Merge branch 'x86-vmware-for-linus' of...

Merge branch 'x86-vmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-vmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, paravirt: Remove alloc_pmd_clone hook, only used by VMI
  x86, vmware: Remove deprecated VMI kernel support

Fix up trivial #include conflict in arch/x86/kernel/smpboot.c

Documentation/feature-removal-schedule.txt

@@ -386,34 +386,6 @@ Who:	Tejun Heo <tj@kernel.org>
 
 ----------------------------
 
-What:	Support for VMware's guest paravirtuliazation technique [VMI] will be
-	dropped.
-When:	2.6.37 or earlier.
-Why:	With the recent innovations in CPU hardware acceleration technologies
-	from Intel and AMD, VMware ran a few experiments to compare these
-	techniques to guest paravirtualization technique on VMware's platform.
-	These hardware assisted virtualization techniques have outperformed the
-	performance benefits provided by VMI in most of the workloads. VMware
-	expects that these hardware features will be ubiquitous in a couple of
-	years, as a result, VMware has started a phased retirement of this
-	feature from the hypervisor. We will be removing this feature from the
-	Kernel too. Right now we are targeting 2.6.37 but can retire earlier if
-	technical reasons (read opportunity to remove major chunk of pvops)
-	arise.
-
-	Please note that VMI has always been an optimization and non-VMI kernels
-	still work fine on VMware's platform.
-	Latest versions of VMware's product which support VMI are,
-	Workstation 7.0 and VSphere 4.0 on ESX side, future maintainence
-	releases for these products will continue supporting VMI.
-
-	For more details about VMI retirement take a look at this,
-	http://blogs.vmware.com/guestosguide/2009/09/vmi-retirement.html
-
-Who:	Alok N Kataria <akataria@vmware.com>
-
-----------------------------
-
 What:	Support for lcd_switch and display_get in asus-laptop driver
 When:	March 2010
 Why:	These two features use non-standard interfaces. There are the

Documentation/kernel-parameters.txt

@@ -455,7 +455,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			[ARM] imx_timer1,OSTS,netx_timer,mpu_timer2,
 				pxa_timer,timer3,32k_counter,timer0_1
 			[AVR32] avr32
-			[X86-32] pit,hpet,tsc,vmi-timer;
+			[X86-32] pit,hpet,tsc;
 				scx200_hrt on Geode; cyclone on IBM x440
 			[MIPS] MIPS
 			[PARISC] cr16

arch/x86/Kconfig

@@ -521,25 +521,6 @@ if PARAVIRT_GUEST
 
 source "arch/x86/xen/Kconfig"
 
-config VMI
-	bool "VMI Guest support (DEPRECATED)"
-	select PARAVIRT
-	depends on X86_32
-	---help---
-	  VMI provides a paravirtualized interface to the VMware ESX server
-	  (it could be used by other hypervisors in theory too, but is not
-	  at the moment), by linking the kernel to a GPL-ed ROM module
-	  provided by the hypervisor.
-
-	  As of September 2009, VMware has started a phased retirement
-	  of this feature from VMware's products. Please see
-	  feature-removal-schedule.txt for details.  If you are
-	  planning to enable this option, please note that you cannot
-	  live migrate a VMI enabled VM to a future VMware product,
-	  which doesn't support VMI. So if you expect your kernel to
-	  seamlessly migrate to newer VMware products, keep this
-	  disabled.
-
 config KVM_CLOCK
 	bool "KVM paravirtualized clock"
 	select PARAVIRT

arch/x86/include/asm/paravirt.h

@@ -416,11 +416,6 @@ static inline void paravirt_alloc_pmd(struct mm_struct *mm, unsigned long pfn)
 	PVOP_VCALL2(pv_mmu_ops.alloc_pmd, mm, pfn);
 }
 
