc(9, GFP_KERNEL);
......@@ -1458,8 +1459,8 @@ static void do_connect_resp(struct gigaset_capi_ctr *iif,
int channel;
/* decode message */
capi_message2cmsg(&iif->acmsg, skb->data);
dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
capi_message2cmsg(cmsg, skb->data);
dump_cmsg(DEBUG_CMD, __func__, cmsg);
dev_kfree_skb(skb);
/* extract and check channel number from PLCI */
......@@ -1524,8 +1525,16 @@ static void do_connect_resp(struct gigaset_capi_ctr *iif,
"CONNECT_RESP", "Connected Subaddress");
ignore_cstruct_param(cs, cmsg->LLC,
"CONNECT_RESP", "LLC");
ignore_cmstruct_param(cs, cmsg->AdditionalInfo,
"CONNECT_RESP", "Additional Info");
if (cmsg->AdditionalInfo != CAPI_DEFAULT) {
ignore_cstruct_param(cs, cmsg->BChannelinformation,
"CONNECT_RESP", "BChannel Information");
ignore_cstruct_param(cs, cmsg->Keypadfacility,
"CONNECT_RESP", "Keypad Facility");
ignore_cstruct_param(cs, cmsg->Useruserdata,
"CONNECT_RESP", "User-User Data");
ignore_cstruct_param(cs, cmsg->Facilitydataarray,
"CONNECT_RESP", "Facility Data Array");
}
/* Accept call */
if (!gigaset_add_event(cs, &cs->bcs[channel-1].at_state,
......@@ -1587,17 +1596,18 @@ static void do_connect_b3_req(struct gigaset_capi_ctr *iif,
struct sk_buff *skb)
{
struct cardstate *cs = iif->ctr.driverdata;
_cmsg *cmsg = &iif->acmsg;
int channel;
/* decode message */
capi_message2cmsg(&iif->acmsg, skb->data);
dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
capi_message2cmsg(cmsg, skb->data);
dump_cmsg(DEBUG_CMD, __func__, cmsg);
/* extract and check channel number from PLCI */
channel = (iif->acmsg.adr.adrPLCI >> 8) & 0xff;
channel = (cmsg->adr.adrPLCI >> 8) & 0xff;
if (!channel || channel > cs->channels) {
dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
"CONNECT_B3_REQ", "PLCI", iif->acmsg.adr.adrPLCI);
"CONNECT_B3_REQ", "PLCI", cmsg->adr.adrPLCI);
send_conf(iif, ap, skb, CapiIllContrPlciNcci);
return;
}
......@@ -1606,13 +1616,11 @@ static void do_connect_b3_req(struct gigaset_capi_ctr *iif,
ap->connected = APCONN_ACTIVE;
/* build NCCI: always 1 (one B3 connection only) */
iif->acmsg.adr.adrNCCI |= 1 << 16;
cmsg->adr.adrNCCI |= 1 << 16;
/* NCPI parameter: not applicable for B3 Transparent */
ignore_cstruct_param(cs, iif->acmsg.NCPI,
"CONNECT_B3_REQ", "NCPI");
send_conf(iif, ap, skb,
(iif->acmsg.NCPI && iif->acmsg.NCPI[0]) ?
ignore_cstruct_param(cs, cmsg->NCPI, "CONNECT_B3_REQ", "NCPI");
send_conf(iif, ap, skb, (cmsg->NCPI && cmsg->NCPI[0]) ?
CapiNcpiNotSupportedByProtocol : CapiSuccess);
}
......@@ -1628,27 +1636,28 @@ static void do_connect_b3_resp(struct gigaset_capi_ctr *iif,
struct sk_buff *skb)
{
struct cardstate *cs = iif->ctr.driverdata;
struct bc_state *bcs = NULL;
_cmsg *cmsg = &iif->acmsg;
struct bc_state *bcs;
int channel;
unsigned int msgsize;
u8 command;
/* decode message */
capi_message2cmsg(&iif->acmsg, skb->data);
dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
capi_message2cmsg(cmsg, skb->data);
dump_cmsg(DEBUG_CMD, __func__, cmsg);
/* extract and check channel number and NCCI */
channel = (iif->acmsg.adr.adrNCCI >> 8) & 0xff;
channel = (cmsg->adr.adrNCCI >> 8) & 0xff;
if (!channel || channel > cs->channels ||
((iif->acmsg.adr.adrNCCI >> 16) & 0xffff) != 1) {
((cmsg->adr.adrNCCI >> 16) & 0xffff) != 1) {
dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
"CONNECT_B3_RESP", "NCCI", iif->acmsg.adr.adrNCCI);
"CONNECT_B3_RESP", "NCCI", cmsg->adr.adrNCCI);
dev_kfree_skb(skb);
return;
}
bcs = &cs->bcs[channel-1];
if (iif->acmsg.Reject) {
if (cmsg->Reject) {
/* Reject: clear B3 connect received flag */
ap->connected = APCONN_SETUP;
......@@ -1673,11 +1682,11 @@ static void do_connect_b3_resp(struct gigaset_capi_ctr *iif,
command = CAPI_CONNECT_B3_ACTIVE;
