[media] tm6000: add audio standards table

The better is to remove the audio init from tm6000-core and add a
separate per-standard set of tables.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/staging/tm6000/tm6000-core.c

@@ -202,6 +202,10 @@ int tm6000_init_analog_mode(struct tm6000_core *dev)
 		val &= ~0x40;
 		tm6000_set_reg(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, val);
 
+		tm6000_set_reg(dev, TM6010_REQ08_RF1_AADC_POWER_DOWN, 0xfc);
+
+#if 0		/* FIXME: VBI is standard-dependent */
+
 		/* Init teletext */
 		tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x01);
 		tm6000_set_reg(dev, TM6010_REQ07_R41_TELETEXT_VBI_CODE1, 0x27);
@@ -251,44 +255,7 @@ int tm6000_init_analog_mode(struct tm6000_core *dev)
 		tm6000_set_reg(dev, TM6010_REQ07_R5B_VBI_TELETEXT_DTO0, 0x4c);
 		tm6000_set_reg(dev, TM6010_REQ07_R40_TELETEXT_VBI_CODE0, 0x01);
 		tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x00);
-
-
-		/* Init audio */
-		tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x00);
-		tm6000_set_reg(dev, TM6010_REQ08_R02_A_FIX_GAIN_CTRL, 0x04);
-		tm6000_set_reg(dev, TM6010_REQ08_R03_A_AUTO_GAIN_CTRL, 0x00);
-		tm6000_set_reg(dev, TM6010_REQ08_R04_A_SIF_AMP_CTRL, 0xa0);
-		tm6000_set_reg(dev, TM6010_REQ08_R06_A_SOUND_MOD, 0x06);
-		tm6000_set_reg(dev, TM6010_REQ08_R07_A_LEFT_VOL, 0x00);
-		tm6000_set_reg(dev, TM6010_REQ08_R08_A_RIGHT_VOL, 0x00);
-		tm6000_set_reg(dev, TM6010_REQ08_R09_A_MAIN_VOL, 0x08);
-		tm6000_set_reg(dev, TM6010_REQ08_R0A_A_I2S_MOD, 0x91);
-		tm6000_set_reg(dev, TM6010_REQ08_R0B_A_ASD_THRES1, 0x20);
-		tm6000_set_reg(dev, TM6010_REQ08_R0C_A_ASD_THRES2, 0x12);
-		tm6000_set_reg(dev, TM6010_REQ08_R0D_A_AMD_THRES, 0x20);
-		tm6000_set_reg(dev, TM6010_REQ08_R0E_A_MONO_THRES1, 0xf0);
-		tm6000_set_reg(dev, TM6010_REQ08_R0F_A_MONO_THRES2, 0x80);
-		tm6000_set_reg(dev, TM6010_REQ08_R10_A_MUTE_THRES1, 0xc0);
-		tm6000_set_reg(dev, TM6010_REQ08_R11_A_MUTE_THRES2, 0x80);
-		tm6000_set_reg(dev, TM6010_REQ08_R12_A_AGC_U, 0x12);
-		tm6000_set_reg(dev, TM6010_REQ08_R13_A_AGC_ERR_T, 0xfe);
-		tm6000_set_reg(dev, TM6010_REQ08_R14_A_AGC_GAIN_INIT, 0x20);
-		tm6000_set_reg(dev, TM6010_REQ08_R15_A_AGC_STEP_THR, 0x14);
-		tm6000_set_reg(dev, TM6010_REQ08_R16_A_AGC_GAIN_MAX, 0xfe);
-		tm6000_set_reg(dev, TM6010_REQ08_R17_A_AGC_GAIN_MIN, 0x01);
-		tm6000_set_reg(dev, TM6010_REQ08_R18_A_TR_CTRL, 0xa0);
-		tm6000_set_reg(dev, TM6010_REQ08_R19_A_FH_2FH_GAIN, 0x32);
-		tm6000_set_reg(dev, TM6010_REQ08_R1A_A_NICAM_SER_MAX, 0x64);
-		tm6000_set_reg(dev, TM6010_REQ08_R1B_A_NICAM_SER_MIN, 0x20);
-		tm6000_set_reg(dev, REQ_08_SET_GET_AVREG_BIT, 0x1c, 0x00);
-		tm6000_set_reg(dev, REQ_08_SET_GET_AVREG_BIT, 0x1d, 0x00);
-		tm6000_set_reg(dev, TM6010_REQ08_R1E_A_GAIN_DEEMPH_OUT, 0x13);
-		tm6000_set_reg(dev, TM6010_REQ08_R1F_A_TEST_INTF_SEL, 0x00);
-		tm6000_set_reg(dev, TM6010_REQ08_R20_A_TEST_PIN_SEL, 0x00);
-		tm6000_set_reg(dev, TM6010_REQ08_RE4_ADC_IN2_SEL, 0xf3);
-		tm6000_set_reg(dev, TM6010_REQ08_R06_A_SOUND_MOD, 0x00);
-		tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x80);
-
+#endif
 	} else {
 		/* Enables soft reset */
 		tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x01);
@@ -370,7 +337,6 @@ int tm6000_init_digital_mode(struct tm6000_core *dev)
 		tm6000_set_reg(dev, TM6010_REQ07_RFE_POWER_DOWN, 0x28);
 		tm6000_set_reg(dev, TM6010_REQ08_RE2_POWER_DOWN_CTRL1, 0xfc);
 		tm6000_set_reg(dev, TM6010_REQ08_RE6_POWER_DOWN_CTRL2, 0xff);
-		tm6000_set_reg(dev, TM6010_REQ08_RF1_AADC_POWER_DOWN, 0xfe);
 		tm6000_read_write_usb(dev, 0xc0, 0x0e, 0x00c2, 0x0008, buf, 2);
 		printk(KERN_INFO"buf %#x %#x\n", buf[0], buf[1]);
 	} else  {

drivers/staging/tm6000/tm6000-video.c

@@ -1015,7 +1015,8 @@ static int vidioc_s_std (struct file *file, void *priv, v4l2_std_id *norm)
 	struct tm6000_fh   *fh=priv;
 	struct tm6000_core *dev = fh->dev;
 
-	rc=tm6000_set_standard (dev, norm);
+	rc = tm6000_set_standard(dev, norm);
+	rc = tm6000_init_analog_mode(dev);
 
 	fh->width  = dev->width;
 	fh->height = dev->height;
@@ -1292,9 +1293,10 @@ static int tm6000_open(struct file *file)
 				"active=%d\n",list_empty(&dev->vidq.active));
 
 	/* initialize hardware on analog mode */
-	if (dev->mode!=TM6000_MODE_ANALOG) {
-		rc=tm6000_init_analog_mode (dev);
-		if (rc<0)
+//	if (dev->mode!=TM6000_MODE_ANALOG) {
+//		rc = tm6000_set_standard(dev, dev->norm);
+		rc += tm6000_init_analog_mode(dev);
+		if (rc < 0)
 			return rc;
 
 		/* Put all controls at a sane state */
@@ -1302,7 +1304,7 @@ static int tm6000_open(struct file *file)
 			qctl_regs[i] =tm6000_qctrl[i].default_value;
 
 		dev->mode=TM6000_MODE_ANALOG;
-	}
+//	}
 
 	videobuf_queue_vmalloc_init(&fh->vb_vidq, &tm6000_video_qops,
 			NULL, &dev->slock,