-static inline void paravirt_alloc_pmd_clone(unsigned long pfn, unsigned long clonepfn,
-					    unsigned long start, unsigned long count)
-{
-	PVOP_VCALL4(pv_mmu_ops.alloc_pmd_clone, pfn, clonepfn, start, count);
-}
 static inline void paravirt_release_pmd(unsigned long pfn)
 {
 	PVOP_VCALL1(pv_mmu_ops.release_pmd, pfn);

arch/x86/include/asm/paravirt_types.h

@@ -255,7 +255,6 @@ struct pv_mmu_ops {
 	 */
 	void (*alloc_pte)(struct mm_struct *mm, unsigned long pfn);
 	void (*alloc_pmd)(struct mm_struct *mm, unsigned long pfn);
-	void (*alloc_pmd_clone)(unsigned long pfn, unsigned long clonepfn, unsigned long start, unsigned long count);
 	void (*alloc_pud)(struct mm_struct *mm, unsigned long pfn);
 	void (*release_pte)(unsigned long pfn);
 	void (*release_pmd)(unsigned long pfn);

arch/x86/include/asm/vmi.h

-/*
- * VMI interface definition
- *
- * Copyright (C) 2005, VMware, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Maintained by: Zachary Amsden zach@vmware.com
- *
- */
-#include <linux/types.h>
-
-/*
- *---------------------------------------------------------------------
- *
- *  VMI Option ROM API
- *
- *---------------------------------------------------------------------
- */
-#define VMI_SIGNATURE 0x696d5663   /* "cVmi" */
-
-#define PCI_VENDOR_ID_VMWARE            0x15AD
-#define PCI_DEVICE_ID_VMWARE_VMI        0x0801
-
-/*
- * We use two version numbers for compatibility, with the major
- * number signifying interface breakages, and the minor number
- * interface extensions.
- */
-#define VMI_API_REV_MAJOR       3
-#define VMI_API_REV_MINOR       0
-
-#define VMI_CALL_CPUID			0
-#define VMI_CALL_WRMSR			1
-#define VMI_CALL_RDMSR			2
-#define VMI_CALL_SetGDT			3
-#define VMI_CALL_SetLDT			4
-#define VMI_CALL_SetIDT			5
-#define VMI_CALL_SetTR			6
-#define VMI_CALL_GetGDT			7
-#define VMI_CALL_GetLDT			8
-#define VMI_CALL_GetIDT			9
-#define VMI_CALL_GetTR			10
-#define VMI_CALL_WriteGDTEntry		11
-#define VMI_CALL_WriteLDTEntry		12
-#define VMI_CALL_WriteIDTEntry		13
-#define VMI_CALL_UpdateKernelStack	14
-#define VMI_CALL_SetCR0			15
-#define VMI_CALL_SetCR2			16
-#define VMI_CALL_SetCR3			17
-#define VMI_CALL_SetCR4			18
-#define VMI_CALL_GetCR0			19
-#define VMI_CALL_GetCR2			20
-#define VMI_CALL_GetCR3			21
-#define VMI_CALL_GetCR4			22
-#define VMI_CALL_WBINVD			23
-#define VMI_CALL_SetDR			24
-#define VMI_CALL_GetDR			25
-#define VMI_CALL_RDPMC			26
-#define VMI_CALL_RDTSC			27
-#define VMI_CALL_CLTS			28
-#define VMI_CALL_EnableInterrupts	29
-#define VMI_CALL_DisableInterrupts	30
-#define VMI_CALL_GetInterruptMask	31
-#define VMI_CALL_SetInterruptMask	32
-#define VMI_CALL_IRET			33
-#define VMI_CALL_SYSEXIT		34
-#define VMI_CALL_Halt			35
-#define VMI_CALL_Reboot			36
-#define VMI_CALL_Shutdown		37
-#define VMI_CALL_SetPxE			38
-#define VMI_CALL_SetPxELong		39
-#define VMI_CALL_UpdatePxE		40
-#define VMI_CALL_UpdatePxELong		41
-#define VMI_CALL_MachineToPhysical	42
-#define VMI_CALL_PhysicalToMachine	43
-#define VMI_CALL_AllocatePage		44
-#define VMI_CALL_ReleasePage		45
-#define VMI_CALL_InvalPage		46
-#define VMI_CALL_FlushTLB		47
-#define VMI_CALL_SetLinearMapping	48
-
-#define VMI_CALL_SetIOPLMask		61
-#define VMI_CALL_SetInitialAPState	62
-#define VMI_CALL_APICWrite		63
-#define VMI_CALL_APICRead		64
-#define VMI_CALL_IODelay		65
-#define VMI_CALL_SetLazyMode		73
-
-/*
- *---------------------------------------------------------------------
- *
- * MMU operation flags
- *
- *---------------------------------------------------------------------
- */
-
-/* Flags used by VMI_{Allocate|Release}Page call */
-#define VMI_PAGE_PAE             0x10  /* Allocate PAE shadow */
-#define VMI_PAGE_CLONE           0x20  /* Clone from another shadow */
-#define VMI_PAGE_ZEROED          0x40  /* Page is pre-zeroed */
-
-
-/* Flags shared by Allocate|Release Page and PTE updates */
-#define VMI_PAGE_PT              0x01