msgsize = CAPI_CONNECT_B3_ACTIVE_IND_BASELEN;
}
capi_cmsg_header(&iif->acmsg, ap->id, command, CAPI_IND,
ap->nextMessageNumber++, iif->acmsg.adr.adrNCCI);
capi_cmsg_header(cmsg, ap->id, command, CAPI_IND,
ap->nextMessageNumber++, cmsg->adr.adrNCCI);
__skb_trim(skb, msgsize);
capi_cmsg2message(&iif->acmsg, skb->data);
dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
capi_cmsg2message(cmsg, skb->data);
dump_cmsg(DEBUG_CMD, __func__, cmsg);
capi_ctr_handle_message(&iif->ctr, ap->id, skb);
}
......@@ -1691,28 +1700,37 @@ static void do_disconnect_req(struct gigaset_capi_ctr *iif,
struct sk_buff *skb)
{
struct cardstate *cs = iif->ctr.driverdata;
_cmsg *cmsg = &iif->acmsg;
struct bc_state *bcs;
_cmsg *b3cmsg;
struct sk_buff *b3skb;
int channel;
/* decode message */
capi_message2cmsg(&iif->acmsg, skb->data);
dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
capi_message2cmsg(cmsg, skb->data);
dump_cmsg(DEBUG_CMD, __func__, cmsg);
/* extract and check channel number from PLCI */
channel = (iif->acmsg.adr.adrPLCI >> 8) & 0xff;
channel = (cmsg->adr.adrPLCI >> 8) & 0xff;
if (!channel || channel > cs->channels) {
dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
"DISCONNECT_REQ", "PLCI", iif->acmsg.adr.adrPLCI);
"DISCONNECT_REQ", "PLCI", cmsg->adr.adrPLCI);
send_conf(iif, ap, skb, CapiIllContrPlciNcci);
return;
}
bcs = cs->bcs + channel - 1;
/* ToDo: process parameter: Additional info */
ignore_cmstruct_param(cs, iif->acmsg.AdditionalInfo,
"DISCONNECT_REQ", "Additional Info");
if (cmsg->AdditionalInfo != CAPI_DEFAULT) {
ignore_cstruct_param(cs, cmsg->BChannelinformation,
"DISCONNECT_REQ", "B Channel Information");
ignore_cstruct_param(cs, cmsg->Keypadfacility,
"DISCONNECT_REQ", "Keypad Facility");
ignore_cstruct_param(cs, cmsg->Useruserdata,
"DISCONNECT_REQ", "User-User Data");
ignore_cstruct_param(cs, cmsg->Facilitydataarray,
"DISCONNECT_REQ", "Facility Data Array");
}
/* skip if DISCONNECT_IND already sent */
if (!ap->connected)
......@@ -1733,7 +1751,7 @@ static void do_disconnect_req(struct gigaset_capi_ctr *iif,
}
capi_cmsg_header(b3cmsg, ap->id, CAPI_DISCONNECT_B3, CAPI_IND,
ap->nextMessageNumber++,
iif->acmsg.adr.adrPLCI | (1 << 16));
cmsg->adr.adrPLCI | (1 << 16));
b3cmsg->Reason_B3 = CapiProtocolErrorLayer1;
b3skb = alloc_skb(CAPI_DISCONNECT_B3_IND_BASELEN, GFP_KERNEL);
if (b3skb == NULL) {
......@@ -1769,18 +1787,19 @@ static void do_disconnect_b3_req(struct gigaset_capi_ctr *iif,
struct sk_buff *skb)
{
struct cardstate *cs = iif->ctr.driverdata;
_cmsg *cmsg = &iif->acmsg;
int channel;
/* decode message */
capi_message2cmsg(&iif->acmsg, skb->data);
dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
capi_message2cmsg(cmsg, skb->data);
dump_cmsg(DEBUG_CMD, __func__, cmsg);
/* extract and check channel number and NCCI */
channel = (iif->acmsg.adr.adrNCCI >> 8) & 0xff;
channel = (cmsg->adr.adrNCCI >> 8) & 0xff;
if (!channel || channel > cs->channels ||
((iif->acmsg.adr.adrNCCI >> 16) & 0xffff) != 1) {
((cmsg->adr.adrNCCI >> 16) & 0xffff) != 1) {
dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
"DISCONNECT_B3_REQ", "NCCI", iif->acmsg.adr.adrNCCI);
"DISCONNECT_B3_REQ", "NCCI", cmsg->adr.adrNCCI);
send_conf(iif, ap, skb, CapiIllContrPlciNcci);
return;
}
......@@ -1803,10 +1822,9 @@ static void do_disconnect_b3_req(struct gigaset_capi_ctr *iif,
gigaset_schedule_event(cs);
/* NCPI parameter: not applicable for B3 Transparent */
ignore_cstruct_param(cs, iif->acmsg.NCPI,
ignore_cstruct_param(cs, cmsg->NCPI,
"DISCONNECT_B3_REQ", "NCPI");
send_conf(iif, ap, skb,
(iif->acmsg.NCPI && iif->acmsg.NCPI[0]) ?
send_conf(iif, ap, skb, (cmsg->NCPI && cmsg->NCPI[0]) ?
CapiNcpiNotSupportedByProtocol : CapiSuccess);
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7