-#define VMI_PAGE_PD              0x02
-#define VMI_PAGE_PDP             0x04
-#define VMI_PAGE_PML4            0x08
-
-#define VMI_PAGE_NORMAL          0x00 /* for debugging */
-
-/* Flags used by PTE updates */
-#define VMI_PAGE_CURRENT_AS      0x10 /* implies VMI_PAGE_VA_MASK is valid */
-#define VMI_PAGE_DEFER           0x20 /* may queue update until TLB inval */
-#define VMI_PAGE_VA_MASK         0xfffff000
-
-#ifdef CONFIG_X86_PAE
-#define VMI_PAGE_L1		(VMI_PAGE_PT | VMI_PAGE_PAE | VMI_PAGE_ZEROED)
-#define VMI_PAGE_L2		(VMI_PAGE_PD | VMI_PAGE_PAE | VMI_PAGE_ZEROED)
-#else
-#define VMI_PAGE_L1		(VMI_PAGE_PT | VMI_PAGE_ZEROED)
-#define VMI_PAGE_L2		(VMI_PAGE_PD | VMI_PAGE_ZEROED)
-#endif
-
-/* Flags used by VMI_FlushTLB call */
-#define VMI_FLUSH_TLB            0x01
-#define VMI_FLUSH_GLOBAL         0x02
-
-/*
- *---------------------------------------------------------------------
- *
- *  VMI relocation definitions for ROM call get_reloc
- *
- *---------------------------------------------------------------------
- */
-
-/* VMI Relocation types */
-#define VMI_RELOCATION_NONE     0
-#define VMI_RELOCATION_CALL_REL 1
-#define VMI_RELOCATION_JUMP_REL 2
-#define VMI_RELOCATION_NOP	3
-
-#ifndef __ASSEMBLY__
-struct vmi_relocation_info {
-	unsigned char           *eip;
-	unsigned char           type;
-	unsigned char           reserved[3];
-};
-#endif
-
-
-/*
- *---------------------------------------------------------------------
- *
- *  Generic ROM structures and definitions
- *
- *---------------------------------------------------------------------
- */
-
-#ifndef __ASSEMBLY__
-
-struct vrom_header {
-	u16     rom_signature;  /* option ROM signature */
-	u8      rom_length;     /* ROM length in 512 byte chunks */
-	u8      rom_entry[4];   /* 16-bit code entry point */
-	u8      rom_pad0;       /* 4-byte align pad */
-	u32     vrom_signature; /* VROM identification signature */
-	u8      api_version_min;/* Minor version of API */
-	u8      api_version_maj;/* Major version of API */
-	u8      jump_slots;     /* Number of jump slots */
-	u8      reserved1;      /* Reserved for expansion */
-	u32     virtual_top;    /* Hypervisor virtual address start */
-	u16     reserved2;      /* Reserved for expansion */
-	u16	license_offs;	/* Offset to License string */
-	u16     pci_header_offs;/* Offset to PCI OPROM header */
-	u16     pnp_header_offs;/* Offset to PnP OPROM header */
-	u32     rom_pad3;       /* PnP reserverd / VMI reserved */
-	u8      reserved[96];   /* Reserved for headers */
-	char    vmi_init[8];    /* VMI_Init jump point */
-	char    get_reloc[8];   /* VMI_GetRelocationInfo jump point */
-} __attribute__((packed));
-
-struct pnp_header {
-	char sig[4];
-	char rev;
-	char size;
-	short next;
-	short res;
-	long devID;
-	unsigned short manufacturer_offset;
-	unsigned short product_offset;
-} __attribute__((packed));
-
-struct pci_header {
-	char sig[4];
-	short vendorID;
-	short deviceID;
-	short vpdData;
-	short size;
-	char rev;
-	char class;
-	char subclass;
-	char interface;
-	short chunks;
-	char rom_version_min;
-	char rom_version_maj;
-	char codetype;
-	char lastRom;
-	short reserved;
-} __attribute__((packed));
-
-/* Function prototypes for bootstrapping */
-#ifdef CONFIG_VMI
-extern void vmi_init(void);
-extern void vmi_activate(void);
-extern void vmi_bringup(void);
-#else
-static inline void vmi_init(void) {}
-static inline void vmi_activate(void) {}
-static inline void vmi_bringup(void) {}
-#endif
-
-/* State needed to start an application processor in an SMP system. */
-struct vmi_ap_state {
-	u32 cr0;
-	u32 cr2;
-	u32 cr3;
-	u32 cr4;
-
-	u64 efer;
-
-	u32 eip;
-	u32 eflags;
-	u32 eax;
-	u32 ebx;
-	u32 ecx;
-	u32 edx;
-	u32 esp;
-	u32 ebp;
-	u32 esi;
-	u32 edi;
-	u16 cs;
-	u16 ss;
-	u16 ds;
-	u16 es;
-	u16 fs;
-	u16 gs;
-	u16 ldtr;
-
-	u16 gdtr_limit;
-	u32 gdtr_base;
-	u32 idtr_base;
-	u16 idtr_limit;
-};
-
-#endif

arch/x86/include/asm/vmi_time.h

-/*
- * VMI Time wrappers
- *
- * Copyright (C) 2006, VMware, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to dhecht@vmware.com
- *
- */
-
-#ifndef _ASM_X86_VMI_TIME_H
-#define _ASM_X86_VMI_TIME_H
-
-/*
- * Raw VMI call indices for timer functions
- */
-#define VMI_CALL_GetCycleFrequency	66
-#define VMI_CALL_GetCycleCounter	67
-#define VMI_CALL_SetAlarm		68
-#define VMI_CALL_CancelAlarm		69
-#define VMI_CALL_GetWallclockTime	70
-#define VMI_CALL_WallclockUpdated	71
-
-/* Cached VMI timer operations */
-extern struct vmi_timer_ops {
-	u64 (*get_cycle_frequency)(void);
-	u64 (*get_cycle_counter)(int);
-	u64 (*get_wallclock)(void);
-	int (*wallclock_updated)(void);
-	void (*set_alarm)(u32 flags, u64 expiry, u64 period);
-	void (*cancel_alarm)(u32 flags);
-} vmi_timer_ops;
-
-/* Prototypes */
-extern void __init vmi_time_init(void);
-extern unsigned long vmi_get_wallclock(void);
-extern int vmi_set_wallclock(unsigned long now);
-extern unsigned long long vmi_sched_clock(void);
-extern unsigned long vmi_tsc_khz(void);
-
-#ifdef CONFIG_X86_LOCAL_APIC
-extern void __devinit vmi_time_bsp_init(void);
-extern void __devinit vmi_time_ap_init(void);
-#endif
-
-/*
- * When run under a hypervisor, a vcpu is always in one of three states:
- * running, halted, or ready.  The vcpu is in the 'running' state if it
- * is executing.  When the vcpu executes the halt interface, the vcpu
- * enters the 'halted' state and remains halted until there is some work
- * pending for the vcpu (e.g. an alarm expires, host I/O completes on
- * behalf of virtual I/O).  At this point, the vcpu enters the 'ready'
- * state (waiting for the hypervisor to reschedule it).  Finally, at any
- * time when the vcpu is not in the 'running' state nor the 'halted'
- * state, it is in the 'ready' state.
- *
- * Real time is advances while the vcpu is 'running', 'ready', or
- * 'halted'.  Stolen time is the time in which the vcpu is in the
- * 'ready' state.  Available time is the remaining time -- the vcpu is
- * either 'running' or 'halted'.
- *
- * All three views of time are accessible through the VMI cycle
- * counters.
- */
-
-/* The cycle counters. */
-#define VMI_CYCLES_REAL         0
-#define VMI_CYCLES_AVAILABLE    1
-#define VMI_CYCLES_STOLEN       2
-
-/* The alarm interface 'flags' bits */
-#define VMI_ALARM_COUNTERS      2
-
-#define VMI_ALARM_COUNTER_MASK  0x000000ff
-
-#define VMI_ALARM_WIRED_IRQ0    0x00000000
-#define VMI_ALARM_WIRED_LVTT    0x00010000
-
-#define VMI_ALARM_IS_ONESHOT    0x00000000
-#define VMI_ALARM_IS_PERIODIC   0x00000100
-
-#define CONFIG_VMI_ALARM_HZ	100
-
-#endif /* _ASM_X86_VMI_TIME_H */

arch/x86/kernel/Makefile

@@ -95,7 +95,6 @@ obj-$(CONFIG_AMD_NB)		+= amd_nb.o
 obj-$(CONFIG_DEBUG_RODATA_TEST)	+= test_rodata.o
 obj-$(CONFIG_DEBUG_NX_TEST)	+= test_nx.o
 
-obj-$(CONFIG_VMI)		+= vmi_32.o vmiclock_32.o
 obj-$(CONFIG_KVM_GUEST)		+= kvm.o
 obj-$(CONFIG_KVM_CLOCK)		+= kvmclock.o
 obj-$(CONFIG_PARAVIRT)		+= paravirt.o paravirt_patch_$(BITS).o

arch/x86/kernel/paravirt.c

@@ -413,7 +413,6 @@ struct pv_mmu_ops pv_mmu_ops = {
 
 	.alloc_pte = paravirt_nop,
 	.alloc_pmd = paravirt_nop,
-	.alloc_pmd_clone = paravirt_nop,
 	.alloc_pud = paravirt_nop,
 	.release_pte = paravirt_nop,
 	.release_pmd = paravirt_nop,

arch/x86/kernel/setup.c

@@ -83,7 +83,6 @@
 #include <asm/dmi.h>
 #include <asm/io_apic.h>
 #include <asm/ist.h>
-#include <asm/vmi.h>
 #include <asm/setup_arch.h>
 #include <asm/bios_ebda.h>
 #include <asm/cacheflush.h>
@@ -691,10 +690,10 @@ void __init setup_arch(char **cmdline_p)
 	printk(KERN_INFO "Command line: %s\n", boot_command_line);
 #endif
 
-	/* VMI may relocate the fixmap; do this before touching ioremap area */
-	vmi_init();
-
-	/* OFW also may relocate the fixmap */
+	/*
+	 * If we have OLPC OFW, we might end up relocating the fixmap due to
+	 * reserve_top(), so do this before touching the ioremap area.
+	 */
 	olpc_ofw_detect();
 
 	early_trap_init();
@@ -795,9 +794,6 @@ void __init setup_arch(char **cmdline_p)
 
 	x86_report_nx();
 
-	/* Must be before kernel pagetables are setup */
-	vmi_activate();
-
 	/* after early param, so could get panic from serial */
 	reserve_early_setup_data();
 

arch/x86/kernel/smpboot.c

@@ -63,7 +63,6 @@
 #include <asm/tlbflush.h>
 #include <asm/mtrr.h>
 #include <asm/mwait.h>
-#include <asm/vmi.h>
 #include <asm/apic.h>
 #include <asm/setup.h>
 #include <asm/uv/uv.h>
@@ -312,7 +311,6 @@ notrace static void __cpuinit start_secondary(void *unused)
 	__flush_tlb_all();
 #endif
 
-	vmi_bringup();
 	cpu_init();
 	preempt_disable();
 	smp_callin();

arch/x86/kernel/vmiclock_32.c

-/*
- * VMI paravirtual timer support routines.
- *
- * Copyright (C) 2007, VMware, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/cpumask.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-
-#include <asm/vmi.h>
-#include <asm/vmi_time.h>
-#include <asm/apicdef.h>
-#include <asm/apic.h>
-#include <asm/timer.h>
-#include <asm/i8253.h>
-#include <asm/irq_vectors.h>
-
-#define VMI_ONESHOT  (VMI_ALARM_IS_ONESHOT  | VMI_CYCLES_REAL | vmi_get_alarm_wiring())
-#define VMI_PERIODIC (VMI_ALARM_IS_PERIODIC | VMI_CYCLES_REAL | vmi_get_alarm_wiring())
-
-static DEFINE_PER_CPU(struct clock_event_device, local_events);
-
-static inline u32 vmi_counter(u32 flags)
-{
-	/* Given VMI_ONESHOT or VMI_PERIODIC, return the corresponding
-	 * cycle counter. */
-	return flags & VMI_ALARM_COUNTER_MASK;
-}
-
-/* paravirt_ops.get_wallclock = vmi_get_wallclock */
-unsigned long vmi_get_wallclock(void)
-{
-	unsigned long long wallclock;
-	wallclock = vmi_timer_ops.get_wallclock(); // nsec
-	(void)do_div(wallclock, 1000000000);       // sec
-
-	return wallclock;
-}
-
-/* paravirt_ops.set_wallclock = vmi_set_wallclock */
-int vmi_set_wallclock(unsigned long now)
-{
-	return 0;
-}
-
-/* paravirt_ops.sched_clock = vmi_sched_clock */
-unsigned long long vmi_sched_clock(void)
-{
-	return cycles_2_ns(vmi_timer_ops.get_cycle_counter(VMI_CYCLES_AVAILABLE));
-}
-
-/* x86_platform.calibrate_tsc = vmi_tsc_khz */
-unsigned long vmi_tsc_khz(void)
-{
-	unsigned long long khz;
-	khz = vmi_timer_ops.get_cycle_frequency();
-	(void)do_div(khz, 1000);
-	return khz;
-}
-
-static inline unsigned int vmi_get_timer_vector(void)
-{
-	return IRQ0_VECTOR;
-}
-
-/** vmi clockchip */
-#ifdef CONFIG_X86_LOCAL_APIC
-static unsigned int startup_timer_irq(unsigned int irq)
-{
-	unsigned long val = apic_read(APIC_LVTT);
-	apic_write(APIC_LVTT, vmi_get_timer_vector());
-
-	return (val & APIC_SEND_PENDING);
-}
-
-static void mask_timer_irq(unsigned int irq)
-{
-	unsigned long val = apic_read(APIC_LVTT);
-	apic_write(APIC_LVTT, val | APIC_LVT_MASKED);
-}
-
-static void unmask_timer_irq(unsigned int irq)
-{
-	unsigned long val = apic_read(APIC_LVTT);
-	apic_write(APIC_LVTT, val & ~APIC_LVT_MASKED);
-}
-
-static void ack_timer_irq(unsigned int irq)
-{
-	ack_APIC_irq();
-}
-
-static struct irq_chip vmi_chip __read_mostly = {
-	.name 		= "VMI-LOCAL",
-	.startup 	= startup_timer_irq,
-	.mask	 	= mask_timer_irq,
-	.unmask	 	= unmask_timer_irq,
-	.ack 		= ack_timer_irq
-};
-#endif
-
-/** vmi clockevent */
-#define VMI_ALARM_WIRED_IRQ0    0x00000000
-#define VMI_ALARM_WIRED_LVTT    0x00010000
-static int vmi_wiring = VMI_ALARM_WIRED_IRQ0;
-
-static inline int vmi_get_alarm_wiring(void)
-{
-	return vmi_wiring;
-}
-
-static void vmi_timer_set_mode(enum clock_event_mode mode,
-			       struct clock_event_device *evt)
-{
-	cycle_t now, cycles_per_hz;
-	BUG_ON(!irqs_disabled());
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	case CLOCK_EVT_MODE_PERIODIC:
-		cycles_per_hz = vmi_timer_ops.get_cycle_frequency();
-		(void)do_div(cycles_per_hz, HZ);
-		now = vmi_timer_ops.get_cycle_counter(vmi_counter(VMI_PERIODIC));
-		vmi_timer_ops.set_alarm(VMI_PERIODIC, now, cycles_per_hz);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		switch (evt->mode) {
-		case CLOCK_EVT_MODE_ONESHOT:
-			vmi_timer_ops.cancel_alarm(VMI_ONESHOT);
-			break;
-		case CLOCK_EVT_MODE_PERIODIC:
-			vmi_timer_ops.cancel_alarm(VMI_PERIODIC);
-			break;
-		default:
-			break;
-		}
-		break;
-	default:
-		break;
-	}
-}
-
-static int vmi_timer_next_event(unsigned long delta,
-				struct clock_event_device *evt)
-{
-	/* Unfortunately, set_next_event interface only passes relative
-	 * expiry, but we want absolute expiry.  It'd be better if were
-	 * were passed an absolute expiry, since a bunch of time may
-	 * have been stolen between the time the delta is computed and
-	 * when we set the alarm below. */
-	cycle_t now = vmi_timer_ops.get_cycle_counter(vmi_counter(VMI_ONESHOT));
-
-	BUG_ON(evt->mode != CLOCK_EVT_MODE_ONESHOT);
-	vmi_timer_ops.set_alarm(VMI_ONESHOT, now + delta, 0);
-	return 0;
-}
-
-static struct clock_event_device vmi_clockevent = {
-	.name		= "vmi-timer",
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 22,
-	.set_mode	= vmi_timer_set_mode,
-	.set_next_event = vmi_timer_next_event,
-	.rating         = 1000,
-	.irq		= 0,
-};
-
-static irqreturn_t vmi_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &__get_cpu_var(local_events);
-	evt->event_handler(evt);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction vmi_clock_action  = {
-	.name 		= "vmi-timer",
-	.handler 	= vmi_timer_interrupt,
-	.flags 		= IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER,
-};
-
-static void __devinit vmi_time_init_clockevent(void)
-{
-	cycle_t cycles_per_msec;
-	struct clock_event_device *evt;
-
-	int cpu = smp_processor_id();
-	evt = &__get_cpu_var(local_events);
-
-	/* Use cycles_per_msec since div_sc params are 32-bits. */
-	cycles_per_msec = vmi_timer_ops.get_cycle_frequency();
-	(void)do_div(cycles_per_msec, 1000);
-
-	memcpy(evt, &vmi_clockevent, sizeof(*evt));
-	/* Must pick .shift such that .mult fits in 32-bits.  Choosing
-	 * .shift to be 22 allows 2^(32-22) cycles per nano-seconds
-	 * before overflow. */
-	evt->mult = div_sc(cycles_per_msec, NSEC_PER_MSEC, evt->shift);
-	/* Upper bound is clockevent's use of ulong for cycle deltas. */
-	evt->max_delta_ns = clockevent_delta2ns(ULONG_MAX, evt);
-	evt->min_delta_ns = clockevent_delta2ns(1, evt);
-	evt->cpumask = cpumask_of(cpu);
-
-	printk(KERN_WARNING "vmi: registering clock event %s. mult=%u shift=%u\n",
-	       evt->name, evt->mult, evt->shift);
-	clockevents_register_device(evt);
-}
-
-void __init vmi_time_init(void)
-{
-	unsigned int cpu;
-	/* Disable PIT: BIOSes start PIT CH0 with 18.2hz peridic. */
-	outb_pit(0x3a, PIT_MODE); /* binary, mode 5, LSB/MSB, ch 0 */
-
-	vmi_time_init_clockevent();
-	setup_irq(0, &vmi_clock_action);
-	for_each_possible_cpu(cpu)
-		per_cpu(vector_irq, cpu)[vmi_get_timer_vector()] = 0;
-}
-
-#ifdef CONFIG_X86_LOCAL_APIC
-void __devinit vmi_time_bsp_init(void)
-{
-	/*
-	 * On APIC systems, we want local timers to fire on each cpu.  We do
-	 * this by programming LVTT to deliver timer events to the IRQ handler
-	 * for IRQ-0, since we can't re-use the APIC local timer handler
-	 * without interfering with that code.
-	 */
-	clockevents_notify(CLOCK_EVT_NOTIFY_SUSPEND, NULL);
-	local_irq_disable();
-#ifdef CONFIG_SMP
-	/*
-	 * XXX handle_percpu_irq only defined for SMP; we need to switch over
-	 * to using it, since this is a local interrupt, which each CPU must
-	 * handle individually without locking out or dropping simultaneous
-	 * local timers on other CPUs.  We also don't want to trigger the
-	 * quirk workaround code for interrupts which gets invoked from
-	 * handle_percpu_irq via eoi, so we use our own IRQ chip.
-	 */
-	set_irq_chip_and_handler_name(0, &vmi_chip, handle_percpu_irq, "lvtt");
-#else
-	set_irq_chip_and_handler_name(0, &vmi_chip, handle_edge_irq, "lvtt");
-#endif
-	vmi_wiring = VMI_ALARM_WIRED_LVTT;
-	apic_write(APIC_LVTT, vmi_get_timer_vector());
-	local_irq_enable();
-	clockevents_notify(CLOCK_EVT_NOTIFY_RESUME, NULL);
-}
-
-void __devinit vmi_time_ap_init(void)
-{
-	vmi_time_init_clockevent();
-	apic_write(APIC_LVTT, vmi_get_timer_vector());
-}
-#endif
-
-/** vmi clocksource */
-static struct clocksource clocksource_vmi;
-
-static cycle_t read_real_cycles(struct clocksource *cs)
-{
-	cycle_t ret = (cycle_t)vmi_timer_ops.get_cycle_counter(VMI_CYCLES_REAL);
-	return max(ret, clocksource_vmi.cycle_last);
-}
-
-static struct clocksource clocksource_vmi = {
-	.name			= "vmi-timer",
-	.rating			= 450,
-	.read			= read_real_cycles,
-	.mask			= CLOCKSOURCE_MASK(64),
-	.mult			= 0, /* to be set */
-	.shift			= 22,
-	.flags			= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int __init init_vmi_clocksource(void)
-{
-	cycle_t cycles_per_msec;
-
-	if (!vmi_timer_ops.get_cycle_frequency)
-		return 0;
-	/* Use khz2mult rather than hz2mult since hz arg is only 32-bits. */
-	cycles_per_msec = vmi_timer_ops.get_cycle_frequency();
-	(void)do_div(cycles_per_msec, 1000);
-
-	/* Note that clocksource.{mult, shift} converts in the opposite direction
-	 * as clockevents.  */
-	clocksource_vmi.mult = clocksource_khz2mult(cycles_per_msec,
-						    clocksource_vmi.shift);
-
-	printk(KERN_WARNING "vmi: registering clock source khz=%lld\n", cycles_per_msec);
-	return clocksource_register(&clocksource_vmi);
-
-}
-module_init(init_vmi_clocksource);

arch/x86/mm/pgtable.c

@@ -110,10 +110,6 @@ static void pgd_ctor(struct mm_struct *mm, pgd_t *pgd)
 		clone_pgd_range(pgd + KERNEL_PGD_BOUNDARY,
 				swapper_pg_dir + KERNEL_PGD_BOUNDARY,
 				KERNEL_PGD_PTRS);
-		paravirt_alloc_pmd_clone(__pa(pgd) >> PAGE_SHIFT,
-					 __pa(swapper_pg_dir) >> PAGE_SHIFT,
-					 KERNEL_PGD_BOUNDARY,
-					 KERNEL_PGD_PTRS);
 	}
 
 	/* list required to sync kernel mapping updates */

arch/x86/xen/mmu.c

@@ -1969,7 +1969,6 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
 	.alloc_pte = xen_alloc_pte_init,
 	.release_pte = xen_release_pte_init,
 	.alloc_pmd = xen_alloc_pmd_init,
-	.alloc_pmd_clone = paravirt_nop,
 	.release_pmd = xen_release_pmd_init,
 
 #ifdef CONFIG_X86_64